H55m-e21 Raid problem.

Listen guys i apoligize if im posting in the wrong place but i dont know where else to find a answer for the problem.
I have a MSI H55M-E21 and i really cant do a RAID1 in it.I'm using windows server 2003 r2 and i have done this process a lot of times already with other manufacturers.I go to Setup and put AHCI Support and make the process within Windows Server but the option to Add a Mirror doent appear(Integrated RAID and AHCI Drivers in the CD).I've checked the mobo info and i saw that she doenst has support to raid,but i've done RAID with the AHCI Support and worked fine.My English is not that great but i hope u can help me.Thanks anyway.

Quote
Phisically the motherboard has no support to RAID but i'm trying to use the OS to manage the RAID.
Yes, I know what you are trying to do. The lack of RAID support on the side of the SATA controller should not affect a Windows-based RAID1-Array or the possibility to create one.
Quote
I'll try to use another Cd to see if going to work.
What do you mean "use another cd"? Another CD for what?

Similar Messages

H55m-e21 msi computer loses boot drive

h55m-e21 msi computer loses boot drive once every week or so sometimes it might go for a couple of weeks before it does it again, then you have to go into the cmos and reset the boot drive and it is fine again for another week or so/ i have replaced the hard drive with a brand new samsung 750GB and it still does it and it is getting annoying.

It could be an intermittant problem in the 5V PSU circuit. Maybe try a test with an adequate amp PSU borrowed from a relative, friend, or coworker to power your system. If the PSU is modular or has an unused extra, try with another SATA power cable on the existing PSU.

SATA RAID problem on K8N Neo2 Platinum (nForce3 ultra) & winXP x64

I entered on MSI driver dowload page, put my model, and i found out that the RAID driver for win x64 wasn't released (nforce3 ultra), but in the same page was the driver for the nforce4, so I supposed it was compatible. I made the driver disk. press F6 and he askme for the drivers, ok, i introduce BOTH drivers, he detects perefctly the SATA RAID (stripping) format the disk, copy the files and ask me for some .CATof teh raid driver that wasn't on the zip file.... omit files, reboots, completes the instalation, but on the first boot of win x64 when it's just about to show the windows screen, a bue windows, and resets the pc so fast that's unreadable. fail safe start.. same crash.
I Installed win on an IDE and it run prefectly... In th other hand... without installing any driver the windows instalation recognices the SATA drives, but not the RAID. Maybe I just got to install the raid driver but not the SATA driver... the nforce3 driver form nvidia.com is pretty old... The real funny is that when i installed winXp x64 BETA i hadn' any problem... (winXP 64 doesn't admit the 32 bit driver=
Which driver i'm supposed to install? to INSTALL winxp64 on a SATA RAID and make it boot from there?
Thaks a lot

HI! i'm the one wih the raid problem on a k8n neo2....
That's what a i Did.. i unpacked the exe and copy the files in a floppy... question is: if i do that, windows instaler askme for some files that aren't in the .exe, anway it reconices the raid and everithing goes fine until the first BOOT on windos... it shows a blue screen, butremoves it so fast that i cant read it or pause the system. But i know it's a raid problem because if i install it on a ide disk it works.
The nforce3 drivers are almost a year old, and i'm not sure if nforce4 is compatible...
I think the're compatible because if you enter in msi driver download page and select my model, they put the Nforce3 and nforce4 for win64 and my model is only nforce3. The thing is they havent released the nforce3 for WIN 64.... So.. It's normal that win asks me for some files that ain't in the .zip file (i extracted the files o course) and Which driver should i put the Nvidia one year old nforce3 or the new nforce4. (the nforce3 for 32 bits is rejected by windows) or... i have to wait the new nforce3?
thanks for helps

MSI H55m-E21 OC issues

Hey guys, recently purchased a MSI H55M-E21 mobo. Got everything setup and I am having a few issues with the BIOS.
First, RAM is not listed at 1600Mhz which was listed on the site as being supported while OC. Most of the settings for this option have been greyed out and I am unable to make any changes to the memory.
Second, I am also unable to make changes to the CPU FSB. Multiplier is sitting on the max 21 which is default for my i5-760, the FSB is greyed out. Pressing F4, page up/down, +/-.. nothing I can do will highlight the FSB option to change it.
I have attempted to use the Control center but it bugs out and crashes often. Is this motherboard able to handle overclocking or not?
i5-760 processor
Patriot Sector 5 2x2gb 1600 rated memory
MSI H55M-E21 mobo

