H67 x64 - Unable to install Sandy Bridge VGA driveer
I have the MSI H67MS-E43 motherboard and a Core i7-2600. I've installed most of the x64 drivers from the website (http://www.msi.com/product/mb/H67MS-E43--B3-.html#/?div=Driver). But, the Sandy Bridge VGA driver is giving an error message when I run Setup.exe. The error message is:
This computer does not meet the minimum requirements for installing the software. http://img340.imageshack.us/i/screenhunter01mar261339.jpg/
I found an article on Toms Hardware as well http://www.tomshardware.com/reviews/lucidlogix-virtu-gpu-virtualization,2877-4.html
Suggest you remove your ATI card first, then try and install the Intel drivers off the CD and see if that solves it.
This post is now diverting from the original intent of installing the Intel VGA graphics drivers related to the board itself.
If there are any further questions related to third party software, then please start a new topic in the "Off Topic Technical" section.
Lets focus on the Intel driver installation for your board.
Similar Messages
-
Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)
Hello.
I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
In the order what I did:
1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
3) I installed all the drivers:
- both LAN and WiFi
- Intel Chipset (latest available)
- all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
- Card Reader
- Realtek HD Audio (latest)
- Synaptics Touchpad
- USB3.0
- IR
- TV-Tuner
However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
and followed installation instructions displayed under 'Details'
but there was the same outcome - the setup simply freezes...
Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
- WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
- resuming installation in Safe Mode;
- *Toshiba Value Added Package* hoping those tools somehow will kick in.
Nothing worked...
It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
*Using Bluetooth connection on this laptop is very crucial for me.*
I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
Thank you very much.
Evgeny.
Message was edited by: CVD
clarified about using another generic Bluetooth adapter with non-TOSHIBA driverFor FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
Win7 64bit SP1
PatchFiles V1.0
PlayReady PC Runtime V1.3
Sun Java2 Runtime Environment 1.6.0_20
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
Intel Chipset SW Installation Utility 9.2.0.1015
Intel Management Engine Interface V7.0.4.1197
Intel Display Driver 8.15.10.2353
NVIDIA Display Driver 267.44
Intel Rapid Storage Technology Driver 10.1.2.1004
TOSHIBA Supervisor Password Utility 1.63.51.2C
TOSHIBA HW Setup Utility 1.63.1.34C
TOSHIBA Flash Cards Support Utility 1.63.0.12
TOSHIBA Value Added Package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Realtek Audio Driver 6.0.1.6305
TOSHIBA Wireless LAN Indicator 1.0.3
Intel Wireless LAN Driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Filter Driver Package v1.0.4
Bluetooth Stack for Windows by Toshiba v8.00.06(T)
Realtek LAN Driver 7.038.0113.2011
Jmicron Card Reader 1.00.57.02
ENE CIR Driver V3.2
YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep Utility 1.4.2.7
TOSHIBA Face Recognition 3.1.9
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
HDMI Control Manager 2.0.0.7.64
TOSHIBA Remote Control Manager 3.0.6.1
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree
TOSHIBA Web Camera Application
TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
TOSHIBA Media Controller 1.0.86.2
TOSHIBA Media Controller Plug-in 1.0.6.1
TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG-1.2
PatchFiles
I hope this will help you a bit. -
Unable to install Windows 7 RC x64 on macbook 2.2
hi
im unable to install windows 7 x64 rc on my macbook. i have a macbook 2.2 (white)
after creating the partion using boot camp my comp restarts and gets stuck on a black screen that says
1.
2.
choose CD-ROM boot type :
thats it.. nothing more.. jst a blinking cursor.
any idea wat the error is.
1. can my macbook 2.2 (white) run x64?
2. i have downloaded a patch for bootcamp (bootcampx64.msi) , wat do i do with it?
3. what should i do next?http://jowie.com/blog/post/2008/02/24/Select-CD-ROM-Boot-Type-prompt-while-tryin g-to-boot-from-Vista-x64-DVD-burnt-from-iso-file.aspx
Read carefuly that article. It describes step by step how-to modify Windows 7 64x RC DVD image to boot smoothly on any Mac. Be sure to creat 8 sector disk instead of 4
Thanks to Jowie I was able to install Windows 7 64x on my early Aluminium iMac.
