H264 and mp3 support in VLC needed ? streaming.ffmpeg
I have found that I need to VLC (video-lan-client) with mp3 support so I used the cvs version of ffmpeg in the AUR packages but this doesn't seem to support H264 video.
How do I add H264 support to the PKGBUILD so I can have both. ?
Any help greatly appreciated I can stream H264 with current version of ffmpeg but no audio
Then with the ffmpeg-cvs no audio or video.
This is the same if I am streaming or playing locally.
Cliff
You'll need to install GPAC in order to build ffmpeg with H264 support. I don't believe it compiles properly without it. I couldn't find gpac in any of the repositories or AUR so your best best would be to write a pkgbuild yourself or make a request for someone in the AUR request forum to do it for you.
Similar Messages
-
Sdl_mixer and mp3 support
Just wondering: I've been messing around with jdoom, which uses sdl_mixer for music playback, and I found that the extra/sdl_mixer hasn't been compiled with mp3 support. I've rebuilt the package to suit my needs. Is this an oversight or is there a method to this madness?
You'll need to install GPAC in order to build ffmpeg with H264 support. I don't believe it compiles properly without it. I couldn't find gpac in any of the repositories or AUR so your best best would be to write a pkgbuild yourself or make a request for someone in the AUR request forum to do it for you.
-
Hyper-V 3 Virtual SAN and Linux support
Hello!!
Please, I'd like to know about Hyper-V 3 Virtual SAN and Linux support. I need to bind some LUNs to a hosted SuSE (or even other distro, I can migrate if needed).
Thanks a lot.
narfUnfortunatelly I have to work with my actual SAN.
Do you know which one is faster: access my disk via Virtual HBA or mapped via SCSI on Hyper-V?
narf
map it via scsi which will keep it away from the system volume and safer
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play! -
Nomad muvu cannot format and mp3 wont turn
i try to format my nomad 28mb mp3, but it wont, and there is an error. I cant add songs and turn it on. Maybe something inside of the mp3 is broken. Its and mp3 where you dont need cables, just directly to the computer.
eddy2000,
What error did you encounter? Also, have you try using the firmware update that's available at the download site to format the player. Be sure to read the instruction under 'Shows Details' to properly run the firmware update application.
Jason -
Transconding - Mixing in live streaming Microphone and MP3
Hello,
We intend to develop a Flex client application the user to send audio from your microphone and mp3 at the same time to a server that Flash Media Server.
It would be a mix of microphone and music in mp3 that is playing in the application at the same time transmitted to the listeners.
What will be the version of Flash Media Server that enables this mixing of audio from microphone and music played on the client in flex? Which version of Flash Media Server that can best meet my needs?As of now you won't be able to publish any local content say like mp3 from Flash Client to FMS. You would have to have mp3 file stored on server and then write some kind of logic where your audio content from microphone and mp3 playback is synced. There is no direct way that you can mix two contents and playback it as one stream. And you will need Flash Media Interactive Editon if you plan to write any server-side logic for sync.
-
Mixing in live streaming Microphone and MP3
Hello,
We intend to develop a Flex client application the user to send audio from your microphone and mp3 at the same time to a server that Flash Media Server.
It would be a mix of microphone and music in mp3 that is playing in the application at the same time transmitted to the listeners.
What will be the version of Flash Media Server that enables this mixing of audio from microphone and music played on the client in flex? Which version of Flash Media Server that can best meet my needs?As of now you won't be able to publish any local content say like mp3 from Flash Client to FMS. You would have to have mp3 file stored on server and then write some kind of logic where your audio content from microphone and mp3 playback is synced. There is no direct way that you can mix two contents and playback it as one stream. And you will need Flash Media Interactive Editon if you plan to write any server-side logic for sync.
-
WaveStudio 7.12 (and/or Audio Pack for MP3 Support) product Help files
WaveStudio 7.2 product Help files (CTWAVE32.CHM) need to be revised to incorporate MP3 support, for those customers (like me) who have purchased the Audio Pack app for MP3 Support.
-OR-
Am I supposed to?just use the old WaveStudio 5.00.2 Help files (CTWave32.hlp)?
Also, there doesn't seem to be any way of uninstalling WaveStudio 5.00.2, unless I uninstall the whole suite of Creative MediaSource software... And that doesn't seem like very much fun at all... ? So, what, should I just leave WaveStudio 5.00.2 on the machine?JRe: WaveStudio 7.2 (and/or Audio Pack for MP3 Support) product Help files?For anyone else experiencing this issue, the answer is:? Can't do it!? WaveStudio 5.00.20 can not be removed as a "stand-alone" application. The reason is, it's not listed as a separate program in Control Panel's Add or Remove Programs, and WaveStudio 5.00.20 has no Uninstall option.
Furthermore, WaveStudio 7.2 doesn't seem to overwrite the earlier version (it's still there and for some odd reason, it still works).
In order to remove the old version of WaveStudio, you must remove whichever Creative application that version of WaveStudio came bundled with.? Then, when you reinstall that application, WaveStudio 3.0 (or whatever iteration that application contained)?comes right back.
