H key wont work on new T430

hi i recently got a T430 and the H key doesnt work when i press it with 2 other keys at one time all i hear is a beep 
also it was a gift so i cant return it please help .
Solved!
Go to Solution.

Hi Shani101,
I am sorry to hear that the issue still persists.
I strongly suggest you to visit nearby service center for further assistance, because this might be issue with hardware.
Please click here to visit the Lenovo support link and select your region to get the contact number.
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

  • Fn key wont work on ubuntu linux??

    i had recently install the linux ubuntu operating system on my laptop thoshiba  SATELLITE L735  but the Fn key wont work with it anyway to make it work ???

    The Fn key won't work until somebody writes the corresponding utility for Linux. Don't hold your breath.
    -Jerry

  • A key wont work on my keyboard

    The 1 and 2 keys wont work on my keyboard..Any ideas? Computer is about a  year old.

    Hi, under the flag icon at top right of the screen, open Keyboard Viewer, does that show the keys not pressed?

  • Volume and brightness keys not working with new keyboard on imac

    I just purchased a new wired keyboard for imac and brightness and volume control keys not working . i have tried adjusting keyboard settings. I have software version 10.5.8. Do I need to upgrade software. Thank you for any help.

    Do you have "Automatically Adjust Brightness" check box ticked in System Preferences > Displays > Display ? If so, you can't manually adjust brightness.

  • 'O' Key Wont Work Sometimes

    Yesterday my 'O' key randomly started to go weird; all of my other buttons work perfectly but when I press the 'O' button, sometimes it wont work. I have absolutely no idea what has caused this but any help would be amazing! The phone is 8 days old and uninsured so I need a fix as I can't send it back!
    Thanks in advance!

    Since it seems to be a hardware problem, so would request you to visit nearest Blackberry Authorised Service Station who can look into the matter and can suggest.
    Because your problem doesnt seems to be a software issue which can be resolved online.
    Hope that resolves your issue!

  • 6500 slide, whole right side of keys wont work?!

    this happend 2 months into owning the handset. along with other glitches that arent too much of a problem.
    the keys (top left one and 3,6,9,# wont work!!!) anybody know what i can do? thanks x

    hi...
    Your phone has a problem with the ribbons...so basically thats a hardware problem and needs to be checked by a nokia technician...
    Alternatively,if the phone is under warranty then you can return it to where you bought it from...(if its not water damage then they'll replace.)
    !!!OHOO!!!

  • 6500 slide, the whole right side of keys wont work...

    this happend 2 months into owning the handset. along with other glitches that arent too much of a problem.
    the keys (top left one and 3,6,9,# wont work!!!) anybody know what i can do? thanks x

    hi...
    Your phone has a problem with the ribbons...so basically thats a hardware problem and needs to be checked by a nokia technician...
    Alternatively,if the phone is under warranty then you can return it to where you bought it from...(if its not water damage then they'll replace.)
    !!!OHOO!!!

  • My Delete Key wont work

    I dont understand. It was working earlier today and then when I was replying to a message i wanted to delete something and now the Delete < Key dont work. Why is this? My phone is about a month old?
    I took out the battery for about 5 min and still nothing.
    Any help please?

    Are you having any issue with any other key not working?
    What happens when you press the delete key? What about if you choose Menu > Delete?
    Sometimes, a key not working or acting odd, is a result of moisture damage... even left in a bathroom during a hot steamy shower can affect the keyboard.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Satellite A300-1M1 - cursors keys wont work

    Hi everyone.
    I have one Satellite A300-1M1, and in this last weekend both "up" and "down" keys just stop working. At the same time which is very strange.
    What should i do ? is it dust ? Ive just cleaned the entire keyboard with a bottle of air spray, and problem remains.
    The warranty has just expired last November.
    Thanks in advance.
    Cheers

    I dont know what do you want to hear. If the keys are not working you must exchange the keyboard.
    What you can try is to test keys functionality in BIOS settings. If the keys dont work there too I presume it must be some mechanical problem.
    You can also try to remove key caps and clean them up.
    What else you can do?

  • CS5 illustrator 'shift arrow'/cmd shift arrow' keys wont work! (Help!)