PS: Be sure to download Boot Camp version 2.1.1 and modify it so setup will run without errors. I can't hel you with direct links but I can at least warn you. Have fun and good luck -
Unable to install Update Windows 7 x64-based system KB2952664
Unable to install Update Windows 7 x64-based system KB2952664, Error code 80073701. Internet Explorer 11 for Windows 7(although IE 11 is already installed) fails to install also(at the same time)
Hi,
Please try to do download oracle database 11.2.0.3.0 64 bit
Oracle Database 11.2.0.3.0 is certified on Microsoft Windows x64 (64-bit) 7
Thanks,
Rajasekhar -
HT1926 Unable to install iTunes update on pc with Windows 7 x64 bit
Unable to install iTunes upgrade (11.0.1 on pc running Windows 7 x64 bit. Running old version of iTunes ok. Have tried opening with new administrator but to no avail. Following download message that 'problems with installation' and to tray manually. Same outcome.
Anybody got any ideas?
Thanks
IanTry updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
Unable to install hp all in one officejet x64 drivers windows 8 it
unable to install hp all in one officejet x64 drivers windows 8 64 bit from hp website the select all button is not working.
Hello louvallee,
If you had upgraded you PC OS to win 8.1 and if you were able print with the prior OS, then you may have to first uninstall the existing printer software and try step#
Else
1) Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP. -
Unable to install KB2264107 on 2008 Server with SP2 X86 X64
Hi All,
Is there a reason why iam unable to install KB2264107 on sever 2008 with Sp2 ?
I tried installing the patch and iam getting This update does not apply to your computer
Any troubleshooting steps for finding the fix for the same would really help me
Thanks In Advance !Hi All,
Is there a reason why iam unable to install KB2264107 on sever 2008 with Sp2 ?
I tried installing the patch and iam getting This update does not apply to your computer
Please let me know , this is really urgent
Thanks In Advance !
maybe you already have a newer version of NTDLL.DLL installed?
https://support.microsoft.com/en-us/kb/2264107
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Unable to Install Photoshop CS5 on Windows 8
I'm unable to install Photoshop CS5 on Windows 8. A copy of the installation log is listed below. The first time I tried installing, I had Norton 360 enabled, right-clicked the DVD-ROM drive and selected to execute the installer. It failed at about 5%. Then, I uninstalled Photoshop CS5 and uninstalled Adobe AIR, disabled Norton 360, ran the Creative Suite Cleanup Tool, and then rebooted back into Safe Mode. This time, I browsed the DVD-ROM drive, right-clicked on the set-up.exe file and selected Run As Administrator. Same thing as before. It failed at 5%. Does anyone have any suggestions? Thanks.
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 60 error(s), 56 warning(s)
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: The following payload errors were found during install:
ERROR: - Adobe CSXS Infrastructure CS5: Install failed
ERROR: - Microsoft_VC90_ATL_x86: Install failed
ERROR: - Adobe Media Player: Install failed
ERROR: - Adobe Linguistics CS5 x64: Install failed
ERROR: - Microsoft_VC90_CRT_x86: Install failed
ERROR: - Adobe Photoshop CS5 Support: Install failed
ERROR: - Adobe Bridge CS5: Install failed
ERROR: - Microsoft_VC80_ATL_x86: Install failed
ERROR: - Recommended Common Fonts Installation x64: Install failed
ERROR: - AdobePDFL x64 CS5: Install failed
ERROR: - DeviceCentral_DeviceCentral3LP-en_US: Install failed
ERROR: - Microsoft_VC80_MFCLOC_x86_x64: Install failed
ERROR: - Adobe XMP Panels CS5: Install failed
ERROR: - Photoshop Camera Raw: Install failed
ERROR: - AdobeColorCommonSetCMYK: Install failed
ERROR: - Adobe Mini Bridge CS5: Install failed
ERROR: - Microsoft_VC80_CRT_x86_x64: Install failed
ERROR: - Adobe Photoshop CS5 English Language Pack_x64_AdobePhotoshop12-en_US_x64: Install failed
