H.264 recording through QT Pro

ver 7.6 prefs allow you to record in h.264. BUT, online tutorial suggests that file must still be de-interlaced by another app (like Compressor)before being streamed. If file is already an M4v from QT Pro, how would you accomplish this in 1 pass??? Must the de-interlacing take place after capture/record?

If the problem were based on the original VHS recording (stretched taped, mechanical rollers, tracking drifts, etc), I'm sure I would see this when playing back the VHS recordings. As I mentioned, the sync problems do not occur when using iMovie, only when using Quicktime Pro as the recorder. I then export the movie to the H.264 format for iPod and iTunes and the result is a perfectly synced movie. I don't mind using this process; it just seems to be a huge waste of time when Quicktime can record directly to this format without any exporting (about a 3 hour process). So we're back to the question -- is there a basic flaw in Quicktime that would cause these videos to go out of sync when iMovie does not have that problem (even though iMovie uses Quicktime as its video engine)
The reason I would not run out and buy the DVD's is I'm not looking to watch these on TV --- my kids are now in High School and college - but they'd love to have some of these they can watch on their laptops or video iPods. My daughter still loves 101 Dalmations even though she's 19. AT $20 a pop, I'm also not eager to spend the $1200 on the 60 or so tapes my kids have collected over the years. Also, my household is trying to downsize and get rid of the boxes of "stuff" that have collected everywhere. These 4 file boxes full of kids videos will be getting donated to a day care center as soon as they are transferred.

Similar Messages

  • I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic but Logic won't send midi data out to the MOTU Traveller to the Piano Disc player

    Hello All,
    I can record midi data from my Mason & Hamlin Piano Disc Pro Record through my MOTU Traveller into Logic Pro 9.1.8  but Logic won't send the midi data back out to the MOTU Traveller and thus to the Piano Disc player. I got it to playback one time but have no idea how and when it did it was looping or something because the velocity was way high coming back in and the damper pedal was slamming down. When I play a key on the piano the midi "in" light on the Traveller lights up. When I play the track back on my computer no lights blink on the Traveller and when I did the apple midi studio test in utilities when I play a key I get the confirmation signal noise and the Traveller blinks when I click on the down arrow of the Traveller in the Apple midi studio test the midi out light on the traveller never lights and the signal light on the piano does not blink either. No outbound signal at all...
    I have messed with every possible parameter I can find and and have had help from one of Piano Disc's premier editors but no luck. The piano was prepped for me on Logic so it would work with my studio.  I'm positive it's my fault and I'm overlooking something really simple and stupid but what!??!
    Somebody please help.  Thank you all in advance for ANY ideas you might have!

    Blues Piano,
    I'm not sure if this will be a help or not.  I'm so Logic Pro wet behind the ears that I make newbies look experienced.  However, I'm not expecting many on the Apple support forums have a PianoDisc system, much less one with the new optical record strip.  While I don't have any record strip on my PianoDisc, I do have a PianoDisc iQ that's only a month old.  I've been playing converted paper scrolls from hundred year old player pianos through it via the MIDI in port of the PianoDisc CPU.  I've found I have to open the MIDI file in Logic Pro (10.0.4) then go to <Track><New External MIDI Track> then copy the existing track to that new external track.  Only then can I see in the Track inspector (defaults left side of screen with the Icon for the instrument) the "Port" parameter.  Then I can select my external MIDI device in that Port selector. 
    I've also encountered problems with the PianoDisc not using enough force on the notes or using too much force.  To get around this problem, until I understand Logic better, I've been setting minimum and maximum volicities.  To do that I right click on the track and select "Select All."  Then I right click again and select "MIDI" then "MIDI Transform"  then "Velocity Limiter."  In the resulting pop up window in the center is a drop down and you can play with the velocity from "MIN" to "MAX" along with "ADD" "SUBTRACT" etc. 
    I hope this helps.  I envy you your Mason & Hamlin.  If you need more help on this just email me at pfleischmann at mac dot com.

