H67A-G43 (B3) - Windows 7 64-bit Install issues with Video Card(s)

Specs
Case - CoolerMaster CMP 350 w/500 Watt PSU
Motherboard - MSI H67A-G43 (B3)
Processor - Intel i7-2600
Memory - 16GB (4x4GB) DDR3 1333
Hard Drive - Western Digital Caviar Green 1TB SATA 2
Video - *multiple cards tested
Issue
OS Installation
Video Card - ASUS HD 7850 DirectCUII - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
Video Card - GeForce 9300 GE - Computer POSTs, begins to load Windows 7 setup, freezes on the Windows 7 installer background.
Video Card - MSI N430 GT - Computer does not POST.
Video Card - Integrated - Computer boots and completes install of Windows 7 64-bit. Install all drivers, update BIOS to current version.  Attempt to boot with video cards listed above with new BIOS, same issues. (First two hang on Windows logo, 3rd no POST.)
Attempted Resolutions
As stated, I have tried 3 different video cards, as well as 2 motherboards, both of them MSI H67A-G43(B3).
We have ordered 2 other new motherboards (one ASUS, one Gigabyte) because we need to get this built for the customer ASAP.  However, we have previously used the H67A-G43 boards with no issues.  We would like to be able to use these motherboards on future builds.  What possible solutions are there for these issues?

Quote from: HU16E on 20-April-12, 03:32:27
Tried a battery removed CMOS clear and reset after the UEFI/BIOS update? Tested with another PSU? Tried with just one RAM stick in the primary dimm slot, or with just two sticks?
Results
1 Stick DDR3 - Freezes in "Starting Windows" screen when video card (HD 7850) installed.  Still works correctly with Integrated.
1 Stick DDR3 + swapping out CoolerMaster 500 Watt PSU for "Power" 500 Watt PSU - Freezes in "Starting Windows" screen with video card.  Using Integrated video, works correctly.
This is on an unflashed H67A-G43 (B3) new out of the box.

Similar Messages

  • Motherboard issue? With video card.

    Mainboard:  760GMA-P34(FX) (MS-7641)   
    PCB Version:  5.0
    BIOS Version: VP.0 (aka Version: V25.0)
    BIOS Date:  5/28/2013
    Everything works fine using onboard video. Windows 7 64 bit.
    Plug in my Nvidia GT 620 and immediately CPU fan maxes out with no increase in temperature, system still stable using standard VGA driver provided by windows. After ANY NVIDIA driver is installed, windows blue screens upon boot. We can't see the error because the blue screen is too quick, and it immediately tries to reboot and restore. Event logs show nothing.
    I'm at a loss here. MSI motherboard tech support isn't open on the weekends, hopefully you guys can shed some light. Is this common? Do I need a new board? I've never come across anything like this before. The rest of the machine is 100% stable, the only issue(s) that arise is when the video card and the drivers are installed. The video card works fine in another machine, I've replaced the power supply with a much heftier one with more juice, and the same thing happens.
    Thanks!

    Quote from: badboy2k on 03-May-15, 21:22:59
    >>Posting Guide<< <-- can you read and list your parts used here?
    Without above done, hard to say what I think.

  • LMS 4.2.3 - C6500 VSS - Issue with inline card on secondary chassis

    Hello,
    We are currently setting up a fresh new LMS 4.2.3 server to administrate a 90 LAN-device-perimiter. Installation is OK (on a Windows Server), devices are up, monitored and their configurations archived.
    The core switches are Catalyst 6506 VSS (s2t54-IPSERVICESK9-M - 15.1(1)SY) including 2 inlines cards :
    - WS-C6505E-SUP2T
    - WS-X6824-SFP-2T
    There is an issue with line card WS-X6824-SFP-2T recognition on secondary chassis only. We updated the last software packages for LMS (via Admin > Software Center > Device Update) and situation improved but still, it is not behaving as excepted.
    Impact : Topology, Ciscoview and Device Center for C6506-VSS do not show the card and links on the WS-X6824-SFP-2T of secondary chassis.
    Do you have this issue as well ? Any direction or help ?
    I am afraid of a potential bug...
    Rgds,
    Yoann

