H/P Printer completed jobs Log

I have an HP E6500 wireless printer that appears to have two corrupted entries in it. Does anyone one know how to clear the completed jobs list without removing the software completely? HP as usual is of no help.

Oh Boy. I thought you got it with the address! I typed it in and it let me see active (albeit stuck) jobs list (2). But, it won't let me do anything with them, although it show an ability to remove them. Then I looked at the second part of your post (system prefs, etc), but that is what I've been trying to work with all this time. It shows me a completed jobs log. That's the rub. I'm trying to remove the files from the completed jobs file without uninstalling the software (AGAIN! thank you HP!), and reinstalling the software. There are three jobs listed there that I didn't attempt to print , and it appears that they are causing errors, delays etc. The errors, signigicant delays, and other problems began when they showed up (I think in a virul email). I can highlight everything but those three, but I cannot remove anything. I'm suspicious about those three specifically because I didn't put them there, and I cannot highlight them (or anything else). Is the bompleted jobs log stored in my hard drive, or on the printer? (and, if you know, where).
Thanks for taking time
Ron

Similar Messages

Printing setting job log - can't save settings.

Hi, this problem's been around some time with my printing settings.
I am attaching the my setting image as below.
User ID & User Code when printing Color from my computer is '100109'.
I want to permanently save this numbers.
However, every time I try it appears as '100108'; may be my previous setting.
How can I save it as '100109'?
Thanks in advance for the help.

Your image shows that you are using the Presets menu. If the Preset of Color has been saved with a particular User ID/User Code (ex 100108), then delete this Preset and create a new Color preset using the number you want (100109).
To do this, with the Color preset selected, click on the Presets drop menu and select Delete. Then, change to the Job Log menu, enter your 100109 User ID and Code, and then click on the Presets drop menu again and select Save As. Give it the name of Color and click OK.
Now when you print and select the Color Preset, the Job Log menu should show the 100109 User ID & Code.

How to send a job log/Spool once the job completed?

Could you please help me how to send a job log/Spool once the job completed.
There was an option is available System Send mail to send a mail once the job completed . So could you please help me how we can send a job log using this option .
I have tried the below but i didn't get any mail . Could some one help this please !
For example :
Job chain name : Test_spool
                Step1 : Reportstep
                                Job definition u2013 XXX_YYY
                Step2: Mailstep
                                Job definition: system_mail_send
Expression : Reportstep,job<(what i need to mention here )>:reportstep/log.txt
Check the ablove mentioned is correct and correct me , still i didnu2019t get the log in the mail please .
Thanks
Ramkumar

Hi Ram,
I need your help on getting mail alert with log file.
here is how i have provide the parameter valure for job definition: system_mail_sent.
Step1 with one job1 and step2 with one job1
In step2 , i have included the job definition to send mail. with below parameter.
Relative Job: Step 1, Job 1
Job File: step 1, job 1: step 1/log.txt
Please let me know if the above method is correct or not.
NOTE: mail server and from address are configured.
Thanks,
Karthik

How can I delete completed jobs in printer window?

I cannot delete any completed jobs in the printer window. There are now 265 completed jobs sitting there. How can I delete them? Delete button doesn't do it. Is there another way?

Hello John,
I don't have any direct suggestions for you, but I may be able to point you to an older thread where you might find a potential solution. Check this older thread out.
http://discussions.apple.com/thread.jspa?threadID=1511428
B-rock

Printer does not show completed jobs

I have an Epson Workforce 30 printer. After printing something, I check the printer icon in the dock to see if the job shows up as “completed.” Nothing appears. What can I do to remedy this situation?
Thanks.
Marta

With the printer queue selected, click on the word Jobs in the menubar and select Show Completed Jobs.
Pahu

Need to e-mail job log after job completes (SM37)

Greetings!
I need to export the results of the Job Log (run SM37, double-click a finished job and then click "Job Log" button at top - this is the list I need). Obviously, the program has already terminated so it won't be able to initiate it. Is there another way?
The need is to have this log be e-mailed automatically after it's ran or, at the very least, have a second "step" (job?) that reads the previous one and e-mails it's log.
We'd like to keep it automated and not have someone in operations have to remember to do this.

