H61M-E33 B3 - which BIOS version for i5-3570?

Hi
My motherboard is MSI H61M-E33 B3, I was using i3-2100 CPU, but a friend gave me his old i5-3750, which is far better. I updated my BIOS with Live Update before I swapped CPU's but I guess that my BIOS version is still wrong for this i5, because when I try to run my PC, it beeps 4 times and reset. So my question is, what is exact BIOS version I need for this CPU to work, and where can I download it? I would be really thankful for any help

Quote from: HenryW on 18-February-15, 08:03:41
Does it still work with the 13-2100? Did you clear CMOS after BIOS update?
Yes, and yes. Works perfectly with i3, and I've cleared CMOS, but it didn't help.
Quote from: Chike on 18-February-15, 08:06:21
Go to MB support page and check the compatibility list.
for the last 2 digits/letters, A=10, B=11, C=12 etc, so A2 will be 10.2
The problem is, on this page - http://www.msi.com/product/mb/H61ME33_B3.html#hero-overview - On the compatibility tab, my i5 is labeled as "7680vC0.zip" - so i guess BIOS version 12.0 - but on the downloads tab, I see only BIOS 12.3 and 12.2, and the next older one is 10.E :/ Should I download this 12.2 or 12.3 versions?
When I use my Live Update 6 program, with i3 CPU mounted, it tells me that my BIOS version is A.E0 and it is the latest one, and no need to update.
I'm really, really confused :P

Similar Messages

Which BIOS version for K9A Platinum with 4GB memory / GeForce GT430 ?

I was running 1.4 with 2GB (2x1) Kingston memory and the GT430, everything OK.
Then I replaced memory with 4GB (2x2) Corsair memory and XP hung during startup ... changing voltage (1.9 to 2.1) & timings (4-4-4-12) didn't help, so I decided to flash to BIOS 1.9. Bad idea, the video card wasn't found anymore ... running 1.4 again now.
Anyone here with a K9A and similar setup and a BIOS > 1.4 ??

Quote from: Goner on 13-February-11, 01:43:14
Yeah, I know the PSU isn't the best one around. But on the other hand so far it never caused problems ... I'll get a new one before trying to put in the Corsair 4GB memory.
But in this particular case the PSu is not the problem ; if the K9A board detects the GT430 with BIOS 1.4, but not with 1.8 and 1.9 it's not the PSU's fault, right ?
I read on another forum that someone had the same kind of problem with a K9A, BIOS 1.9 and a HD5870 videocard. He claims he got hold of a 1.10b1 BIOS that actually fixed the problem ...
Will try attached BIOS ...
Quote
Yeah, I know the PSU isn't the best one around. But on the other hand so far it never caused problems ...
This doesn't matter, it can explode in each moment in flames and to kill all other parts installed in your computer.
[if you are not around when this hapends, the fires can destroy your home place too..]
It's the matter of time this to hapends... This PSU is a time bomb like Q-TEC, Colorsit, Codegen, HiTech and other similar cheap no name junks..
Quote
I read on another forum that someone had the same kind of problem with a K9A, BIOS 1.9 and a HD5870 videocard. He claims he got hold of a 1.10b1 BIOS that actually fixed the problem ...
This is known as AB1[listed as aka A1 in the prevision post],
the attached one is AB2[A2], aka 1.10b2[newer than 1.10b1] which fix and issue with Nvidia VGA mention,
[+ some other unknown vga patch from A1]
so it could helps for your case too

Which is the latest BIOS version for Satellite L30-113 (PSL 33)?

Hi everyone,
Could someone please tell me which is the letest BIOS version for my laptop since I have never upgarde it?
Also how do I install it and how do I check what is my bios version now?
Thank you in advance

First of all the BIOS update is not necessary if your notebook functions correctly.
But back to your questions;
On the Toshiba European driver page you will find all available drivers and also the newest available BIOS. At this time it seems to be a 3.10-WIN version
How to find out the BIOS version?
This is very easy you have to access the BIOS and then you could see the BIOS version.
To access the BIOS you have to press the F2 button immediately after notebook was started.
Ciao

Where can I find an old BIOS version for X200

Hi,
I am running windows 7 build 7100 on an x200. After updating to BIOS Version 3.05 - 3.06 the system is significant slower. Where can I find the former BIOS version for download?
In advance thx a lot for support.

Hi wolfgang285, and welcome to the Lenovo User Community!
All the BIOS versions which have been released on the web are on the X200 BIOS update page.
I don't work for Lenovo. I'm a crazy volunteer!

