H61M-E33 problem

hello all , i want to ask :
1. why my system always stuck in winXP loading screen and i can't install win 7 ?
2. in device manager there are other high defenition audio device in other device section and i can't install it.
my rig's
1. Corsair cx 430 w v2
2. MSI H61m-E33 (B3)
3. MSI GTS N450 1Gb 128 bit DDR5 cyclone
4. Team Elite 2x2 Gb PC 10600 , 1333 mHZ
5. WD Caviar Blue 500 Gb
6. Core i5 2300 @2,8 ghz sandy bridge
Please anyone can help me :(
sorry for my bad english

Quote
i can't install win 7
What happens if you try?
Also, what is your current BIOS Version?

Similar Messages

H61M-E33 and AHCI

Hello,
I recently grabbed one of the MSi H61M-E33 mainboards from the Microcenter deal a few days back. Despite the information I see online, and in the board's user manual, it doesn't appear to have AHCI support. Does anyone know if MSi is looking into this? I gave them a call, but they just had me update the BIOS, which did nothing.
In UEFI, it even describes each of the settings like AHCI was supposed to be an option, but it's just not there. It doesn't look like I'm alone, either. I see a couple mentions of this around the internet, but I didn't see anything here so I thought I'd ask.
Thanks!

Quote from: HU16E on 29-March-11, 06:12:44
Might be some information concerning that in this thread; https://forum-en.msi.com/index.php?topic=146755.0
Interesting. I didn't see that thread because it's on a different board. So two of MSi's H61 boards are exhibiting this problem. I do see they share the same firmware, and looking around online there are rumors that H61MU-E35 has a UEFI update on the way to fix the issue.
Hopefully this gets corrected soon.

H61M-E33 B3 - which BIOS version for i5-3570?

Hi
My motherboard is MSI H61M-E33 B3, I was using i3-2100 CPU, but a friend gave me his old i5-3750, which is far better. I updated my BIOS with Live Update before I swapped CPU's but I guess that my BIOS version is still wrong for this i5, because when I try to run my PC, it beeps 4 times and reset. So my question is, what is exact BIOS version I need for this CPU to work, and where can I download it? I would be really thankful for any help

Quote from: HenryW on 18-February-15, 08:03:41
Does it still work with the 13-2100? Did you clear CMOS after BIOS update?
Yes, and yes. Works perfectly with i3, and I've cleared CMOS, but it didn't help.
Quote from: Chike on 18-February-15, 08:06:21
Go to MB support page and check the compatibility list.
for the last 2 digits/letters, A=10, B=11, C=12 etc, so A2 will be 10.2
The problem is, on this page - http://www.msi.com/product/mb/H61ME33_B3.html#hero-overview - On the compatibility tab, my i5 is labeled as "7680vC0.zip" - so i guess BIOS version 12.0 - but on the downloads tab, I see only BIOS 12.3 and 12.2, and the next older one is 10.E :/ Should I download this 12.2 or 12.3 versions?
When I use my Live Update 6 program, with i3 CPU mounted, it tells me that my BIOS version is A.E0 and it is the latest one, and no need to update.
I'm really, really confused :P

H61M-E33 (B3) BIOS update?

Hi guys,
I've just got hold of a GTX760 graphics card, but having a spot of bother with the fan not powering up as it should--it's been tried in another system and all is well so it's been suggested that I need a BIOS update for my own machine.
Is this correct, and if so which one?
System comprises of:
H61M-E33 motherboard
i5-2500K CPU
8 GB Kingston value RAM, 1333MHz (2x4GB modules as a pair)
850W XFX PSU
Thanks in advance for any help!

Sorry for the delay in replying chaps, things went a bit haywire at work.
Thanks for the BIOS link and instructions Svet; this updated well but unfortunately didn't resolve the issue--which now seems to NOT be a BIOS one anyway!
Chika; the problem is/was that the fan on the graphics card would only 'kick in' (if at all) when the card was already too hot, resulting in the system freezing. A friend from a few houses away offered to test the card in his system, I know he has a 970GPU but not what the CPU etc is, but his testing was actually flawed as I'd given him the impression that I could get no output at all from the card. All he did was try it, saw a decent image on his screen and concluded that the card was OK and that it could need the motherboard BIOS updating as he'd had to do this on his machine.
The cooling afforded by my case seems to have been sufficient to keep the temperatures within the safe zone for *normal* uses, but not for anything such as playing a game to put the card under stress.
Whilst all this was happening I'd contacted the cards manufacturer who replied saying that it shouldn't need a BIOS revision and that the card itself was most likely faulty and started the RMA procedure.
So, thanks for all the help and sorry for leading you off on the wrong track.