    When you were placing the internal test calls, where was your phone located?   The RTP streams are usually only set up between the two endpoints (assuming no transcoder or MTP is used).
    Have you have already checked calls between IP phones at your central site (where Unity is located) and IP Phones at site A?   Are these working fine?   If not, then it's likely you do have a QoS issue over the WAN to Site A.
    Have you confirmed whether or not calls from the PSTN gateway at site A experience any voice QoS issues when transferred to an IP Phone at the central site?
    Is the same codec is being used for the MGCP gateway as for IP Phones at that site (check the Region settings for the Device Pool it's in)?
    If these things have all been checked, then you may want to consider collecting a simultaneous sniffer trace from each end of a single call, and comparing what's seen at the two endpoints.
    Kind regards,
    Craig

  • No sound after installing geforce 210 video card in hp pavilion a1430n

    I've seen the advice about changing bios sound device setting from auto to enabled, but there is no sound device choice in the bios of this model.
    Control panel>sounds shows "no audio device installed"
    I installed this new geforce 210 video card (in addition to existing GeForce 6200) in order to support 3 monitors. I previously had a Geforce 5200 FX installed for this purpose, but it died. The new 210 has HDMI output. Some of the responses in this forum credit this as part of the problem.
    I only need audio out of the headphones on the computer - not using any external audio like speakers, monitors, etc.
    IN device manager, under sound, video and game controllers there is a long list
    Audio Codecs
    Legacy Audio Drivers
    Legacy Video Capture devices
    Media control devices
     4 entries of NVIDIA High Definition Audio - which all seem identical looking at properties
    Video Codecs
    All show working properly
    Any help or advice greatly appreciated
    E de T
    This question was solved.
    View Solution.

    Hi,
    Installing a new video card can disable the on-board sound chip so check the following.
    Shut down the PC. Tap away at f10 as soon as you press the power button to access the Bios Menu - the option you want is most likely under the Advanced Tab.  Look for an entry titiled 'Onboard Audio'.  If it shows as Disabled, navigate to it using the arrow keys, hit enter, use the arrow keys to select 'Enabled' and hit enter again.  Press f10, select 'Yes' or 'Ok' and hit enter to save the change.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HT1918 How do you solve an issue with the card? I don't get the option of 'none' :(

    How do you solve an issue with the card? I don't get the option of 'none'

    I had this exact same problem with the new iPhone I bought on 1/4/13. The walk through they provide on how to do this is useless because it fails to explain that if you are already having the problem of not getting the "None" payment option with an Apple ID then you will need to create a completely new Apple ID.
    I had to do this 7 times since I bought my iPhone on Friday until this morning to figure out how to finally be able to use the Home Sharing option in iTunes to put my music collection on my brand new $500.00 iPhone. Pretty pathetic if you ask me but since it made me so angry I want to make sure other know how to do this so you don't get as upset as I did.
    #1 If your current or soon to be "old" Apple ID is not providing the option for "None" as a payment option then you need to make a brand new one. But you have to make it specifically how I tell you.
    #2 You will need to use an email address that has not already been used for anything related to a previous Apple ID. You might need to make a brand new email address.
    #3 Open iTunes, then open iTunes Store (upper right corner of iTunes).
    #4 Click on App Store (upper center of screen).
    #5 Scroll down the screen page until you see Top Free Apps on the right side.
    #6 Choose any one of the FREE apps.
    #7 You should either get the option to create a new Apple ID box, either that, or it will pop up with some kind of disclaimer and then it does the create new Apple ID.
    Either way just create a new Apple ID when it gives you the option to and then when you get to the page that looks like the payment page the "None" payment option will finally be available.
    Note: You will still have to fill out the information on the payment page. As long as you choose the "None" option it will not request any credit card information.
    #8 You will be sent a confirmation email to the new email account. Just follow through with what ever it tells you and viola now you can use your Apple Device.
    What a pain in the keester, eh?

