H.264 not working in Live Stream

Hi,
I have a HD Camera streaming a live feed through FME 2.5 to
FMS 3.0 using the VP6 codec and it works fine.
I have now been trying to get the same stream running via
H.264 and althogh FME 2.5 connects to the FMS 3.0 server and the
stream starts with FMS 3.0 reporting the stream no problem.
The Client application crerated with Captivate 3 using Flash
Player 9 for publishing no longer dispays the video.
Switching back to VP6 works again.
Any one have any idea what I should be doing?
Cheers

Thanks for the quick response, I checked with our Admin guys
and it indeed 3.0.0.
So I will update immediately.
Is there a big advantage to using H.264 over VP6 for live
streaming?
I have another forum question that went unanswered relating
to this issue asking, what are the required recommended settings
for both FMS 3 and FME 2.5 to reduce any lagging in video on a 1gb
LAN which should not have any?
cheers again

Similar Messages

H.264 not working with QT

H.264 streaming does not work with QuickTime instead a green screen pops up. I can watch the camera (Axis P1343 network cam) using Motion JPEG stream profile but not H.264. The camera LiveView is set up to use QT but QT does not respond. I know this issue has been discussed before and a lot of literature exists on this subject on line. Has a solution been found? My computer is a MacBook Pro running Snow Leopard 10.6.8.
Any advise will be greatly appreciated.

Thanks for the quick response, I checked with our Admin guys
and it indeed 3.0.0.
So I will update immediately.
Is there a big advantage to using H.264 over VP6 for live
streaming?
I have another forum question that went unanswered relating
to this issue asking, what are the required recommended settings
for both FMS 3 and FME 2.5 to reduce any lagging in video on a 1gb
LAN which should not have any?
cheers again

Is it normal that menu is not working on live site under BC secure link?

Is it normal that menu is not working on live site? It works only on my computer but not on customer's. I should apply seperate secured links for each sub-section for preview. Will it change when real domain name will be set?
Here is my page http://2kenergy.worldsecuresystems.com/index.html

Well said, Cyclosaurus.
There's a ton of people here who really appreciate
your help; I am one of them.
Mark
Thanks Mark, I try. And I welcome when people have better things to say and offer. They always can reply to the OP, not me.
I DO NOT APPRECIATE when someone trying to jack my post, I don't care for his chit-chat or bantering. All that ended LONG ago, if you know what I mean

Please suggest driver for microsoft lifecam studio for to work with live stream procaster

I have microsoft life cam studio using to broadcast live through live stream procastrer. I am using mac mini with mac os lion 64bit.But default driver for this studio cam is not supporting to go live with proper crop and quality settings. Can anyone provide driver for this camera ?

Hi, no idea really, but perhaps see if this could work for what you want...
http://www.google.com/url?q=http://www.bensoftware.com/securityspy/&sa=U&ei=QUGH T4z4K4WciQL436yGAw&ved=0CBEQFjAA&usg=AFQjCNEC9fzmWGOiPtM0kRHyzfST3Kh5jQ

InDesign XMP Not Working with Live Caption

I have images in InDesign CS5 (Mac OS X 10.6..), and although they have XMP data (Set from Bridge), when I set with Live Caption, my caption always says "<No data from link>". I've set up captions in Objects > Captions... > Caption Setup - metadata to "Description" and the XMP data doesn't get put into the caption. I can see the XMP information in Links > Image > XMP File Info... "Description". That's Fine. I've tried other user-defined fields, "Title, Keywords" and none work in Live Caption. I've also been updating the images after setting the XMP data in Bridge. I've also just deleted the images and re-placed them. Still can't get live caption to work.
I also saw a related thread where a user set file XMP via photoshop (CS5), which I also tried. When I do that, InDesign CS5 doesn't see the XMP data (via Links > XMP File Info). I can see it if set via Bridge, but can't make Live Caption work. If I set XMP via Photoshop, I can't see XMP data, and naturally can't set Live Caption.
I could have done my project 5 times manually by now - but the fact this isn't working has been driving me crazy. Wondered if anyone has seen this or, hopefully, got it to work. And am I doing something wrong?
Thanks,
Matt