ERROR: - AdobeColorJA CS5: Install failed
ERROR: - Adobe ReviewPanel CS5: Install failed
ERROR: - Photoshop Camera Raw (64 bit): Install failed
ERROR: - Microsoft_VC90_MFC_x86: Install failed
ERROR: - Adobe Photoshop CS5 Core_x64: Failed due to Language Pack installation failure
ERROR: - Adobe Photoshop CS5 English Language Pack_AdobePhotoshop12-en_US: Install failed
ERROR: - Suite Shared Configuration CS5: Install failed
ERROR: - Adobe Linguistics CS5: Install failed
ERROR: - PDF Settings CS5: Install failed
ERROR: - DeviceCentral: Failed due to Language Pack installation failure
ERROR: - AdobeColorEU CS5: Install failed
ERROR: - AdobeTypeSupport CS5: Install failed
ERROR: - AdobeColorVideoProfilesCS CS5: Install failed
ERROR: - AdobeColorCommonSetRGB: Install failed
ERROR: - Adobe Player for Embedding x64: Install failed
ERROR: - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
ERROR: - Required Common Fonts Installation x64: Install failed
ERROR: - Microsoft_VC90_ATL_x86_x64: Install failed
ERROR: - Adobe CSXS Extensions CS5: Install failed
ERROR: - Microsoft_VC80_ATL_x86_x64: Install failed
ERROR: - AdobeOutputModule: Install failed
ERROR: - Microsoft_VC90_CRT_x86_x64: Install failed
ERROR: - Microsoft_VC80_CRT_x86: Install failed
ERROR: - AdobeCMaps x64 CS5: Install failed
ERROR: - AdobeTypeSupport x64 CS5: Install failed
ERROR: - Microsoft_VC90_MFC_x86_x64: Install failed
ERROR: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: - Adobe WinSoft Linguistics Plugin CS5 x64: Install failed
ERROR: - AdobePDFL CS5: Install failed
ERROR: - AdobeCMaps CS5: Install failed
ERROR: - Microsoft_VC80_MFC_x86_x64: Install failed
ERROR: - Required Common Fonts Installation: Install failed
ERROR: - Adobe SwitchBoard 2.0: Install failed
ERROR: - Microsoft_VC80_MFC_x86: Install failed
ERROR: - AdobeColorNA CS5: Install failed
ERROR: - AdobeColorPhotoshop CS5: Install failed
ERROR: - Microsoft_VC80_MFCLOC_x86: Install failed
ERROR: - Recommended Common Fonts Installation: Install failed
ERROR: - Adobe Extension Manager CS5: Install failed
ERROR: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: - Adobe AIR: Install failedTry http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
-
Solaris 11 Express on Sandy Bridge
I know it's still bleeding edge but what are my chances of getting the latest Solaris 11 Express build running on a Sandy Bridge i5-2400 running a H67 based motherboard – integrated graphics.
Will it boot at all?
Not too worried about efficiencies as yet, but this is for a NAS build.This post is from a sandy bridge build as follows:
* Case: Fractal Design Define R3 Titanium
* Extra Fan: Noctua NF-S12B ULN 120mm Fan
* PSU: Seasonic S12II 430W Power Supply
* MB: Gigabyte GA-H67A-UD3H-B3 Motherboard
* CPU: Intel Core i3 2100T
* CPU Cooler: Noctua NH-C12P SE14
* RAM: G.Skill Ripjaws F3-12800CL9D-8GBRL 8GB (2x4GB) DDR3
* 3 x Data Drives: Seagate Barracuda Green 2TB ST2000DL003
* 2 x System Drives: Western Digital Scorpio Black WD5000BEKT 500GB
* Extra NIC: Intel Gigabit CT Desktop Adapter PCIe
Running fine with Solaris 11 express build 151a, at the moment trying to setup build 164.
Annoying "bug" is that logging out of gdm from the console reboots the system. However since I'm running it headless it's not an issue.
This is a great silent home server/nas box and teh i3-2100T is plenty powerful enough with the bonus of having <<50W power draw from the mains at idle with a max of 90-95W and a typical draw when doing a file copy of 58W.
Issues:
Reboot when logging out from GDM.
Unable to set jumbo frames using dladm, however this works fine on the e1000g0 interface by editing /kernel/drv/e1000g0.conf
so far I have been unable to get a local ips repository running in a usable form. but that has nothing to do with sandy bridge. -
Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS
Another user,
Cheer08, has replied to a thread you have subscribed to in the
SQL Server Express Forum.