Quote from: zsde on 20-February-11, 03:49:16
Suggest you contact MSI technical. The CPU support list here http://www.msi.com/product/mb/H55M-E21.html#/?div=CPUSupport lists your CPU as n/aIt may be that your board does not fully support the CPU. All the supported CPUs are 73W and 83W, yours is 95W.
I hope that the VRM and other power circuits for this board were designed to handle your CPU.
That contradicts CPU support at MSI Europe:
http://eu.msi.com/index.php?func=prodcpu2&prod_no=2150&maincat_no=1
I imagine it's more because it's a low cost MB and really wasn't made for OC to begin with. If you wanted to OC then you should have got H55M-ED55 or H57M-GD65 or one of the P55M which have decent OC abilities. We see this all the the time with $50/$60/$70 motherboards. You simply can't expect them to OC like their more expensive big brothers. If you want to run with the big boys then it's going to cost you more $$.

H55M-E21 LAN off (LED off) in S3 state, can't use wake on LAN (WOL)

I'm using H55M-E21 and Win7.
I can put PC to sleep mode (S3) and can wake it up by PS2 keyboard. Now I want to try remote desktop to wake up and connect to the slept PC. I can't connect to it.
The LAN link is down, the link LED from the back of PC is off.
In BIOS -> Power management -> ACPI on, BIOS on, ACPI Stanby state = S3, EuP2013 diabled
In Wakeup Event -> Resume by PCIor PCI-E device enbled.
Please help.

There are a few things you should check. Go into device manager and open the properties for the NIC you are using for this remote connection. First click on the Power Management tab and make sure the options are checked to "Allow this device to wake the computer". I would uncheck the option to "Allow the computer to turn off this device to save power" if it won't work while it's checked. You should also check the magic packet box.
Click on the Advanced tab and enable the option for "Wake on Magic Packet" and "Wake on pattern match". I can't recall if the "Shutdown Wake-On-Lan" option is supposed to be enabled or disabled but try enabled first.
- D

P6N Hardware raid problems (sata 6,7)