Latest BIOS version for GT60 0NC

HI
i was wondering which bios version is the latest for my notebook. i have heard that i need the latest version of BIOS to use Dolby Digital Live on my realtek audio manager.
my current version is E16F13IMS.30

Quote from: huy1902 on 31-May-13, 02:23:12
HI
i was wondering which bios version is the latest for my notebook. i have heard that i need the latest version of BIOS to use Dolby Digital Live on my realtek audio manager.
my current version is E16F13IMS.30
The dolby digital live on the GT60/GT70 is pretty much crap. It only works with 'streams' that actually output it in dolby digital, an will not up-convert audio (ie MP3's and stereo sound) to dolby digital output. It's a very crappy implementation, to be perfectly honest about it.
If you want a GOOD sound card to output dolby digital audio, I would suggest considering an Asus Xonar U3. They run around $50USD, and will upconvert and will work great with this notebook. It's what I'm currently using.
Otherwise, the ONLY way to output dolby digital is to get a TOSLINK adapter (goes from a optical stereo connector to a normal optical connector). While they aren't expensive, they still won't get you good sound output from the laptop. I tried it, and went with the Asus Xonar U3 instead.
It really doesn't have anything to do with the sound card, it's not defective. It's just that is all that it can actually do. There are very few, almost none, out there that can actually upconvert. The Asus Xonar sound cards are one of the few that can.

BIOS upgrade for MS6156 which BIOS version do i have?

Hi Guys,
i've got to upgrade my BIOS i think after reading these forums. I have a MS6156BX7 V2.1 motherboard. When i boot, i see W61562XMS V1.5 31400. I also see Award BIOS V1.0.
Can anyone tell me which is the BIOS version that i have? Is it 1.5 or 1.0? Also can you direct me to the correct one as i can't afford to screw this up, important info on the HD.
Another problem is that i have an NTFS boot partition. Do i flash the BIOS the same way?
cheers
Spawny

http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=259&kind=1
http://www.msi.com.tw/html/support/bios/note/ntfs.htm

NEW BIOS version for Satellite A200 PSAEC!

They've posted new Bios updates on the download page!
5.20-WIN : This Bios is NOT compatible for Notebooks with Windows Vista!!!
1.80-WIN : This Bios is ONLY compatible for Notebooks with Windows Vista!!!
But I don't really know how to use this. Because I have currently XP installed. Let's assume I update the bios with the XP version. What if I decide later to put back the Vista? That would be impossible, because I have BIOS for XP. And couldn't install the Vista BIOS neither, as i have XP installed...
Any ideas?

Hi,
its not so tragically if you have a XP bios and vista installed. It will work but with many limitations and it wont work stable, so its better to have the version which is intended for the operating system you currently use.
Thanks for posting this news, I assume that many uses with that machine appreciate some good news. :)
Greets

Worried about bios version for L855D-S5117

My bios indicate a version 6.4, yet toshiba support indicated that for my computer the latest is version6.2. Version 6.4, at least the toshiba support page indicates is for model l845.
Is there something wrong here? I ask this because, I cannot seem to boot from an external hdd (usb connected). This is a linux distro, and the first message I get is something about cannot find efi. Same is true when I insert a live cd (with fedora 19).
I tried to update the bios,with the 6.2 version but it would not do it since the bios version loaded is 6.4.
Any advice is appreciated.

Hi Week ends are some times slow on replies. I have no life so I hang around here to much. I'm not sure how much help I'll be, but will give it a shot. I'm sure you know you have to have the boot order set to boot from USB as the first choice. The USB must have a working OS installed on it. I have a seagate 1TB hard drive that I use to put my back up images on and other things. I have a 16GB flash that I have Toshiba recovery media on.If I try to restore with the 16GB USB while the 1TB is plugged in, it refuses to boot because there is no operating system on the 1TB and it won't boot. If I unplug the 1TB and plug in the 16GB USB, it recognizes the USB and will boot to it because it has a OS on it. Having said all this and which you probably already knew, I suggest you go to the Linux forum and ask them what your doing wrong. You will get better replies during the week.
Dokie!!
PS This is what Microsoft has to say, which is over my head.
http://support.microsoft.com/kb/315943
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture48.JPG ‏204 KB

Anymore BIOS Version for CQ40-314TU

I have an HP Compaq CQ40-314TU and it is using the BIOS version F11C to install Windows XP (Originally, it used a BIOS version which I didn't know to install Vista). Unfortunately, when I turned it on and used Dxdiag to view the system properties, It showed that the RAM were 986 Mbs (I installed 2x512 MB sticks) due to onboard Intel VGA, I think. When there is Kaspersky Antivirus installed, the startup process costs 4 minutes and there is NO option to adjust the onboard VGA. Is there any other BIOS Version that I can use to replace the current one? I know for sure that there will be somone in this forum tells me that I should turn off any unnecessary service or program that interfere with the startup process. I have tried all of these but it is useless to do so. Thanks all

WinFlash for HP Notebook System BIOS - Microsoft Windows-Based
I guess it means it was specifically created to run alongside Windows...
altough it says on the underlying description:
Description:
This package contains the WinFlash Utility and a System BIOS image for the supported notebook/laptop models and operating systems. The WinFlash Utility is used to locally flash the System BIOS (ROM) on notebooks/laptops operating in a Microsoft Windows Vista Operating System environment.
and it does only says Vista... I would not recommend doing it on XP... not unless you have got Vista right now, flashed the BIOS then downgrade back to XP... which would be a lot complicated and long process that you are to take...