Here are the error messages:
Error 2
Error 1
Hello,
This error is related to Microsoft Visual C++ 2005. Could you try to download and install Microsoft Visual C++ 2005 with service pack 1 (SP1) included:
http://www.microsoft.com/en-us/download/details.aspx?id=5638 (x86 or 32-bit)
http://www.microsoft.com/en-us/download/details.aspx?id=18471
(x64 or 64-bit)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thread Title Unable to install SQL Server 2012 on my Surface 3 computerr w/Windows 8.1 as the OS.
Started by: FenixRising
Reply:
Fenix, this is SQL Server forum. Regarding the Visual C++ 2005 SP1 Redistributable setup issue, you need to post question in
visual studio forum to get better help.
After installing Visual C++ 2005 SP1 Redistributable successfully,are you able to install SQL Server? If not, share us SQL Server setup logs. This link
https://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx will help you View and Read SQL Server Setup Log Files
Im going to run it now. Get back to you.Hi,
I am unable to install SQL Server 2012. I have the install log, but I don't can't read them.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2053898239
Start time: 2015-02-08 23:03:01
End time: 2015-02-08 23:07:31
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for RS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for FullText: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: RLC_WORK
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012
Client Tools Connectivity 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools Backwards Compatibility 1033
11.2.5058.0 No Yes
SQL Server 2012
Client Tools SDK 1033
11.2.5058.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033 Express Edition
11.2.5058.0 No Yes
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2100.60 No Yes
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\76766b629842c4dc54646a47c04202\x64\setup\
Installation edition: Express
Slipstream: True
SP Level 2
Product Update Status:
Success: KB 2958429
Product Updates Selected for Installation:
Title: Service Pack 2
Knowledge Based Article: KB 2958429
Version: 11.2.5058.0
Architecture: x64
Language: 1033
Update Source: Slipstream
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: RLC_WORK\Robert
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: Slipstream
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft .NET Framework 3.5
Component error code: 0x85940001
Error description: Error while enabling Windows feature : NetFx3, Error Code : -2146498270 , Please try enabling Windows feature : NetFx3 from Windows management tools and then run
setup again. For more information on how to enable Windows features , see http://go.microsoft.com/fwlink/?linkid=227143
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.5058.0&EvtType=0x681D636F%401428%401&EvtType=0x681D636F%401428%401
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150208_230228\SystemConfigurationCheck_Report.htm
Fenix -
Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1
I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result: Failed: see details below
Exit code (Decimal): -2068053929
Exit facility code: 1212
Exit error code: 87
Exit message: Failed: see details below
Start time: 2014-03-18 14:59:31
End time: 2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
I have been banging my head over and over searching for the fix and nothing has worked. Google used to be my friend. I am having doubts.
Windows 2012 Server with IIS installed during the server creation using VMware Vshpere. Here is the log from the SP prep tool.
2014-06-23 10:13:12 - Processor architecture is (9)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Common Startup
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
2014-06-23 10:13:12 - Trying to remove the startup task if there is any.
2014-06-23 10:13:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-06-23 10:13:12 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-06-23 10:13:12 - Locating the following command line arguments file:
2014-06-23 10:13:12 - C:\sp2013\PrerequisiteInstaller.Arguments.txt
2014-06-23 10:13:12 - Error: This file does not exist
2014-06-23 10:13:12 - Details of the current operating system:
2014-06-23 10:13:12 - Major version number of the operating system: (6)
2014-06-23 10:13:12 - Minor version number of the operating system: (2)
2014-06-23 10:13:12 - Build number of the operating system: (0X23F0=9200)
2014-06-23 10:13:12 - Major version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Minor version number of the latest Service Pack: (0)
2014-06-23 10:13:12 - Platform ID of the operating system: (2)
2014-06-23 10:13:12 - Product suites available on the operating system: (0X110=272)
2014-06-23 10:13:12 - Product type of the operating system: VER_NT_SERVER
2014-06-23 10:13:12 - Product type: (7)
2014-06-23 10:13:12 - OS type: (0)
2014-06-23 10:13:12 - Configuring the application's property sheet...