Therefore, the answer seems to be, you have to?li've with two versions of WaveStudio on the 'puter:? 7.2?and whatever earliest version the original bundled software?came with on the Soundblaster disc. Sad, but apparently true!? So, good day!? :smileytongue: -
Programs to stream movie and mp3
Hi
I need a programs on linux arch so can stream movie and mp3 formats over my network to my ps3.
somone now how i can do that ? some script or some hacks ?nono ...
i have Arch on my computer now and i want to have audios file in :
/home/user/Audio
i mean that i can lissing on audio frome computer on my PS3.
like share tha map but only stream thing over on my network. -
Mp3 and j2me supporting reliance mobile
hi,
if anyone know abt mp3 and j2me supporting Reliance phone in market.if so please give me the link where to get teh details I already checking it with reliance website and i want more information please help me.
thanx in advance
laxmihi laxmi
i dont know did you check this URL
www.dadp.com
there is one forum also avail for the j2me and realience phone you will get all the information tehre
regards
[email protected] -
hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?
If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll. -
I am trying to update my iTunes so I can sync my new iphone 5s and it doesn't recognize the phone, apple support said I need to update my iTunes when I try and do that I get an error message that says " the ITunes update server could not be contacted. Please check your internet connection or try back later.
My internet works fine and I have tried back dozens of times with same result.Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
I Purchase iPad mini retina screen on July 7 2014 at Malaysia local apple sale agent switch store somehow now my iPad did restore to latest iOS 7.1.2, before that and after also facing 1new issue is my iPad mini cant success download apps and error message show can't download at this time, either retry or click done. My internet is good condition no line down, I reboot my iPad only can download but sometime can't need to reboot twice only can download. Very sad local sale and tech support can't help to solve my problem...
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
No data is lost due to a reset.
If nothing above helped, try here > iOS: Troubleshooting Wi-Fi networks and connections -
I have a problem with my mac, lit with blank screen loading bar and then goes out, I need assistencia on line or contact the Technical Support Service in Argentina
Priscilla,
if your Mac is still in warranty, then you should contact the Argentinian technical support service. If it is out of warranty, then we can try to lend a hand. (We’re just fellow Apple product users here.) -
My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?
Wirelessly
Just select the option to make your AirPort Express join an existing network in the setup process -
No Language and Input Support option in my OS 6 Applications list - need to add second language
I have a Curve 9300 bought a few weeks ago in the Caribbean (Digicel carrier). I'm now in Germany and was able to switch between english and german languages for the past few weeks; however this evening I synced the device with my Macbook for the first time, which prompted an upgrade in software.
Now I have OS version 6, but my language selection is only English and portuguese. When I select Applications on the desktop software, it does not give me the Language and Input Support option to re-add german.
I tried uninstalling and reinstalling from the offiste RIM link,(where people can choose their international carriers), but the download is an unreadable Text Edit format. I've tried un- and re-installing on my mac, but that doesn't do anything, and i don't know how to uninstall from the device itself (plus am scared i'll lose all my info).
Can anyone help? I've exhausted every option and I need to write in both languages for work...
Thanks in advance!sariadina23 wrote :
I wanna add korean..
Downloading OS pack? I haven't.. How could i? The link please..
And,fyi.. I downloaded the bb desktop software from official blackberry website malaysia..
And it's successfully installed,no prob at all..
Hi sariadina23
Please remember as this section of forums is for Mac so the below mentioned steps can only be performed on a PC only not Mac. If you want to install Korean language support on your device you can try this :
1.Download and Install on your PC an OS pack having All Language from here Indosat or Device Software Download Sites for BlackBerry
( Make sure you are downloading for the same device model )
2.. Download and install the latest BlackBerry desktop software for Windows from here BlackBerry desktop software
3.Search your C: drive for Vendor.xml and delete them, there may be one or two vendor.xml ( On your Pc change your folders option to show hidden files/folders ) :
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\Windows UserName\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Once completed Open BlackBerry Desktop Software for Windows > Select Applications. > In the Language and Input Support section, select the language to be added to the BlackBerry smartphone (a + will appear next to the language to install) > Click Apply.
KB13067 : How to obtain language packs for BlackBerry smartphone.
KB05305 : Localization support for BlackBerry Smartphones.
So try it and let us know.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Maybe you are looking for
-
Error message when copying from Acrobat Reader
Error message when copying from Acrobat Reader - any file, any time (Win 7, Adobe many versions until recent). Copy works, but causes a needless and useless error message that has to be clicked away every time. This problem is published on the web f
-
When I try to drag n drop it 'processes' them but dosnt add them, they are mp3 audio files so there's now reason why it shouldn't... Using latest version of iTunes. I have opened the files with other programmes and the files play without a problem! W
-
Hi Experts, Can you please help me to create a report with the following entries : PO Number Vendor Number PO Qty PO Value Received Qty Value (Recd) Kindly advice me. Thanks in advance, Regards, Rounak
-
How to set up 2 ichat accounts in a home office??
Hi guys anybody know how to have 2 ICHAT accounts? do you have to have 2 DOTMAC accounts? i hope not. thanks in advance, JOHN mac book Mac OS X (10.4.6)
-
Can not down load up date for flash player..I tried removing my original flash player and this did not work...and now i have no flask player! A firefox window opens for down load and only reads "save" or "cancel" it does not have a "RUN" button. When