H264 asynchron after rendering

dear community,
I have recently bought Adobe Premiere Elements 11 to cut recorded TV program. It was recored from DVB-C via Terrratec H5 Stick using Terratec Home Cinema.
First i tried cutting t with 2 different free programs, Smart Cutter and Avidemux. Smart Cutter always crashed during the process. Using Avidemux I always got asynchron video and sound (beginning was synchron, got more and more asynchron until I had a shift of 2 seconds at the end of the film!).
Now with Adobe Premiere Elements 11 for Windows I have the same problem after cutting off the beginning and the end (with the same video file I have an approximately shift of 45 seconds, sound is 45 seconds slower). I tried out different players (VLC, Windows Media Player, Windows Media Center), all having the same problem. Before rendering Premiere Elements plays it perfectly synchron.
input file:
Typ: MPEG-film (TS-File, H.264)
Size: 7,2 GB
Resolution: 1280x720
Framerate 50,00
Audio: 48000 Hz - compressed - stereo
Length: 1:57:35:15
Average datarate: 1,0MB/second
Pixel-ratio: 1,0
export settings:
Typ: MPEG2
Resolution: 1280x720
Framerate 50 fps
TV-Standard: NTSC
Audio: Dolby Digital, 448 Kbit/s, 48 Hz
After investing into Adobe software and rendering for 45 minutes (with Intel i7 2600k) I would have expected to get a perfectly synchron result.
I would be very pleased if you could help me find a solution.

The commercial likely only contained a 2-channel (Stereo) Audio Stream, where the program content contained DD 5.1 SS in DD AC3. It sounds like you were (before you ran it through XMedia Recode) only getting the LS (Left Surround) and RS (Right Surrond), or rear channels only. Most dialog is fed to the Center channel, with some to LF (Left Front) and RF (Right Front).
Though not in video editing, I have encountered such with a home theater system, which fed Audio to a separate amp and speakers in another room - only the LS and RS channels were being fed from the receiver. To correct that, I had to replace that receiver with one that had a full second stage. In my case, the Center channel was completely missing, with little, if any LF & RF - only LS & RS.
Glad that you found a solution, and posted that.
Good luck,
Hunt

Similar Messages

AVC H264 720p60 video with AC-3 asynchronous after exporting as AVCHD using Pre11