I didn't find the sig things which i find odd but anyway...
here my rig
P6n Diamond
2 asus 8800gts in sli
i have 4 HDD WD 200 gigs sata2
(will go into detail about those lovely HDDS)
dvd burning sata (currently unplug)
dvd rom IDE plug in
2 gigs of ram 4x512
core duo 2.66 ghz
OK here the problem i wanted 4 HDDS in raid 0 or raid 1 or the 1+0 since i got 4 ... works GREAT fast machines until something went wrong which blew out my original 4 gigs ram 4x1 gig ram sticks and no matter what ram i put in it did not work...sent it in for RMA got it back ever since i got it back RAID BEEN ACTING UP!!! my raid would FAIL in 1+0(i assume it means stripeing and mirroring) and 0 my desktop would hang for a few moments doing gaming regular uses email internet music video uses OR IDLEING after it recovers i get a balloon saying that access fail er to X.X.M drive it use to be one drive now when one acts up the other three follows it examples that was in raid 0 and 1+0 same issues once in a blue moon wait that everyday when i have it in raid 1+0 i found a brand new harddrive in my computer the raid had degraded ? what that means well i know what but HOW ? how did it degraded? so i rebuild the array and geese what compleat fail er it dies and i loose all my stuff on it...now be for someone comes in such as MSI saying that my HDD may be at fault it not...infact it is currently in raid 0 just 2 of them on my other desktop working great and the BEST PART it is FASTER on the P6N i get 200MB burst and when it was in raid 0 i get like 120 continuous read and in raid 1+0 i believe half that speed or 90mbs in the older desktop i get 330mb BURST and i forgot what i got for continuous ready again probably 90 and it is stable plus i ran forever hour es test on the HDD surface scans errors and such and it in 100% good shape and ready to rock....so you guys know the HDDS were in sata 1-4 sata 5 was my dvd burner and 6-7 blank....so i was using the SOFTWARE raid and it not doing so well at all i did try using 2 drives i didn't do a proper test yet but i think it also failed...so seeing that I'm having allot of software raid problems decided to get from bad to worse i cant get anywhere with it so here the new set up now...
2 hdds ONLY and PHYSICALY installed since the other 2 are in the other computer i have an IDE dvd rom plug and drive 1 and 4 are plug into the sata 6 and 7 the black and red sata heads...NO BLUE LIGHTS AT ALL NEVER SEEN A BLUE LIGHT... as we know Jp1 and JP2 i think ? there are 4 pins there are 4 possible ways to set that up i tryed all four and no blue lights not even a blink i look close I CANT FIND THE LIGHT PHYSICALLY INSTALLED or i dint recognize it ( i hope i am being blind) what i mean there four ways i tryed jumping one pin from jp1 to jp2 instead of two pins on jp1 and i even put 2 jumpers on both jp1 and 2 and both jumpers the other way from jp1 pin two jp2 pin actually that 6 ways my bad no blue lights...
the BIOS is set to IDE didn't work in raid as i read from other places if things go well light come on and the BIOS sees it as a single drive which means no floppy to installed 3rd party drives AWESOME!!! cant get it working :( .. it not detecting it at all it saying i have NO HDDS installed at all
i sent the board in for a second rma..guess what they did they pulled it out and put it in a box and send it right back to me....the moment it got there i get an email saying it being shiped back and i was like oh nice they replace it...they didn't TOUCH it...so I'm calling them up the next day...to find out why they did that and to try to set up the SIL raid....
now what I'm asking is in case MSI don't help how you guys get yours to work or tell me how to get it working ....and if the HARDWARE raid is a pain then why is my raid failing too much in software raid dose anyone know how to keep the raid alive in software ? i originally wanted software so it supports 4 drives but it failing so I'm dropping it to two drives in the hardware raid and i cant get it to even w/e it is it need to do....any thing will help right now I'm stump i went to this forum spent all day looking through it and tryed some stuff no luck :(
I'm using an ASUS board on my older desktop for 2 years straight more or less it still in raid 0 NO ERRORS it is sata1 that the HDD only maxi um speed with 2 sata1 in raid 0 it acts like 1 sata2 drive and i never had to reinstalled my OS for 2 years and it gets better the ORGINAL motherboard for that old desktop was an MSI and right now that original board is on my self causes a lil device fryed ( don't think it msi fault but got fed up with that board with allot of bugs it was a NEO F or something really old lol....
awesome a spell checker :D

i dont know how two memory stick whould make a diffrent but to answer your question no i havent the goal is to have all 4 sticks and yes they work great i put them in my old system as well and was able to see incrase of performance even though it two gigs all my other hardwares are working find cause when the mainboard was sent in for repaires i move some parts over so i can play SOME games while i wait...now for the power supply it has MORE then enough power it is a 1200 watt thermaltake with 4 12v rails 2 are 20 amps and the other 2 or 36 amps.. 5v rail is 30 or more but the 12 v rail are acurate i was studding it so i can properly connect the 36 amp to my video cards all power cord are plug in like i said all hardwares are working fine causes they were tested befor and none of them were at faults..
however i will try the memtest86 now dose it need to have an OS installed (dont have it causes it wont see my HDDS in sata 6 and 7) i have to head out in a bit but when i come back ill check it out causes the orginal rams were working find and everythign was happy untill the motherboard blew out and took out 4 ram sticks so i brought a new one from a diffrent brand wich fell into the compatible list of ram for this board the other one was not "comptiable" thank you be back shortly...
i forgot to mention befor i whould like a good list of directions beside the one in my manuel of how to set up the sata 6 and 7 raid if wores come to wores im going to back up my old HDDS wich have been working great and move it over to the HARDWARE raid and see if it works i will post what i find out but in the mean time the proper set up of the raid hardware will be nice in case i did something wrong thank you

NEO4 Plat Sli SIL3231 Raid problem - Can't boot after BIOS Flash!

