H55M-P33 Can't Connect to Internet or Install the LAN drivers.

I cannot connect to the internet. I have a working ethernet plugged in. I checked the lights and they are working but I still can't connect to the internet. I ran the Windows Troubleshooter and it said that I needed to update my drivers. I tried to install the drivers for networking/LAN and it told me there were no drivers to install. I'm stuck on my crappy laptop until this is fixed 

Yes, I installed all of the drivers. A few months later I tried to install Ubuntu and accidentally formatted my hard drive. The internet would not work in Ubuntu, so I tried reinstalling Windows 7. Internet still would not work. I tried doing the troubleshoot in Windows 7. It told me to reinstall the drivers. I put in the disk and tried to but the LAN button is greyed out and I cannot install the drivers.

Similar Messages

  • After i update my ipad 2(wifi 3g/64g) to ios 5.0.1..everything works ok except 3g  can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

    after i update my ipad 2(wifi+3g/64g) to ios 5.0.1..everything works ok except 3g  can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

    i am at SAUDI ARABIA and the Service Provider is (STC) i found that the APN setting has to change from (jawalnet.com.sa ) to (afaqwireless.com).. NOW 3G OK

  • I can't connect to Internet. On the list of wireless connections, I have Wireless and thats it. I reset connection networks and it didn't change anything. Please help.

    I can't connect to Internet. On the list of network connections it has Wireless and thats it. My network isn't on there. I reset connections and there wasn't no change. Please help.

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • TA20713 Can I connect and IP Phone to the LAN port on Airport Express?

    I am having difficulty connecting my internet phone to the internet.  I have a Comcast Modem with only 1 ethernet port which is connected to the Airport Express.  We are using a secured wireless network and I do not have a way of entering a password or identifiying the network on the Internet Phone.  Will I be able to connect the phone to the LAN for Internet access or do I need something else?  Normally I would simply try this out, but we have an old Airport express as the primary wireless router and we'll need to re-work out in home network a bit to get the newer Airport closer to the phone.  I'd like to know if this is doable before we put all the effort in.  Thank you

    Tampadeb wrote:
    Can I connect my Xbox 360 to the Ethernet port on my fios box? I have a wireless connection right now but is slow and lags. For me to run an ether from the router it would have to be very very long and go the the kitchen. So I was wondering if I could get it via the Ethernet port on my box directly into my xbox
    The Ethernet port on the "fios box" (I assume you are referring to a DVR/STB) is not active.  However it's easy to use a MoCA adapter to get a direct connection if you have a working coax outlet.  Simply search "MoCA adapter" in the "Ask the Community" search box for details.  Also look here:
    http://forums.verizon.com/t5/High-Speed-Internet-DSL-and-Dial/Connecting-To-The-Internet/m-p/599649#...

  • Adobe cloud application manager - can not connect to internet

    To ADOBE - The Adode cloud Order no is DSSY006786009DT and is current
    The Adobe cloud application manager - can not connect to internet even though there is internet connection and says it might be time zone error but that is correct  - Sydney Australia
    Question:
         1. Is anybody else having this problem
         2. How do we fix
    I already changed the time zone east coast US - did not change anything
    Could it be a corrupt program - thus requiring to reinstall program Application manager
    I am using Windows 7.
    It has been like it for ten days - It asks to log in everytime I turn computer on
    All programs in Creative Cloud work
    Any suggestions and solution
    Online help and phone help had no solutions other than what I suggested - that is reload application manager
    Thanks for help
    Ian Cleland

    The Creative Cloud File Synching was just offline, should be online now again.
    See top off: http://forums.adobe.com/community/creative_cloud/creative_cloud_connection
    Maybe that was your problem.

  • Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

    just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

    I just had a similar problem.  Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it.  if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on.  i had to turn bluetooth off and then manually enter the DNS number. 
    My solution also came after I re-started my network and reset all the settings on the ipad2.  The DNS number then showed along with IP submet Mask and router.  I used that dns number to enter into ipad1 after turning bluetooth off on it.
    Totally unscientific fix that may have been more coincidental than correct but you might try it.  BTW--no idea how bluetooth even got turned on to begin with.