Hi,
Debugging can be done as follows:
1. Put a breakpoint at the beginning report CRM_MKTTGGRP_EXPORT_BATCH
2. Select your previously executed job in transaction SM37
3. Type 'jdbg' into the tcode field in the upper left area
To analyze the results and messages of the campaign execution, you can also have a look into the application log, either in the campaign application or in transation SLG1. There you should find details why the BPs have not been contacted.
Hope this helps,
Frank

OS X sends job to printer, but the printer never prints the job

All,
Hello. I have a Mac running OS X 10.4 Everytime I try to print a document, I can see in the Print Queue menu where it says sending job to printer, then it says completed. But no lights come on on the printer and no job ever prints. The printer is acting like it is not communicating with my MAC, but my MAC thinks it is connecting to the printer. First I tried on my local printer, then I tried on my network printer and the same thing happened.
I tried uninstalling and reinstalling my printer but that didnt work either. I am planning on checking the CUPS log as well but since the MAC says job completed and didnt give any errors I am thinking that CUPS will not have any errors either.
My next step is to repair disk permissions, then Reset the Printing System.
Anyone else have any ideas? Am I barking up the wrong tree so to speak? I am not sure of the software version but I am thinking its OS X 10.4. Im going up to check now

We're having JP's issue on a Mac here on our campus as well.
My user is running a 2.0Ghz iMac and printing to a laserjet 8150 via IP Printing. Up until this week everything has worked fine. Now when a document is printed from any program it goes into the queue and then gets moved to the "completed jobs" with no errors reported, but no acknowledgment by the printer and no errors produced.
Same model Macs print to this printer without issue. I tried redirecting to another lj8150 on the next floor of the building and got the same result.
Here's what I've done without success so far:
-Restarted the printer and Mac
-uninstalled/reinstalled the printer
-ensured all Mac and MS Office updates were installed
-reset Mac Print System
-uninstalled printer, reinstalled HP drivers for laserjets, reinstalled printer
At this point I'm ready to start looking system issues, viruses, etc. One thing I caught just before leaving the Mac was a download of limewire filesharing software [and virus hotbed]. So I'll add that to my list of investigations.
All other network functions seem to be operational except the printing.

How to display custom error message in Job log for batch processing

Hi All,
I am rexecuting one R/3 report in batch mode and i want to display all the custom error i have handled in job log when its executed from SM36,SM37. The custom error are like 'Delovery/Shipmet doe not exits' or others which we can display in online mode like message e100(ZFI) or any other way and accordingly we can handle the program control like come out of the program ro leave to transaction'Zxxx' or anything. But i want my program to be executed completely and accumulate all the error in job log of batch processing.
Can anyone tell me how can i do so...
Thanks,
Amrita

Hi,
Thats what i have done from the begining. I have written message like this:
Message i100(ZFI).
I was hoping to see this message in the log. But i cant see. Can you help me pleae...

Background Job Log - Interface error

Hi,
I am using a program in back ground which will transfer the data from one FTP server to another FTP server, the program is scheduled in back ground, the Job appears in green means sucessful but
in Job log I get the following log, (an if there are 10 file to be sent, 8 files moves but 2 files fails).
ftp> Interactive mode Off .#
ftp> prompt
ftp> open primary-proxy
Invalid command.#
Invalid command.#
ftp> sk74n2w9
Not connected.#
ftp> ascii
Not connected.#
Not connected.#
ftp> close
quit Transfer Complete
> ftp: connect :Connection refused
D:\usr\sap\PRD\D00\work>endlocal
Please give your valuable imputs.
Regards,
Prabhu

Hi all,
Please give some inputs on the above question. and any clarifications pls let me know.
Regards,
Prabhu
Edited by: prabhu jayaraman on Dec 9, 2008 7:06 AM

External Operation Job Log

Hello all,
I can't seem to find additional information on this. I have written an exteranl operation in c# and I can run it from the portal without any issue. I know that standard error is supposed to be captured in the job log, however I can't seem to figure out how to write to standard error from a c# console application. Console.error doesn't seem to cut it.
I am using ALUI 6.0 sp1, but I dont' think this has changed much over the years. Has anybody written a c# external operation and been able to write to the job log?
Thanks,
Berney

