H215 Loses the analog video signal after a few minutes after start up.

After Windows 7 is loaded and about 30 minutes to an hour of normal screen and computer usage, the display goes black and my Viewsonic monitor says that the analog signal is missing and then goes into power save mode. Why is this happening? And the only way to resume the use of the computer is to force shut down the tower and then to power it back on. Which then runs through the failed start because I had to force shut down the system due to the display losing its signal. Please assist in this matter. I just bought the system a few days ago and for it to be doing this is quite dissatisfying. Thanks.
The system specs is:
CPU: AX2 250
RAM: 4GB
HDD: 1 TB
ODD: DVD-RW
OS: WIN 7 HP
D4RK51D3 G.F.X. LLC
Engineering the 1337 way.

Hello Oremus Productions,
First of all, sorry for this frustrating issue. The first thing to check with OS X Mavericks or Yosemite is the permissions of your Adobe folders. Here is blog post to check out: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
The other thing I'm curious about is ProRes and if Premiere is handling it properly. Tell me, do you have Final Cut Pro 7, Final Cut Pro X, iMovie, or any of the Apple video products installed? Do you have any components in your Mac HD > Library > QuickTime?
Thanks,
Kevin

Similar Messages

Analog video signal

Hi everyone,
is there a chance to get an analog signal over the HDMI output so i can convert over DVI to VGA?
Thanks!

Help please?
It's me again!
So far I've got the analog video stream captured only when using DVD Creator 2. But, I still have two more problems to solve. 1) When I stop recording onto DVD creator, always error message:"WinDVD Creator has encountered a problem and needs to close. We are sorry for the inconvenience." is displayed, and restarting the program it cannot open the recorded clip saying "either the file is corrupt or a non-compatible file format" while Windows Media player can play it back. I cannot edit the recorded video clip as a result. 2) The second problem is that the video stream from S-Video of analog camcorder is played back OK, but once click the record on DVD creator, the video capturing starts to lag and looses smooth flow.
Any hint or comment is appreciated.
Thanks,
Moe

Set the Moov in the begining in the mp4 video in after effect or using adobe encode ?

is there a way to set the Moov in the begining in the mp4 video in after effect rendering or using adobe encode, so it can fast start in web or mobile application ?

running After Effects in English, even if you’ve installed and activated it in another language

Qosmio G10: analog video signal capturing from Camcorder

Please help
I am from Canada and new to this forum. I bought a Qosmio G10 early this year but only had a chance to try to use it to capture and convert my V8 home video tapes recently with no success.
I have tried the Toshiba Tech support with no hope. I have tried the registery patch for VinDVD creator 2, but still it is not seeing my video input stream from the camcorder. I tried both S-Video and Composite inputs with no result. Anybody with similar experience?
I appreciate your help.
Moe

Help please?
It's me again!
So far I've got the analog video stream captured only when using DVD Creator 2. But, I still have two more problems to solve. 1) When I stop recording onto DVD creator, always error message:"WinDVD Creator has encountered a problem and needs to close. We are sorry for the inconvenience." is displayed, and restarting the program it cannot open the recorded clip saying "either the file is corrupt or a non-compatible file format" while Windows Media player can play it back. I cannot edit the recorded video clip as a result. 2) The second problem is that the video stream from S-Video of analog camcorder is played back OK, but once click the record on DVD creator, the video capturing starts to lag and looses smooth flow.
Any hint or comment is appreciated.
Thanks,
Moe

When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes. After a few minutes, it starts to play again. I hear a click and the apple logo shows on the screen. Any ideas??

When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes. After a few minutes, it starts to play again. I hear a click and the apple logo shows on the screen. Any ideas??

You may need to do a Restore in iTunes.
Clicking sounds from an iPod that has a hard drive is probably not a good thing. It is possible that your iPod's hard drive is becoming unreliable.

None of the quicktime videos from websites play anymore. This started yesterday. Before that I could play them all. Now none of them work. Has anyone had this problem? How did you fix it? Thanks in advance for the help!

None of the quicktime videos from websites play anymore. This started yesterday. Before that I could play them all. Now none of them work. Has anyone had this problem? How did you fix it? Thanks in advance for the help!

