H61M-P21 (B3)Updating Bios File not found

Tried to up date my H61M-P21(B3) Motherboard using the 7680vJ0.exe file on a usb stick from the MSI web site Version 19.0 Failed to update now can not get in to bios setup and just get a message.. Updating BIOS..................File not found
Can some one send me a link to the file I need to put on the usb stick? or email me the file please? All I have on the sitck at the moment is EIVB.BIN 7680vJ0.exe and a folder called XPELXR2X that is empty.Or do I have to rename the EIVB.BIN to somthing?
Cant acess the biose menu or the boot device menu so Im stuck any help would be very much appreciated...sorry think I posted this in the wrong section before
Thanks Tony

Quote from: oztony on 23-June-12, 16:13:57
Ok formated with hp tool put the 7680vJ0.exe and got updating bios .......bios file not found! no dos prompt if I could get to the dos prompt I thin I could flash maualy with FUDE238.EXE
Yup. That would probably work. I don't know. Not sounding good. Is there a reasonable priced pc shop in your area that has an SPI flash programming device that could flash the chip for you?

Similar Messages

H61I-E35 (B3) :BIOS Updating ________ File not Found

Hello.
Yesterday I was flashing my BIOS from Version 5.2 to Version 6.0.
I have downloaded 7677v60.zip file, extracted it to F:\7677v60\E7677v60 (my usb stick)
I have used front USB port.
I have launched E7677v60.exe from F:\7677v60\E7677v60 folder and wait installation to complete. There were notification (Do not unplug your USB stick)
Windows where restarted, then computer started and after some time (approximately 5 - 7 seconds) computer restarted.
After second start, I have a message: BIOS Updating ________________ File not found.
I have tried to shutdown, put my usb stick in rear ports, but it make nothing.
So, please help, how to Update or How to recover my BIOS on motherboard?
And, why this appeared ( I don't unplugged my USB stick all the time of setup and restart)?

Quote from: Freaker on 01-June-12, 16:12:20
Hello.
Yesterday I was flashing my BIOS from Version 5.2 to Version 6.0.
I have downloaded 7677v60.zip file, extracted it to F:\7677v60\E7677v60 (my usb stick)
I have used front USB port.
I have launched E7677v60.exe from F:\7677v60\E7677v60 folder and wait installation to complete. There were notification (Do not unplug your USB stick)
Windows where restarted, then computer started and after some time (approximately 5 - 7 seconds) computer restarted.
After second start, I have a message: BIOS Updating ________________ File not found.
I have tried to shutdown, put my usb stick in rear ports, but it make nothing.
So, please help, how to Update or How to recover my BIOS on motherboard?
And, why this appeared ( I don't unplugged my USB stick all the time of setup and restart)?
is similar, but the model I have H61M-P21 (B3)
have a file on a flash drive "biosEIVB.BIN" of about 4 MB, but still receive the message "File not found"
Help me please

Z68A-GD55 (G3) bios file not found on usb

I've tried updating the bios to p8 and the pc got stuck in a boot loop.
Thinking the mobo was dead and buried I deleted all the bios files from the usb. After many cmos resets tghe computer has come back to life and is now asking for me to insert the usb stick.
My question is, can anyone please help with the missing files.
Also, I'm running a 2500k i5, I know now that I should not have done the update...

Hi,
Thanks for the quick reply. I maged to solve the problem, but here is more detail incase it helps others in a similar situation.
What happened is, I tried to update the bios in windows and the software did it's thing until it came to restarting before completing the bios update. At that point the PC was stuck in a constant boot loop with nothing showing on the monitor.
I tried removing battery, the ram etc and after a about 20 tried over 2 days, it suddenly showed up with a red screen asking for the usb stick to complete the ME 8 (?) update.
To get the missing files back, I redownloaded the bios from msi website, and opened the exe file using winrar. There was a complaint of corrupt archive but I was able to extract out all the files onto a usb stick.
This didn't fix the problem, then I renamed the BIN file to E7681IMS.P80 and it worked...the bios update finished.

SPA504g provisioning, firmare update failure, file not found.