H61M-E33 B3 - PCI slot not working ?

Hi,
I've plugged a working (tested on another PC) WIFI DLINK PCI card on the motherboard (H61M-E33 B3) and it's not detected by windows 7 64bits or by the PC itself (the on card green LED isn't lightening).
I've updated to the latest version of the motherboard BIOS with Live5.
Except that, the PC is working fine.
I've an Intel icore3 and 8gb of ddr3 ram.
Anyone ever had this kind of problem ?
Thx

Quote from: HU16E on 11-December-11, 18:36:24
Most likely a compatibility problem. Might check with the card manufacturer for any update information. Other suggestion is to contact MSI Tech Support with a ticket reporting the problem. They may be able to look at it from their end. http://support.msi.com
I'll try that, thx.
The PCI card is a DLINK DWA-547 wifi card, in case you ever read problem about this one.

H61M-E33/W8 won't boot

I just installed a brand new H61M-E33/W8 motherboard, Intel i3 processor, new 600W power supply, and 8 GB of memory. Put everything together just fine and it booted to the system bios with no problems. Shut down and installed my hard drive then re-booted. Again, no problems and the it appeared to be booting just fine. Then the system suddenly shut off and now will not boot at all. When I hit the power button the fan turns for a few seconds and stops. Any ideas?

First try a full cmos clear: >>Clear CMOS Guide<<
IF no help remove non essential hardware and try to boot with a single stick of ram. Test each stick and each DIMM like this.

H61M-E33 won't post with SATA controller installed

I'm having trouble with using a specific PCIe x1 SATA controller with my H61M-E33.
This board has three PCIe slots, and I'm trying to use three PCIe x1 SATA controller cards. Two cards are based upon the SiL 3132 chipset, and work perfectly. The JMicron JMB363 chipset card is the problem.
If I insert the JMB363 card into any slot, the board will refuse to even post. It sits there for a few seconds, then power cycles. It will do this over and over until you pull the switch off the power supply. It will do this if inserted into any slot on the board, and even if no other cards are installed.
This card works perfectly in another machine. It appears there is some kind of conflict between this card's chipset and the motherboard.
I'm running the latest beta firmware that's available (A41), but I had this same problem on the shipping firmware (A20). Is there anything I can do to try to figure out what is going on?

Quote
The JMicron JMB363 chipset card is the problem.
Recommend to contact both MSI Tech Support with a ticket, & it may also be a good idea to contact the card manufacturer & see what they have to say as well. It is rather apparent it is a compatibility conflict of some kind since the other two cards work fine.

MSI H61M-E33(B3) updating bios.........file not found

Hi,
I tried to update the bios MSI H61M-E33(B3) from 10.D to 12.2. After rebooting, i got the message "BIOS Update: ... file not found".
There is something wrong, what could it be?
The following files are on an usb-Stick:
- 7680vC2.exe (Windows-Installer)
- EIVB.bin (MD5: 55a1af369b1db5b180a432a8fa5c7178 )
- IM9T318R (empty directory)
If the stick is missing, i got the message that the bios-update is not finished yet.

If that doesn't work:
>>Use the MSI HQ Forum USB flasher<<
Download the attached archive to your desktop(of any computer)
Install the forum update tool
Use option 1 of the tool and point it at the entire archive.
It will prepare the flash tool to flash, I am not sure if you are getting far enough to use this, perhap try a full cmos clear as well.
If none of these solutions will work, you will need that spi programmer.

H61M-E33 (B3) BIOS supported HD size?

How large of an HD does the BIOS of H61M-E33 recognize? I put in a 3 TB drive and am trying to run SpinRite on it but the motherboard might not be recognizing all 3 TB, unfortunately.
There is no POST screen that I can find nor is the drive size shown in the BIOS setup screen.
Thank you!

Then the board is bricked. If still under warranty rma it otherwise recovering with an SPI flash programmer is required by a pc shop or MSI (to be paid of course).