  • Ipad2 -can i connect to internet  using a data card

    ipad2 -can i connect to internet  using a data card

    This article:
    http://edcommunity.apple.com/ali/story.php?itemID=18585&version=6330&pageID=1582 9
    depending on your experience level should tell you all you need to know.
    You don't need mobile me, you just need to know your mac's ip and have vnc
    client software of some sort running on the machine you are travelling with.
    Read the entire article, as once you get past the part about monitoring multiple machines there is some useful info.

  • Can't connect to internet on my old g4 flat screen, network + airport ok

    I installed an airport card on the g4 (dome) and connected to our wireless network, which gets a signal, (though the status is "not available"). I can't connect to internet (server not recognized), and every time I check the internet assistant app, the setting has been changed back to modem. The router is in the basement: my iMac is on the first floor and works fine, the g4 is on the second floor. Is that too far away? Do I need to update the g4? Two minis also work fine, one on first floor and one in basement. Any help appreciated.

    Which iMac G4 do you have? Some iMac G4s are 802.11b while the later ones were 802.11b/g.
    If your wireless network is configured for "802.11g only", the older 802.11b iMac G4 won't be able to connect.
    If your wireless network is configured for "802.11n only", the iMac G4 won't be able to connect since it isn't compatible with that.

  • Can't connect to Internet on my ipad

    Can't connect to Internet on my ipad I've tried everything nothing is working. All my other electronic s are working except the ipad help

    I don't know what you mean by "everything", but here is a comprehensive Wi-Fi troubleshooting guide:
    http://www.apple.com/support/ipad/wifi/

  • IPod no longer detect the router and can't connect to internet

    Hey guys, i'm new in the community and thought that you may can help me with a lil' problem.
    I bought my iPod one month ago and at first successfully connected to internet, then download the iOS 4.3 and continued working well for a few days 'till it just stop connecting to the web. I searched everywhere and found some things that helped but not solved my problem.
    I have all my network data, the IP, Subnet Mask and DNS, the only one that does NOT work is the Router. I even tried putting the numbers myself by Static, but it didn't work.
    Can somebody help me or tell me what da **** is goin' on?
    By the way, my Internet service is Prodigy Infinitum ('cause i'm Mexican).
    Thanks(:

    Try:
    - Resetting your iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Powering off and then back on your router
    - On the iPod reset netwokr settings: Settings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Can't connect to internet - but all settings seem correct!

    My G5 can't connect to the internet (but my Mac Pro can). I've just had an engineer out because I thought it was the cable connection (I connect via a cable modem). Yet I can ping a host via the Network Utility when I boot from the Tiger DVD - so there doesn't seem to be a hardware problem. But from my user account I can't access the internet.
    All the Network settings look fine - no firewall, nothing looks out of place. I'm getting an IP address served by the modem, and Diagnostics even says it can connect to the ISP server just no dialog with the internet!!! It's bizzare. Tried ping from Terminal too, no go. I've repaired permissions, still no go. Only thing I haven't done is zap the PRAM.
    This is a direct connection to the modem via ethernet (I usually use a router but it's out of the equation now)
    There's something blocking the connection but I can't find out what.
    This happened after I swapped the network round so that my new Mac Pro would be the main internet machine (sharing the connection with other machines on my network). Previously I could connect to the G5 via the Mac Pro but that's no longer working, or rather it's REALLLLLY slow, it will eventually connect.
    The only thing I've done out of the ordinary is put the drive from the G5 inside the Mac Pro to transfer some of my files. I had used BatChmod to change permissions on some User folders so I could copy them, but I've repaired the premissions since.
    please HELP!!!!!!

    I solved my problem by installing a fresh system on a different drive and starting from that. My Mac can now connect - but starting up into the other system causes the same no-internet problem so I can only assume it is some OS corruption that caused it.
    Hope that helps someone.

  • Can't connect to Internet via Airport

    I have a PPPOE ISP account. Before upgrade to Lepoard, just fine. Now I can only connect to internet using cable via my router moderm. I cannot connect my wireless router.
    The wireless router will appear to be connected but it said self assigned IP. If I hardcode an IP eg. 192.168.11.2 to it. The Airport status will become connected but still cannot dial into my PPPOE account. An message no PPPOE service will appear. But if I plug in the LAN cable, everything work fine. Why this happen? My wireless router work fine with my Window XP and my Mac (before upgrade to Lepoard) What configuration should I change? I am an idot to networking. I have download all patch and has tried boot to safe mode etc.
    Anyone can help?