Hi, I have and Neo4 Platinum SLI. I had "the problem" a while back with the nVida raid where there was a hang on shutdown. I then created a RAID0 using my two Rators on the SIL3132 controller, and have three hitachi drives hooked up to SATA1 - SATA3. Back then, I had trouble getting my SIL3132 array to be the main boot volume. I could boot when no other drives were attached, but as soon as I attached them, I get the boot disk error after post. Somehow I got it to work, but not think this time, I flashed the BIOS and ran into the same problems, as the BIOS got reset.
First, I went in and re-enabled RAID on the sil3132 controller, and change the boot order to have the RAID voluime be the first boot device, and my other drivers be the next on down the line. Upon rebooting, my system hangs after verifying DMI pool at a blanksscreen for 5 - 10 minutes then gives my the "missing HAL.dll error". if I go back into the BIOS and disable SATA1/SATA2 and SATA3/SATA4 my computer boots just fine. I even completley disconnected my three drives an my system boots just fine. I have searched these forums and could not find anything close to my issue and wondered if it is something I am just missing in the setup. I will say that at POST my IDE devices has always read:
IDE Primary Master [None]
IDE Secondary Master [None]
IDE Primary Slave (my first DVD/R drive)
IDE Secondary Slave (My second DVD/R drive)
IDE Third Master (a 250gb drive)
IDE Fourth Master (a 250gb drive)
IDE Fifth Master (a 250gb drive)
IDE Sixth Master [None]
Is this normal? all my hard drives are SATA. the raptors and three SATAII drives.
Any help would be greatly appreciated. Since the Nvida raid problem seems to have been fixed (as far as I read) I would like to go back to using the nVidia raid controller. I just need to back up my system first!
Thanks in advance.
J

Jkmet,
I have noted the same problem, with a USB Pen drive.
If I leave it plugged in and shut down, the next time I cold boot it tries to boot for the pen drive. What I found out the any time you add a drive before booting the BIOS places it at the top of the Hard Drive Priority list making it the boot drive. Same thing happens when I plug in a new SATA and does not mater where it is connected. So, what I have to do any time you add a drive with the power off you have to boot to BIOS reset the Hard drive priority list, then save, exit and reboot to boot from you windows drive.
I am sure this is a BIOS Bug, but MSI states that the way it should would work.
Roger
When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings. It is almost impossible to estimate what your problem is without knowing something about it. Here is the link to the web site.

K9A2 CF cold boot and RAID problem

Hi,
I am struggling with my mobo regarding recent cold boot issues and the problem to set up RAID on the SB600 chipset.
Here's my rig's description:
MSI K9A2 CF rev 2 (I believe because of the red heatsink) with the latest available bios flashed using the forum's tool.
Phenom 9850 BE (stock, never OCed) cooled down with Asetek closed-circuit watercooling.
2x Radeon 4850 1 Gb crossfire
4 Gigs of RAM (Nandya Technology)
HDD WD velociraptor 150 go, WD black caviar 640 go, 2x WD 1 To green caviar all drives are SATA-2
1 PCI SiI 3512 sata controller for the sata ODD drives (DVD + DVD burner)
PSU is advent 750 W
OS: Vista 64 bits home premium working with AHCI drivers
So here is the deal: the system has been running fine for about a year.
I recently bought two 1 To HDD to set up a RAID 1 for backup purpose. The goal is to run the velociraptor as system disk (which it is currently) in raid 0+1 jobd (say standalone), the WD 640 go as data disk raid 0+1 jobd (say standalone) and the two 1To as raid one array from the SB600 onboard controller.
So I flashed the bios to make sure I would have the latest raid rom. The flash was performed with the forum's flasher without a problem, followed by a load defaults and a clear CMOS to be on the safe side.
Since then, I have random cold boot problems. I fire it up, all leds and drives are on, but no post and nothing on screen, not to mention no beeps whatsoever. I already checked the connections, mobo condensators... everything looks ok. The system was bought pre-built and was working flawlessly beforehand. I need to power it off manually and restart it once to a few times and then it post and boots to the OS without a problem.
Is there any specific option I should look for in the bios to change that? I assume I might have made a wrong configuration at some point.
Concerning the RAID problem I cannot access the SB600 onboard Fastbuild utility as long as the PCI sata controller is plugged in --> I get the "Not enough space to load PCI rom" error message. Without the PCI card I can access Fastbuild and define arrays without a glitch. But if I disconnect the card, I no longer have optical drives
Does anyone have a clue how to use the SB600 in raid mode along with a PCI sata controller?
Also, when RAID is setup, arrays defined and all HDDs recognized by the bios, is there a way to make Vista load the raid driver without reinstalling from scratch? For now I can use SATA drives in AHCI mode but get a BSOD whenever I try booting from RAID.
I know that's a lot of questions but I could really use some help. I have been roaming the web and could not find anything.
Thanks in advance for your insight.
Cheers

