H P Photosmart 4580 in windows 7 64 bit H P Solution Center Intallation Error

I have tried reinstalling my printer several times and everything intalls correctly except the H P Solution Center. When I try to open it I get an error message saying " HP Solution Center can not run because your device intallation isn't complete. Please plug in the USB Cable or rerun the setup program from the Installion CD for network installation"
I have done this several times and I keep getting the same message. Thanks for any help you can give me. I also get an error message when I try to scan from the printer to the computer. 

Hi,
I would ssuggest trying the following update and check for any difference:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-91714-2&cc=us&dlc=en&lc=en&...
If the same persists, ensure the USB is directly connected to a back USB port of your PC. is not longer than 2-3 meters long and not connected through any USB hub or extension.
If there is still no change I would suggest trying a different USB cable and check again.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • J4500 all in one; windows 8.1; missing Solutions Center

    HP JP4500 all in one printer; Windows 8.1; used Solutions Center on old computer; missing from new.  Can't fax or scan as easily without it.  Please help. I have a dial-up on my printer.

    Hi @86needhelp, thanks for reaching out to the HP Forums! 
    I can help you with install the Solution Center on you Windows 8.1. Please download and run the HP Printer Install Wizard for Windows
    The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
    Please let me know if this resolves the issue. If you require further assistance, please run the HP Print and Scan Doctor while you wait to hear back from me. Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
    Connectivity:
    USB: Verifies that the USB connection from your computer to the HP product is working correctly.
    Network: Verifies that the network connection between your computer and your network is working correctly.
    Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
    Driver Check: Checks for missing or corrupt driver files.
    Device Manager: Checks for problems in Device Manager that would prevent printing.
    Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
    Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
    Port Match: Checks the port settings for the HP product.
    Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
    Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
    Print Settings: Checks and adjusts the print quality settings.
    Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
    Scan Tests: Checks the scan mechanism, drivers, and registry entries.
    Source:Try the HP Print and Scan Doctor for Windows
    Click here to download and run the Print and Scan Doctor> >>>>> www.hp.com/go/tools
    If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
    If you see only green check marks (), the tool did not find any problems.
    If you see green wrenches (), the utility identified an issue and corrected it automatically.
    If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
    If you see a red X (), follow the on-screen instructions to resolve the issue.
    Thanks, I look forward to hearing back from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Windows 7 and HP Solution Center

    I just moved from Windows VISTA to Windows 7 RC.  Having issues with my HP photosmart 7280c and HP solution center.  I am unable to install HPSC.  Anyone else experience this issue?  HP support wasn't much help at all, which I don't expect them to be with Win7.  My main issue is scanning.  Even if I try to scan directly connected to the printer, i am getting an error.

    I am seeing the same problem with Windows 7 64-bit as well.

  • HP Photosmart Premium all-in-one C310a printer, Solution Center will not stay installed.

    It seems lately, past month or so, that the HP Solution Center keeps failing and needs to be reinstalled.  I get a message which says:" HP Solution Center cannot run because your device installation is not complete." followed by a list of steps to take to remedy the situation, which do not work.  I have to uninstall and reinstall the printer and then it will work, but after I shut the computer down for the day or run a virus scan (PC Matic) the problem returns.  Can anybody help me? 

    Hi @oboe1827,
    Welcome to the HP Forums! 
    I see that your HP Solution Center will not stay installed for your HP Photosmart Premium c310a printer. I am happy to help you resolve this issue!
    For further assistance, I will need some more information:
    If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
    If the printer is connected, Wireless, or USB.
    If the printer is able to make copies.
    If you are using Windows, please try the HP Print and Scan Doctor, and let me know what happens!
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Windows 8.1 and Solution Center

    HP Omni 27, C6380, Latest Solution Center from HP web site lists Windows 8.1 as working. While the PS_AIO_4_C6380_NET_FULL_WIN_WW_140_ 408 installs the printer, it will not install the Soultion Center software. 
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-122330-1&cc=us&dlc=en&lc=en...
    This will not install even in Compatibility Mode. So, assuming this is a problem unique to me and my machine, can anyone say why HP would list this as working with Windows 8.1, when it does not seem to?
    I have used the L4 uninstall and rebooted for every attempted install. I have uninstalled my printer each time, and let the software find it again, which it does. Is there any installation  technique which would get this SC to install?