Dear community,
I am currently facing a problem concerning asynchronous video and sound after rendering AVC files including H264 codec at 720p60 and AC3 sound as well as multiple stereo tracks.
The video is recorded using Hauppauge Hauppauge HVR-5500HD to record DVB-C.
After editing (only cutting, no effects) and exporting as AVCHD 720p60, vbr 2pass, I get gradually increasing asynchronity. Some exports are at the beginning perfecty synchronous and get more and more asynchronous (until reaching a peak of approximately 5 minutes delay of video at a 2 hours export), others have the delay at the beginning and are perfecly synchronous at the end.
However, that issue doesn't occur with all souce files, only with some random ones! (Unfortunately the most!)
Here is the output of the souce video using MediaInfo (1 example out of many similar ones):
General
ID :
1 (0x1)
Complete name :
anything.ts
Format :
MPEG-TS
File size :
7.95 GiB
Duration :
1h 59mn
Overall bit rate mode :
Variable
Overall bit rate :
9 489 Kbps
Network name :
Video
ID :
2001 (0x7D1)
Menu ID :
5001 (0x1389)
Format :
AVC
Format/Info :
Advanced Video Codec
Format profile :
[email protected]
Format settings, CABAC :
Yes
Format settings, ReFrames :
4 frames
Codec ID :
27
Duration :
1h 59mn
Bit rate :
8 244 Kbps
Width :
1 280 pixels
Height :
720 pixels
Display aspect ratio :
16:9
Frame rate :
50.000 fps
Standard :
Component
Color space :
YUV
Chroma subsampling :
4:2:0
Bit depth :
8 bits
Scan type :
Progressive
Bits/(Pixel*Frame) :
0.179
Stream size :
6.90 GiB (87%)
Color primaries :
BT.709
Transfer characteristics :
BT.709
Matrix coefficients :
BT.709
Audio #1
ID :
2011 (0x7DB)
Menu ID :
5001 (0x1389)
Format :
MPEG Audio
Format version :
Version 1
Format profile :
Layer 2
Mode :
Joint stereo
Codec ID :
3
Duration :
1h 59mn
Bit rate mode :
Constant
Bit rate :
160 Kbps
Channel(s) :
2 channels
Sampling rate :
48.0 KHz
Compression mode :
Lossy
Delay relative to video :
-815ms
Stream size :
137 MiB (2%)
Language :
German
Language, more info :
Clean effects
Audio #2
ID :
2012 (0x7DC)
Menu ID :
5001 (0x1389)
Format :
MPEG Audio
Format version :
Version 1
Format profile :
Layer 2
Mode :
Joint stereo
Codec ID :
3
Duration :
1h 59mn
Bit rate mode :
Constant
Bit rate :
160 Kbps
Channel(s) :
2 channels
Sampling rate :
48.0 KHz
Compression mode :
Lossy
Delay relative to video :
-815ms
Stream size :
137 MiB (2%)
Language :
English
Language, more info :
Clean effects
Audio #3
ID :
2041 (0x7F9)
Menu ID :
5001 (0x1389)
Format :
AC-3
Format/Info :
Audio Coding 3
Mode extension :
CM (complete main)
Format settings, Endianness :
Big
Codec ID :
6
Duration :
1h 59mn
Bit rate mode :
Constant
Bit rate :
448 Kbps
Channel(s) :
2 channels
Channel positions :
Front: L R
Sampling rate :
48.0 KHz
Bit depth :
16 bits
Compression mode :
Lossy
Delay relative to video :
-748ms
Stream size :
384 MiB (5%)
Language :
German
Language, more info :
Clean effects
Text #1
ID :
2101 (0x835)-100
Menu ID :
5001 (0x1389)
Format :
Teletext
Language :
German
Text #2
ID :
2101 (0x835)-777
Menu ID :
5001 (0x1389)
Format :
Teletext Subtitle
Language :
German
Menu
ID :
2000 (0x7D0)
Menu ID :
5001 (0x1389)
Duration :
1h 59mn
List :
2001 (0x7D1) (AVC) / 2011 (0x7DB) (MPEG Audio, German) / 2012 (0x7DC) (MPEG Audio, English) / 2041 (0x7F9) (AC-3, German) / 2101 (0x835) () / 8001 (0x1F41) ()
Language :
/ German / English / German
UTC 2013-08-04 18:00:00 :
de:ZiB 20 / de: / news/current affairs / / 00:15:00 /
UTC 2013-08-04 18:15:00 :
de:Geld schlÈaft nicht / de: / movie/drama / / 02:05:00 /
UTC 2013-08-04 20:20:00 :
de:ZiB Flash / de: / news/current affairs / / 00:10:00 / Running
UTC 2013-08-04 20:30:00 :
de:X-Men Origins: Wolverine / de: / science fiction/fantasy/horror / / 01:45:00 / Not running
UTC 2013-08-04 22:15:00 :
de:Navy CIS: L.A. / de: / reserved for future use / / 00:40:00 / Running
UTC 2013-08-04 22:55:00 :
de:CSI: Miami / de: / reserved for future use / / 00:45:00 / Not running
UTC 2013-08-04 23:40:00 :
de:CSI: Miami / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 00:20:00 :
de:Geld schlÈaft nicht / de: / movie/drama / / 02:05:00 /
UTC 2013-08-05 02:25:00 :
de:Navy CIS: L.A. / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 03:05:00 :
de:Alles Betty / de: / reserved for future use / / 00:50:00 /
UTC 2013-08-05 03:55:00 :
de:Seitenblicke / de: / reserved for future use / / 00:05:00 /
UTC 2013-08-05 04:00:00 :
de:LazyTown - Los geht's / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 04:25:00 :
de:Der MondbÈar / de: / cartoons/puppets / / 00:10:00 /