H61M-E33 (B3) BIOS 12.1 Help Please

Hello,
I am having the "file not found" bios update issue.
I tried the solution found on the forum as indicated by Svet but I have lost the original Bios Files that were extracted during the update.
If anyone is willing to help me and has a similar Motherboard i will post the instructions:
1) Download the 7680vC1.zip archive from http://eu.msi.com/product/mb/H61M-E33--B3-.html#/?div=BIOS
2) Extract it to an clean USB stick
3) Run it but DO NOT continue the instalation, dont close it either.
4) Acces the USB stick with explorer and copy all its content to an outside folder
5) Cancel the update.
Now all i need is that folder. Unfortunately I can't do the above myself, as the current computer doesn't have an msi compatible board and the application refuses to run.
Note: When the file 7680vC1.exe is runned, a temp folder is created on the stick. That folder is deleted after the update procedure is aborted.
Or any ideas on how to bypass motherboard check?

Why do/did you want to flash the BIOS ? Did you purchase an Ivy CPU with this board ? If so, then you firstly need a supported SB CPU to be able to flash.
What does your system consist of ? >>Posting Guide<<

H61m-e33(b3) bios update fail

hello i have a msi h61m-e33(b3) and i have update my bios to the last Verse 12.3.
but i remove the USB pen drive before ME update successful.
now my PC reboot all the time.
what can i do NOW to get my PC running??

Then the board is bricked. If still under warranty rma it otherwise recovering with an SPI flash programmer is required by a pc shop or MSI (to be paid of course).

BETA-Releases for H61MU-E35, H61M-E33, H61M-E23 & H61M-P33 [MS-7680 v2.0/2.1]

I will upload the latest BETA-UEFI-Release(s) for the E7680IMS.Axx-Release Series [v10.xx] here. These Releases are for the following mainboard models only [MS-7680 PCB v2.0 / v2.1 -> ERP 030, 040, 060 and 070]:
- H61MU-E35
- H61M-E33
- H61M-E23
- H61M-P33
The latest release is E7680IMS.A41 [=v10.4b1].
Changelog:
E7680IMS.A30 ---> E7680IMS.A41
- Add LowMemory Support.
- Add AHCI Support.
---> Modify Remove SATA PORT3/4 to Hidden SATA PORT3/4.
---> Remove check Bom For USB3.0 varstore to Chipset.vfr.
---> Add Check Hot Plug Port1/port2 For H61M-P33.
- "H/W Monitor" to "Hardware Monitor"
- Add "Intel VT-D Tech" in OC\CPU Features page
- Correct disable USB Controller cannot into S3/S4.
- Patch the ATI 6xxx VGA card installing VGA driver after the OS halted.
- Fixed When installing 3TB HDD and then press F11 to select UEFI DVD, the system will hang in blank screen.
- Fixed MFLASH in setup recovery Fail.
As always, use this release at your own risk!
>>Use the MSI HQ Forum USB flasher<< [Method II] for safer flashing and best results.

Quote
Will this work on the H61M-P23
No! The H61M-P23 uses E7680IMS.Hxx releases. Please consult the following thread for BETA releases for the H61M-P23:
https://forum-en.msi.com/index.php?topic=147964.0
Back to topic [H61MU-E35, H61M-E33, H61M-E23 & H61M-P33 BETA [MS-7680 v2.0/2.1]:
Update: E7680IMS.A53 [v10.5b3]
E7680IMS.A40 ---> E7680IMS.A53
- Add VGA Share Memory Option Name "256M/512M/1024M"
- Add SYS Smart FAN Function for PCB2.1.
- Adjust USB3.0 SMI GPI 11 to 14 for PCB2.1
- Remove "USB 3.0 Legacy Mode Support" for some BOM(No USB 3.0 Port)
- Remove VGA Share Memory Option Name "256M/512M/1024M" for ECN
- Fix plug 4 dimm G-Skill F3-12800CL7D boot fail when XMP enabled
- Temporarily closed SmiVariable Function for M-Flash Boot Issue.
>>Use the MSI HQ Forum USB flasher<<, Method II for best results.
Use this release at your own risk!

