H323 Video End Point calling Cisco Video Point seamlessly-How to Implement

Dear All,
Undergoing following scenario which as per technology should work but not able to implement it:
1) Components available - CUCM 7.x, Polycom Video Phone (H323) , Cisco 7985 Video Phone , Normal PBX Phone
Requirement:
1) To assign a valid extension to all the Phone irrespective of whether it is Polycom, Cisco or PBX Phone
2) All the phone can talk to each other seamlessly
In case of PBX Phone= PBX Phone can reach to Cisco or Polycom unit via a PBX gateway. The calls from PBX phone is only Audio as PBX phone are not having Video support
Polycom Video phone can call Cisco 7985 without any access code.
Polycom and Cisco 7985 should register with their Valid DN to cisco Call Manger 7.x.
Any pointer toward the config for implementing this will be of great help
Regards
M

You can't loop anything you want.  You have to plan for it.  Have you planned for it?  The best you can do with it is add a couple of dissolves, then loop it.

Similar Messages

  • The video file jumping to the start point.

    Hello, Is anyone know why the video file, when he get to the end he is jumping to the start point, And Is there  any way to prevent this?
    thanks a lot
    anat/

    Hi Anat,
    Can you please confirm complete version of Adobe Captivate (Help > About Adobe Captivate).
    How have you inserted the video? multi slide synchronized video or event video?
    Is it jumpiing to the start point of the video or the start of your project?
    In which format have you published your output?
    Thanks.

  • Rendering .flv with cue points but maintaining video size

    When I render an .flv by exporting in After Effects I cannot get cue points however when I import the .flv to a Flash doc, the controller is the same width as the video.
    However, in order to get cue points, you have to add the video to the Render Queue in AE in order to see the cue points in Flash. But the video controller ends up wider than the video itself when imported to Flash.
    My video is 495 wide by 360 high. When I render in AE in the Render Queue, and then import to a Flash doc, the video controller is about 30 pixels wider on both the left and right of the video. This looks goofy. Is their a way to resolve this?
    Thank you.

    Thank you for responding. I tried to but what happens is that that there is about 15 pixels of black space on the left and 15 pixels on the right side of he video. This does not happen when I export to Flash, only when I add to the Render Queue.
    So If I adjust the video size in Flash, the video size changes however the black space still remains. Somehow AE is creating extra space black space on both sides of the .flv. Again, this does not happen when export to .flv.

  • Point 2 Multipoint Video

    Hi,
    I have CUCM 6.0.1 running with IP Phones 7985G. Point-to-Point video calls are working fine. But when i add another video phone to the call all the phones start displaying their self videos.
    Does anyone know how to configure Video Phones so that i can have Point-to-Multipoint Video calls as well as video confernces.
    Thanks

    I have already configured software conference bridge on CUCM and audio conferencing is working fine even on video phones.
    What my concern is that videos are not being conferenced, i.e. on point-to-point call both person can see each other at the phone display. but when i conference it on 3 or more person everyone see their own video NOT other party's.
    Any help.

  • When I try to answer a skype video call from someone, the call is ended before I can get it!  As soon as I click on the phone icon or the camera icon, it ends the call.  This only happens from one contact.

    When I try to answer a skype video call on my Ipad (2nd generation), as soon as I click on the phone or video icon the call is ended.  This only happens with one of my contacts.  I can video call them without any problem!  But not in reverse.  Any suggestions???

    You may have better luck posting this on the Skype forum to see if anyone else has had the problem.

  • Is it possible to hyperlink to a specific point in a video?

    I'm trying to create a DVD-style menu page within keynote.
    Ideally what I'd like to do is have a video on 1 slide and then create a series of hyperlinks on a menu slide that would hyperlink to specific points within that video.
    Anyone know if this is possible?

    You could use iMovie to split the video clip into each section as well. Do you need the option to play the entire video clip from start to finish? If not, you can have each video clip be its own Keynote file and have Hyperlinks to each individual Keynote and then there will not be one large file, but multiple smaller files. This of course will not work if you want to play the movie straight though.

  • Importing Power Point and Embedding Video in Captivate Question

    I am new to Adobe Captivate, but I have heard the following:
    1)     I can import a power point slide directly into Captivate 5.5.  
    2)     I can add a action buttion that when click, can play a short video embedded within one of the slides.
    My objective is:
    1)     When I click that action buttion, I want to play that short video embedded within one of the slides.
    2)     Each slide will have an action buttion, and embedded slide of video (different video).
    3)     When the video is completed, it returns back to display the original slide
    4)     The user can just look at the slide and just move to the next slide without showing the video.
    To accomplish this in Captivate 5.5, can I do this ?
    1)     I understand that one must place a button on the converted slide and also embed the video to another slide.  This is done by using the tool bar.
    Is it possible to do this using programing scripts or anything ???    I would have a many slides to do, and I would like to automate this process.
    I would appreciate any suggestions and help.
    Thank You,
    G

    Hi Eddie
    You will be able to use the Adobe Captivate he has option in
    order that you bring PowerPoint, videos in flv for inside him and
    to go out how swf

  • Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video?

    Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video? How can I fix this?
    Baffled in SB

    What format of MPG is this?  Is this an MPEG1 or MPEG2 video?  How was the video created?