UTC 2013-08-05 04:35:00 :
de:Nils Holgersson / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 05:00:00 :
de:Servus Kasperl / de: / children's/youth programmes / / 00:25:00 /
UTC 2013-08-05 05:25:00 :
de:Barbapapa / de: / cartoons/puppets / / 00:05:00 /
UTC 2013-08-05 05:30:00 :
de:Jake und die ... / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 05:55:00 :
de:Alles okidoki / de: / children's/youth programmes / / 00:05:00 /
UTC 2013-08-05 06:00:00 :
de:Die Pinguine aus ... / de: / cartoons/puppets / / 00:15:00 /
UTC 2013-08-05 06:15:00 :
de:Anna und die Liebe / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 06:40:00 :
de:Anna und die Liebe / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 07:05:00 :
de:HÈor mal, wer da hÈammert! / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 07:25:00 :
de:HÈor mal, wer da hÈammert! / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 07:50:00 :
de:Dawson's Creek / de: / reserved for future use / / 00:45:00 /
UTC 2013-08-05 08:35:00 :
de:Der Kaufhaus-Cop / de: / comedy / / 01:25:00 /
UTC 2013-08-05 10:00:00 :
de:Tom auf heiûer Spur / de: / children's/youth programmes / / 00:25:00 /
UTC 2013-08-05 10:25:00 :
de:Alles okidoki / de: / children's/youth programmes / / 00:05:00 /
UTC 2013-08-05 10:30:00 :
de:Disneys Der Fisch-Club / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 10:55:00 :
de:Scrubs - Die AnfÈanger / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 11:15:00 :
de:The Middle / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 11:35:00 :
de:Malcolm mittendrin / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 12:00:00 :
de:Malcolm mittendrin / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 12:20:00 :
de:Two and a Half Men / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 12:45:00 :
de:How I Met Your Mother / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 13:05:00 :
de:How I Met Your Mother / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 13:25:00 :
de:Malcolm mittendrin / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 13:50:00 :
de:Malcolm mittendrin / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 14:10:00 :
de:ZiB Flash / de: / news/current affairs / / 00:05:00 /
UTC 2013-08-05 14:15:00 :
de:The Middle / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 14:35:00 :
de:Scrubs - Die AnfÈanger / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 15:00:00 :
de:Scrubs - Die AnfÈanger / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 15:20:00 :
de:Die Simpsons / de: / cartoons/puppets / / 00:25:00 /
UTC 2013-08-05 15:45:00 :
de:Die Simpsons / de: / cartoons/puppets / / 00:20:00 /
UTC 2013-08-05 16:05:00 :
de:ZiB Flash / de: / news/current affairs / / 00:05:00 /
UTC 2013-08-05 16:10:00 :
de:How I Met Your Mother / de: / reserved for future use / / 00:25:00 /
UTC 2013-08-05 16:35:00 :
de:How I Met Your Mother / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 16:55:00 :
de:The Big Bang Theory / de: / reserved for future use / / 00:20:00 /
UTC 2013-08-05 17:15:00 :
de:Two and a Half Men / de: / reserved for future use / / 00:30:00 /
UTC 2013-08-05 17:45:00 :
de:ZiB Magazin / de: / news/current affairs / / 00:09:00 /
UTC 2013-08-05 17:54:00 :
de:Wetter / de: / news/current affairs / / 00:06:00 /
UTC 2013-08-05 18:00:00 :
de:ZiB 20 / de: / news/current affairs / / 00:15:00 /
UTC 2013-08-05 18:15:00 :
de:CSI: NY / de: / reserved for future use / / 00:50:00 /
UTC 2013-08-05 19:05:00 :
de:The Mentalist / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 19:45:00 :
de:ZiB Flash / de: / news/current affairs / / 00:10:00 /
UTC 2013-08-05 19:55:00 :
de:Revenge / de: / reserved for future use / / 00:45:00 /
UTC 2013-08-05 20:40:00 :
de:The Closer / de: / reserved for future use / / 00:45:00 /
UTC 2013-08-05 21:25:00 :
de:Unforgettable / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 22:05:00 :
de:ZiB 24 / de: / news/current affairs / / 00:20:00 /
UTC 2013-08-05 22:25:00 :
de:Defenders / de: / reserved for future use / / 00:45:00 /
UTC 2013-08-05 23:10:00 :
de:CSI: NY / de: / reserved for future use / / 00:40:00 /
UTC 2013-08-05 23:50:00 :
de:The Mentalist / de: / reserved for future use / / 00:40:00 /
I think there could be a problem with the pre-settings!
As i did buy PrE11 only for editing this and similar videos I would be very pleased if someone could help me solve my issue.
(Please don't tell me that I should buy Adobe Premiere Pro or any other version as them are much too expensive for my purpose and as PrE11 should be capable to do that job.)
Best regards