I think this is a bug - probably in Photoshop (though the various engineering teams may disagree on this ).
Here's what I did:
Opened a TIFF image in Photoshop CS5, and confirmed that it had "Description" metadata.
Placed it in InDesign CS5 and created a live caption which DID work.
Saved the image as a PNG using "Save for Web and Devices" in Photoshop CS5 with metadata set to "All".
Placed that PNG in InDesign CS5, and found that a live caption did NOT work
Examined the PNG image in Bridge CS5, and found that the description WAS shown
Opened the PNG image in Photoshop CS5, and found that the description field was empty (in fact all fields were).
Looked at the "Raw Data" section in the File Info dialog box in Photoshop, and found that it was essentially empty.
Opened the PNG in a hex editor, and found that the missing metadata WERE there, but somehow must be formatted/structured in a slightly incorrect way which somehow prevents Photoshop and InDesign from properly parsing the XML, but not so far afield as to prevent Bridge from doing so.
I would suggest filing a bug report against Photoshop CS5 since it cannot read the metadata that one of its own components wrote into the file.

MediaPlayer.state - playing state not reported for live stream

I am listening for the MEDIA_PLAYER_STATE_CHANGE event on mediaPlayer to control the display of a buffering graphic. When playing back a recorded video I catch a mediaPlayer.state equal to "buffering" followed by a state equal to "playing". However, when playing back a Live stream I get the "buffering" state but never see the "playing" state. The Live video is playing but the change event appears to not be sent.
Both videos are streaming from FMS.
Has anyone else seen this? Please let me know if there are additional details you would like to know to help track this down.
Regards,
- michael

Thanks Michael for reporting this problem, a bug is already filed for this issue. You can listen to PLAY_STATE_CHANGE on PlayEvent with Live Stream as a workaround until bug is fixed.

Need license for using H.264 Video codec for live stream with FMS 3.5 series

Hi,
I am creating a live audio-Video chat application in which I use H264 video codec for live streaming. I am using Flash Media Server version 3.5.7. I read some where that H.264 Video streaming using FMS required seperate licencse. So I want to confirm , It is true that H264 video streaming required seperate license? If yes then what is the procedure to get license.
Please let me know its urgent.
Regrads,

Hi Again,
Thanks for your reply.
Here are some articles/posts which says about Royalties to use h264:
http://www.mpegla.com/Lists/MPEG%20LA%20News%20List/Attachments/226/n-10-02-02.pdf 15:27
http://www.mpegla.com/main/programs/AVC/Documents/AVC_TermsSummary.pdf
http://www.streamingmedia.com/Articles/ReadArticle.aspx?ArticleID=65403&PageNum=3
http://www.mpegla.com/main/programs/avc/Documents/AVC_TermsSummary.pdf
According to these, any product/service provider, need to pay one time fee based on # of subscribers if we are using h264 for encoding and is charging fee from its users.
About our business: We are web-conferencing solution tool provider and are using Flash Media Server version 3.5.7. I for audio/video. Please help me out if h264 is really free for us or we need to buy license to use that.
Looking forward to hear from you soon.
Regards,

LG G2 mp4/h.264 not working on LG G2

Mp4/h.264 videos(All websites) do not play properly on the LG G2 with KitKat 4.4.1 or 4.4.1. I have tried both the regular Firefox (32.0.3) and Beta(33.0), both seem to be having the issue. Playback works fine using mobile Chrome. Please also note, I am not using Flash player, these are standard html5 videos.
Here is an example: http://www.quirksmode.org/html5/tests/video.html
Screenshot of video(on device): http://postimg.org/image/enohww7nj/
WebM and Ogg/Theora play fine.
about:support info:
Application Basics
Name: Fennec
Version: 33.0
User Agent: Mozilla/5.0 (Android; Mobile; rv:33.0)
Gecko/33.0 Firefox/33.0
Graphics
Adapter Description Model: VS980 4G, Product: g2_vzw, Manufacturer: LGE, Hardware: g2, OpenGL: Qualcomm -- Adreno (TM) 330 -- OpenGL ES 3.0 [email protected] AU@ (CL@)
Device ID: Adreno (TM) 330
Driver Version: OpenGL ES 3.0 [email protected] AU@ (CL@)
GPU Accelerated Windows: 1/1 OpenGL (OMTC)
Vendor ID: Qualcomm
WebGL Renderer: Qualcomm -- Adreno (TM) 330
windowLayerManagerRemote: true
AzureCanvasBackend: skia
AzureContentBackend:cairo
AzureFallbackCanvasBackend: none
AzureSkiaAccelerated: 1
Important Modified Preferences
Name Value browser.cache.disk.capacity: 204800
browser.cache.disk.smart_size.first_run: false
browser.startup.homepage_override.mstone: 33.0
dom.mozApps.used: true
extensions.lastAppVersion: 33.0
network.cookie.prefsMigrated: true
plugin.importedState: true
storage.vacuum.last.index: 0

hi battleskull
is this [https://bugzilla.mozilla.org/show_bug.cgi?id=1052888 bug 1052888]?
this sounds like an LG specific issue. those videos work fine in Firefox for Android 32 on my Samsung Galaxy S5 and Nexus 5.
I will try and get developer attention onthis.