Hello all,
I am provisioning SPA504g phones using a tftp server and it works well, however there is something that annoys me. I have the phones doing firmware updates with the update rule: tftp://sip.XXXXXXXXX.net/Cisco/spa$PSN/Firmware/from-$SWVER/spa$PSN.bin and they do come in and attempt to collect that file however when they are up to date (as they are all now on 7.5.5b) and therefore there is no file for them to collect, the phone considers this to be an upgrade failure and so it retries after the "Upgrade Error Retry Delay" time (default 2 mins) instead of just considering this to be no upgrade available. This means every 2 mins the screen flashes the UPGRADING FIRMWARE message briefly.
I could just raise that timeout to a day, but I is there a better way of fixing this?
Kevin

As long as you configured the firmware URL, you are claiming there IS firmware available.
So, either
1. make firmware to be available. Even it is the same version. Phone will fetch it one time, it will recognize it's the same, then will not fetch it again as long as the firmware URL will not change.
2. it's nice trick to use $SWVER in URL. Use the similar trick even for the profile URL. Make sure the Upgrade Enable is set to "No" if phone run newest firmware. You may extract Upgrade Enable option to be only option in Profile Rule B file so the $SWVER bias will apply to Profile Rule B only.
I is there a better way of fixing this
Yes, in my humble opinion. Use HTTP server instead of TFTP. Even simple PHP script will allow you to make not only upgrade logic, but more complex magic according yours wishes. You may mix tftp configuration with http style configuration as well - there are four independent profile rule options configurable. Just be careful, particular option could not be in two or more profiles.
Mark thread as answered if it answered your question. It will help others to found solutions.

Qosmio X70-A-12 and new BIOS - FILE NOT FOUND

ifi would to download the brandnew BIOS driver (20/12/2013 - 1.40 WIN) i get an 404 !!!
http://www.toshiba.at/innovation/download_bios.jsp?service=AT
Thx for fixing that SOON
Qosmio X70-A-12

how long must we wait?
it is simply not acceptable that you are selling gaming notebooks, which you can not play because you have to have the fear start to burn them!!
finally brings a bios driver out cools this whole s***.
your support is very very bad.
if you have a problem you will be redirected to the forum where nobody helps or granted only s***** advices.
or you should call the expensive special phone number for 1 per minute but please.
I have a qosmio x70 a12, which has cost me nearly 2000 .
I can think for this amount of money you expect service and not dead left (bios 404) or during the day no download limit.
I'm almost compelled, the system cpu to throttle 100mV does not run out of laptop due to overheating. and in battlefield bad company 2 from the year 2010!

PH61A-P35 (B3) bios update..........file not found

Hello, ihave problem. I tried to update BIOS, so download bios file, unzip to flash drive, execute bios file on flash drive, and after only wait and system restart. But when he started i can read only red inscription "BIOS Updating ________________ File not found."
Is here any chance to recovery old bios or even bios update?
Please help me, i am very disappointed :(
thanks very much.

Recommend to give the forum's USB method a try;
>> Forum USB Method <<

PCD 10.5 upgrade Task Unified CM Upgrade file not found

Hi,
I have upgraded PCD from 10.0.1 to 10.5.1.10000-6.
Now i want to config na upgrade task to upgrade CUCM 10.0.1 to CUCM UCSInstall_UCOS_10.5.1.11901-1.sgn.iso but when i do browse in task for
Unified CM Upgrade it appear after some seconds popup window saying The Page cannot be updated. Files not Found.
But if i go to PCD SFTP Datastore menu i can see file is there in upgrade folder also i have tried with a firmware file for exemple and problema is the same.
Regards.
MC

Hi Manish , thanks for the reply
So I switched back to 8.6.2SU2 and then re ran the Upgrade.Switched back to 10.5 and waited.It took about 30 mins but eventually everything came up.Rebooted again to check , and it came up much quicker so that seems to be the way it is.
"Did you take a backup of the newly upgraded 10.5 and then edit its hardware settings followed by a restore?"
Glad you bought this up as I understand that the reason behind this is to align the partitions.I checked my 8.6.2 before istarted the upgraded, using the TAC approved method which said they were aligned
After the upgrade 10.5 reported the partitions aligned.The OVA readme talks about changing the OS NIC etc , which I did .Are there other reasons why I would now need to do a back and restore ? if my partitions are aligned?

