H6510BD no signal from xbox one

Hi Recently purchased this projector after trying my brothers (same model) which worked great. When I connect to HDMI 1 or 2 I get no signal. If I connect my laptop to HDMI it works and if I then unplug the laptop and connect the xbox it also works. I have read about possible firmware issues and having checked mine (1.3) wonder if it needs updated to 1.5? Contacting Acer support was told the projector is plug and play, there was no firmware available and to contact Microsoft. Have tried multiple HDMI cables and reconnecting the xbox to TV/monitors and all work first time. Any one else seen this issue? Thanks

Have since heard back that the projector isn't compatiable with the xbox one??

Similar Messages

No signal from XBOX 360 when connected to a 65HT2U through HDMI

Good day peepz!
I tried to connect a XBOX 360 to my 65HT2U and it says no video signal
I already tried using other HDMI cables
and resetting the XBOX display settings by using Y and the right trigger
Still it shows no video signal
The weird thing is the XBOX works with my Samsung TV's HDMI ports and
other dervices can work on the three HDMI ports of my 65HT2U.
Is this a compatibility issue between the XBOX360 models and my Toshiba TV?

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
3. The full name of the display adapter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

55TL515U no signal from HDMI inputs

My 55TL515U 3D TV suddenly started showing the "no signal" message from my HDMI inputs. I have a Motorola cable box on HDMI 1 and a PS3 console on HDMI 2. No other inputs are used on the TV. I can connect to the internet and can watch You Tube, Vudu, and Netflix. Both the cable box and PS3 worked fine and now cannot get signal from either one. Is there something to be reset before I call for service?

we do not have this model, but model# 65L5400U, and have had the same experience.
when going from one input to another, we would get the no signal notice and a blank screen. We could turn the tv off and back on, and it would work again.
we also started having a problem with the digital sound output (i think). we have a sound bar coming directly from the tv, and often will have no sound.
specifically when going from an HD to non HD channel, or when looking thru our cable providers on demand choices, then going back to watch TV.- turn the tv off and back on again, and the sound is back.
we have moved the cord from the tv to the cable box and do not have this problem, and hooked up another TV to test the problem, and didnt have it.
I have this TV thru a rental store, and this is the third one Ive had the same problems with.
has anyone ever spoken to Toshiba about a possible problem with this? Im running out of alternate options.

Xbox One Fifa 14 now working on Infinity?

Fifa 13 and 14 were a mess with me on BT infinity. 55 m/b dowload and 15 m/b upload yet every P2P /online game i played just utter lagged. The easo.ea.com server was the bane of my life tracerouting it using my laptop always 120ms + whihc made it useless for gaming on fifa.
I am wondering if anyone who had similar problems has noticed any difference using the Xbox one and their dedicated Microsoft servers for each game. Im assuming the names/ip addresseses of the servers are different and are no longer using the easo.ea.com ones in california?
Any help or knowledge from Xbox One Fifa 14 players appreciated.
Also any other Xbox Obe games and how they work on BT infinity much appreciated

Well i bit the bullet and bought the xbox one and Fifa. The bad news is its exactly the same playing fifa 14 on XB1 as it was on 360 with regards to BT inifinity and awful routing to the games US servers. Averaging 140ms to the Fifa servers on my 55mb d/l infinity connection
Battlefield 4 and forza work absolutely fine all lag free yet I go on Fifa and BT still aint got their stuff together. watch out 1/4 of BT inifnity fifa 14 players you will continue to lag on Xbox one. Doesnt look like ea using the dedicated servers yet as im stil connecting to easo.ea.com when playing fifa