    Hi,
    I have just installed the CS5 web suite and are loving it so far, however for some strange reason when I try to move an object or point by holding down the shift - arrrow or cmd shift arrow key, (as you do) nothing happens!
    Have tried restarting etc but to no avail... Works fine in Photoshop and other apps, but no go in ai... Any suggestions please as it's really annoying!
    (Never come across this before in previous versions..)
    Thanks,
    Dean

    It actually seem to have worked for you as well as you cannot copy and paste the settings folder from one version to another since the prefernces are tied to a different folder so if you moved or trashed the folder or replaced it in some way like changing the name of CS 4 to CS 5 then all you did is the same as above since Illustrator just created a new set of preferences and settings anyway.
    So the above actually worked for you once you quit and restarted Illustrator.
    Here look from my preferences folder CS 4 and CS 5 living confidentially side by side.
    BTW if you just removed the preference file within this folder you did not follow the instructions correctly you have to get rid of the whole settings folder.

  • Satellite Pro A10 - some keys not working with new keyboard

    Hi all
    I hope some1 can help with this
    i have a Satellite Pro A10. The prob i have is a.b.n.and enter keys are not working and its a new keyboard
    i fitted into my other A10 and all keys work so keyboard is fine.
    All works ok with usb keyboard. Had motherboard out all seems ok.
    Any help plz
    chris....
    Message was edited by: widgy

    Hi
    Why do you think that the motherboard is ok?
    Maybe its a keyboard controller issue
    Did you check if the cable was connected properly?
    In my opinion if you are 100% sure that the keyboard is ok then the issue must be related to the motherboard because there is no other part which is placed between the keyboard and mobo.
    Bye

  • My Windows 8.1 product Key wont work when trying to install Windows 10?

    I found my product key and checked it a couple times and if says it is wrong when I try to install windows 10 home version. I downloaded windows 10 iso and created a DVD of the new OS and it says my product key is no good?

    Cory I have an Acer Aspire XC600, I see by the support list that it should be good for windows 10.  This PC came with Windows 8 and has been upgraded to Windows 8.1 so... I can't seem to get anything to happen, no Windows 10 app, the Windows Authentication doesn't seem to work and there are no updates waiting to be installed... I can't find anything on the ACER site that will guide me through the Windows 10 update process, can you provide some help along with the steps I need to take to get this upgrade started? Thanks,  Al

  • Snyc key wont work

    Hello,
    I had a issue with my hard drive so what i did is use another hard drive to install windows vista onto it and they plugged my old hard drive in and i can see all my old data
    Issue is i want to get back all my bookmarks i had before i formatted. My iPhone 4 was synced with my previous install.
    I have my sycn key i used to originally to sync everything but when i use the key says incorrect number.
    How can i get all my old bookmarks back? It there a file that i can use on my old HDD or nor. I did not do a backup of my bookmarks :(
    I tried to re-sncy the data on my iPhone and now i cant ever access that it asks for my sync key, i put it in and it wont work

    There have been problems reported with Sync and they are working on it, so please try again later if you experience problems.
    *https://services.mozilla.com/status/
    *http://twitter.com/#!/mozservices
    See:
    *https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Recovery Disk wont work for new Hard drive.

    I have a HP Pavilion dv5-2132dx with windows 7 64-bit. Recently a message started popping up warning that the hard drive might fail and I need to back up my data. I decided to buy a new hard drive. The hard drive a bought is 320GB SATA 7200RPM by western digital. It is the same brand and model as the hard drive currently in the computer. I popped in the new hard drive and inserted the recovery disks I bought from HP. The computer goes through the whole process of istalling the disks. However, on the final setup it shows the welcome screen. Then u hear a beep and then the screen goes black with a message saying that windows could not install and to try installing it again. I have done this 3 times and its always the same thing. Is this a Hard drive issue or a software issue and how can i get this to work?

    Hi,
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    Assuming that this is just a problem with the Recovery process, there is a straight forward work around.
    Create a retail Windows 7 installation disc yourself using another PC - just download the correct Disc Image from the link below ( this must be the exact version your notebook came with ) and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Keypad wont work on new keyboard.

    I have Paralells 8 and Windows 7 and a new wired iMac keyboard. The number pad will not work in Paralells but it works in the Mac atmosphere. Unfortunately I need to work in the Windows platform for my job. I purchased this keyboard specifically to have the keypad. I have already turned off the mouse keys thing in Universal access but the keypad still doesn't work in Paralells / Windows.
    Any suggestions?

    Are you able to move around the screen without the touchscreen? If so then you can do the hard reset if you cannot then you should take it into Verizon or you can call us and we can repair it for you. If you are outside the 1 year warranty you may have to pay repair costs. If you are not then you do not need to worry about the repair costs.

Maybe you are looking for