Quote
Concerning the RAID problem I cannot access the SB600 onboard Fastbuild utility as long as the PCI sata controller is plugged in --> I get the "Not enough space to load PCI rom" error message. Without the PCI card I can access Fastbuild and define arrays without a glitch.
This is common problem with boot-roms, the BIOS can't handle multiple of them, only 1 if you use raid.
So disable the PCI-Sata bootrom or disable the RAID.
This is a BIOS limitation, nothing you can do about it.
AHCI is a type of RAID also.
What you see is normal, the BIOS doesn't have enough hooks to put a Boot-rom in, and exspecially the RAID MUST need one to function.
Other solution is to use Windows software raid and put the RAID controller in normal-mode.
You won't notice the speed difference anyway as the onboard is a soft-raid as well, but then done in the BIOS, however in both cases it's the CPU that must handle them.

Raid problem on Neo2 Platinum

Have just bougtht a Neo2 Platinum.
Have also bought 2 x WD 80 Gb SATA HD, because I want to run Raid 0
In the bios I enable Raid on both chanel 1, 2, 3 and 4 and in the Bios it detects the hd. But when I leave the bios and push F10 to go into the Raid configurations it detects the drivers, but freezes up and I can do nothing. It shovs Mirrored in the menu, and the 2 hd in the "add" colum.
Any input would be appriciatet.
Thanks!!

HI! i'm the one wih the raid problem on a k8n neo2....
That's what a i Did.. i unpacked the exe and copy the files in a floppy... question is: if i do that, windows instaler askme for some files that aren't in the .exe, anway it reconices the raid and everithing goes fine until the first BOOT on windos... it shows a blue screen, butremoves it so fast that i cant read it or pause the system. But i know it's a raid problem because if i install it on a ide disk it works.
The nforce3 drivers are almost a year old, and i'm not sure if nforce4 is compatible...
I think the're compatible because if you enter in msi driver download page and select my model, they put the Nforce3 and nforce4 for win64 and my model is only nforce3. The thing is they havent released the nforce3 for WIN 64.... So.. It's normal that win asks me for some files that ain't in the .zip file (i extracted the files o course) and Which driver should i put the Nvidia one year old nforce3 or the new nforce4. (the nforce3 for 32 bits is rejected by windows) or... i have to wait the new nforce3?
thanks for helps