  • Intermittent issues with video output initialization

    Hi Guys,
    I have received a new (i5, 15') Mac-book Pro more than 9 months ago. About 6 months ago it started having some serious intermittent issues with video output. Those issues are numerous and different every time, but all seems to lead to GPU problem. In chronological order:
    1)Started showing static colors as flickering and white color as blue.
    2)Blue screens in bootcamp and hangs in mac os
    3)Startup problems (fail to start)
    4)Startup problems resolved with firmware patch, but video fails to initialize during startups:shows black on mac os, and distorted green during bootcamp.
    So right now I am stuck with #4. The main issue is that it is intermittent - sometimes it starts to happen and sometimes it does not. Is there any way I can make apple replace the unit or the video-card? I did bring it to a apple certified service center, but they did not give any crap, even when I was able to demonstrate it to 2 people in there and gave me back the unit after failing to reproduce the problem on their own. I have all those problems in video and photos, but I don't see anywhere I could send them besides this forum.
    Some of the evidence (I have much more):
    http://www.youtube.com/watch?v=MsTYnUFCX1I
    http://www.youtube.com/watch?v=zK85Hi9gx24
    http://www.youtube.com/watch?v=pRH3DpN7qB0
    http://www.youtube.com/watch?v=dMXo8qF6S_k
    Message was edited by: Breakable

    "I have received a new (i5, 15') Mac-book Pro more than 9 months ago."
    You are still under warranty. *Call AppleCare*
    "Is there any way I can make apple replace the unit or the video-card? I did bring it to a apple certified service center, but they did not give any crap"
    No you cannot make Apple do anything. What you can do is call _Apple Customer Relations_ in your country. You can call AppleCare & ask politely & firmly to be transferred over to Customer Relations if there is no direct phone number like there is in the US. Relay to them what you stated in this post. See what they can do for you.
    You posted in the wrong MBP area (Original). I have requested that a HOST move your post to the proper forum MacBook Pro (2008 and Later). There will be no need for you to repost.

  • Issues with Video Conversion in N95 8GB

    I purchased a N95 8 GB yesterday. I have been trying to get the video conversion to work with video manager
    The conversion status tab do not go beyond 40% and it hungs there without any error message.
    Has anyone faced similiar issues with video.
    I used another convertor to convert the AVI file to mp4. But this file could not be played by N95 real player.
    Are there any specification for conversion, for the video to play in N95.
    Can anyone suggest on the best tool to convert video to MP4 and play in N95 ?
    Thanks,
    Sooraj

    For tips and tricks on video and nseries visit this blog..
    http://portablevideo.blogspot.com/
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

    Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
    Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

    Lindsay,
    Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
    Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
    It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
    I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
    Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

  • Connection issue with Gift Card

    Hi everybody,
    I have a problem when trying to connect to iTunes Store to redeem a gift card. Whenever I push button "use code" (please apologize for translation: I'm using the italian version), I get a message saying that iTunes Store could be busy and I should verify Internet connection.
    But when I run iTunes Diagnostics everything is OK.
    The issue won't happen (I think) if I buy a song normally.
    I'm using the newest version of iTunes (7.3.1.3) and I've de-activate Widnows Firewall but the problem still occurs.
    Do you have any suggestions?
    Thank you in advance
    Riccardo

    Hello there sam234,
    Gift cards are always awesome to purchase, and even better to receive! I’m sad to hear that you seem to be having continued issues with one you may have purchased from us. Generally speaking, we can usually resolve the issues with gift cards, especially if they are Best Buy gift cards.
    That being said, I am sending you a private message to gather further details about the $50 gift card you seem to be having troubles with. You may check your private messages by signing into the forum and clicking the envelope icon in the top right corner of the page.
    Sincerely, 
    Tasha|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Windows 7 Install Issues with Mac Pro