Did you try
1, resetting the device
2, deleting all cookies / history items of Safari?

OS 3.1.2 Update didn't fix the "updating library, please wait a few minutes

I was hoping that the software update would fix the "Updating library, please wait a few minutes" screen that comes up when I try to play a song on my ipod touch after syncing. Is this bizarre "updating library" delay going to be a permanent feature of the ipod touch now? Could someone from Apple please clarify if you are trying to fix this, or is this just the way it is now?
If you (Apple) aren't going fix it, I hope you make it known in your marketing for the ipod touch that you can't listen to your songs immediately. If you don't disclose this, I sure hope the Zune touch people make a big deal out of it when promoting their mp3 player. I woudn't have bought an ipod touch if I had known I had to wait 2-10 minutes to listen to a song.

I suspect there's something else going on here... I'm having terrible trouble syncing films, and even tho they are clearly there, they don't seem to load in the list... I noticed that especially if I had dropped my network connection - the list would disappear (and this is on multiple touches)... It then starts to look very like my issues on Apple TV, where if it cannot verify the film back throught the network to the store, it deletes the content from your box... I suspect that each time it loads on the touch, it's doing some kind of 'legitimacy' verify, and that's what's causing the problem.... If I crash the sync just before the end, the re-index seems to work okay, but there is still that slight delay....

I have an iMac, and have a Verizon DSL account. Recently, my Mac Mail keeps requesting the passwords on my account every few minutes, and will not allow me to send messages using Mac Mail. I cannot edit the outgoing server; how can I send emails?

I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.

Is there an email saved in your drafts or outbox folder? I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
You can open the message and then delete it from your Outbox folder. Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks. I suspect that will work.
With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages. If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad.

I was typing a n e-mail to my friend. I put the iPad down to answer the door and came back a few minutes later. The screen had gone blank and when i tried to get the message that i was typing back I could not find it. It was a lot of typing and pictures.

I was typing an email to friend. I put the ipad down to answer the door and came back a few minutes later and the screen had gone blank and when I tried to get the message that I was typing back I could not find it. The message contained a lot of text and pictures. How can I find it? I have looked in drafts.

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Do I lose High resolution video signal when I capture through FireWire?

I have being reading that capturing through Aja Kona video card is an uncompressed video capture. does it mean, I lose some part of my HD resolution video signal when I capture it through fire wire? Could somebody explain me? Thanks.

No, capturing DV or HDV via firewire is a bit for bit transfer of the original recording ... zero loss.

890FXA GD65 no video signal after OC Genie install

Hello,
I wanted to see what OC Genie is about so I installed it, but then after the reboot I couldn't get video signal to my video card. The PC is powering up and all the fans and LED are working inside, but there is no video signal to the monitor.
Did I just brick my motherboard, and is there anything I can do to fix it?
My CPU is PhenomII 1090T, 970 GTX GPU

Thanks Obellix.
I removed the battery before writing this post, but it seems that I didn't wait enough. Now I did it second time, waited 10 minutes before plugging back the battery and it is working.
GG, thx again.

No video signal after Grub

Hi everyone,
my graphics card is ATI HD7850 and I am using the open source radeon driver.
I ran this setup for about a year without any flaws until I installed an SSD into my system. I copied the root (/) from my HDD to the SSD following this guide: https://wiki.archlinux.org/index.php/Fu … with_rsync
After I edited the files in /etc/fstab and /boot/grub/grub.cfg, and configured another boot order in my BIOS, I started Arch and everything ran fine. I then installed Windows to the SSD on another partition which also runs fine.
But when I tried to run Arch again I did not get a video signal right after Grub (monitor said no signal found). After hitting reset it worked again.
Now I need to try to boot Arch about 5 times until it works. Even a USB stick with a fresh Arch ISO from the download section fails to boot in about 4 of 5 attempts.
Windows starts without any errors and I can play video games just fine, so I don't think my graphics card is broken.
Does anybody have an idea what might be wrong? I am totally lost here.
Things I tried to do:
- Rebuild boot image with mkinitcpio
- Tried to start without dynamic power management for my graphics card
Last edited by foobar42 (2014-10-21 12:36:52)

Quote from: Bas on 29-March-08, 19:15:31
Put the old card back in, does it work again?
Anyway, put the old card back in first, see if everything still functions.
Quote from: Fredrik Åsenius on 29-March-08, 22:21:29
Yes, and I was also thinking about the two tuner cards. Do what Bas says first, and only then without them and their drivers.
Correction, three cards!
The mobo setup on the cardboard was with NO PCI slots: just the video card. Thanks for the tips.
Quote
If you, test with a PSU that cann do like 30A @ 12V single line, see what it does.
Your old Enermax will probably not enough, and your new Silverstone 400W could also have problems.
Not sure what this means, or how to carry out test. Thanks.