How to create 2 output signal locked in phase from a one input signal

Hi all,
I have a case in which I want read in a signal analog input (voltage) from a photodiode, I want to create a 2 sinewave signal locked in with same phase as the input signal and output them as analog output to my 2 laser diode. the frequency of the input signal is low aroud 15 Hz , the 2 output signal i want to be around 120 hz and 150 hz .
I am using USB - 6003 daq card.
I have created a vi to see the input signal but I dnt know how to create 2 signal from the waveform generator locked in the phase as the input signal. I have seen a PLL vi , but dont know how to use that with my program.
can any one tell me how to proceed.
thanks
AG
Attachments:
pulse_PLL.vi ‏27 KB

Hi AnkitG,
Here are a couple of links that might help you understand a little more how the PLL work and a way to synchronize the task to perform a PLL.
http://digital.ni.com/public.nsf/allkb/07BC8D77D4E9AE258625708B007CE74F?OpenDocument
http://digital.ni.com/public.nsf/allkb/2F675A9F2162EA24862572570059A308?OpenDocument
Also, you should be able to find a lot of examples on how to accomplish the synchronization of tasks on the community, if you consider that the only consideration is that both must start at the same moment.
I hope, these examples might show you some useful concepts:
http://digital.ni.com/public.nsf/allkb/EBD603683446EC13862575B3006A63A2
http://digital.ni.com/public.nsf/allkb/9E71F8D7D3CD1B0886257688004AE353
Regards,
Luis C.
National Instruments

If I purchase a second Airport, will it strengthen the signal from the router in one part of the house , so that the printer, in a basement can see it?

I have a router in my upstairs, main floor of the house.   My iMac connects easily to the router, but the printer does not. If I purchase a second Airport, will it strengthen the signal from the router so the printer will connect wirelessly to the network?
I had the printer connected to the iMac by USB , but when I upgraded the iMac to Maverick OS10 my scanner no longer worked, the more I fussed with it the less productive it was.   Now the printer no longer is available at all.   The computer does not see it.
The message when I turn them on is that the USB is not compatible.    I unplugged the USB cable, and would like to connect wirelessly.
Thank you for any hints
Carol Havens

If you have an Apple router now providing your wireless network, you could add another....like an AirPort Express, for example....to "extend" the signal wirelessly and provide more coverage.
This is always a bit tricky, because the AirPort Express would need to be located where it can receive a strong signal from the main AirPort wireless router.
For example, if you need more wireless signal in a bedroom at the end of the house, you would locate the AirPort Express about half way between the main AirPort router and the bedroom.
On a side note......only the print function will work when you connect an All-in-One device to the USB port on an AirPort, so connect the All-in-One using wireless for full functionality.

Im from Philippines one of our carriers here supports 4G already on selected areas, Im currently in the area where this carrier has 4G now, I couldnt see my phone on 4G signal. Can anybody give me an idea, why?

Im from Philippines one of our carriers here supports 4G already on selected areas, Im currently in the area where this carrier has 4G now, I couldnt see my phone on 4G signal. Can anybody give me an idea, why?

Here's why:
The iPhone 4S does not support 4G. Only the iPhone 5 does (of Apple's iPhones).
Here's an iPhone comparison chart:
http://www.apple.com/iphone/compare-iphones/

Read in signals from a usb 6212 in more then one computer

I have a NI-USB 6212 to read in signals from a industrial proces in the computer. This computer has also a touchscreen so workers can select a reason why the proces is stoped. Now the problem is that this has to happen at two places so with a another compter and touchscreen plus on a another computer has to monitor on a big screen al the procesvariabels. I want to do this al with LABview. What is the best way to do this?
Kind regards,
Solved!
Go to Solution.

fille,
if the signals that are acquired by the 6212 are not too fast, you could write the acquired data to network published shared variables. If your second PC has a network connection to the first one, you will be able to access these shared variables there.
Kind regards,
Jochen Klier
National Instruments

Connecting a xbox one to a iMac

I am attempting to connect a xbox one to my mid 2010 imac as I have read on the forum and on the net that it is possible although people are saying you need a kanex xd which to me I am not willing to spend the money on it as it is quite pricey so I was wondering if a Moshi Mini DisplayPort to HDMI cable would work instead as it is much cheaper than the kanex xd.
Thanks for the help

It uses Target Display mode. The 5K iMac does not support it
The only 2010 iMac that support that mode is the 27" one
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
From reading this
You need the Kanex converter or similar since yo have to convert the X-box singal into a signal that acts like a video from another computer. The simple mini displayport to HDMI adopter works in the other direction.