    I booted into Win 8.1 Safe Mode. I was able to remove all printer software using L4 Uninstall from my original disk. However I could not install the printer software in S.M. 
    So I went into Win 8.1 normal mode, and it did install with relatively no problem. Had to connect the wireless printer to computer with a USB cable, but it was finally "found". Then it said all software was sucessfully installed. But there was no Solution Center. And this was my whole reason for doing this, to ger the S.C. back.
    Is there a way I can get the AIO software in a .iso file. Then I could make an installation disk myself. This would allow me to open the disk and navigate to the Solution Center Software and try just installing that. 
    Thanks,
    Dave

  • HP Pavilion dv5 running Windows 7 Pro 64 Bit. HP Solutions Center stopped working.

    Error message when I try to open HP Solutions Center is:
    "HP Solution Center cannot run because your device installation is not conmplete
    Please plug in the USBV cable or re-run the setukp program from the installation CD for a network installation.
    If this does not complete the installation, or you do not have the CD access the HP help files by clicking the Start menu."
    Printer is HP Officejet 4500 Wireless
    USB cable has been plugged in with no response.

    Never mind. Found my original CD and it is fixed.

  • HP Solutions Center stopped Working on Windows 8

    I have been using HP 3210 all in one printer for quite some time on Windows 8. All of the sudden earlier this week or last, I noticed the Solutions Center no longer worked. A message comes up saying the device software has not installed correctly. I have tried reinstalling the entier software, but get the same response. Any ideas of why it was working and now all of the sudden it does not. the printer still prints out fine, just can't use the solutions center.

    Hey @BOWZ,
    Welcome to the HP Support Forums!
    I would like to assist you today in resolving the error with HP Solutions Center 'Device Software has not installed correctly' with your HP Photosmart 3210 All-in-One. Being that you're running Windows 8 there is a good chance that if this was working for a period and suddenly stopped working a Windows Update most likely caused the conflict. Now I know you have already tried reinstalling your software and that failed to resolve anything. I'm going to offer a few more steps here to get your Solutions Center software up and running again.
    Step 1: Uninstall your HP Software:
    Open your start screen by either clicking on the Windows start button on the bottom left of your computer screen or by selecting your Windows button on the bottom left hand corner of your keyboard to the right of the Ctrl button
    Once your Start screen opens just type 'programs and features' and the Programs and Features option should automatically populate. Should it not show as an option then you may need to select 'Settings' on the right hand side and then choose 'Programs and Features'
    Once Programs and Features launches a list of all the programs installed on your computer will populate. Locate the HP Photosmart C3210 software and uninstall it. Note: you should see a file that says 'HP Photosmart 3210 basic driver' and one that shows 'Solutions Center,' ensure that they are removed from your computer.
    Once the HP Software is uninstalled then reboot your computer
    Step 2: Empty your Temp Files:
    When your computer comes back on, reopen your Start screen and type 'Run'
    Select the Run box and then type in the run box %temp% and select OK
    When the Temp folder opens select Ctrl + A at the same time on your keyboard to select everything in the Temp folder
    Next release Ctrl + A and select Delete on your keyboard
    Almost everything should delete out of this Temp folder. If any files are still being used on your computer you will have the pop up to 'skip' these.
    Note: Only Temporary files are being deleted. No files or folders for your actual computer will be removed by doing this.
       6. Once the files in the Temp folder have been deleted then close the folder
       7. Right click on your Recycling Bin on your Desktop and left click on 'Empty Recycling Bin'
    Step 3: Run an MSCONFIG Selective Startup:
    Reopen your Run box again and this time type msconfig and select OK
    When the System Configuration Utility opens select 'Selective Startup' and uncheck 'Load Startup Items'
    Click on the Services tab at the top and uncheck 'Hide all Microsoft Services' at the very bottom
    Select Disable All on the right hand side
    Select Apply and OK
    When prompted, restart your computer 1 more time
    Step 4: Reinstall your Software and Drivers:
    You're now ready to reinstall your HP Software and Drivers. Please select this link: HP Photosmart and Officejet Full Feature Software and Drivers for your drivers.
    Select Download and Run the HP installer when prompted
    Follow the on screen instructions to complete the install of your HP Photosmart 3210 All-in-One.
    Does Solutions Center work now?
    If yes, please re-enable your Startup Services again.
    How to Enable Startup Services:
    Open the Run box and type msconfig and select OK
    When System Configuration Utility opens select 'Normal Startup'
    Select Apply and OK
    Restart your computer again when prompted
    Please let me know if these steps resolve your issue. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • In need of a printer driver for an HP Photosmart 2710 on Windows 8.1 RT 32 bit.

