/h - debugging to make system modifiable for tcode OB40

Dear friends ,
We need to update posting keys in the tcode OB40 , but the client is closed. When we type /h to turn ON the debugging we go into debug mode menu Breakpoint > Breakpoint at > Statement > MESSAGE
After press F8 a popup appear and this do not allow us to change the variable to open the system.
Does anyone knows the way to open the system via /h for OB40 ?
best regards,
Ale

Thanks for your reply dear Sandeep.
Well this part of company policy that they only open the client once a month in the weekend, so only in the end of month they will open. We have created 4 change requests and transported to the PRD system but the table T030B has no value for posting strings for certain kind of operations. Our basis team suggest to do this via abap once they cannot open right now the client.
Well we´ll continue to find a better solution.
Thanks.
Alessandro

Similar Messages

What is Make System Settings for Measuring Points and Measurement Documents

Dear PM Guru's,
i have doubht on the above customization section? in which situations we can activate or create new one ? whats its importance, how its impacts on our business scenarios. please suggest me and help me. Now i am in realization phase i am not observed much more difference with this check box .
i hope i will get the answer very soonly, and thanks to all of the PM gurus

Hi,
<< Moderator message - Cut and paste response from http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YY-OLI0IMRCCUST removed. Plagiarism is not allowed in SCN >>
Regrds
Jitender
Edited by: Rob Burbank on Jun 6, 2011 10:53 AM

TS4071 I am trying to download Itunes but it is saying my system is not modified for it. I am running on a 32 bit system whatever that means. Please help!!!

I am trying to download itunes and it's not letting me it keeps telling me that my system is not modified for it. What do I do??? Help!!!

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
· Is the computer on a domain?
· Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

I want to make a payment for adobe cc but the payment system is unavailable

I want to make a payment for adobe cc but the payment system is unavailable

Hi daphnejvr
Your Adobe ID shows your country as Nigeria which is not a country that we currently sell to via adobe.com. This would explain why your order wasn't accepted.
Creative Cloud for Teams is available via resellers in your region.
Kind regards
Bev

System view for t528c has been modified from pm01.how to restore it into ol

System view for t528c has been modified from pm01.how to restore it into old manner.

Hi,
<li>There is a Maintenance view for t528c table. That is V_T528C. You can go to SM30 and give V_T528C and go in and delete the entries news created.
Let me know if you need any help.
Thanks
Venkat.O

My pc does not meet the minimum operating system requirements for the 6th gen nano. Is there anything I can do to make it work? This was sent to me from Apple after my previous Nano was recalled.

My pc does not meet the minimum operating system requirements for the 6th gen nano. Is there anything I can do to make it work on windows XP? This was sent to me from Apple after my previous Nano was recalled.

I think you've anwsered your own question. If it does'nt meet the minimum spec it won't work.

User Exit for TCode CJ20N to populate Project system user fields

Hi team,
need one support from your side..
I am looking for User Exit for TCode CJ20N to populate Project system user fields on SAVE.
I have found
Enhancement CNEX0001
Short text PS: User field
which is exactly suiting my req...as it has USER Fields (USR08/USR09 )in export paramters..
BUT it is not triggering on SAVE,,
Any hint or is any other user exit/badi which have USER Fields in export paramters.
Warm Regards
Krishan

Hi Krishnan,
If you want a custom tab that contains User defined fields at Project level then you have to use CNEX0006 user exit. Before this you must declare your fields using the CI include CI_PROJ in the PROJ table.
If you want a custom tab that contains User defined fields at WBS level then you have to use CNEX0007 user exit. Before this you must declare your fields using the CI include CI_PRPS in the PROJ table.
In the PBO function module exit of these exits you must use the following statements as the first statement.
MOVE-CORRESPONDING sap_proj_imp TO proj.
MOVE-CORRESPONDING sap_prps_imp TO prps.
In the PAI function module exit of these exits you must use the following statement as the last statement.
MOVE-CORRESPONDING proj TO cnci_proj_exp.
MOVE-CORRESPONDING prps TO cnci_prps_exp.
The remaining programming as in the case any Screen Exit.
Regards,
Abijith

I want to make a new computer my "home" computer for itunes. How do I make it the new "system administrator" for home sharing?