Just tested your suggested codecs. Works fine (at least on a 51s clip).
Only disadvantage: WinTV v7 (shipped with the TV card) refuses to show any image (just black screen)!
Regarding your last post: Details about the audio (a bit more compact)
Audio #1
Format :
MPEG Audio
Format version :
Version 1
Format profile :
Layer 2
Mode :
Joint stereo
Codec ID :
3
Duration :
1h 59mn
Bit rate mode :
Constant
Bit rate :
160 Kbps
Channel(s) :
2 channels
Audio #2
Format :
MPEG Audio
Bit rate mode :
Constant
Bit rate :
160 Kbps
Channel(s) :
2 channels
Audio #3
Format :
AC-3
Format/Info :
Audio Coding 3
Channel(s) :
2 channels
Channel positions :
Front: L R
In the presettings I didn't find a 720p 60Hz 5.1 setting (only with 1080i/p)
Thanks for help again

Help after rendering when I'm mastering a small video segment is duplicated elsewhere in the timeline, apparently I do some movement

help after rendering when I'm mastering a small video segment is duplicated elsewhere in the timeline, apparently I do some movement

Shane is trying to find out if you're working with material that's not in a fcp friendly format, like h264. It's also possible that your sequence is corrupt. Create a new sequence with the same settings, make the old sequence active, select all (command-a) copy (command-c), make the new sequence active and paste (command-v)

Sound problems after rendering

Hi,
Being that I have Premiere Pro 7.0, I am not too sure how much help I will get, but i was hoping that someone here could still help if all possible. Here is my problem. I thought I start practicing developing video lessons for 3d software. These lessons would be created using a screen captureing program, called camStudio. In my first lesson, my first try doing the entire lesson as one video, I found out that the video file size exceeded CamStudio's exporter file size allowance when trying to save out to Microsoft DV 1 AVI file. I then decided to split the lesson into 2, but final compose it as one video in Premiere Pro 7.0. Since the lesson was broken up into 2 screen captured videos, I thought it would make things easier if each screen captured video was in its own simulation. So, in other words, I have created 2 simulations in one project, and then I had nested both of them into the 3rd simulation. For example, simulation 1 was called lesson1 part a, and simulation 2 was named lesson1 part b, and the third simulation was called lesson1. Once I had everything setup, at first everything was working fine, meaing I could see the video and hear the sound tracks. However, after I choose to render the sequence using Microsoft DV11 AVI, I do not get any sound, and yet I made sure that the exporter exports both the video and audio. Furthermore, after rendering the project, going back to Premiere Pro's project, and pressing play, I get the error.... Disk Write Error: Verify drive connection, available disk space and disk access privileges
However, when I go inside simulation 1 or simulation 2, I still hear their sound tracks. One other thing I have noticed is that I get the sound back in the project if I move the orginal simulations into a new simulation. By doing that, I am then able to recover the project,. but if I choose to render again, the same process happens all over again.
Does anyone Have any ideas?
My Specs
Adobe Premiere Pro 7.0
Windows XP SP3
CPU 3.0GHz processor
RAM 512MB

so are you saying that the problem could be comming from how I did my recording with CamStudio? Not to change the subject, but you see, I am kind of lost. My goal is to provide some free video lessons. I was thinking my final encoded videos will be in DivX or XVid. CamStudio does offer users to compress to thise types of format. Howeveer, due to owning a very cheap microphone, those kinds that sit on your desktop, is causing me to have the biggest problem, since there is a good amount of background hissing noise in my recordings. So, I have been using both CamStudio for the screen capturing and Audacity to do the voice recording. Then in Audacity, I try my best of tuning up the voice and removing the background hissing noise. Once that is finished, I then need some sort of video editing software that allows me to put the video and my voice recodring together as well as splicing areas of the lesson where I stutter or slurr my speach a bit, which can be easily fixed in Adobe Premire Pro. However, my version of Premiere does not offer XVid or DivX encoding. I was thinking of using VirtualDub, but I really do not want to have 5 programs, just so that I can fix all of my problems, not to mention I have no $$$$ left. So is there a free better way?

How to retain the dialog messages defined in processRequest after rendering

In my page one piece of code is there as "oapagecontext.forwardImmediatelyToCurrentPage(null,true,null);"
which is used to render back to the current page,but after rendering the dialog messages which i have defined in processRequest are not coming.
My issue is how can i retain that dialog message.

Hi
You can try and use guard conditions or check the table for data, if there is no data in the table the application will return an error message.
Jarrod Williams

I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd.After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality?