Xbox one to iMac

hi i have an Apple iMac MF883B/A All-in-One Desktop Computer, Dual-core Intel Core i5, 8GB RAM, 500GB, 21.5" and i was wondering if i could hook up my xbox one with it and if so what i would need?

Hi graphic__designer,
From your question, it sounds like you are asking about Target Display Mode, a feature that allows certain iMac computers to function as an external display for certain other Macs. With regards to using it as an external display for a gaming system like an XBox, you may find the following article helpful:
Can I use the iMac in TDM as a display for my gaming console, DVD player, or other device?
The Mini DisplayPort port on a supported iMac can receive DisplayPort compliant video and audio signals. Converters not made by Apple may provide options to convert other electrical, video, and audio protocols to Mini DisplayPort or Thunderbolt compliant signals.
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
Regards,
- Brenden

How to change HDMI port settings from output to input to accept signals from cable/satellite box?

I have a new dv8t Entertainment PC with the HP Integrated HDTVHybrid Tuner. The instruction manual provides 2 ways to connect the laptop to a cable/satellite box: (1) coax/rf; or (2) HDMI. The coax is a no-brainer; got it up and running in 10 minutes. However, I am unable to get it to work connecting the HDMI cable, as the HDMI port on the laptop appears to be stuck in output mode. How do I change the configuration of the HDMI port to "input" so that it can accept signals from my cable box?

Thank you Grant for the quick response. Well, it seems I don't know what I'm doing.
So, Mac Pro doesn't have any video INPUTS just Outputs. CHECK.
That is correct I have a six-input-port-selector with one input (SWITCH C2G). CHECK.
What I want is to be able to toggle through the inputs from the HDMI Switch C2G. That way I can use all my devices (Mac Pro, Xbox, PS3, Cable Box) with these monitors.
Since the Switch C2G only has one OUTPUT Slot, I'm thinking I just need to connect the monitors to the Switch C2G Output slot by using a 2 to 1 HDMI Adapter, but wouldn't I lose the true potential of these monitors by not connecting them directly to the Mac Pro?
Currently, I have the monitors hooked up with Thunderbolt/Mini Display Adapters to the Mac. So I guess I would just have to run just one HDMI with Thunderbolt/Mini Display from the Mac to the Switch C2G, and connect the other devices to the Switch as well.
Jeez. Am I right?
What If I get an HDMI Switch with 2 Outputs instead of getting the 2 to 1 HDMI Adapter or perhaps a 4 to 2 Adapter. Heck. I'm not sure what to do here.
I would really appreciate anyones help.
Thank you.

Xbox One not being displayed on monitor; Please help!

The monitor will not display the Xbox One's output. I've tried everything, I've unplugged both the monitor and Xbox, unplugged the HDMI from both devices and turned them both on and off. The monitor will not pick up the signal and says "HDMI:No Signal" and then "Monitor going to sleep". Thanks for the help!

I have the same problem for my computer and for you it's most likely you have a dying cord try to run out and buy a new one or borrow one from a friend to be check which cord is messing up

How to read and display a signal from my a miccrontroller (MCB1700) onto labview connected via a CAN port on a PXI machine

How do you read and display a signal from my a miccrontroller (MCB1700) onto labview connected via a CAN port on a PXI machine?
I tried using a DAQ Assistant but the CAN port is not included as one of the supported physical channels even though all its drivers are upto date.
Please help..
Thanks.
Solved!
Go to Solution.