  • How do I record through Line in on Macbook Pro 13"?

    How do I record through Line in on Macbook Pro 13"?
    Do I need special software?
    How to change the setup?
    Shlomo

    Shlomofromoh wrote:
    How do I record through Line in on Macbook Pro 13"?
    Let me be sure I understand what you need. You want to connect an audio device to the Audio In port of your MBP and record its output with the MBP.
    If that's correct, what you need is audio editing software. You can use GarageBand, which probably came bundled with your MBP, but it's a bit heavy for that purpose alone. A better tool is the free audio editor Audacity. It's powerful and cross-platform, which means that it's a little rougher around the edges than is usually the case with Mac software, but you can't beat the price. There are others (Sound Studio, Amadeus Pro, TwistedWave, Wave Editor, and more), but you can get going with Audacity.

  • Recording Kontakt through Logic Pro x?

    I want to record Kontakt 5 instruments through Logic Pro X, but the Setting and Instrument buttons are not showing in the Inspector. In all the tutorials that I have seen, you click the Instrument button in the Inspector and select Kontakt as you instrument. Is there a setting in Logic to show these buttons? I am using Kontakt 5 Player right now, do I have to have the full version for it to work? I used to do this with Garageband all the time. And also, I am a hardcore noob, so simple terms are much appreciated!!

    hi i use a midi to usb cable from ebay then do this really easy
    https://www.youtube.com/watch?v=f8o0cNw07YE

  • I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

    I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
    Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
    Ken

    MUYconfundido wrote:
    Pancenter,
    Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
    The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
    Thoughts?
    Thanks,
    Tristan
    Tristan...
    This is what you have, correct?
    http://www.alesis.com/usbmidicable
    This from Alesis..
    "The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
    Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
    My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
    pancenter-

  • Cannot record through line-in in bootcamp MBP late summer '09 model

    cannot record through line-in in bootcamp MBP late summer '09 model
    audio source (mp3 player) <3.5mm male input-------------3.5mm male input>  line-in to macbook pro late summer 2009 model bootcamp windows xp sp2
    when i select microphone in the audio panel - it works
    when i select line-in and plug in the 3.5mm jack input to 3.5mm jack input to a fm radio for ex. it doesn't work
    how do i make the line-in work?
    i remember that when i first installed mac osx sl and windows xp bootcamp - the first couple of times around when partitioning the hd - the line-in worked a couple of times, in between times somewhere along the line i made some change to the spdif settings ?? or driver / to make the red light that comes on in the line-in jack go away -  the other method was to use a toothpick to push a tiny button inside the jack, did that once -but the redlight came back again after a restart on bootcamp side.
    thanks in advance,
    -r

    Although I don't use it, the Line-Input jack should require a signal about 40dB higher than what a microphone alone puts out. If your cable only adapts the connector and does not provide amplification, I'm not surprised you get nothing. If you are lucky, you MIGHT get a low signal by going into System Prefs/Sound/input/line-in and turning the input level slider all the way up. But the real answer to to get a mike preamp or mixer, or a mike with line-level output. Some products take a mike input and convert it to digital into the USB port.

  • How to fix the signal with the microphone to the computer when recording through an interface? every time i record and play back i get poor signal and a lot of fuzz

    How to fix the signal from the microphone to the computer when recording through an interface in logic pro? Every time i record and playback i get poor signal and a lot of fuzz.. how can i fix this problem?

    Which model computer?
    What operating system?

  • Trying to record through soundboard in Sound Studio?