No video signal after crash

recently my dual 1.8 G5 power mac froze and the fans went full blast like a jet engine. i had to hold the power button in to force it to shut down, when i restarted it, it powers up like usual but i no longer have any signal to my monitor. i've pulled out and re-inserted the video card, reset the smu button, replaced the video card and still have no signal. i know the computer still works cause i can connect to it on my network and transfer files to and from it, i just can't figure out why i'm no longer getting a video signal from it. can anyone please help?

misterfumanchu wrote:
thanks for the response. it had the nvidia geforce fx5200 originally, so i bought the same card to replace it, but it didn't make any difference when i put in the replacement, still no signal. if i tried to boot up into open firmware, i wouldn't know if i got the terminal or not since i probably won't see anything. i was also wondering if it could be just the dvi cable going bad? is that even possible for the cable to go bad cause the computer froze?
The cable wouldn't be likely to go bad because the computer froze, but the a computer freeze because of a cable failure could be very believable.
Booting into open firmware would be telling in one respect: if you get the screen to come up, then it isn't the video card; it's something more fundamental but probably fixable. Try the following booting into open firmware, even if you don't get any video action:
Type in the following two commands, probably a minute after you get the initial boot tone:
*reset-nvram <cr>*
*reset-all <cr>*
You should get a reboot after entering the second command. This is kind of like an instrument landing in pea soup fog, but it might help. Even if you get the screen to come up, go ahead and enter the commands.
At least the good thing about the 5200 is it is such a minimal card that replacements are very cheap in the wild.

How can I get my 2010 mac book pro to send signal out through the mini display port? end signal out through the end video signal out through the

How can I get my 2010 macbook pro to send signal out through the mini display port?

First, what you said is contradictory. You say "can't get a video signal", then say"the Mac wallpaper is broadcast, the mouse pointer is visible". "No video signal" means an absolutely black,blank screen. It sounds like you have plenty of signal.
I am supposing what you are seeing is actually a blank desktop, which is to be expected if your settings are such that you are extending the desktop, instead of mirroring it.
Within the preference panes is a setting that allows you to change this. Open System Preferences, click Displays, and then click Arrangement. You will see that you are extending the desktop. Change that setting.

HP w2207 Monitor - "No Video Signal" After Power Outage

My mother has a Mac Mini - 2009 model - that I bought her. It is connected to an HP w2207 monitor I used to have with a mini-display port to DVI [I think, either that or VGA] adaptor. She lives 2 1/2 hours away.
Last week there was a power outage and ever since she cannot get her system to work. Her monitor says "No Video Signal" and then goes to sleep.
I worked with her for over an hour on the phone trying to fix this problem (oh what fun). Tried every combination of things I know to fix it. It seems from her description that the Mac Mini is not actually booting. When I have her turn the computer off by (press the power button, wait, press it again), she reports that she will here the disk drive spin up for 10 seconds but then no more activity. The green light is on, but that is it.
I had her reset the SCM, but that didn't work.
Any help would be greatly appreciated.
Bryan

See if the Mini will boot from the install disk. If it does, have your mom use Disk Utility to repair her internal hard drive. Repeat running repair until Disk Utility gives the disk a clean bill of health. Then repair permissions.
Disk Warrior can sometimes repair things Disk Utility can't. However, it's possible the internal directory is beyond help. In that case, erasing the internal disk and reinstalling the system will be necessary. It's also possible that the disk itself or electronic components in the Mini have been damaged which would require repair at the Mac hospital.
You might want to consider buying your mom a UPC.

H215 Loses the analog video signal after a few minutes after start up.

Similar Messages

Maybe you are looking for