Attached herewith is a print screen of what is showing on MAX
The CAN ports are on NI PXI-8461
Hopefully that clarrifies something.
Attachments:
Untitled.png ‏212 KB
Untitled.png ‏212 KB

How to select signals from the output of a DAQ assistant

Hi!
I am a new user of Labview 8.5 and I am working with a USB-6210. I have two different instruments connected to the same USB device, half of the channels are being used for pressure transducers where I only need to reed and save the data, while the other half are associated to TCD detectors where I need to perform some analysis to the signal to obtain and save the data. I am in the first step of building the block diagram, After I define each of the signals which its corresponding channel using the DAQ assistant, I need to select and separate the signals coming from the pressure transducers from those coming from the TCD detectors, before I can continue drawing the block diagram. I am trying to use the Select Signal function but I am not sure how to do this. Can anyone please let me know at least in which manual can I find a good explanation? I have been reading the Getting Started and the User Manual for LabView but they have not been very useful so far.
Thanks!
Solved!
Go to Solution.

Wire the Select Signals express VI to your DAQ Assistant and run the VI once (this allows the signal names to propegate). Then when you open the Select Signals configuration you'll be able to pick out the channels you want by name instead of just "Signal 1" etc.
It sounds like you'll probably want two Select Signal Express VIs, one for the TCD detectors and one for the pressure transducers. Something like this:
If you right click on the VI and select Help or click on the Help button within the configuration dialog you will bring up the LabVIEW help page for this (or any other) VI. Are you looking for some other information that isn't documented in the help file?
Hope this helps,
Simon

How can I tell if signals from two devices are truly synchronised?

Hi there,
How does one check that signals from two devices (two separate devices in a single X-series chassis) that should be synchronised actually are? I am using a PXIe6361 and PXIe4331 on a PXIe-1073, with Labview 2001 SP1 64-bit. All devices are using the Sample Clock from the 4331 device, and an AI Start Trigger, so they should be synchronised.
I thought that writing the signal data to file and checking the time stamp for each column of data would be the most accurate, but I have been told that timestamps are software created and therefore don't reflect the actual time that the signals were acquired by the hardware. When I do this, the timestamps vary by up to 150ms which is larger than I expected.
If I set the x-axis of the waveform graphs (on the GUI) to "Time" then it appears that the first data sample is taken at different times for the two plots (one plot per device).
If I set the x-axis of the waveform graphs (on the GUI) to "Ignore time stamp" (so that the x-axis just starts from 0 rather than a date-time) then the first data point occurs at "0" for both graphs. However, I'm not sure that this reflects the actual alignment of the signal.
What is the best way to check if signals collected on different devices in the same chassis are actually synchronised?
Thanks,
Claire.

Hi Lynn,
Thanks for your help and for sending the demo.
I understand the concept of how the signals will look if they're not synchronised and your demo shows that nicely. I guess I have been perplexed by someone else telling me that the timestamps in the output file (and following from that I assume timestamps on a waveform graph) do not give an indication of whether signals are synchronised. The reason they gave for this was that the timestamps are manufactured by the software, not the DAQ hardware. They suggested that I put the setting "ignore waveform timestamps" on my waveform graphs, and then check that both signals come in at the same time (i.e. both start at zero), but I'm not convinced about this.
When I use an analog trigger, neither the timestamps in my output file or on the two waveform graphs are synchronised. If I don't use the trigger, then there is far less disparity in the timestamps in the output file. I've attached two output files here, and my VI.
This is my first attempt to synchronise a voltage module and a strain gauge module on an X-series chassis, so I want to make sure that I'm achieving the best synchronisation that I can, and the difference in behaviour with and without the trigger worries me.
Thanks,
Claire.
Attachments:
without trigger.txt ‏5 KB
with trigger.txt ‏6 KB
Multi-Device Synch-Analog Input-Finite Acq-Analog Start_Claire_wDigitalin_12June2012 PTbridge.vi ‏196 KB

H6510BD no signal from xbox one

Similar Messages

Maybe you are looking for