MSI KT3 ultra aru Western Digital 200GB raid problem

Hi!
This is what I've got.
KT3 Ultra-ARU (MS-6380E)
AMD 2000+
256 MB 333mhz RAM (AMD Compatible)
Seagate ST330630A 30GB (an old drive)
Maxtor 6L080J4 80GB
Maxtor DiamondMax Plus9 6Y080L0 80Gb 7200rpm 2Mb UDMA133 Fluid IDE
Western Digital Caviar WD1800JB 180Gb 7200rpm Special Edition UDMA100 IDE
Western Digital Caviar WD2000JB 200Gb 7200rpm Special Edition UDMA100 IDE
Promise 100 IDE-controller
Creative Geforce MX 440
Lite-on LTR-40125W
NEC ND-1300 DVD
And the configuration:
IDE1: Seagate (Master)
IDE2: WD1800BG (Cabel Select)
IDE3(Raid1): Maxtor 6LO80J4 (Master) and Maxtor 6Y080L0 (Slave) raided as an single drive
IDE4(Raid2): WD2000JB (Cable Select)
IDE5(IDE-controller1):
IDE6(IDE-controller2): NEC ND-1300 (Master) and Lite-on LTR-40125W (Slave)
And the Software:
I've updated all the software drivers so I've got the newest and I'm currently runnign Win2k SP3 with almost every patch installed on it.
And finally the problem:
When I've hook my WD2000JB to the on-board raid everything seems to be working normaly. The bios finds the drive and makes a new array. Win2k boots up and finds the drive and I can create an partition. But when I've try to format it it the computer starts to freeze for a while and then acts like normal again. The HDD-led blinks as it should during the "normal" time, but when the comp. freezes it stops blinking. The formatation stops at 7% and the HDD-led stops lighting. I don't get an error eventhough it was several hours since it stoped. And the formatation takes like 30min for 1%.
When I connect the WD2000JB to the IDE3 I can format it and it acts just like normal. I even did a full system test with the System tool found on Western Digitals support site and it didn't find any errors. But when move it to the raid-IDE the errors return. I've get Error reading / writing to disk and when I've did a chkdsk I've got the "Coudn't use Device) so I did a scandisk and it found very very many errors so it completly ereased everything that was on it.
And when I've run Western Digitals program again i've get an error (Disk error read/writing) error code: 0113.
Can it be that the Western Disk doesn't work well with Raid? I've haven't heard anything about that, so...
Best regars,
Mathias

You can have a look at my hardware below...
Chassis: Antec 1080B (300w PSU / 180w COMBINED)
Mainboard: MSI KT3 Ultra ARU
CPU: AMD Athlon XP 1800+
Display: ABIT Siluro GF4 Ti4200 AGP 4X
DVD/CD-RW Combo: HL-DT-ST RW/DVD GCC-4120B
Floppy: Panasonic 1.44MB
HD: Quantum Fireball Plus/AS 30.0GB UDMA 100
Keyboard: Microsoft Internet Keyboard Pro
Monitor: KDS Visual Sensations VS-190
Mouse: Microsoft USB Wheel Mouse Optical
NICs: 3Com 3C900B / DLink DFE-530TX
RAM: Micron DDR 266MHz (2x256MB DIMMs)
Sound: Avance AC'97 Audio
I've had similar problems where my system becomes very unstable at higher bus speeds. Installing Windows XP simply didn't work very good. However, I have ordered a new PSU today as a solution to this problem. Basically, CPUs and video cards are much more demanding and the more devices you have in your computer the more power you're going to need. I recommend purchasing the Enermax EG465P-VE (FCA) 450W ATX PS. It has a higher amperage rating and will most likely solve your problem.
Check your PSU and your bus speed settings...

MSI 865 PE NEO 2 (MS-6728 v.1) raid problems

Hello guys,hope somebody can help before i throw everything out of the window.
Hi had this mobo since 2003.
p4 2.66 800 fsb
memory pc 2700 333mhz
Ati radeon 256 mb
2 ide hds 120gb each on onboard promise as raid optimized for performance (raid0)
Everything start about a month ago.
suddenly Pc dont boot from array.( i think was a power cut)
after playing a bit around I went to fast build (ctrl -f ) delete the array and with option 1 auto detect the array again.
Pc booted and everything was fine,then messages like " windows no disk error" start to pop up everytime i boot up again.
I taught about malaware of some kind and even try to reassign a letter for hds that always appeared as "C".
then very frustrated I had the "brilliant" idea of using window restore point to restore windows some time before I had this problem.
Then no more boot guys the man lost control of the machine.
i tried to use recovery consolle, when i go "chkdsk" says: disk appear to have 1 or more unrecoverable errrors.
MAP do not shows the disks (maybe `cause raid?).
the funny thing is that on fastbuild (ctrl-f) a bootable array is present and "Functional",but when i do option 1 (array autoset up) says "no available disks".
I have tried to reinstall Promise pdc20378 driver(cannot find original floppy anymore so i have download driver) to reinstall windows XP(SP2),pressed F6 and then s messages says unexpected error on line bla bla bla.
It does not allow me to install a fresh copy of xp.
Do you think is the promise raid controller fault?
do I need to change/reinstall the driver(maybe i have downloaded the wrong 1).
There is not very important stuff on hds,just years of downloaded movies and songs,which i would like to keep if poss.
Any suggestions before I throw this superb mobo of the 2003 and get the new p35 chipset?
Is the machine finally beat the man?
I thank you all in advance
A sleepless man

