H:Message doesn't show message

In my bean, I do some check and add message to FacesContext ,
than, navigate it to error page, just use <h:messages/> to show error messages. but it show nothing, Why?
here are my source:
in java source:
FacesContext ctx = FacesContext.getCurrentInstance();
ctx.addMessage(null, new FacesMessage("No such postcode"));

navigate it to error pageHow are you doing it? Sounds like that you're creating a new request instead of doing a redirect. This will reset the "old" messages. I am not sure but you might try to redirect using requestDispatcher.

Similar Messages

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

Follow the instructions under the heading "How to unlink a phone number" on this page.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions.

I can't open my iPod library in iTunes, the app doesn't show the device at all, no error message, nothing, but windows 8 opens it like it would a flash drive. It has worked for me before just fine and both have the most updated software versions. HELP PLEASE!

yeah i plugged in my iphone to my computer and itunes does not even notice that i plugged it in.

TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found" My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

I download an app. But doesn't show up on my homepage. I go to download it again from the cloud and all I get is a message saying "you already download this application so you will be able to redownload the app free of charge" I press ok.Still don't have

I download an app. But doesn't show up on my homepage. I go to download it again from the cloud and all I get is a message saying "you already download this application so you will be able to redownload the app free of charge" I press ok. Still don't have it

What is the app? What "homepage" do you mean?

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: Sy

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: System Library/Application Support/Adobe. Any ideas? I only have 16 days left on the trial and have been unable to get it to work on my Macbook Pro. This is all I am seeing after Lightroom opens. Thanks!

Thanks to both of you for attempting to help. I finally figured out what was wrong . . . it was a Permissions problem. Very frustrating, but after scouring the troubleshooting tips I finally found the one that solved my problem. I had to add a User and give it Read/Write privileges to Lightroom. The file I had to add the User to was Hidden on my Mac, so that added an even bigger challenge to the mystery. Only a few days left on my trial version! I hope I have time to try it out!

PC Suite doesn't show the messages in memory card

Hei,
Phone - 6210 Navigator
PC Suite - 7.1
Memory in use: Memory card
When I open the Communication Centre from PC Suite, it doesn't show the messages. In the left pane, number of messages in the folders is shown as zero. This happens if the memory is set to memory card.
On the other hand, if I set the memory to Phone memory, the messages are shown properly. Why is this happening and what's the solution?
When I tried to take a backup, all data, except messages, is backed up.
Few days back, I could access all the messages via PC Suite. It worked fine. But, now, there's some problem.
I've lots of messages in the memory card & I wanna move them to different folders. How else can I do it?
-Babloo

Hello,
I think I found the cause of the problem. There's some problem with the memory card.
I set the memory for Camera also to memory card and when I take a snap, something something happens. If I set the memory to phone memory, it works fine.
But, I can access the files/folders in the memory card both from the mobile & via PC Suite.
Now, my question is "How do I retrieve the messages from the memory card?"
Any help will be greatly appreciated.
-Babloo

Flagged Messages Mailbox Doesn't Show in iOS 6

A touted new feature in Mail.app for iOS 6 is the Flagged Messages mailbox, but it doesn't show for me although I'm using only a standard iCloud account. That is, the only e-mail account on my device is iCloud. The also-new VIP mailbox shows... Just not the Flagged Messages mailbox. I can't find a setting on the iOS devices, my Mac (running Mountain Lion) or on the iCloud website to enable the Flagged Messages mailbox.
What have I done wrong?

After talking to level two support to no avail....seems I have found a glich? Or maybe it's just the way it works.
1st you MUST have an email flagged.....second the flagged message must be in the general mailbox it arrived in, NOT moved to another folder within that mailbox. Works for me...Discovered this while on indefinite hold, lol.....

Adapter Engine monitoring doesn't show messages

I have 2 scenarios
1. Synch HTTP -> Synch RFC
2. Synch HTTP -> Synch BPM -> Synch RFC
In case 1 Adapter Engine monitoring shows all messages correctly
In case 2 there is no entry for HTTP Sender system only BPM->SAP System.
Could you help me why RWB doesn't show it?

denis,
just to add to what moorthy has told. IDOC and HTTP adapters interact directly with the INTEGRATION ENGINE on the ABAP STACK while, the other adapters interact with the ADAPTER ENGINE available on the J2EE STACK.
That is why, you do not gind the same on the RWB --> ADAPTER MONITORING.
Also, the reason why you do not have a SENDER HTTP and IDOC adapter.
Regards,
bhavesh

When I'm looking at my recent text messages on my phone, and I'm on the screen where I see a list of people I have texted. I click on a name to open up the conversation, however it is blank and doesn't show the conversation eventhough we've been tex

when I'm looking at my recent text messages on my phone, and I'm on the screen where I see a list of people I have texted. I click on a name to open up the conversation, however it is blank and doesn't show the conversation even though we've been texting back and forth the day before. So my question is how can I see the conversation?