You could just make it write to stdout and then redirect stdout to stderr like this: "dir 1>&2". I put that in a bat file in the scripts directory and then made the bat an external operation. It wrote to the job logs like this:
Mar 3, 2009 11:40:55 AM- Starting to run operations (1 total) for job 'stdout dir test ext op Job'. Will stop on errors.
Mar 3, 2009 11:40:55 AM- *** Job Operation #1 of 1: ExternalOperation [Run as owner 'Administrator']
Mar 3, 2009 11:40:55 AM- Java Version: 1.5.0_12 from BEA Systems, Inc.
Mar 3, 2009 11:40:55 AM- OS x86 Windows 2003 5.2 as SYSTEM
Mar 3, 2009 11:40:55 AM- External Operation Agent for stdout dir test External Operation is starting...
Mar 3, 2009 11:40:55 AM- Original Script is: "test.bat"
Mar 3, 2009 11:40:55 AM- Scripts home is: E:\bea\alui\ptportal\10.3.0\scripts
Mar 3, 2009 11:40:55 AM- Appending E:\bea\alui\ptportal\10.3.0\scripts to test.bat.
Mar 3, 2009 11:40:55 AM- Full Path to script is: E:\bea\alui\ptportal\10.3.0\scripts\test.bat.
Mar 3, 2009 11:40:55 AM- Operation has timeout of 0 ms.
Mar 3, 2009 11:40:55 AM- stdout>
Mar 3, 2009 11:40:55 AM- stdout>E:\bea\alui\ptportal\10.3.0\scripts>dir 1>&2
Mar 3, 2009 11:40:55 AM- stderr> Volume in drive E is New Volume
Mar 3, 2009 11:40:55 AM- stderr> Volume Serial Number is 4CFC-EB07
Mar 3, 2009 11:40:55 AM- stderr>
Mar 3, 2009 11:40:55 AM- stderr> Directory of E:\bea\alui\ptportal\10.3.0\scripts
Mar 3, 2009 11:40:55 AM- stderr>
Mar 3, 2009 11:40:55 AM- stderr>03/03/2009 11:37 AM <DIR> .
Mar 3, 2009 11:40:55 AM- stderr>03/03/2009 11:37 AM <DIR> ..
Mar 3, 2009 11:40:55 AM- stderr>12/18/2008 07:59 AM 5,049 AnalyticsRunJobs.bat
Mar 3, 2009 11:40:55 AM- stderr>10/08/2008 01:35 PM 2,034 BulkSubscriber.bat
Mar 3, 2009 11:40:55 AM- stderr>10/08/2008 01:35 PM 3,577 SavedSearchMailer.bat
Mar 3, 2009 11:40:55 AM- Total Memory = 33554432 bytes, Free Memory = 9573312 bytes, Used Memory = 23981120 bytes.
Mar 3, 2009 11:40:55 AM- stderr>03/03/2009 11:37 AM 8 test.bat
Mar 3, 2009 11:40:55 AM- stderr> 4 File(s) 10,668 bytes
Mar 3, 2009 11:40:55 AM- stderr> 2 Dir(s) 17,469,964,288 bytes free
Mar 3, 2009 11:40:55 AM- *** Job Operation #1 completed: Process completed successfully; Command line: ""test.bat"".(282609)
Mar 3, 2009 11:40:55 AM- Done with job operations.
I don't think much has changed with this in the portal 6.x world, but it looks like stderr is definitely captured in wci 10.3. If there's a problem with an older version, start a support ticket to investigate a possible bug.