I have a few wedding projects(1-2 hours)I am trying to export at full hd quality,than burn in idvd. After rendering for 8hrs I receive error code that states "file is too big". Please help? compressing tips without losing quality? or any other exporting alternatives?

Hey Z,
Thank you for the tip on exporting by media browser (large) from imovie. But of course, if it's not one thing it's another. Now that I figured how to export a large file from imovie, I have an idvd issue. I followed the instructions for burning from idvd and changing the encoding to professional quality and the burn speed to x4, but I am receiving an error that states the following,
Your project exceeds the maximum content duration. To burn your DVD, change the encoder setting in the Project Info window.
Project:
- total project duration: 79:04 minutes
- total project capacity: 4.327 GB (max. available: 4.172 GB)
Menus:
- number of menus in project: 1 menus
- total menu duration: 0:39 minutes
- total menu capacity: 37.370 MB
Movies:
- total movies duration: 78:25 minutes
- total movies capacity: 4.291 GB
I have searched in the idvd forum for similar issues and I am stumped at this point. I have tried deleting the encoding assets and re launching idvd with the changed preferences, and still the same error. I know you mentioned something about free hard drive space available, and I have very little left. 4GB to be exact due to massive hours of non-edited footage. I am not sure if this is why, but I do not recall ever needing free space to burn memory onto a separate dvd. I would be more than happy if I am wrong, and it would be a quick fix. Otherwise, the technical nightmare continues. It's all a learning process and your expertise is greatly appreciated! Thanks in advance.

PE7 - stop video from running after rendering text titles

Hi gang,
When I add manual "sub-titles" aka text titles to my videos, it works best when I render them as I'm going along with the ENTER key. That's fine but the video then wants to KEEP start playing from the start and that's driving me bananas. Can I turn this off?
Sorry, if this has been mentioned before.
cheerio
Petey

Hi Hunt,
Indeed, I would never want the video to playback automatically after rendering.
In PE7, it was exactly where you mentioned.
BTW - rearranging menus is part of the neverending game, that drives us all constant upgraders completey bonkers!!! Just like how AVI export dissappeared and reappeared into SHARE in PE 7. What a nomad! hehe
cheerio!
Petey

Red rendering line in timeline turns green after rendering but then reappears.

I''m a new user of Premiere Elements 10 and relatively new to video editing. My system info is: 2010 Mac Pro quadcore 2.66 Ghz with 12 Gigs of memory, NVIDIA GeForce GT120 512Mb running Lion 10.7.3. The red rendering line in my project turns green, as expected, after rendering but then reappears red after I close the project and reopen it. The project is saved regularly after rendering and everything works normally. No changes are made to any clips and as I stated the render line is green when the project is saved and closed. Any ideas what I might be doing wrong. Thanks in advance.

Thank you for that information. It kills about all of my theories.
Something is keeping PrE from seeing the links that it created to the Render Files, so PrE cannot find them - the link is dead.
I know so very little about Mac's, that I cannot even imagine where to begin. Maybe a Mac-user will drop by, and have an idea, and then we both will learn something.
Wish that I had more to offer, but good luck,
Hunt

Audio delay after rendering

Hello,
I'm a YouTuber from Poland who puts on my channel movies (named commonly gameplays) from variety of games. I rendered about 250 gameplays using Premiere Pro CS5.5 and CS6. Except for the raw video from the game, I also render my gameplays adding the video from internet camera and sound of my voice from TeamSpeak (material from the game, camera and teamspeak are recorded separately).
Recently I encountered a very wierd problem with my Adobe Premiere Pro CS6 - audio from the game is delayed after rendering movie. My voice is rendered as it should be with no delays.
Everything was fine earlier, I had no problems! And I haven't changed (consciously) anything at all im my Premiere Pro CS6 settings nor in my hardware. What is more important, when I render only half of the sequence or some part, audio is okey and there are no delays - therefore this excludes a hypothesis about beeing something wrong with my recording settings. It seems that is happening only when I render video from the beginning...
It may be important to say, that normally I record all videos with MSI Afterburner but recently I installed FRAPS on my computer. And than this problem came out. I have no idea how that may be related but it's just an observation. After instaling FRAPS I had another problem with memory paging file - games were closed when I recorded with MSI Afterburner due to insufficient virtual memory. Never had this problem either. I uninstalled FRAPS, reinstalled MSI, installed FRAPS again and now I don't have that problem. Another weird thing going on...
Edit
When I close Premiere Pro CS6 I receive a message that Adobe Media Core CS6 stopped working... may it be related?