Try the following procedure:
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Apple mail search doesn't show messages

I can normally search for sent and received emails by entering a persons email address in the search field with the spyglass icon, since last week I haven't been able to do this even though all messages show up in the inbox and sent folders. Is there a setting that I might have accidentally changed?

Step 1
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -F '$Time $Message' -k Sender mdworker -o -k Message Rne Norm -k Sender mds | tail | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.
Step 2
Enter the following command as in Step 1 and post the output:
mdutil -as 2>&- | pbcopy
You can then quit Terminal.
Step 3
Launch the Console application in the same way you launched Terminal. In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for crash reports related to Spotlight. If you don't see that heading, select
View ▹ Show Log List
from the menu bar. A Spotlight crash report has a name beginning in "mds" or "mdworker" and ending in ".crash". Select the most recent such report, if any, from the System and User subcategories and post the entire contents—the text, please, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post any other kind of diagnostic report, such as hang logs—they're very long and not helpful.

It seems that the last message sent in imessage doesn't show the date/time.

When I look at the imessage screen it doesn't show the date/time on last messages.

Claudia252 wrote:
Thank you. I cant figure out how to change the lable infront of the number to "iPhone" . It shows "home", "work", "pager", etc. but it doesn't show an "iPhone" option.
In the Contact, tap Edit.
Tap the label in front of the number and another Label screen apears.
Tap the label you want to use.

Support message doesn't show automatically the details about created person

Hi,
I'm facing an issue with Support message which has been created in Sattelite system and available at Solution manager system . The issue is , support message doesn't show automatically the details about created person under colum ' Contact Person ' . Please provide your great suggestions , thanks
Regards
Vivek

Hi Vivek,
Check if BP is created for that user and you have mapped to satellie system (identification tab)
e.g TRXN BP create business partner for that user and in identification tab maintain
ID type identification number
CRM001 <SID> <inst number> <CLNT> <User> (satellite system details)
Regards,
Shyam.

Is there anyone who can help me? my Photoshop CC is keep crashing, it doesn't show any error message. Suddenly " program stop responding" after few seconds of launch.

Is there anyone who can help me? my Photoshop CC is keep crashing, it doesn't show any error message. Suddenly " program stop responding" after few seconds of launch.

If Photoshop crashes the should be a System crash report generated by your OS. For example Windows

HT2589 What if I have an iPhone and its sends/recieves messages with our apple id which is my moms email? How do I fix that so that when I text my friends it doesn't show up with my moms email but my number?

What if I have an iPhone and its sends/recieves messages with our apple id which is my moms email? How do I fix that so that when I text my friends it doesn't show up with my moms email but my number?

Hi lfeddrix,
You can send and receive Messages from the Apple IDs and phone numbers signed in to your iMessage section in the settings of your phone. We have an article that explains a little bit about this, and it can be found here:
iOS: Using Messages
http://support.apple.com/kb/ht3529
This section is the most appropriate for your situation:
You can change the address that new iMessage conversations are started with in Settings > Messages > Send & Receive > Start new conversations from:. Note that this setting applies only to new conversations. If you would like to change the address from which messages are sent, first change this setting, and then delete the existing conversation and start a new one.
iMessage responses will be sent from the address the recipient most recently messaged. For example, a friend sends you a message to your Apple ID. Responses in this conversation will be sent from your Apple ID, even if you've selected new conversations to start from your phone number.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Mail doesn't show newest messages

I have a gmail IMAP account set up, but it doesn't show my newest messages. New ones that come in after I have set up the account show up at the top, but the newest ones before those are from march.

I have a gmail IMAP account set up, but it doesn't show my newest messages. New ones that come in after I have set up the account show up at the top, but the newest ones before those are from march.

H:Message doesn't show message

Similar Messages

Maybe you are looking for