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Management Framework 3.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - PowerShellVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft .NET Framework 4.5
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - Install
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 4.5.51641
2014-06-23 10:13:12 - A post release .NET 4.5 is installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 6.1.7600.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:12 - Reading version of the following file...
2014-06-23 10:13:12 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:12 - The version is...
2014-06-23 10:13:12 - 1.0.3010.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 10.51.2500.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Server AppFabric
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - ProductVersion
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.1.2106.32
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCC
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheClient is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCS
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheService is Installed.
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - DCA
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - CacheAdmin is Installed.
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 2.0.1230.0
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft Information Protection and Control Client
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 -
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 1.0.959.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:12 - Reading the following string value/name...
2014-06-23 10:13:12 - Version
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:12 - The value is...
2014-06-23 10:13:12 - 5.0.51212.0
2014-06-23 10:13:12 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:12 - Check whether the following prerequisite is installed:
2014-06-23 10:13:12 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:12 - Reading the following DWORD value/name...
2014-06-23 10:13:12 - IsInstalled
2014-06-23 10:13:12 - from the following registry location...
2014-06-23 10:13:12 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:12 - The value is (1)
2014-06-23 10:13:12 - The prerequisite above is already installed
2014-06-23 10:13:19 - Beginning download/installation
2014-06-23 10:13:19 - Created thread for installer
2014-06-23 10:13:20 - "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\2\PreA98B.tmp.XML"
2014-06-23 10:13:20 - Error: Unable to install (2)
2014-06-23 10:13:20 - Error: [In HRESULT format] (-2147024894)
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Flags
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Updates\UpdateExeVolatile
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PendingFileRenameOperations
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SYSTEM\CurrentControlSet\Control\Session Manager
2014-06-23 10:13:20 - Reading the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
2014-06-23 10:13:20 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-06-23 10:13:20 - Last return code (2)
2014-06-23 10:13:20 - Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any
command line options.
2014-06-23 10:13:20 - Cannot retry
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Management Framework 3.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - PowerShellVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\PowerShell\3\PowerShellEngine
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft .NET Framework 4.5
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - Install
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Net Framework Setup\NDP\V4\full
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 4.5.51641
2014-06-23 10:13:20 - A post release .NET 4.5 is installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Windows Identity Foundation\Setup\v3.5
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 6.1.7600.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Sync Framework Runtime v1.0 SP1 (x64)
2014-06-23 10:13:20 - Reading version of the following file...
2014-06-23 10:13:20 - C:\Windows\assembly\GAC_MSIL\Microsoft.Synchronization\1.0.0.0__89845dcd8080cc91\Microsoft.Synchronization.dll
2014-06-23 10:13:20 - The version is...
2014-06-23 10:13:20 - 1.0.3010.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft SQL Server 2008 R2 SP1 Native Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft SQL Server\SQLNCLI10\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 10.51.2500.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Server AppFabric
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - ProductVersion
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.1.2106.32
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCC
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheClient is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCS
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheService is Installed.
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - DCA
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\AppFabric\V1.0\Features
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - CacheAdmin is Installed.
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Windows Identity Foundation (KB974405)
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\Microsoft Identity Extensions\Setup\1.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 2.0.1230.0
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft Information Protection and Control Client
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 -
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Microsoft\MSIPC\CurrentVersion
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 1.0.959.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Microsoft WCF Data Services 5.0
2014-06-23 10:13:20 - Reading the following string value/name...
2014-06-23 10:13:20 - Version
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Microsoft WCF Data Services\5.0
2014-06-23 10:13:20 - The value is...
2014-06-23 10:13:20 - 5.0.51212.0
2014-06-23 10:13:20 - A higher version of the prerequisite above is already installed
2014-06-23 10:13:20 - Check whether the following prerequisite is installed:
2014-06-23 10:13:20 - Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
2014-06-23 10:13:20 - Reading the following DWORD value/name...
2014-06-23 10:13:20 - IsInstalled
2014-06-23 10:13:20 - from the following registry location...