    I have Mac Pro with Windows XP SP3 installed with Boot Camp on a separate, dedicated 250GB HD.
    I purchased an upgrade version of Windows 7 Home Premium. I hoped to install the 64-bit version. I upgraded, per Boot Camp I&S Guide, Boot Camp to version 3.1. After Boot Camp upgrade, I mounted the Windows 7 64-bit installation disk. Since the Windows disk did not open automatically, I then attempted to open the Setup.exe file but got the following error message –
    “D:/setup.exe is not a valid Win 32 application.”
    I suspect the Boot Camp 3.1 upgrade was for the 32-bit Windows XP system currently installed and this caused Windows 7 (64-bit) not to open.
    If my suspicion is correct, would upgrading to Boot Camp 3.1 (64-bit) cause problems with the currently installed Windows XP? Any advice would be appreciated.

    I have since attempted to boot from the Windows 7 install disk by using both the OS 10.6.3 System Preferences/Startup Disk and from within Windows XP using the Boot Camp Control Panel. In both cases, all I saw was a black screen with a “Select CD-ROM Boot Type” and flashing cursor. No keyboard input was possible.
    If anyone encounters this problem, go to the Boot Camp/Installation and Storage discussion and search for “Select CD-ROM Boot Type”. Hal Jay Greene has an excellent article here titled “Select CD-ROM Boot Type Error installing Windows 7 in Boot Camp walkthrough” dated Mar 20, 2010 that walks one through the process of creating a boot disk for installing Windows 7 x64. Two minor comments on his discussion. John Anderson’s blog is at www.AndersonsHatch.com (note extra s) and Imgburn can be downloaded free from www.imgburn.com.
    I used Mr. Greene’s procedure and the resultant boot disk loaded Windows 7 correctly.
    Unfortunately, a new issue arose. Installing Windows 7 over Windows XP requires a clean install that eliminates all Boot Camp installations. After installing Windows 7, I attempted to load Boot Camp by inserting the Mac SL installation disk and clicking on Setup in the Boot Camp folder. The result was this error message: “Boot Camp x64 is unsupported on this computer model”. Fortunately, there is a procedure that worked for me, and my MacPro, to bypass this error message. It can be found near the bottom of this article http://blog.andersonshatch.com/2009/01/11/windows-7-x64-on-a-macbook-pro-guide/ on John Anderson’s blog.
    Message was edited by: johnshap

  • Windows 7 install issue with Snow Leopard

    Hey Guys!
    Just upgraded my Macbook Pro (Unibody Late 2008) to Snow Leopard and did all software updates.  I then partitioned the drive to install Windows.  When installing Windows it would only install if I reformatted the partition I wanted to install it on.  So I did that.  After hours of installing and udating Windows 7 I found that I did not have bootcamp on the bar at the bottom.  I tried to upgrade to BootCamp 3.1 but it says Bootcamp 3.0 is needed and not present.
    How do I install Bootcamp 3.0 from Windows?
    How do I get back to Mac OS?  I have been stuck (ugh!!!) in Windows since Friday...
    I tried to download the pdf file to read about installing Windows 7 but Windows will not install Acrobat Reader  (I really hate windows), fought with it for 1 hour trying to install it.
    anyways thanks in advance for the help
    KK

    Hey Guys
    I eventually solved the Boot Camp Problem but then shortly after that had a different problem crop up. 
    It will not boot my Mac OS, it says the partition is corrupted.  Even if I boot from an install disk, it will not mount the Mac portion of the Hard drive.  Best info I can get on the issue is that part of my B Tree is too large?  Mac Repair utility will not fix it.
    Suggestions?  Even if I cannot use the partition as a bootable drive I would like to get my data from that disk.  Unfortunately I do not seem to have a backup of the data on that drive.
    thanks
    KK

  • Windows xp itunes install issue

    I am attempting to install Itunes using Windows XP at Service Pack 3 with all the security updates installed. The instal begins and during the final process of setup, I receive the following error message and the Itunes instal backs out and stops.
    Error message, " These is a problem with this Windows Installer package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or package vendor".
    I am looking for some advice after working on the Apple and Microsoft website's trying to find a solution.