  • Let a name following a specific point in a video

    've looked everywhere but found nothing
    is there any way to place a text and let it follow a specific point in the video ?
    example, I place a name in text above a certain person and this name will following the person
    Search everyway but cannot find it
    thanks !

    that is simple done with a 50$ investment to Motion5 ...
    which offers a Tracker.
    have a look (quick'n dirty test!):

  • Cue point code in video to open URL?

    I have a cue point in a video, named "CUE_POINT" and I'm trying to get a new URL to open when the cue point is reached.
    This is the code I've tried.  Any suggestions??
    import fl.video.MetadataEvent;
    mymovie.addEventListener(MetadataEvent.CUE_POINT, fl_CuePointHandler_2);
    function fl_CuePointHandler_2(event:MetadataEvent):void
    getURL("Black_Vault/vault.html");
    thanks,
    GL

    1. A cuePoint has to be attached to a certain point in time. Look up the docu: http://help.adobe.com/en_US/ActionScript/3.0_UsingComponentsAS3/WS5b3ccc516d4fbf351e63e3d1 18a9c65586-7feb.html
    2.In as3 the getURL method is not valid anymore, use navigateToURL() instead [google for examples how to use it]

  • Windows 10 Video driver has a yellow exclamation point

    P3 171  issues and windows 10 Video driver has a yellow exclamation point  in device manager . when installing the windows 10 vga driver it says it is not applicable (untested drivers Bahh) issues with the chpset drivers it will not load either
    [subject line edited to reflect new topic]

    Go ahead and install the 8.1 driver from Acer, it'll work better than the one you are using now.

  • How can I add a video in vlc format in power point?

    How can I add a video in vlc format in power point?

    Are you using a folder system to organize your music?

  • How would one skip from point to point that the video is changing while editing.

    How would one skip from point to point that the video is changing while editing, like if a certain set of pixels changed to white, and then mark it.?
    Basically, I have a set camera, and when certain objects change color I want to mark it.   Think of a baseball flying through the air off a pitchers hand, and be able to skip to each point the pitcher is in that position.

    The only method of this level of content analysis I'm aware of is with your eyes.
    You'll just have to wacth the video to find those parts.

  • Show image at certain points during embedded video?

    Hi all,
    Just before deployment, we have had a change request :-)
    I have slides with embedded videos, and these videos pause the slide until the video ends, the moves onto the next slide.  During the videos, we want certain images to appear in the slide, so, for example after 2:20 we would like an image to appear in a box in the slide itself.  Clearly I cant use the function of "appear after specific time", as the slide itlsef is only a few seconds long, but the video inside is over 5 minutes.  I have played around with an advanced action using  cpInfoElapsedTimeMS, but this displays the entire projects timeline and not the individual slides embedded movie time.  Is it possible to access the time in which the embedded video has been playing and hence make an image visible based upon that?
    I am using Captivate 5
    Thanks,
    Tristan

    Hi Tristan,
    You can do this in Captivate 5.
    You need to insert the video this way: Video > Insert Slide Video. Then you get the option to increase this slide duration to match that of video or even distribute this video on multiple slides (if the video is longer than your current slide). In either case, the total duration of slide(s) and video will match here. Captivate will also ensue that now this video plays synchronous with your slide (s). Something like, 10th sec of video will match the 10th sec of slide always if you start the video from the slide beginning.
    Once you reach this stage you can use "appear after specific time" to adjust your images and now these will match your video.
    These documents will help you further:
    Adobe Captivate 5 * Using slide video
    ABC of Rapid Elearning - Multi-video support and synchronization | Adobe TV
    Regards,
    Sony

  • Cisco Video Telephony Solution Reference Network Design (SRND)

    Below are links to two design guides focused on video telephony and videoconferencing. The first link is goes to the NEW Video Telephony guide while the second links to the existing Videoconferencing guide that has been referenced before in a previous thread.
    Cisco Video Telephony Solution Reference Network Design (SRND):
    http://www.cisco.com/application/pdf/en/us/guest/netsol/ns268/c649/ccmigration_09186a008026c609.pdf
    IP Videoconferencing Solution Reference Network Design (SRND):
    http://www.cisco.com/application/pdf/en/us/guest/netsol/ns280/c649/ccmigration_09186a00800d67f6.pdf

    Hi
    As long as this is new instalation I recommend you to use SIP on all of the end points where possible and integrate with CUCM using sip trunk this will give you two main benefits
    - the transformation of the called and calling number from and to CUCM will be easier
    -if have end point using H323 and communicating with other end using sip the vcs will do internetworking to this call and you will need license for each internetworked call plus the media path will go through the vcs not direct between end points for internetworking
    If you use sip make the end point name/sip usri as [email protected]  Calls from vcs to CUCM use search rules with trsformation so if end point dial 123456 only from vcs and the default call is sip vcs will send it to CUCM as 123456@sip domain.com you need to do transformation before sending it to CUCM and send it as 123456@cucmip. 
    This is just in brief and also using the expersss way you can have your sip domain registered over the Internet and configure dns srv record point sip ton the vcs public ip and Internet calls can come to your end point sip name directly no need to publish ip to others to dial you
    HTH
    If helpful rate

Maybe you are looking for