I want to make a new computer my home computer for my itunes library. How do I make it the new 'system administrator' for home sharing?

Yes, on the right side of the U.K. Apple Store homepage there will be an "Education Store." You can get something like 10% off, it seems.

How to make field editable in Tcode WPED

Hi,
Its about upgrade of IS Retail from ECC5.0 to ECC6.0.
For Inbound IDOCS coming from POS to SAP System, IDOCs which are in unprocessed category in WPER Tcode.
Now problem is in Tcode WPED there is a transaction date field which is now non editable in ECC6.0
I want to make it modifiable.
Earlier in ECC5.0 It was editable.
So how to make that field modifiable.
Regards,
Divya

Thanks Chenna
But that field is sometimes coming editable and sometimes not.....may be it depends on some condition.....but I want to make it editable always whenever an Inbound IDOC is in "To be processed" status in WPER tcode.
Iam going in that screen where field is coming uneditable is:
Tcode WPER -
> Inbound IDOC processing---> to be processed idocs---> double clicking on Idoc Number (comes on WPED screen with non-editable fields in overview table).
If I'm double clicking on that transaction date field it goes to the screen whcih shows Sales Audit Editor: Item list of aggregate sales.
Suggest me how to make it editable.
bye
Divya

Transport tequest not getting deactivated for tcode ksu1 & ksv1 in sandbox

Hi,
my requirement is to deactivate transport request for tcode ksu1 & ksv1 in sandbox. i applied SAP NOTE 326080 in sandbox. but still getting transport request for the tcode ksu1 & ksv1.
please tell me how to resolve this issue.
Thanks.
Rohitasya

Seems like the note you implemented activated the checkbox "Current Setting" in Transaction Code SOBJ for object such as CPC1 I would suggest you to go verify that (if the check box is active) if you look in the field 'Transport' above it, it says "Automatic Transport" and that check box means
Flag: Object belongs to current settings
Indicates that the current settings in the production system could entail changes
for the object involved.
Use
SAP determines the number of client-specific Customizing objects that belong
to the current settings.
Dependencies
The flag is only relevant in a production client ("productive" role in the client table).
Even if changes to client-specific objects are not allowed, the current setting can
be changed in a production client without being recorded automatically.
Since the very purpose of the note you implemented is to test KSU1 to able to run (for a non-modifiable system which is production type system) you have to make your sand box behave like production. So, my suggestion would be go to SCC4 and change the Client role to "Production" don't do any other changes, then ask your Costing consultant to test KSU1 and KSV1 transactions and as soon as he tests if it's working fine, revert the Client role to whatever it was.
You may look at the following post also
Distribution and Assessment Cycle
Edited by: Jeevan Sagar on Sep 13, 2011 6:44 AM

Screen exits/BADIs available for Tcode-QM02/QM03

Hi Everyone,
                   I have to modify a screen for Tcode-QM02( 'Checklist' tab) and add a drop down field to it.I have not worked on screen exits/BADIs prior to this please let me know how to proceed with this.
      Alsoplease tell me how can I manually go and check out whether a exit or BADI is available for this transaction?
Please reply as its a bit urgent.
Thanks and Regards
Abhishek