    Thank You B Noir for the helping hand in reapiring my problem in loading Itunes.
    I ended up working with an Apple Service Tech who had me delete all the programs associated with the Apples Itune install. Quicktime, Apple Application Support, Apple Modile Device Support, Bonjour and Apple Software Update.
    Each of the programs were un-installed with no issues until we started the uninstall of Apple Software Update, which your note indicated could be a cause for the install issue.
    Using the Windows program "Fixit" downloaded off the Microsoft website, we determined that the registry keys for this program had become corrupted. We used Fixit filtering down to an install repair module inside if Fixit to remove the damaged program from my PC's registry then Fixit uninstalled the Apple Software Update program.
    Once this was done, we were able to successfully instal Itunes using the latest Itunes install packaged found on the Apple website.
    Thanks Again for your advice.

  • Windows 7 Pro DNS issue with static IP

    0
    down vote
    favorite
    I have been unable to solve a DNS problem I am having as follows:
    I have a Windows 7 Professional (64 bit) computer running VirtualBox with a couple of Windows XP guests (not sure if this bit is relevant). After heavy file copying/transfer on both of the Windows XP machines, both the guest machines AND the host loose anything
    DNS related, so I cannot call anything by name, but by direct IP works fine. The only resolution is to reboot the (host) machine and it will then work OK for a while until it happens again. The only trigger to make it seem to happen quicker is to re-initiate
    the heavy file transfer and this then causes the DNS resolution to stop working again.
    The machine has a fixed IP address, so it isn't related to DHCP.
    I've tried the machine connected wired and wireless, no difference.
    The IP settings are manual and I have tried giving it the DNS settings of the router (normal settings) and I have also tried giving it Google's DNS servers (8.8.8.8 & 8.8.4.4). No difference.
    It seems to happen (sooner) during heavy traffic.
    Other Windows 7 machines in the network work fine (though they are Home version, not Pro).
    ONLY DNS fails, direct IP works OK.
    Reboot seems only solution at the moment.
    I am now lost as to what to try to resolve this issue, I do not really want to reload Windows 7 as it is a relatively new install... I have read about issues with wired connections on my router (BT Home Hub 2.0) so tried a wireless connection, still the
    same.
    Here is my ipconfig /all (it shows the BT Home Hub router DNS settings, but it also failed with Google's 8.8.8.8 and 8.8.4.4 entered here and also with the routers 192.168.1.254 (default).
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation. All rights reserved.
    C:\Users\G>ipconfig /all
    Windows IP Configuration
    Host Name . . . . . . . . . . . . : e1
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
    Physical Address. . . . . . . . . : 30-85-A9-AD-07-81
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::59f:484a:827f:42ba%11(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.1.87(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.254
    DHCPv6 IAID . . . . . . . . . . . : 238060969
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-39-2B-4D-30-85-A9-AD-07-81
    DNS Servers . . . . . . . . . . . : 217.32.171.21
    213.120.234.30
    NetBIOS over Tcpip. . . . . . . . : Enabled
    Ethernet adapter VirtualBox Host-Only Network:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter
    Physical Address. . . . . . . . . : 08-00-27-00-28-56
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::8d2d:7418:381b:8dc0%15(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.56.1(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    DHCPv6 IAID . . . . . . . . . . . : 336068647
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-39-2B-4D-30-85-A9-AD-07-81
    DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
    fec0:0:0:ffff::2%1
    fec0:0:0:ffff::3%1
    NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter isatap.{486D4DCC-9CB7-417E-A796-596E0E6B1D54}:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{67455999-75A5-436E-9EAC-12B093363132}:
    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes
    C:\Users\G>
    Any ideas where to look, or what other info to provide for any assistance?
    Many thanks in advance.