Server not working on Live server

So I just purchased the flash media server yesterday and
migrated the files and applications to the live site. And things
just wont work. I have encoded videos in the definst folder, but
nothing shows up. The site takes a really long time to load and
often crashes my firefox. I have verified that the server is
running and all the services are running. I am using a Red Hat
Linux server. has anyone had this problem or does anyone have a
suggestion to trouble shoot this problem.
Also i cannot log into the admin console i am using the
correct user and pwd.

From what you describe, I suspect there might be firewall
getting in the way. Did you open port 1935 on your server firewall?
By default, the flashplayer will connecting to FMS on port
1935. If 1935 fails, the flashplayer will attempt to connect on
port 80. It takes a while for the second attempt to happen, so that
would explain the lag in the connecting being accepted.
I'm not sure why firefox is crashing, but that wouldn't be
caused by a server issue. Is there something in your actionscript
that might cause the flashplayer to crash if the netconnection
isn't accepted? Perhaps a conditional that results in an infinite
loop?
About the admin service... are you sure it's running and
there's no firewall blocking port 1111? Try entering this into your
browser:
http://[server ip or hostname]:1111
If the service responds with an XML file, it's running.

Sync is not working for Photo Stream

I am using a PC and I have manually uplaoded pictures to my upload folder which are then not showing up on my iPhone. It has worked in the past. Also, I am new to Apple.

Managed to solve the issues by turning off icloud drive. Re-started iphone. After iphone turned on, turn on icloud drive again. All the apps started to sync again.

Horizontal menu bar (spry) not working in live view

action taken - simply add a horizontal spry menu to
a blank page, then go to live view.....
when select "item 1" - item 2 briefly disappears...any thoughts - this is making me nuts! pls email me at [email protected]
here is the code
<%@LANGUAGE="JAVASCRIPT" CODEPAGE="65001"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>Untitled Document</title>



<style type="text/css">

</style>
<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
</head>
<body>
<ul id="MenuBar1" class="MenuBarHorizontal">
    <li><a class="MenuBarItemSubmenu" href="#">Item 1</a>
        <ul>
            <li><a href="#">Item 1.1</a></li>
            <li><a href="#">Item 1.2</a></li>
            <li><a href="#">Item 1.3</a></li>
        </ul>
    </li>
    <li><a href="#">Item 2</a></li>
    <li><a class="MenuBarItemSubmenu" href="#">Item 3</a>
        <ul>
            <li><a class="MenuBarItemSubmenu" href="#">Item 3.1</a>
                <ul>
                    <li><a href="#">Item 3.1.1</a></li>
                    <li><a href="#">Item 3.1.2</a></li>
                </ul>
            </li>
            <li><a href="#">Item 3.2</a></li>
            <li><a href="#">Item 3.3</a></li>
        </ul>
    </li>
    <li><a href="#">Item 4</a></li>
</ul>
<script type="text/javascript">

</script>
</body>
</html>

You will have better luck here in the Forum if you can post a link to your page. Just the HTML doesn't give us enough information; we need to see the CSS stylesheets as well, and in context...working...it's easier to pin down.
Beth