MSI H61M-E33(B3) updating bios.........file not found

Hi,
I tried to update the bios MSI H61M-E33(B3) from 10.D to 12.2. After rebooting, i got the message "BIOS Update: ... file not found".
There is something wrong, what could it be?
The following files are on an usb-Stick:
- 7680vC2.exe (Windows-Installer)
- EIVB.bin (MD5: 55a1af369b1db5b180a432a8fa5c7178 )
- IM9T318R (empty directory)
If the stick is missing, i got the message that the bios-update is not finished yet.

If that doesn't work:
>>Use the MSI HQ Forum USB flasher<<
Download the attached archive to your desktop(of any computer)
Install the forum update tool
Use option 1 of the tool and point it at the entire archive.
It will prepare the flash tool to flash, I am not sure if you are getting far enough to use this, perhap try a full cmos clear as well.
If none of these solutions will work, you will need that spi programmer.

H61M-P23 (B3) Bios update file not found

Hi everyone,
I tried to update my bios from version 17 to 19 so I have downloaded the bios file from here fr.msi.com/product/mb/H61M-P23--B3-.html#/?div=BIOS
I plugged my USB stick and moved the .exe downloaded previously into the root of my USB Key. I ran the file then my PC restarted and now I get this message "Bios updating... File not found"
What should I do ? I can't access to the BIOS anymore, I tried a clear cmos but it's the same issue I also tried to insert the CD ROM of MSI but I can't boot from it.
Thanks for you help

Quote from: dragoszdc on 09-July-12, 21:53:18
Hello,
I am having the same problem, but with the H61M-E33(B3) MB. Can anyone help me with that?
https://forum-en.msi.com/index.php?topic=159961.msg1172755#msg1172755

H61MU-E35 (B3) Updating BIOS....File Not Found Error

I have MSI H61MU-E35 (B3) Motherboard with Intel i3 CPU.
I downloaded latest BIOS File 7680vC3.zip (on web page it's says Version: 12.3 from -> -www.msi.com/support/mb/H61MUE35_B3.html#down-bios
Using Windows XP OS From 7680vC3.zip => Extracted E7680vC3.exe => Placed on USB Drive (I did not format USB Pendrive, and used by just making it empty by deleting files) ==> Ran this exe file on the computer where this motherboard is....
Inside Windows XP, when BIOS Update process started, In a green window, it shown me current BIOS old version and New Version side by side. (I did not given much attention to notedown from which number to which number it's updating).
In Windows XP after BIOS Process completed, it restarted computer (I kept USB File as it in the computer as I had read that, I have to keep USB in computer after restart).
When computer restarted...nothing came on the screen and just blank screen for long time and on the right side on screen bottom corner only letter like: A2 stayed for long long time. I waited for 15 minutes but nothing was happening except blank screen...
So, I restarted computer....and kept USB as it is in the computer....but Nothing comes on the screen...
After I concluded that, something is wrong, to resolve the issue...
--- What Try and Experiments I have done ----------------------------------------------------------------
(1) I placed Restarted computer without USB: and Message comes on the screen is:
BIOS Update is not yet completed, please insert the USB pen drive and reset system.
(2) I refered some forums, and also contacted MSI Support. As suggested, I formatted USB Drive with FAT32 and placed E7680IMS.C30 file (only one file) on USB placed in computer and started computer.. Now Message is coming:
Updating BIOS...... File Not Found..
Note that: E7680IMS.C30 File was given to me by MSI Support Staff as I did not kept Original files during formatting USB PenDrive.
But computer is not looking for .C30 Rom File, Computer is looking for .BIN File
(3) I have remove the battery and waited for 5 min. and placed again, to reset BIOS, but not difference on result or on message...
Renamed: file E7680IMS.C30 to EIVB.BIN
Result: Just Blank Screen with A2 text on right side bottom corner, No other message
In some other same issue post, they recommand to change ROM File name to: EIVB.BIN which worked for others, so I also tried and renamed: file E7680IMS.C30 to EIVB.BIN, in this case, I was able recreate original Issue: When computer boots, Screen stays completely Blank, and on the right side bottom corner, only 2 digit tect comes is: A2. Computer does not give any other message and nothing happens...even I waited for 30 minutes...
Also, by looking at USB Pendrive light, I can tell that, motherboard is reading file on the Pen Drive...
Renamed: file E7680IMS.C30 to E7680IMS.BIN
Result: Message comes on the screen: Updating BIOS...... File Not Found..
(5) What I am thinking is: When motherboard power-ups, it's giving me two different type of Valid message based on if USB is in the computer or not, based on if file name is .BIN or not, so I believe motherboard is still not dead and there are hope to feed the file which motherboard is looking for. But issue how to find what specific file which it's looking for... Even sometime I have seen at screen right side bottom area, 2 Digit numbers are changing just like system is doing internal healthcheck before booting up...
(6) Note that, I would like to put old version file on USB to feed, but one of the biggest issue with MSI is, once you download EXE from their website, to Extract EXE file content it needs to be run on the same motherboard computer, so in my case, if your motherboard is not in bootable cituation then you can not extract any other BIOS File to try...
Please help me...by havin this computer down....I am suffering everyday...
(By profession, I am electronics Engineer and have worked with programming Microcontroller and bootloaders, but in this case, I do not have SPI Programmer to program BIOS chip externally.)