H61M-E33/E23/P33 (B3), H61MU-E35 (B3) H61M-E23 (G3) [E7680IMS.Cxx]

7680IMS.C30OFFICIAL FULL RELEASE
- Update CPU Micro Code.
- Update onboard Realtek LAN driver.
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
This is the full release bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<Intel Downloads / Management Engine>>
Please note that flashing this release occurs entirely at your own risk!

Quote
Will this work on the H61M-P23
No! The H61M-P23 uses E7680IMS.Hxx releases. Please consult the following thread for BETA releases for the H61M-P23:
https://forum-en.msi.com/index.php?topic=147964.0
Back to topic [H61MU-E35, H61M-E33, H61M-E23 & H61M-P33 BETA [MS-7680 v2.0/2.1]:
Update: E7680IMS.A53 [v10.5b3]
E7680IMS.A40 ---> E7680IMS.A53
- Add VGA Share Memory Option Name "256M/512M/1024M"
- Add SYS Smart FAN Function for PCB2.1.
- Adjust USB3.0 SMI GPI 11 to 14 for PCB2.1
- Remove "USB 3.0 Legacy Mode Support" for some BOM(No USB 3.0 Port)
- Remove VGA Share Memory Option Name "256M/512M/1024M" for ECN
- Fix plug 4 dimm G-Skill F3-12800CL7D boot fail when XMP enabled
- Temporarily closed SmiVariable Function for M-Flash Boot Issue.
>>Use the MSI HQ Forum USB flasher<<, Method II for best results.
Use this release at your own risk!

MSI H61M-E33 B3

I search informations about this model and find nothing on msi sites
http://us.msi.com/index.php?func=prodpage2&maincat_no=1&cat2_no=170&cat3_no=744
I want to know:
the detailled dimensions to estimate if it will fit a msi GTX560 twin frozr and a creatvie xfi xtrem gamer sound card
compatibilty with corsair xms3 2*2go PC3-10666
intel i5 2400 with a noctua nhu12p (no details on noctua site )
seasonic x 460fl
Im french can anyone tell my more here , or should i email support
Thanks

I buy this motherboard but i have a bug
With the origin bios configuration , the supply phase around the cpu produce a buzzing sound , the sound is different with the cpu load
After deactivating in the bios the " Intel dynamic power technology " and the "C1E" in bios,sound disappears
This bug is already known? Or there is defective capacitors ?
So my i5 2500k tension is always 1.236volts and impossible to change it in the bios or with the control center
My configuration :
Carte Mère : MSI H61M-E33 (MS-7680)
Fabricant :   American Megatrends Inc.
Version :   V10.3
Date :   03/07/2011
Adresse :   4096Ko
Motherboard ID :   63-0100-000001-00101111-030211-Chipset-1AOQI015
DMI Version :   2.7
Intel Core i5 2500K @ 3400MHz ratio 34
Mémoire physique : 4096Mo (1 x 4096 DDR3-SDRAM )
Informations SPD EEPROM (A1_DIMM0) :
Fabricant :   Corsair
Part Number :   CMV4GX3M1A1333C9
Numéro de série :   0018D6EC52A51018
Intel(R) HD Graphics Family
SAMSUNG HD103SI ATA Device (1000Go)
Western Digital WD5000AACS-00ZUB0 ATA Device (500Go)
PIONEER DVD-RW DVR-215D
Realtek Semiconductor RTL8168/8111 PCIe Gigabit Ethernet Adapter
Windows 7 Ultimate Professionnel 6.01.7601 Service Pack 1 (64bits)
DirectX : Version 11.00
Windows Performance Index : 4.8 sur 7.9

H61M-P23 problems

I bought a 'barebones' kit from TigerDirect.
H61M-P23
Intel I3-2100
Corsair XMS3 4GB - 1 stick
Seagate 1TB
Asus dvd
Thermaltake V2 with 450w power supply
I'm having problems getting it to boot for first time
Where does the little speaker plug in on the MB? I need to hear some beeps.
As soon as I add the memory stick the power supply dies. Even if its just the cpu and memory. Tried both slots. I can run cpu, disk and dvd but not memory.
Any help appreciated

Quote
Where does the little speaker plug in on the MB?
JFP2, should show in the manual. Try with a more powerfull single rail +12V PSU.

H61M-E33 problem

Similar Messages

Maybe you are looking for