    By power downs do you mean Sleep?
    One thing that might work is to set the IP to Static in Network>Configure IPv4>DHCP with Manual Address.

  • How can I connect personal hotspot to use the internet from my phone on my laptop?

    I do not have internet at home and want to be able to connect using the personal hotspot on my phone. How do i do this??

    How much would be a month?
           From: Verizon Wireless Customer Support <[email protected]>
    To: kelly johnson <[email protected]>
    Sent: Wednesday, October 8, 2014 12:02 PM
    Subject:  - How can I connect personal hotspot to use the internet from my phone on my laptop?
    #yiv3595356488 img
    |  
    |
      | 
    A message from the Verizon Wireless Community
      |
    |   |
    How can I connect personal hotspot to use the internet from my phone on my laptop?
    created by Verizon Wireless Customer Support in iPhone 4S - View the full discussion                  Hello kmj65
    Thanks for replying. The plan you have it would be an additional charge to add the hotspot feature. It's not free with the Nationwide plan. You would need to add the feature online at www.verizonwireless.com/myverizon
    JoeL_VZW
    Follow us on Twitter @VZWSupport   Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community Start a new discussion in iPhone 4S by email or at Verizon Wireless Community
    | 
    | 
    © 2014 Verizon Wireless
    Verizon Wireless
    One Verizon Way
    Mail Code: 180WVB
    Basking Ridge, NJ 07920
    Not interested in these emails anymore, or want to change how often they come? Update your email preferences by visiting https://community.verizonwireless.com/user-preferences!input.jspa.
      |
    We respect your privacy. Please review our privacy policy for more information
    about click activity with Verizon Wireless and links included in this email.
      |
    | 
    |

  • IPhone 5 and 5c can't connect to Internet every 1 or 2 days with iOS 8.0.2

    After having upgraded my iPhone 5 and my wife's iPhone 5c to iOS 8.0.2, they both can't connect to Internet every 1 or 2 days.
    They can't connect via wifi neither via 3G.
    If I restart the devices they start to connect again.
    I tried to reset the network settings and also to restore the devices from scratch via iTunes like the Apple support suggested me,  but the issue still persists.
    I'm very frustrated also because I bought to my wife an iPhone telling her she wouldn't have had all the issues she used to have on a previous Samsung smartphone...
    Anyone has having the same issue?

    After the update, try resetting your cellular network settings on the phone. Make sure the airplane setting is correct and try shutting it on and off to see if that works.
    See if that helps.
    Good Luck!

  • 5 out of 6 devices can't connect to Internet

    Just to preface,  this was all working hours ago.
    airport express,  Mac book pro, ipad, boxee box and Western digital live Nas all can't connect to internet.
    my Samsung Galaxy s3 has no problems however.
    normally if I can't get an ip address I would just say the Internet is down from the isp. But because I've got one device where it's working fine gives me cause to think otherwise.
    Any ideas would be greatly appreciated.

    You want the device that is directly connected to the modem to furnish the PPPoE service.
    This is sounding like you had your Mac connected directly to your modem at one time, so in that type of setup, the PPPoE connection on the Mac would have been correct.
    But, since you have added the Time Capsule....and it is now the device that is directly connected to the modem.... the Time Capsule must be configured to provide the PPPoE connection service, not your Mac.
    Open AirPort Utility - Click Manual Setup
    Click the Internet icon
    Your settings should look like this:
    Connect Using = PPPoE   
    Account Name = Your user name with your ISP
    Password = Your password with the ISP
    Verify Password
    Service Name.....leave this area completely blank
    Connection = Always On
    Disconnect if Idle = Never
    Update to save settings and the TC will restart
    Either delete the PPPoE connection on your Mac, or if  you want to retain it in case you need to connect your Mac directly to the modem at some point in the future, make that connection inactive.
    If you are connecting an Ethernet cable from one of the LAN <-> ports on the TC to your Mac, you want the Ethernet connection to be active on your Mac. This should happen automatically if the PPPoE connection is inactive or has been deleted.
    Be sure to power cycle the entire network at this point. Power all devices down, or der is not important.
    Wait a moment or two, then start the modem and let it urn for a moment by itself
    Start the TC and wait for a green light
    Then start each device one at a time until the network is back up

Maybe you are looking for