2014-06-23 10:13:20 - SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
2014-06-23 10:13:20 - The value is (1)
2014-06-23 10:13:20 - The prerequisite above is already installed
2014-06-23 10:16:23 - Opening log file
2014-06-23 10:16:23 - Opened action for user
2014-06-23 10:16:23 - C:\Users\ADMINI~1\AppData\Local\Temp\2\prerequisiteinstaller.2014.06.23-10.13.12.logIt looks like you may have extracted the files to C:\sp2013. Can you try installing from a mounted ISO instead? Can you also validate that this is Server 2012 and not 2012 R2?
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Tapeless workflows and Sandy Bridge or other PC's: KISS or LOVE?
Tapeless workflows and Sandy Bridge or other PC's: KISS or LOVE?
Life used to be so simple when shooting video on a tape based camera. You shot your material, captured it for editing and stored your precious original footage on tape in a safe and dry place. Sure, it took time to capture, but the big advantage was that if you had a computer or drive failure, you would still have the original tape so everything could be recreated.
Now with tapeless workflows we have the significant advantage of much faster import of the original footage. Connect the flash card or disk drive to the computer over USB and copy the data to a HDD on the computer, ready for editing. The data on the flash card or disk drive can then be erased, so you can reuse it for more shots. But, like Johan Cruyff has said repeatedly, every advantage has its drawback. In this case it simply means that you no longer have the original material to fall back on, in case of computer or drive failures. That is a very unpleasant and insecure feeling.
The easy anwser to that problem is backups. Backup of the original media, backup of projects and backup of exports. This often means a bundle of externals for backup or NAS configurations. One thing is clear, it requires discipline to make regular backups and it costs time, as well as a number of disks. Four as a minimum: 1 for media, 1 for exports and at least 2 for projects. Note: This is excluding a backup drive for OS & programs.
There are different backup strategies in use. Some say backup daily and use one disk for monday, one for tuesday, and so on. Others say one disk for the first backup, the second for the second backup, then the first again for an incremental backup, etc. and once weekly a complete backup on a third disk. Whatever you choose, be aware that shelf live of a disk is far less than tape. There are horror stories everywhere about ball-bearings getting stuck after some time and without original tapes, you better be safe than sorry, so don't skimp on backups.
What is the relevancy of all this? I thought this was about Sandy Bridge and other PC's.
It is and let me try to explain.
Card based cameras are for the most part DSLR and AVCHD type cameras, and we all know how much muscle is required to edit that in a convenient way. Adobe suggests in the system requirements to use raid configurations for HD editing and practice has shown that raid arrays do give a significant performance boost and improve responsiveness, making for a nicer editing experience. The larger the project and the longer the time-line, the more a raid array will help maintain the responsiveness.
One thing you would not do is using a raid0 for projects, media and exports, even if you have backups. The simple reason is that the chance of disk failure multiplies by the number of disks in the raid0. Two disks double the chance of disk failure, three disks triple the chance, four disks quadruples the chance, etc.
Remember: Disaster always strikes when it is most inconvenient.
Imagine you have been working all day on a project, you decide to call it a day and to make your daily backup, but then the raid fails, before you made your backup. Gone is all of today's work. Then take into consideration the time and effort it takes to restore your backups to the state it was in yesterday. That does not make you happy.
Another thing to avoid is using a software or mobo based parity raid, for the simple reason that it is slooowww and puts a burden on the CPU, that you want to use for editing, not house keeping.
For temporary or easily recreated files, like the page-file, media cache, media cache database and preview files, it is very much advised to use a raid0. It makes everything a lot snappier and if disaster strikes, so what? These are easily recreated in a short time.
This was a general overview of what is required with tapeless workflows. Now let's get down to what this means in terms of system design.
Two approaches or train of thoughts
KISS: Keep it stupidly simple or LOVE: Laughing over video editing
The first one, the most economic one, is to use a system with 3 or 4 disks internally and 4 or more backup disks.
A typical disk setup can look like this:
This is a perfectly sensible approach if one does not have large or complex projects, long time-lines and is willing to take the risk of occasionally losing a whole days work, between backups. Many hobbyists and consumers fall in this category.
The KISS approach keeps it stupidly simple. The drawback is that there is no logical way to add more disks or storage. The discipline, diligence and effort required for regular backups make it far from a laughing matter. In fact it can quickly become a bore. Add to that the fact that the disk setup is simple but not very fast, so less suited for situations where lots of clips are involved, multi-cam is a regularly recurring situation or lots of video tracks are involved.