hi,
check these exits n badi's.
Transaction Code - QM02                     Change quality notification
Enhancement/ Business Add-in            Description
Enhancement
IWOC0004                                Change single-level list editing PM/QM/SM ALV settings
IWOC0003                                PM/SM authorization check of ref. object and planner group
IWOC0002                                PM/SM notification: Check whether status change is allowed
IWOC0001                                Create PM/SM notification: Determine reference object
IWO10027                                User exit: Generate user-defined settlement rule
IWO10026                                User check on setting status 'Do not perform'
Business Add-in
IQS0_STATUS_MAINTAIN                    Control of Changeability of User Status
IWO1_SUBSCREEN_0170                     Display Additional Data on Object Screen 0170 PhysicalSample
IWOC_LIST_TUNING                        Performance Tuning for Lists in PM/CS
IWOC_OBJECTINFO_CHNG                    Changes to Data of Object Info Screen
WOC_FL_DETERMINE                        Determine Date for Determining Installation Loc. Equi.
NOTIF_AUTHORITY_01                      Additional Authorization Checks for the Notification
goto system - status of ur transaction and find porogram name
then goto attributes of program n find package.
now goto smod or se18 click f4 click information system u will get all exits or badis available.

BW system open for config for RSA1 display

Hi
Our developers have been told by another company that there is a bug in BW3.5 (fixed in 7) whereby the system needs to be open for config in SCC4 to be able to view certain data.
This is in RSA1 - under InfoProvider they have a Holiday Entitlement - Quote Transactions item which when double clicked brings up a screen showing Update Rules information - Status, Data Fields, Type, Srce Fields. There is also a 'Create Start Routine' button, or, if one is already created, a 'Start Routine' display, and other information they require - more detailed information on the characteristics, Process Chain maintenance and InfoPackage maintenance.
With the system closed - they cannot see any of this. Update Rules and the 'Start Routine' buttons are not present.
We are not comfortable having the Live system open and have asked why they cannot do this in Development, as they insist they are not making any changes - they just need to display this information. They say it is required for debugging, and they have to debug in this system, as the debugging depends on the data - which is different in Prod than it is in Dev.
Does this stand up? Are there other ways they can access this information?
We tried Note 337950 - Queries (and other objects) cannot be edited - but this hasn't helped.
If there is a SAP note that does confirm this is a 'bug' and the system does indeed need to be open then please could someone point me in it's direction??
Many thanks
Ross

Sorry for not replying for so long... this one kinda went off the radar whilst there were some more important issues.
Thanks for the responses... Eric, our SCC4 settings were the same - i.e. system pretty much closed - and they couldn't see anything. Only by changing in SCC4 did they then get the warning message about changing obecjts - which you can bypass - and then you're in and can see everything.
We're on support package 17; BI_CONT is on 12.
The roles the users have been developed by their authorisations team... do you think it could be an auths issue? Surely it wouldn't make any difference though if you opened the system in SCC4?
EmJay - thanks, but this only pops up as per above when the system is open for config. Else you don't get the message at all.
Cheers
Ross

Is there any form of system cleanup for mac air

is there any form of system cleanup for mac air

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Performance Issue of Debugging in Live System

Hi All,
Does anybody know or has document whether or not debugging in live sytem causes much performance problem? I know debugging spends more system resource than normal running but our basis consultant traces it and forbids debugging in live system. Because he thinks debugging spends so much system resource.
Best Regards
FIRAT KAYIRAN
MM&BW Consultant

Hi,
Debugging in the production system should in normal circumstances be forbidden but not for performance reasons. The major threat of debugging is that potentially data can be changed and/or security checks can be bypassed if the authority to change values inside a debugging sessio is granted to the developer.
The performance overhead of debugging is normally not an issue: as you often interrupt the program flow by stopping at breakpoints, the total runtime becomes irrelevant. Debugging can make sense to investigate the performance of a single statement or a small block of code, but the ABAP runtime analysis (SE30) is a better tool for this.
Regards,
Mark

User exit for tcode co01 to validate serial numbers

Hi Gurus,
    Please help me to find a suitable USEREXIT for tcode co01 to validate serial numbers.
    My requirement is when i create a production order for equipments after i enter the quantity and dates, i need to give serial numbers for tht equipments...for tht in the main menu, under HEADER, SERIAL NUMBERS... here i need to validate serial numbers.
Thanks & Regards
Arun

Hi check with following exits assigned to CO01.
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines
Thanks
Sandeep

/h - debugging to make system modifiable for tcode OB40

Similar Messages

Maybe you are looking for