Manadatory SP stack and which kernel version for source Release 4.6c

Hello!
I have the following questions:
- Which support package stack and which kernel version are mandatory for Source Release 4.6?
- Has the SAP Business connector still any supports?
And some additional question regardind connection Lotus Notes with ERP 2005:
- What is the procedure to connect Lotus Notes and ERP 2005 (Do we need RFC-connects or RFC/BAPI?)
Can anyone help out or recommend how to proceed?
Thank you!
Regards
Axel

First I would like to recommend getting a good basis consultant to do that whole process. If you have never done such kind of big technical upgrade/conversion before it can become a totally frustrating experience.
> Do you all do Unicode Conversion first before going for upgrade process ?
4.6c is not available as Unicode. During the PREPARE programs/transactions will be imported to the 4.6c system where you have to run all the preprocessing step mentioned in the Unicode conversion guide. After that is finished, the system is upgraded and immediately after the exported and to be imported as a Unicode system.
Anyone have experience in doing CUUC to EHP4 under single upgrade ? My colleagues have upgraded 4.6C -> ERP 6.0 for EHP 1 only and we want to perform EHP4 and Unicode Conversion under single project. Appreciate anyone advice on this.
There are many many things to look after, too much to list here in a forum. As suggested I'd consider getting a basis consultant with experience in that area.
Markus

Do someone have the 14cn39WW bios version for S10?

In the forum, I have heard that S10 has the newest bios version --14cn39WW and this version is said to making the Fan quiet.
but I can't find it on the official site of Lenovo.Can someone upload it in the forum ?
Thanks a lot.
The way how to back up the bios :
Install the 14cn38WW.exe which can be download from the Lenovo side. then run the winPhlalsh.exe ,choose the button "backup bios only"....
Message Edited by phayds on 02-07-2009 06:57 AM

Hi phayds,
I'm not sure about 14cn39ww, but there is 14cn38w on consumersupport.lenovo.com:
http://consumersupport.lenovo.com/en/DriversDownloads/drivers_show_239.html
One note - Internet search on partial symbol seqs gives sometimes unbeleivable results!

Which Excel version for SEM-BPS 4.0?

Hello! Anyone knows which Excel version works best or is minimum requirement for SEM-BPS4.0 (together with BW3.5). The intended use is Excel planning within SAP GUI.
Thanks,
Auvo Ahola

At least Excel 2000.
Regards

Minimum bios version for neo2 platinium+venice core?

What is the oldest bios version that the neo2 require to post with a a64 venice core?

Quote from: skippy9146 on 13-June-05, 20:42:46
That'll get the job done!
May have to order a Venice REAL soon....!
I had the worst Winchester ever - 3500+, 0437 VPMW, batch#0015, and it couldn't get out of it's own way. It needed 1.52v just for a 200Mhz OC - pathetic. Highest benchable speed was about 2675Mhz, with 1.68v...After getting frustrated enough to do something about, I decided on the 3000+ Venice. All I can say is this &%@#!!* thing is fast! I didn't think I was in for this big of a boost, but I can ride this puppy to 2500Mhz with stock vcore of 1.35 and take it to 2750Mhz totally Prime stable with 1.552v. The dfference is incredible, and not just in benchmarks and games- it just feels faster all around. I was lucky and got a decent OC'er, and the Neo2 helps too

MSI H61M-E33(B3) updating bios.........file not found

Hi,
I tried to update the bios MSI H61M-E33(B3) from 10.D to 12.2. After rebooting, i got the message "BIOS Update: ... file not found".
There is something wrong, what could it be?
The following files are on an usb-Stick:
- 7680vC2.exe (Windows-Installer)
- EIVB.bin (MD5: 55a1af369b1db5b180a432a8fa5c7178 )
- IM9T318R (empty directory)
If the stick is missing, i got the message that the bios-update is not finished yet.

If that doesn't work:
>>Use the MSI HQ Forum USB flasher<<
Download the attached archive to your desktop(of any computer)
Install the forum update tool
Use option 1 of the tool and point it at the entire archive.
It will prepare the flash tool to flash, I am not sure if you are getting far enough to use this, perhap try a full cmos clear as well.
If none of these solutions will work, you will need that spi programmer.

Old BIOS version for 945PL Neo (MS-7236 v2.x)

Older BIOS files for this board 945PL Neo are not available for download on the website, it's all done through the updater program. When the bios is upgraded it does not save the old bios for backup, I found out.
I need to downgrade the BIOS to the board's shipping version. I unfortunately updated the BIOS to I think it was 5.2 and I need version 5.0. Upgrading the BIOS screwed up a license key for an application I'm running. I couldn't have planned a better disaster.
Anyone?
Thank you.

EDIT: i see now
Quote
DOS sound: This driver supports DOS sound for VIA VT82C686A/VT82C686B/VT8231 southbridges only. The VIAAUDIO.COM file mentioned in the Readme concerning DOS sound can be obtained from this old audio driver package. It is no longer supplied in the Vinyl_AudioCodec driver package.

H61M-E33 B3 - which BIOS version for i5-3570?

Similar Messages

Maybe you are looking for