    Hi all-
    I have been trying to record an audio clip into Sound Studio 2.2.4. The default is for the MacBook Pro to play the clip through the speakers and for Sound Studio to record through the microphone, in which case I can get good levels but the recording is echo-ey and bad. When I switch to the only other source option, Built-in Input, I get no signal or levels in Sound Studio at all.
    Am I doing something foolish? Does SS not have this capacity? Or do Macs not use the soundboard the way a PC does? Any help would be appreciated!
    Thanks,
    Matthew

    I have a very similar problem on my iMac. I've tried 3 sound programs and none of them can record internally, without having to resort to speakers out mic in. Each program has an option for internally recording but the problem appears to be my own sound preferences as they just list the mic, the line in and a blue tooth device called LAVINIA that I know nothing about!

  • Logic X won't record through my interface, in-built microphone constantly on

    Installed Logic X on my Macbook Pro, everything seems to work ok but when I try and record Logic is picking up sound through the in-built microphone even though my external interface is selected in the audio preferences box as the input. I tried to see if Logic 9 was working ok and now the same thing is happening in Logic 9, and I've never ever had this problem before. I've tried re-installing the interface's drivers and making sure they're up to date and I've also tried making sure that the input and output for the laptop sound in general is set to the external device (which is an Edirol UA-25) but still every time I hit record it records through the in-built mic but the sound comes out of the Edirol. I really cannot figure out what the issue is, somebody please help, the worst part is that installing Logic X seems to have caused this issue with Logic 9 and now I can't use either.

    maskeda wrote:
    I got it, some how it was a MIDI track and not an audio track.
    "Some How"?     as in:  user error? 

  • Having trouble signing into Story through Premiere Pro CC

    Hi all,
    I'm having an issue signing into Story through Premiere Pro. I'd like to attach a transcript saved on story to a clip in premiere pro to be able to eventually use speech analysis. And the tutorials online suggested going to window and opening adobe story panel. Once I do that, I'm prompted to sign in with my adobe account, but my adobe email and password combination gives me an error message: The password you entered does not match your Adobe ID.
    Does anyone know a solution or work around to this? It seems like it should be so straightforward...

    Ah. Hmmm. I am an Android user and Premiere Pro likes my video just fine.
    Is there a way to convert the iPhone video to constant fps, or is there a setting that records it that way?
    Edit: if somebody would send me a link to some iPhone 5 video that I could download and mess around with, I would appreciate it.
    Edit: Couldn't Quicktime be used to convert it to a contant frame rate?

  • Some fields are missing while recording through shdb

    Dear Abapers,
                   I am doing bdc for F-27 t.code.Some fields,cobl-gsber(business area),cobl-kostl(Cost center) are missing while recording through SHDB.But when do it manualy the fields are displaying.Also i have ddded those fields manualy in the program,stll the fields are not getting captured.May anyone pls help me,why this problem is happening?What is the solution for this.
    Thanks in Advance.

    hi
    i can tell u that few transactions wont suffice us with BDC,so for such transactions we do bdc with similar kind of transactions.
    ie., The transactions FB60 and f-63 both are meant for Parking.
    But we cant do bdc for FB60 Parking. So we do bdc for f-63.
    similarly when we do bdc for vendor few fields wont appear...in that case, we use bapi for it....
    So try to find an appropriate bapi or similar tcode which will suffice ur need
    hope its clear.
    Regards
    Sajid

  • Trying to record through line in no wo

    Hey, I am using a sound blaster li've sound card and want to record through the line in port on the back. I have bought a convertor which has allowed me to plug my guitar into the line in however when i play nothing comes out and my recording programs don't reconize the line in. Nothing is muted so that is not the problem. If anyone could help me out i would greatly appreciate it thanks.

    yeah i have a similar problem when recording through my microphone. I like to play my little guitar, sing my little songs anre record them via microphone. I noticed, no sound. I had the volume turned down as to prevent the annoying "squuueeeeeeeeeel". but i noticed when i turn my speaker volume up, it records.. but then i get the occational "squeeeeeeeeel" hmm. i'm starting to notice, i'm having all sorts of problems with thsi card. lol