How to write log information into SM37 batch job log

Hi,
I have a report running in batch mode, and I would like to log the start time and end time for some part of the code (different Function modules). I need to write this log information into the batch job log. Therefore I can check the time frame of my FMs.
After search the SDN, I can only get some information on how to write log into the application log displayed in SLG1, but that's not I want. I want to write batch log information, and check it in SM37.
If you have some solution or code to share, please. Thanks a lot.
Best Regards,
Ben

Hi Nitin
Thanks for the reply. Could you explain it with some code ?
I tried to use the write statement , but it did not wrok. I could not see the result in SM37.
write : "start of the FM1 processing".
FM1 code
write : "end of the FM1 processing".
but those two statement did not show in SM37..
1) how to use a information message ?
2) how to use NEW PAGE PRINT ON and PRINT OFF command. ?
I would appreciate if you can write some code ,that I can use directly.
Thanks a lot.
Best Regards,
Ben

Which function module to delete job log?

Hi, I submit report via jobname and jobcount. After I close job and run it, we can see jobname is still in job log by SMX. But client doesn't want to see it, so who can kindly tell me which function module can delete jobname from job log?
Thanks a lot.
Jack

try CALL FUNCTION 'BP_JOB_DELETE'
If you have used JOB_OPEN before the SUBMIT to create the job, you can automatically delete the job upon successful completion by setting the parameter DELANFREP = 'X' in the JOB_OPEN function call.. this way the user will only see the logas for cancelled/aborted jobs..
~Suresh
Message was edited by: Suresh Datti

How to check HP LaserJet 500 color M551 job log

Hi Everyone
I have a new HP LaserJet 500 color M551 set for users, after user print a document to the printer, I want to know how many sheet it used. In the job log page I can only find who print it, output size, black or color... But I can't check how many sheet the print job used. Is there nay method to check it?

Thanks for the reply
I had try the method but it still can't get the info. what I want get is how many sheet(s) the print job used but it didn't show in the job log page. the print job only show following info:

Job log messages in BPM

Hi All,
I am doin Business Process Monitoring for monitoring batch jobs of a satellite system so that we will be getting tickets when some job is cancelling.
for cancellation of jobs SD tickets are generating.
now the requirement is to genarate a SD ticket for the successful job completion.
in BPm we have one option as "job log messages" in Background job monitoring type.
can we do it from there? How will the information be displayed in the ticket for job completion?
we are defining some threshold values also in that option. how those threshold values will help in generating SD ticket.
can anyone please suggest some idea.
thanks
Tripti

Hi,
You can monitor job log message with Business Process Monitoring in two ways (for an alert description see http://help.sap.com/saphelp_smehp1/helpdata/en/99/b45f54119044f19d389b2cad3430bc/frameset.htm)
a) Error messages:
Use case: You want to create alerts/notifications if background job creates more than N error messages in the job log.
-> Use the upper limit for yellow/red alerts.
-> Example: Job canceled ->monitor message of class 00 and with ID 564 (type A)
b) Success messages:
Use case: You want to create alerts/notifications if background job creates less than N success messages in the job log (Usually you want to watch the create of follow documents or the successful update of documents)
-> Use the lower limit for yellow/red alerts
-> Example: Job finished without error -> monitor message of class 00 and with ID 517 (type S).
In both cases you will get a green rating - but no notification - if conditions for yellow/red alert are not met. Notifications (manual and automatic creation) are allowed for yellow and red alerts only.
See also the documentation for Job Scheduling Management:
http://help.sap.com/saphelp_smehp1/helpdata/en/c5/7edcbd58ce4e29bc1baf1c4761d71f/frameset.htm
Best regards,
Martin

F110 Status - Printing data and log have been deleted

Hi All,
We have an issue with F110 transaction. In the status a message is being displayed as 'Printing data and log have been deleted'. As I am new to Finance, I could not get what that message mean. Can you please explain what could be the reason for this message.
Thank you,

Hi Guru's,
I have a similiar issue. Created a check run yesterday and went through all the steps...
- Parameters have been entered
- Payment proposal created
- Payment run has been carried out
- Posting orders 77, generated, 77 completed.
*- Printing Data and log have been deleted *
I can not remember what I click on and it cause this.
Please can someone help and tell me know how can I either re-run this check run I mean the physical checks or how can I go about this and delete this run and re-run from Scratch.
Best Regards,
Yassmen

H/P Printer completed jobs Log

Similar Messages

Maybe you are looking for