Thanks HenryW,
I have create the dikette and done the test.
It did not recognize the disks on the onboard promise ata raid.....so i plug them on the normal ide
I ve done quick scan first and 1 of the disk came up with error 0x73 (defective device ..excessive shock),
then i ve performed advanced scan on the same disk and gave me a different error code 0x72 defective device ..S.M.A.R.T failure.
I guess 1 of the disk has gone,unless i can repair it somehow with this utilities,or disks have to be read 2gether on the raid controller..
Well i ll try to see on hitachi website,any more suggestions please let me know.
I thank you for the great help you are giving

Re: Qosmio G30 - RAID Problems on OS Installation

I've had my Qosmio G30-161 for half a year, and thought it'd ought to be time to reinstall the whole thing, so i could get rid of stuff i didn't need (Programs, Viruses and non-interesting video clips).
So i took my XP MCE Cd and tried to install, and i got guided through and come to the place where i needed to choose between 1st Unknown, 2nd Stripping, and 3rd Mirroring. I choose the stripping as i wished my harddrives to be in one. Then when i pressed "next" it gave me the error message "1005 - HDD not ready?"
I've tried going into the BIOS and chaneg the setting to different settings that Toshiba told me to, but it also warned me that if i changed the settings my OS would have to be reinstalled. No problem there. But i still get the same error message "HDD not ready?". So now i have to use another computer than my own to check the forums and mail etc.
Anyone know what i should do? I'll be glad with anything as long as i can have both my harddrives (60GB+60GB), and a working OS. :)
Please help, I'm urging for it, since the computer is the one i use for my school work. Feel free to ask questions about system stuff. If you have an answer, please let it be simple, since i realy don't wanna mess up again ^_^

Please check the details in user manual about the RAID installation.
Usually if you are using the clean Windows XP disk then you will have to include the RAID drivers firstly.
Without preinstalled RAID drivers the HDD will be not recognized and you will be not able to install the OS!

Mac Pro small business server; RAID problems

Our company runs on a small network consisting of 8 workstations (iMac's) and 1 dedicated server: a 1,5 year old Mac Pro running OS X Snow Leopard Server. This machine has 2 hard drives of 1TB each, running in a mirrored RAID configuration. This configuration holds the OS X system and the data. Because the hardware RAID was so expensive, I chose the software RAID controller OS X offers instead.
All this ran fine for the first 1,5 years, until yesterday... I ran an OS X update and the Mac Pro needed to restart after that. After the machine rebooted, I got a gray screen with the blinking folder-with-questionmark icon telling me no bootable drive could be found. I tried booting from the install DVD and that worked, but after I started DiskUtility to check the hard drive for errors the computer did not find any hard drives, only the DVD. Luckily I made a backup (clone) to an external Firewire drive just before the update and at this moment the server is running from this backup, so no harm done.
How can I solve this problem? Why can't my Mac Pro find it's drives? Is it possible to circumvent the RAID software and boot from one of the two disks or are they formatted in a special way?
My second question is on how to prevent this in the future. I still think the Mac Pro RAID controller is way too expensive, but I read that it's not that smart to use (software) RAID as a bootable drive (of a server). Because of this, I am looking at external options, like the SmartStor NSx600 Series through Firewire. Could this be a better way to go then the software RAID OS X offers or does this external solution have other disadvantages? (speed? reliability?)
Thanks in advance for your input!
Mario van Ginneken

Who is your ISP...?
What is the ip address of the modem..?
What is the ip address of the router..?
Where is the switch and server connected...?
What is the ip address of the server...?
How you are able to see the Wireless network if you have disabled the SSID broadcast on the router..?Re-check the settings on the router.