Image swap not working once live

So I have made some webpages in fireworks then imported the code to dreamweaver. Everything works fine when it is local. I then try to put it onto the website, where it comes up, everything works except the image swap behavior. This is the page:
http://community.dur.ac.uk/foundation.science/?q=node/619
HERE is meant to change colour on rollover and words are meant to turn up on rolling over the cliffs. The links haven't been sorted yet in the code, so they are all still dead ends (but do appear to work in principle.
This is one of the pieces of code for the swapping images:
<tr>
   <td rowspan="3"><img name="Harbour_r5_c6" src="http://community.dur.ac.uk/foundation.science/Staithes/Harbour_r5_c6.png" width="151" height="76" id="Harbour_r5_c6" alt="" /></td>
   <td colspan="2"><a href="Harbour pano - zoomed in.htm" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('Harbour_r5_c7','','Harbour_r5_c7_s2.png',1);"><img name="Harbour_r5_c7" src="http://community.dur.ac.uk/foundation.science/Staithes/Harbour_r5_c7.png" width="113" height="44" id="Harbour_r5_c7" alt="" /></a></td>
   <td rowspan="3"><img name="Harbour_r5_c9" src="http://community.dur.ac.uk/foundation.science/Staithes/Harbour_r5_c9.png" width="205" height="76" id="Harbour_r5_c9" alt="" /></td>
   <td><img src="http://community.dur.ac.uk/foundation.science/Staithes/spacer.gif" width="1" height="44" alt="" /></td>
</tr>
Thanks for any help you can give me, I'm really not used to this
Thanks
Hannah

You have a fair number of major structural errors in your html that need to be repaired. Run your page through the validator at http://validator.w3.org and clean those up, especially the extra <body> and <head> tags.
I'm not sure if maybe your page is being constructed by server side includes that have some extra code in them or if something else is going on, but it could be the root of your problems.
If you clear up the coding errors and it still doesn't work, post back and we can take a closer look at the clean code.

Serial number not working. Live chat people can't help. Please help! Thank you.

I was given a link to re-install PSE 7 by the live chat team because my PC had to be wiped following a crash. Now I can't activate it as the serial number comes up invalid. Got back to the live chat people who say they can't deal with this because it's not the latest version. Their advice was to post here, so that a more specialised team member would reply. Therefore, can someone please help??

The exact words were: "As version of the product is old, we will not be able to predict how the activation will be". Is that your experience too??

"This computer does not support iTunes live streaming." Help?

Just trying to catch up with the iTunes Festival, but for some reason when I click on the videos in the iTunes store, that little notification about "This computer...." shows up.
What should I do?

I am trying to figure this out too.
this is what I have tried so far
- using the iPhone app I was able to watch Adele live on my iPhone 4.
- on my Windows 7 PC, using the same itunes account as on my phone, I was able to watch the reply of Adele.
but, while on my work Computer (Windows Vista) and using the same itunes account as mentioned above, I am unable to view the Adele replay.
both PC's are running iTunes 10.3.1 and using the same iTunes account. The difference is the Windows version, but you post says you are using Windows 7, which I was able to get the reply to work on.
I am in Canada.

Getahead DWR not working on Live Server (Godaddy)

Hi guys,
I would like to know if anyone here ever faced this problem?
It seems that it got to do with some proxy problem.
I couldn't get dwr working on a shared hosting.

Proxy Configuration:
You have to set the following properties :
http.proxyHost (default: <none>)
http.proxyPort (default: 80 if http.proxyHost specified)
http.nonProxyHosts (default: <none>)You can set the required properties when starting the JVM for a JAVA application from the command line:java -Dhttp.proxyhost=myproxyserver.com -Dhttp.proxyport=80 MyJavaAppOr in your source :import java.util.Properties;
Properties systemSettings = System.getProperties();
systemSettings.put("http.proxyHost", "myProxyServer.com");
systemSettings.put("http.proxyPort", "80");
System.setProperties(systemSettings);You might need to identify yourself to the proxy server.
One way is to use the HTTP property "Proxy-Authorization" with a username:password base64 encoded.
Properties systemSettings = System.getProperties();
System.setProperties(systemSettings);
URL url=new URL("http://someserver/somepage");
URLConnection uc = url.openConnection ();
String encoded = new String
      (Base64.base64Encode(new String("username:password").getBytes()));
uc.setRequestProperty("Proxy-Authorization", "Basic " + encoded);
uc.connect();Or set the properties
System.setProperty ("http.proxyUserName",username);
System.setProperty ("http.proxyPassword",password);The http.nonProxyHosts property indicates the hosts which should be connected too directly and not through the proxy server. The value can be a list of hosts, each seperated by a |, and in addition a wildcard character (*) can be used for matching.
java.exe
   -Dhttp.nonProxyHosts="*.mycompany.com|*.mycompany.local|localhost"
      MyClassfor further information :
http://java.sun.com/j2se/1.4.2/docs/guide/net/properties.html
http://www.java.com/en/download/help/proxy_setup.xml

H.264 not working in Live Stream

Similar Messages

Maybe you are looking for