  • Results Recording through QE 11  - Determine one MIC w.r.t another MIC

    Hi All,
    While doing Results Recording through QE11, one MIC (Say 'T') )needs to be automatically calculated ,whereas it was manually entered until now.
    The value for 'T' should be picked from some Z table depending on some key fields , of whiich another manual MIC (say 'A' )value is a key field.
    I can create the Function module and assign it to the MIC in formula. But I am not sure how to pick up the value for MIC 'A' at run-time.
    Before saving itself, when 'calculate' button near 'T' is pressed, the FM should be triggered and it should use the value for MIC 'A' for picking value for 'T' from Z table.
    Please advise if any FMs/BAPIS are there or any other method.
    An F1 at 'A' yielded field QAQEE-SUMPLUS in 'Result' field and QAMKR-ORIGINAL_INPUT from 'Orig. Val' filed of which both are structure fields.
    Thanks,
    Neethu

    I'm a maybe little late, but i will try to explain my own problem.
    I'm also working for QM.
    I want read data from QAQEE-ORIGINAL_INPUT and i cant and i did succed when i going to see inspection report.
    I just have to make some marks in field Accessories for report and u will get data from this field.
    But, if i want to read the same data in another place in sapscript i have problem.
    It simple i cant get data from structure, is this because the program for form is writen for specific point when it must be write out?
    Sorry for my english.
    Tnx.

  • How to save Custom control records through module pool program ?

    Hi guru ,
    1. How to save Custom control records through module pool program ?
    I wrote multiple lines of record in custom control
    Who to save that records ?
    thanking you.
    Regards,
    Subash.

    Hi,
    can refer following code -
    IN PAI , CODE is as follows-
    *&      Form  editor_output
    FORM editor_output .
    NARRATION1 is name of custom controller
      IF v_editor IS INITIAL.
      Create obejct for custom container
        CREATE OBJECT v_custom_container
          EXPORTING
            container_name              = 'NARRATION1'
          EXCEPTIONS
            cntl_error                  = 1
            cntl_system_error           = 2
            create_error                = 3
            lifetime_error              = 4
            lifetime_dynpro_dynpro_link = 5
            OTHERS                      = 6.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                     WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      Create obejct for the TextEditor control
        CREATE OBJECT v_editor
          EXPORTING
            wordwrap_mode              = cl_gui_textedit=>wordwrap_at_fixed_position
            wordwrap_position          = line_length
            wordwrap_to_linebreak_mode = cl_gui_textedit=>true
            parent                     = v_custom_container
          EXCEPTIONS
            error_cntl_create          = 1
            error_cntl_init            = 2
            error_cntl_link            = 3
            error_dp_create            = 4
            gui_type_not_supported     = 5
            OTHERS                     = 6.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
                     WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDIF.
    ENDFORM.                    " editor_output
    getting textdata in internal table as follows
    *&      Form  create_text
    FORM create_text .
      REFRESH : it_texttable,
                it_text.
      IF v_doc_number IS NOT INITIAL.
        IF v_editor IS NOT INITIAL.
          CALL METHOD v_editor->get_text_as_r3table
            IMPORTING
              table                  = it_texttable
            EXCEPTIONS
              error_dp               = 1
              error_cntl_call_method = 2
              error_dp_create        = 3
              potential_data_loss    = 4
              OTHERS                 = 5.
          IF sy-subrc <> 0.
            MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                       WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ENDIF.
    Now, our final text data is in internal table it_texttable.
    pls, Reward if found helpful.

  • Can I change the fisheye look through premiere pro, from a GoPro camera?

    Can I change the fisheye look through premiere pro, from a GoPro camera?

    That depends, at least in part, on which platform you're. [That and the exact version of Premiere Pro you have are two data points that you should always include...]
    On Windows, Premiere has an effect called Lens Distortion.  I'm not sure what your options are on Mac. If someone else doesn't come along with suggestions for Mac, then Googling "'Premiere Pro" mac fisheye GoPro" yields some promising hits.

Maybe you are looking for