RAID problems, cant choose my system HD

hi there
i recently added an old 40GB HD to my AGP Powermc G4, whose system HD is 80 GB (15GB left)
i wanted to join the two together in a striped RAID set-up so that things like iMovie run faster, but when i use disk utility and it prompts me to drag two volumes into the RAID space, i can select the 40 GB but not the system HD
any ideas why not??? the help utility says that RAID setups cant be perfromed on disks that are partitioned, mine apparently has an apple map partition (no idea what it is or how it got there!)...is this the problem?
thanks a bunch

Hi-
I think you may be going about this a bit wrong. I am going to give you a couple links to read:
Please read about RAID 0
http://docs.info.apple.com/article.html?artnum=106594
Steps to set up a mirror RAID (1), though basically apply to RAID 0:
http://www.frozennorth.org/C2011481421/E20060221212020/
In the readings, you will notice that:
-The setup of the RAID is part of the installation process (requiring initializing/erasing of the hard drives).
-Using different size drives will result in a RAID 0 equal to the size of the smaller drive.
-Backing up all system software is important prior to starting the setup.
Your hard drive has an Apple partition map as part of the initialization (formatting) process. To have "partitions", at initial install of the software on a drive, one must use Disk Utility to create the partitions, which will be seen as seperate volumes (like seperate drives, only on one drive).
If you have the partitions in place, origionally, you could proceed as you are trying. To do so now, will require the erasing, reformatting, and partitioning of the drive. You will then need to reinstall all software and files.
In the frozen north link, the explanation of using an external drive, to back all files to, prior to setting up the drives for RAID, is as I would advise you to do.

Msi k2n9 diamond raid problems/questions

Hi, yesterday I bought 2 hard drives western digital 1 TB Caviar Blue 32mb cache each and wanted to make a raid stripe array, so they work as one and are twice as fast.
I had problems installing windows XP, so I tried windows 7. It detected the raid array, partitioned it, and installed the windows, but in the device manager I got other devices -> RAID Controller and no drivers for it. I also have a Coprocessor, but that may be the chipset drivers, that I didn't install yet.
The windows 7 is currently installed on the array, but I can't really see the performance difference. All disk information tools say it's currently 32 cache, shouldn't it be 64? And the speed is the same ~ 40-60 mb/s copy rate, 100mb/s sata-sata transfer rate.
With windows XP I tried installing the extra drivers from the web site from a floppy drive during installation, but the installation didn't detect the array at all.
Can somebody give me a clue how to fix my problem? And if you have any idea what software can I use to check the raid transfer rate and proper performance?

Quote from: Fredrik on 28-October-10, 02:45:27
Hello! It is a bit "dangerous" to help someone without knowing what the system looks like. What little you said, K2N9 motherboard, doesn't exist. Have a look here http://www.msi.com/index.php?func=prodarchive&maincat_no=1 Go to the title "AM2", because a fair guess lands you there. In order to help with your driver questions we need to know what the drivers are for, you see. An alternative would be to go to Nvidia's site, where you can pick most things you need: www.nvidia.com.
Coprocessor? Might it be - if you in fact have a processor - there are more than one core?
The cache thing is a little new to me, but one must remember you have one disk now, not two. Partitioning deals with the first bytes of data on this single hard disk, and not with the "RAM" memory.
Noticing a difference can be hard, but if you were to return to no-RAID status you will, for a little while, hate the longer boot-up time and slower start of programs. Since it runs at all, 100 mb/s read time is not out of order.
well i misplaced the numbers, it's k9n2, it's not that big mistake, and I know my system well. I have two disks, but one array, and i think the cache must be 2x, because the idea of raid 0, simultaneously writing bits on both disks. The logical idea is that if you write something to e drive with 32 mb cache you will be able to write the same thing on two drives with 32 mb cache each which makes it 64 mb
The coprocessor part is solved, after I installed the chipset drivers, but the raid thing is still there.

H55m-e21 Raid problem.

Similar Messages

Maybe you are looking for