    In need of a printer driver for an HP Photosmart 2710 on Windows 8.1 RT 32 bit.
    This question was solved.
    View Solution.

    Hi lt12345,
    I understand that you are looking to use the Photosmart 2710 with Windows 8.1 RT, but are unable to locate a driver. In my attempt to locate a driver I have come up empty handed. It appears that this printer is not supported for printing from Windows RT.
    Sorry to be the bearer of this bad news. Regards,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Fatal error installing software photosmart c7250 on windows vista 32 bit

    Issue with Uninstall and Install print driver software on my PC - printer is HP Photosmart all in one C7250 - wireless network hook-up
    My printer had been working for many years.  Then some of the photo print functionality had stopped working - I suspect because there may have been a conflict with multiple HP print drivers on my PC.  So I attempted to Unistall all HP software (via window uninstall).  All successfully uninstalled except:
    C:\program files/hp/digital imaging\esupport\hpzscr01.exe
    C:\program files/hp/digital imaging\ocr\hpzscr01.exe
    C:\pro...
    C:\pr...
    I was able to manually unistall the first 2 files since I could see where they were located.  But I have no idea about the other 2 becasue the error message did not provide full name as you can see.  I tried to install anyway (using HP Solution for Install Errors - Windows Vista).  Followed all instructions.  The install of latest driver/software (downloaded from the HP website) got as far as detecting my wireless printer; then it gets stuck at the config stage at 96% for 15+ minutes - then runtime error situation code 07417929.  HELP!  I think it's all becasue I can't unistall these phantom files.  does anyone have advice?
    ---------------- More INFO ---------------------
    After above, I am able to print in the basic way - but my HP Solution Center Software in not operational.  Message when I try to open Solution Center is "No HP Devices habe been detected." 
    I have a LOG file with some PRT Screens that I wish I could attach to this note (can't figure out how).  It may give more insight to the errors.
    This question was solved.
    View Solution.

    The security settings are for local security, if you are not in a corporate enviroment, there should be no reason to worry.
    Something we have not tried yet would be to
    1. Uninstall the current HP software.
    2. Turn off the printer and unplug it.
    3. Install the software, and at the point it asks whether it is a wireless or wired connection, choose wireless, and when the configuration window pops up immediately cancel it.
    4. It will go back to the page that asks you if it is a wired or wireless connection, choose cancel again and select OK.
    5. It will finish installation then ask about placing an icon on the desktop, choose yes and tell it to complete the software installation and place an icon on the desktop.
    6. Once that completes, plug in the printer, turn it on, and click on the icon to have it search for, configure, and install the printer.
    Let me know what happens.
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Problems installing photosmart b110a on Windows 7 64-bit - FATAL ERROR in driver installation!

    Hello,
    maybe that you can also help my with the installation of the driver software for my B110a on my Windows 7 64-bit Enterprise Edition Laptop. I downloaded the driver software from:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-82451-1&cc=de&dlc=de&lc=de&...
    I tried it several times, including the HP Installation Error - Windows 7.hta guidance. Actually I've already installed a lot of printers on PC's in my family - i've never experienced such a problem...
    I always ended up with a "fatal error" :
    1. fatal error:
    2. error information send to HP:
    3. details / error situation code:
    Any help is highly welcome and appreciated since I am quite desparate in the meantime - after trial & error for more that 3 hours... ;-(
    Many thanks in advance & best regards from Switzerland, Dominic
    Dominic Rihm
    [Personal Information Removed]
    This question was solved.
    View Solution.

    The fatal error you got with the B110a is caused by an .msi error. The document below should walk you through that.
    Fatal Error 'Error 1603. A fatal error occurred during installation' (MSI Error 1603) Displays Durin...
    The fatal error you got with the B109a might have a different fix. It would depend on the exact error code you received. The document below should help you find the error code and work through the fatal error.
    A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Solutions Center not working. Photosmart C306g. Windows 7 64 bit. "Parsing Error"

    HP Photosmart C306g
    Windows7 64 bit
    When I click on the HP Solutions Center on laptop to scan, I get the Error message "Parsing Error in file C:\ProgramFiles (86)\HP\DigitalImaging\bin\hpqscloc\1033.xml"
    Worked just fine in the past,not sure when it stopped working.
    Spent 4 days trying to uninstall & reinstall from internet. Just ordered the cd because I couldnt find mine.