    Hi,
    This has just happened again, here is the content of the netstat results as requested...
    If I kill the VirtualBox virtual machines, it starts working again. It is as if there are no ports left, but I am not occupying that many? Surely Windows 7 can cope with this?
    I feel I am missing something important, but cannot put my finger on it...
    Further below, I have re-run the netstat command AFTER I have closed the VirtualBox machines and the system works OK.
    netstat results DURING ISSUE:
    Active Connections
      Proto  Local Address          Foreign Address        State           PID
      TCP    0.0.0.0:21             0.0.0.0:0              LISTENING       1444
     [FileZilla Server.exe]
      TCP    0.0.0.0:25             0.0.0.0:0              LISTENING       1692
     [MESMTPC.EXE]
      TCP    0.0.0.0:80             0.0.0.0:0              LISTENING       4
     Can not obtain ownership information
      TCP    0.0.0.0:110            0.0.0.0:0              LISTENING       1660
     [MEPOPS.EXE]
      TCP    0.0.0.0:135            0.0.0.0:0              LISTENING       752
      RpcSs
     [svchost.exe]
      TCP    0.0.0.0:143            0.0.0.0:0              LISTENING       1524
     [MEIMAPS.exe]
      TCP    0.0.0.0:445            0.0.0.0:0              LISTENING       4
     Can not obtain ownership information
      TCP    0.0.0.0:1221           0.0.0.0:0              LISTENING       4796
     [VirtualBox.exe]
      TCP    0.0.0.0:2199           0.0.0.0:0              LISTENING       4820
     [VirtualBox.exe]
      TCP    0.0.0.0:3306           0.0.0.0:0              LISTENING       1756
     [mysqld.exe]
      TCP    0.0.0.0:3389           0.0.0.0:0              LISTENING       1104
      CryptSvc
     [svchost.exe]
      TCP    0.0.0.0:6901           0.0.0.0:0              LISTENING       4636
     [WinVNC.exe]
      TCP    0.0.0.0:6901           0.0.0.0:0              LISTENING       4636
     [WinVNC.exe]
      TCP    0.0.0.0:8300           0.0.0.0:0              LISTENING       3464
     [sc_serv.exe]
      TCP    0.0.0.0:8301           0.0.0.0:0              LISTENING       3464
     [sc_serv.exe]
      TCP    0.0.0.0:8360           0.0.0.0:0              LISTENING       3080
     [sc_serv.exe]
      TCP    0.0.0.0:8361           0.0.0.0:0              LISTENING       3080
     [sc_serv.exe]
      TCP    0.0.0.0:9022           0.0.0.0:0              LISTENING       4804
     [VirtualBox.exe]
      TCP    0.0.0.0:9023           0.0.0.0:0              LISTENING       4804
     [VirtualBox.exe]
      TCP    0.0.0.0:9080           0.0.0.0:0              LISTENING       4804
     [VirtualBox.exe]
      TCP    0.0.0.0:10001          0.0.0.0:0              LISTENING       4828
     [VirtualBox.exe]
      TCP    0.0.0.0:10002          0.0.0.0:0              LISTENING       4828
     [VirtualBox.exe]
      TCP    0.0.0.0:10003          0.0.0.0:0              LISTENING       4828
     [VirtualBox.exe]
      TCP    0.0.0.0:10011          0.0.0.0:0              LISTENING       4780
     [VirtualBox.exe]
      TCP    0.0.0.0:10012          0.0.0.0:0              LISTENING       4780
     [VirtualBox.exe]
      TCP    0.0.0.0:10013          0.0.0.0:0              LISTENING       4780
     [VirtualBox.exe]
      TCP    0.0.0.0:25566          0.0.0.0:0              LISTENING       3648
     [TerrariaServer.exe]
      TCP    0.0.0.0:30001          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30002          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30003          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30004          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30005          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30006          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30007          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30020          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30021          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30039          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30080          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30081          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30082          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30083          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30084          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30085          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30086          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30087          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30088          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30089          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30090          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30091          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30092          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30093          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30094          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30095          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30096          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30097          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30098          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30099          0.0.0.0:0              LISTENING       4788
     [VirtualBox.exe]