A number of video editors want more from their system than the occasional platonic KISS, they want to really LOVE their system, which lead to the other train of thought.
This is more costly than the KISS approach, but you all know a fiancée or wife is more costly and dear than the occasional kiss on the cheek by an old friend.
Let's start with a typical disk setup. It may look like this:
Two striking differences in comparison to the KISS approach:
1. Much easier disk organization and more disks and thus more space.
2. It requires a hardware raid controller, causing a higher investment cost. It is like an engagement ring. You don't get LOVE for free, one of the guiding principles of the oldest trade in the world.
These are easy statements to make, but what are the benefits or advantages, that you would fall in LOVE with such a system, and what are the drawbacks? Think back to Johan Cruyff's adage.
The only drawback is cost. The advantages are multiple, easier organization, more speed, more storage, snappier editing, no jerkiness, lesser requirements for regular backups and - this is the major benefit - hardly a chance of losing a day's work in case of a drive failure. Keep in mind that a parity raid keeps all your data intact in case of a drive failure, so lessens the need for up-to-date backups.
We all know, we get what we pay for: "If you pay peanuts, you get monkeys. OTOH, if you pay money to monkeys, you get rich monkeys". But in this case you get what you pay for, a much better editing experience with a much easier workflow.
Using a parity raid (be it raid 3/5/6/30/50/60) you get security, ease of mind that you are protected against losing precious media, that you need not worry about the last time you made a backup, that the editing you did today may be lost and you save valuable time editing and a lot of aggravation because of a much more responsive system.
How does this all relate to Sandy Bridge and other PC's?
First of all, the price difference between a Sandy Bridge / P67 platform and an i7-950+ / X58 platform is very small. Of course the new architecture is slightly more expensive than the older one, but the differences are small, almost not worth talking about.
So what are the differences? Look below:
The first thing to keep in mind is that the Sandy Bridge is the successor of the i7-8xx CPU and as such it is much more evolutionary than revolutionary. The CPU power has increased significantly over the i7-8xx due to new architecture and a smaller production process (32 nm), but in essence all the capabilities have remained unchanged. Same memory, same PCI-e lanes, same version, same L3 cache and no support for dedicated raid controllers.
It is great that the processor performs much better than the older i7-8xx CPU's, almost achieving the level of the i7-9xx range of processors, but is still limited:
The Sandy Bridge is unsuitable for anything more than a KISS system.
Why? Because it lacks the required PCI-e lanes to accomodate more than a 16 x PCI-e nVidia card with CUDA support to enable hardware MPE acceleration and the integrated graphics are not supported by CS5.
You may wonder if that is a bad thing. The plain and simple anser is NO. It is a great processor, it delivers great value for money, is a solid performer, but it has its limitations. Intel had a reason to position this CPU as a mid-level CPU, because that is what it is, a mid-level performer in comparison to what is to come.
The term mid-level performer may seem strange when compared to the old generation of i7-9xx CPU's, because they perform almost equally well, but keep in mind that there is a generation difference between them.
So what about the i7-9xx and X58 platform?
It still is going strong. About the same performance as a Sandy Bridge, with only the much more expensive hexa-cores clearly in the lead, both performance and price wise. The quad cores deliver about the same value for money. The main difference however is the platform that allows a dedicated raid controller to be installed, thus making it the platform of choice for those who want to go from a passing KISS to true LOVE.
And what lies ahead?
Sandy Bridge E on the Waimea platform (X68). Now that is revolutionary. More than double almost everything a processor can offer: double the cores, double the PCI-e lanes, triple the memory, more than double the L3 cache, increase the PCI-e support from 2.0 to 3.0, etc...
This is why Intel calls this a high-end CPU / platform.
So what now?
If you prefer a KISS approach, choose either a Sandy Bridge/P67 or an i7-950+/X58 platform.
If you wonder whether in the future you may need multi-cam more frequently, edit more complex projects and longer timelines or even progress to RED, look at KISS/LOVE solutions, meaning the i7-950+/X58.
If you can't have downtime, time pressure is high, delivery dates to clients are critical or you edit highly complex projects, lots of multi-cam situations or lengthy time-lines, choose a LOVE solution, an i7-950+/X58 platform.