Thank you flobelix and Nichrome.
Quick Result Summary: 128MB USB Key formatted FAT32 with HP Tool, made MS-Dos Bootable and placed EIVB.BIN file given by flobelix, but final result is: Screen comes Blank and only shows "A0" Code at right side bottom corner. nothing else.
Detail
Since Flobelix proviced ROM BIN File, I was too exicited to try it out and here is what I did...
(1) As per Nichrome link for HP USB Format Tool, I installed it on "Win XP" machine, and formatted 128MB USB key by selecting "FAT32" and selected option to make "MS-DOS Bootable" and shown Win98 source files as per the instruction.
-128MB USB drive made bootable with FAT32.
(2) I downloaded EIVB.rar given by flobelix and extracted and copied EIVB.BIN file on USB root.
Inserted USB in MSI and powered up...
As soon as I give power: Imidiately one normal beep and Screen comes completly Dark Blank. No message about "File not found". only at right side bottom of screen, it shows "A0".
I inserted USB key in each and every USB slot, but result is same: Screen stays Blank and on right side corner only "A0" letter.
I given around 3-5 minutes time to see something changes on screen, but no change.
- If I power-up computer without connecting any USB Drive: then message comes on screen that: Bios Update has not completed, please insert USB Key and Reset System.
- On USB Key, If I put ROM File with any other name (except EIVB.BIN) then Message comes: Updating BIOS... File Not Found...
- I have removed battery to give a try for resetting BIOS, but not change.
Question:
(1) Is it possible that, motherboard is looking for specific version of File or some different version of file ? and just staying silent and not complaining for existing EIVB.BIN ?
Here is I experiment: I simply created empty text file (0 Byte) on USB Drive and given name EIVB.BIN and booted up computer and same result: Blank Screen and just "A0" on right side bottom corner.
So, it tells me that, when power is given, the program which executes in motherboard for BIOS, it is not able to identify real or fake EIVB.BIN. I think, it's looking for some specific file and when not found, it's getting confuse on what to do....and not saying anything on the screen....
Has anyone old version BIN file of H61MU-E35 (B3) ?
Is there any trick so I can download older version Packaged EXE from MSI website and extract it ? I can give a try....

3000 J205 Desktop (9686-A12) Bios Update "File Not Found"

Trying to download any updates/instructions for my BIOS results in "File Not Found" Page.
Flash BIOS update (diskette version)
Installation instructions for flash BIOS update (CD ISO image version)
Flash BIOS update (CD ISO image version)
Flash BIOS update (Flash from operating system version)
Installation instructions for flash BIOS update (diskette version)
Installation instructions for Flash BIOS update (Flash from operating system version)
Would prefer the CD ISO in case any problems are encountered.
Thanks
Jon

Thanks for sharing your experience!