    HI Bonnie-Boo,
    Here is a link to a post that Travis_C solved an issue for someone with the same error message you are getting. The steps are general so if you need any help or need anything let me know. Also you can find out more about parsing errors here.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Can't install Solution Center on Windows 7 64 bit to PSC 5140 printer shared from XP computer.

    I recenntly got a laptop with Windows 7 64 bit installed.  I have a HP Photosmart C5140 All-in-One printer installed on a Windows XP desktop as a shared printer.  I am able to print to the printer from my Windows 7 laptop without a problem.  I want to install the HP Solution Center app so I can scan, etc from my laptop.  When I try to install the Solution Center on the laptop, it starts the install process fine but then gets to the dialog where it wants to know how the printer is connected.  The only options it provides is direct connected (USB) or network connected.  I choose the network connected option.  It asks for the IP address of the printer which isn't available since it is installed on the XP machine using USB.  I have tried using the standard MIcrosoft fully qualified network name (can't remember the technical term right now) for the XP computer where the printer is installed (i.e. \\computer_name\printer_name) but it still won't allow me to continue with the Solution Center install.  Possibly this type of install is not possible?  I thought I did something similar a year or so ago with a Vista laptop I had.

    More than likely, you are receiving the access denied error because there may not be a HomeGroup in place.
    To handle networks securely with Windows 7, Microsoft took a different approach.  A HomeGroup essentially creates a trust among all the devices in that home group.  If a device is not in that homegroup, then that system will essentially be denied access.
    Click on Install a printer on a home network to get basic steps to install a printer in a network environment.
    Click on HomeGroup: recommended links to get more information about Home Groups, including setting one up.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • How do I use 2 sided printing on HP photosmart 5520 on windows 8

    how do I use 2 sided printing on HP photosmart 5520  on windows 8?

    Hi,
    Please selest the right "bit" to download Full Feature Software and Drivers from the following link and install on your Windows 8 computer:
       http://h20000.www2.hp.com/bizsupport/TechSupport/D​riverDownload.jsp?prodNameId=5157535&lang=en&cc=us​...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP Photosmart C410a drivers cannot be found by windows/HP solution center.

    Hi,
    HP Photosmart Premium Fax e-All-in-One Printer - C410a  
    Product Number: CQ521A
    I updated my computers to Windows 7 64 bit and now my c410a is basically useless to both computers that have it installed.  I want to start this with my girlfriend's old 32 bit Windows XP laptop has had zero issues through this entire time. So the printer is in perfect working condition. 
    From looking at the support website, I noticed that there was an update that was supposed to fix this exact problem. I installed it on both computers and it did not fix the issue. After I install the drivers, they stay on the computer and work perfectly until I shut down the computer. When I turn it back on and try to use the printer, the printer does not appear in the printer list and when I click on the solution center it says:
    "HP Solution Center cannot run because your device installation is not complete. Please plug in the USB cable or re-run the setup program from the installation CD for a network installation. If this does not complete the installation, or you do not have the CD, access the HP help files by clicking the Start menu."
    So I downloaded the new full software pack (including drivers) from the HP website. When I ran it, it said all the drivers were installed and there should've have been issues so it didn't do anything. 
    I tried using all the diagnostic tools recommended by HP and they say nothing is wrong and everything should be working fine. 
    Has anyone else had this problem and know how to fix it?
    I tried contact HP but my printer is out of warranty. They won't support an issue that they already recognized as their problem and put out a patch for free.
    Link to HP Patch  ((You might need to right click on the link))

    Hi,
    Believe me I would not have wasted anyone's time on the forum unless I have tried that solution. I have tried the full feature and just the driver downloads many times, both do the same thing. Actually, whenever I want to use the printer I have to completely uninstall then reinstall everything, including the patch that is supposed to fix this, and then it will work perfectly until I turn off the computer. Then when turned back on, if I want to use the printer, I need to reinstall everything again.
    Is there a better way to uninstall everything other than clicking on the uninstall button when opening the full feature driver?
    I apologize for posting in several places. This topic fits into several categories and I just want to get a solution. I have been trying to solve this for myself for a while and I'm getting sick of it not working. Especially when the support website has a fix for this exact problem, but it’s not working.

  • I am running Windows Vista 64 bit and i get a runtime error R6034.  How can i fix this and get itunes to work?

    I am running Windows Vista 64 bit and i get a runtime error R6034 when i was updating itunes. How can i update itunes with out getting this error?

    * Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"
    App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    * http://kb.mozillazine.org/Session_Restore

Maybe you are looking for