Tammy,
If we've dropped a bit of time for this part of the edit, you now have time for more fun aspects of it.
While I will casually monitor my Meters, I spend much more time with a good set of noise-canceling headphones, listening critically. The Meters are basically to point up potential issues. With Audio, if you have not invested in a really good set of headphones, do yourself a big favor, and sneak 'em into the budget.
Glad that you got things toned down.
Now, let's go on to Lesson 02 - The Audio Mixer. Unlike adding Keyframes to a Clip, when your cutting is done, you can apply Track Keyframes to attenuate (also Pan, etc.) you Audio Tracks to suit. One would just change the Send in that Track to Write, or Touch, and "ride the gain" with the slider, as is required. I probably do most of my Audio editing there, than addressing the individual Clips. First thing that I have done is cut back a bit on the frequency of the Track Keyframes in Edit>Preferences, as I find the default to add too many (and you can go in and adjust these by hand, if you need to "smooth" things out a bit.). One caution: do this when you are satisfied with the cuts, Clip placement, etc., as these Keyframes are applied to the Track. If you were to remove a Clip, and replace it, those Keyframes would apply to that new Clip, whether you want them to, or not. This trips some folk up, if they do the Audio Mixer thing too soon in the editing. Wait until you are "in love" with your Timeline otherwise. It's like scoring a Project. One does that as about the very last step, or much work will be repeated, and that is not fun.
Good luck,
Hunt

Missing videos after rendering

Hello!
I'm a newbie with After Effects.
I have the following problem: I have a After Effects Project file. In the folder Media Holders there are files with names MEDIA HOLDER 1, MEDIA HOLDER 2, etc. How do I replace them with my files? With right-click option is not available "Replace Footage" option. I use Set Proxy->File and on preview I see my video, but after rendering there is no my video.
Regards!

Oh, thank you very much. I will try it soon

Strange problem after rendering!

Hi guys , could you help me please? my system is Premiere Pro CS3, Win Vista32, 2gb Ram , integrated ATI xpress 200m with 128mb (with the last drivers), core2duo 1.8.
My problem is the following: after importing an AVI 640x480 30fps clip shot with my sony digital camera t20, i add it to the timeline, i play it and it works fine but right after rendering it , it jumps and flick. It also plays fine with windows media player so i was wondering why !!?!??
Are my setting of the project correct? I used DV NTSC 48khz project, but dont think that is something about these settings right? could it be main settings of premiere? i also read that some people had problems using the same graphic card 200m with premiere and vista,could the problem be connected with it?
thanks in advance if you can help...

No. Sorry. I have seen video shot on the same camera at 24fps and at 30fps and the difference was barely detectable. Both scenes were lit the same and shot the same other than frame rate. If we slowed it down it was detectable. Once played on a 20' screen it was a lot more evident, however. When the footage took up my entire area of vision, then the stuttering of the slower frame rate was easier to see. But on a smaller screen, no.
The "video" look is caused by a lack of depth of field and a sharper contrast, both of which should be addressed during production, not post. Just slowing the frame rate just isn't enough to make it not look like video.

Artifacts created after rendering

Hi,
I'm using Premiere Pro CS3 to edit my animation movie.
When I was using my old computer everything worked just fine, but when I copied the project to my new computer I noticed that after rendering, some artifacts were created in some of the shots (the artifacts do not appear in the original files just after rendering).
I installed premiere again but that didn't help, also my graphic card driver is the most updated.
Anyone know what can be the problem?
Thanks.

That helped some but I still think I have some setting not right? I just upgraded to 6.0 and a new computer and just started having this porblem. I'm running an oracle with a ton of ram somewhere around 60 and really good graphics card I'm really surprised that I need to wait for a minute or 2 for the yellow render screen to go away and show my video again? Not sure just kinda quarky I think