"BIOS ME update....file not found " since a P67A-GD65 bios update failed

Hi everyone,
I've decided to post this little message after looking for a solution over the web and over the MSI forum because I've got a problem since the BIOS update of my P67A-GD65 MB.
I've followed the update process for the 4.32 BIOS using an USB key, the update started but did not continue after reboot, and since My PC is out of order
The "BIOS ME update....file not found " message is displayed after lots of booting tries, using plenty of methods.
I've looked and tried all the techniques I could find over the web, I've tried :
-PC with and without SATA drives connected
-the last 4 versions of the bios found on-line, even the original version of my MB before updating (1.19)
-4 different usb keys (from 128 Mb to 4 GB)
-all front and back usb ports
Each time, on each usb key, there were several bios versions, even one renamed to AMIBOOT.ROM for testing the recovery method.
I've also tried to make the keys bootable by using the “MSIHQ USB Bootable” tool with the 1.19 bios (after the boot fix), the usb key appears in the F11 boot menu but when I select it, the PC boots but still shows me the "BIOS ME update....file not found " message.
I've also tried a clear CMOS with several power off.
I've also tried to burn a CD containing only a AMIBOOT.ROM file, and to boot on it, but same problem occurs.
In brief, it seems that my PC does not recognize my Key's content, whatever it is.
I've you got an idea to help me ?
Last precision, the update process that failed was using the 4.3 bios version, but my CPU is a not an IvyBridge .
thanks for your help

HI
I've tried with your file , that's better but not solved
the "BIOS ME update....file not found" has gone but my bios is still inacessible.
I put the usb key (with the decompressed file) and the PC starts, displays the MSI boot logo, and then shows a message for hitting F1 or F2 bla bla bla...
Whatever the key that has been hit (F1 or F2, and only the first time), the pc boots again and again after displaying the boot logo, followed by a 30 seconds black screen.
If I remove the key, I've got a message that says I have to put a key on an usb port, and when I put back the usb key , the PC starts to boot again and again.
Once again , I'm stuck.
thanks for your help

My iTunes wouldn't update and so I tried to reinstall the new version, my computer restarted and when I clicked on iTunes, it said file not found.

I tried to update my iTunes so I could put some songs onto my ios 7 device and it wouldn't update. I would get a fail message. I went to the apple website and reinstalled it. After my computer restarted, I clicked on iTunes and said file not found. I looked everywhere but could not found a working application link. Help!!

Hi Applefan 6968,
If you are having issues updating or reinstalling iTunes on your Windows machine, you may find the following articles helpful:
Apple Support: Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Regards,
- Brenden

When I Update My Nano, I get error message, "file not found"

When I Update My Nano, I get an error message, "file not found, cannot update iPod". I have looked through the manual and tried reinstalling the iTunes program but it still won't update my iPod with music or pictures. PLease help.

Try these basic troubleshooting steps one at a time.
The Five Rs.

File Not Found / Fade Update Failed Error -43

I have been getting two errors all of a sudden when instigating playback in the Arrange window in Logic 9.
File Not Found Result Code -43
and
Fade Update Field Error -43
I have googled information on this and have tried the following:
Used "Save As" and changed the name of the project file
Removed automation at the start of 3 tracks where i have automated in a gradual increase in volume
Gone to the Audio menu and selected "Delete Fade Files"
None of the above have worked. I have not used the crossfade tool to add a fade to the start or end of a track, i have only created a fade effect by using Volume Automation.
There seems to be other people having the same problem but i haven't found any with the -43 error code.
Does anyone know what that code relates to?
Have you any suggestions as to how i can get rid of this error?
Thanks

I recently had issues with a "File Not Found" error, though it was a different code #. (-61, or something similar.)
I was trying to move a track from my old G4 and work on it on my Macbook Pro laptop.
The problem turned out to be related to file permissions.
Logic is not a network-friendly program, and OS X is hyper sensitive to permissions, so to access a file that was originally stored on another computer, I had to do two things:
"Get Info" for the drive (it was not a system drive) that the original file was stored on, and check the box at the bottom:
"Ignore Permissions on This Volume"
From the user account on that computer, I then copied the file from the internal drive to an external firewire drive which also had "Ignore Permissions" checked off in the "Get Info" window.
I could then access the file from my user account on the laptop.
Once I did those steps, the "File Not Found" error no longer appeared.

H61M-P21 (B3)Updating Bios File not found

Similar Messages

Maybe you are looking for