If you have the time to wait till Q4/2011, Sandy Bridge E/Waimea looks to be worth the wait.
Hope this gives you some more insight into recent and future developments and helps you make wise investment decisions.I'm upgrading from an AMD 3800+, cutting with Vegas 7 Pro. Usually shoot DSLR or HDV, sometimes P2, EX or RED. I have ridiculously cheap access to Macs, FCP/FCS, all kinds of software.
I've been agonizing over this for the last month, was originally hoping the UD7 mobo was the solution, read the read about the NF200/PCIe issue a few days ago, http://www.dvinfo.net/forum/non-linear-editing-pc/489424-i7-980x-now-wait-sandybridge-2.ht ml- and still decided to go for a 2600k.
My preference is to treat my video footage the same way as my digital imagery: I make (at least) duplicate back ups of everything before reformatting the cards, never delete the back ups, and only worry about the day-to-day stuff at night. Unless I'm rendering or involved in other long processes, in which case I'll back up the work in process the next day. If I am under a really really tight deadline I might back up as I go.
Yes, a RAID might make it easier, but I'm paranoid enough to prefer a slower, safer backup. You can always duplicate, and usually improve upon, a days work, but you can never get back original footage you lost. I have only ever had one hard drive die on me (a few enclosures crapped out, though)- it took a couple of (mostly unattended) hours to rectify. As a matter of act, I've had far more loss/damage from tapes than from hard drives.
I ordered the UD7, 2 F4s and 4 F3Rs, understanding I will probably want to upgrade to SBE when it comes out, or maybe next year. The 2600k/mobo/RAM will likely hold its value better than a 950/X58, likely because of the marketplace as much as merit.
The UD7 / RAID card issue is in it's early days, there may be a solution/mitigation. Probably not. But if I really really need a RAID card, then I probably really really need a 980, NAS, etc etc.
But Harm still rocks! -
Unable to install JDK 6 on Windows Vista
Hi
I am unable to install jdk 6 (jdk-6u4-windows-x64)on windows vista. I am getting error at installing time and it will terminate process.
Can any one help me!
Thanks in advance
DaveNot without exact problem information.
Read the Installation Instructions (at where you gor Java.) -
Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise
Standalone installer available here
http://www.microsoft.com/en-us/download/details.aspx?id=28972
fails with error code 0x80004005
Is this because my installation has issues, or would the admin pack files be updated for RTM?
Thank you in advance for any insightFound the solution here:
http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
Workaround:
Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
Extract the .msu file with a tool such as 7-Zip.
Open an Admin command prompt and change directory to where you extracted the .msu.
Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
Use the tools as per usual.
Maybe you are looking for
-
Download Box Pops Up When Viewing Websites With Facebook Like Buttons
Whenever I visit websites that have the option to click the "like" button from facebook (cnn, tmz, etc.), the download box on my computer pops up and says "You have chosen to open like.php from www.facebook.com in Text Edit" or "You have chosen to op
-
Using Acrobat 9 Standard on desktop running Win 7 32Bit - and an HP1536dnf MFP - Scanner function
Using Acrobat 9 Standard on desktop running Win 7 32Bit - and an HP1536dnf MFP - Scanner function won't run - message states that driver missing - have tried to re-load original software many times from CD and download from HP website - that times
-
Why do I have to pay for OS X Server again after upgrade to Mavericks?
This morning I upgraded my Mac Mini from Mountain Lion to Mavericks. After the upgrade I noticed the Server app wasn't available. When I try to start it I see error that this version isn't compatible with my version of OS X. When I go to the AppStore
-
Fully Qualified Hostname problem with 9iAS install on WinNT
I am working within a corporate lan and installing 9ias to a Windows NT Sp 6 PC. I am using a fixed ip address and a fixed dns server. Although in the tcp/ip properties, dns tab I specify the hostname (shashi_build) and the domain (optus.com.au) and
-
How to transfer photos from itouch to macbook pro
Hello, long story short, my iphoto library got deleted before the transfer was complete to aperture.......i now have 2000 corrupted photos. i only have one back up. ther are all still on my itouch (4th gen with 4.3.5). i need a way to transfer them t