Weird glitches after rendering

Dear people,
I did recently huge (for me) step from PRE 3.0 to PRE 8.0 (I hadn't know, there were 9 Version). Anyway, I had in my first video some weird artefacts after rendering my video, and I don't know, how to fix them. (With 3.0 I hadn't such problems, even if I used it already ca. 3 years for many similiar projects).
You can see this glitch between 0:59-1:10 of my video in the upper right corner.
http://www.youtube.com/watch?v=pp40ZjZ_lQ8
I tried it with various configurations, but it had always just various glitches. The youtube video was directly uploaded from PRE, and its quality is much more better than the glitch-full videos I exported as files. Do I do something wrong?
To my PRE project: it contains a video and many animated text layers. In the PRE preview, before rendering, everything looks good, but the rendering disappoints me :-)
Actually I wanted submit my video to some art video galleries, but I cannot since it's still a little bit buggy.
I would highly appreciate any help!
Thank you, people, in advance,
Merzmensch

Well, perhaps this was one of some differences to my previous videos: I usually use my Sony camcorder, but this time I used my digicam Ricoh K8. The video to this camera is fully incompatible with PRE (even if it's an AVI - I worked with another cameras before, but only with Ricoh K8 I discover incompatibility to just every video cut software), so I converted it through VirtualDub (using also MSU Cartonizer for special effects). As far as I cam recall, I converted it with Helix YUV codec, which I often use, because PRE 3.0 hadn't compatibility problems before.
About settings of the project, which details do you need exactly? I actually used the default settings. Here I did the screenshots of every part of Project settings:
http://s234.photobucket.com/albums/ee240/kosmopol/PRE%20settings%20Takahashi/
(Sorry, it's German version, I hope they haven't shuffled the settings) :-)
I have a feeling, that the problem is not with video footage, but with some PRE settings, since you can see in the glitch both levels: video and text together. Perhaps rendering failure?

Color linies after rendering

Hi
I have a good video clip with a horisontal sharp transition from blue to red. Then i apply Motion to the clip ( Scale 110 % ) After that I render the clip.
After rendering there is a thin green linie in the transition from blue to red.
Anybody knows how to get rid of this green linie ?
The clip mentioned above is a test clip which i have made. When I use Motion to my clips there are green or red shadows in the color transitions.
Hope for a helping hand - thank you

It's your monitor, computer monitors can not be relied on for color accuracy.
Try setting RT to Unlimited.
Put all your animation on V2, put a Shape (Generators > Shapes > Square) on V1. Make the Square the size and color you want. Before editing it into the Sequence, in the Viewer window, top left, enter the duration you need. This will be more stable with coloring.

Audio problem after rendering!

Hi everyone! I am having a problem with sound in my project after rendering. I am using Adobe Premiere CS2 , and in Audio track 1, I have someone speaking, and in track 2 I have backround music. When I play it back in the window, together it sounds perfect. After rendering, the voice becomes very crackly and distorted. I have tried rendering just the voice without the backround music, and it sounds perfect. It seems the addition of backround music is causing the distortion to the other track. I have tried rendering the backround music seperately and adding it in, but still the problem persists. I adjust the music so that when the kids are talking, the music dips down, and when they are not, I leave it at it's normal level. HELP..I am losing my grip on this one! Thanks so much....Tammy

Tammy,
If we've dropped a bit of time for this part of the edit, you now have time for more fun aspects of it.
While I will casually monitor my Meters, I spend much more time with a good set of noise-canceling headphones, listening critically. The Meters are basically to point up potential issues. With Audio, if you have not invested in a really good set of headphones, do yourself a big favor, and sneak 'em into the budget.
Glad that you got things toned down.
Now, let's go on to Lesson 02 - The Audio Mixer. Unlike adding Keyframes to a Clip, when your cutting is done, you can apply Track Keyframes to attenuate (also Pan, etc.) you Audio Tracks to suit. One would just change the Send in that Track to Write, or Touch, and "ride the gain" with the slider, as is required. I probably do most of my Audio editing there, than addressing the individual Clips. First thing that I have done is cut back a bit on the frequency of the Track Keyframes in Edit>Preferences, as I find the default to add too many (and you can go in and adjust these by hand, if you need to "smooth" things out a bit.). One caution: do this when you are satisfied with the cuts, Clip placement, etc., as these Keyframes are applied to the Track. If you were to remove a Clip, and replace it, those Keyframes would apply to that new Clip, whether you want them to, or not. This trips some folk up, if they do the Audio Mixer thing too soon in the editing. Wait until you are "in love" with your Timeline otherwise. It's like scoring a Project. One does that as about the very last step, or much work will be repeated, and that is not fun.
Good luck,
Hunt

H264 asynchron after rendering

Similar Messages

Maybe you are looking for