      TCP    0.0.0.0:30101          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30102          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30103          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30104          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30105          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30106          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30107          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30108          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30109          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30110          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30111          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30112          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30113          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30114          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30115          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30116          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30117          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30118          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30119          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30120          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30121          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30139          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30180          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30181          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30182          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30183          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30184          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30185          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30186          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30187          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30188          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30189          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30190          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30191          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30192          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30193          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30194          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30195          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30196          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30197          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30198          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30199          0.0.0.0:0              LISTENING       4812
     [VirtualBox.exe]
      TCP    0.0.0.0:30201          0.0.0.0:0              LISTENING       4796
     [VirtualBox.exe]
      TCP    0.0.0.0:30239          0.0.0.0:0              LISTENING       4796
     [VirtualBox.exe]
      TCP    0.0.0.0:33306          0.0.0.0:0              LISTENING       4796
     [VirtualBox.exe]
      TCP    0.0.0.0:49152          0.0.0.0:0              LISTENING       440
     [wininit.exe]
      TCP    0.0.0.0:49153          0.0.0.0:0              LISTENING       880
      eventlog
     [svchost.exe]
      TCP    0.0.0.0:49154          0.0.0.0:0              LISTENING       1000
      Schedule
     [svchost.exe]
      TCP    0.0.0.0:49156          0.0.0.0:0              LISTENING       508
     [lsass.exe]
      TCP    0.0.0.0:49157          0.0.0.0:0              LISTENING       500
     [services.exe]
      TCP    0.0.0.0:49158          0.0.0.0:0              LISTENING       3048
      PolicyAgent
     [svchost.exe]
      TCP    127.0.0.1:8361         127.0.0.1:49364        ESTABLISHED     3080
     [sc_serv.exe]
      TCP    127.0.0.1:14147        0.0.0.0:0              LISTENING       1444
     [FileZilla Server.exe]
      TCP    127.0.0.1:14147        127.0.0.1:49162        ESTABLISHED     1444
     [FileZilla Server.exe]
      TCP    127.0.0.1:49162        127.0.0.1:14147        ESTABLISHED     3156
     [FileZilla Server Interface.exe]
      TCP    127.0.0.1:49212        127.0.0.1:49213        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49213        127.0.0.1:49212        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49214        127.0.0.1:49215        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49215        127.0.0.1:49214        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49216        127.0.0.1:49217        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49217        127.0.0.1:49216        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49218        127.0.0.1:49219        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49219        127.0.0.1:49218        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49220        127.0.0.1:49221        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49221        127.0.0.1:49220        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49222        127.0.0.1:49223        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49223        127.0.0.1:49222        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49224        127.0.0.1:49225        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49225        127.0.0.1:49224        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49226        127.0.0.1:49227        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49227        127.0.0.1:49226        ESTABLISHED     4288
     [java.exe]
      TCP    127.0.0.1:49364        127.0.0.1:8361         ESTABLISHED     3100
     [Instore_Radioboss.exe]
      TCP    192.168.1.87:139       0.0.0.0:0              LISTENING       4
     Can not obtain ownership information
      TCP    192.168.1.87:3389      217.156.134.12:22971   ESTABLISHED     1104
      CryptSvc
     [svchost.exe]
      TCP    192.168.1.87:8360      81.148.248.221:1026    ESTABLISHED     3080
     [sc_serv.exe]
      TCP    192.168.1.87:25565     0.0.0.0:0              LISTENING       4288
     [java.exe]
      TCP    192.168.1.87:50644     37.139.0.151:8233      ESTABLISHED     4796
     [VirtualBox.exe]
      TCP    192.168.1.87:51019     81.27.96.46:21         TIME_WAIT       0
      TCP    192.168.1.87:53126     192.168.1.86:445       ESTABLISHED     4
     Can not obtain ownership information
      TCP    192.168.1.87:60462     192.168.1.86:445       CLOSE_WAIT      4
     Can not obtain ownership information
      TCP    192.168.1.87:65029     37.139.0.151:8231      ESTABLISHED     4796
     [VirtualBox.exe]
      TCP    192.168.56.1:139       0.0.0.0:0              LISTENING       4
     Can not obtain ownership information
      TCP    [::]:21                [::]:0                 LISTENING      
    1444
     [FileZilla Server.exe]
      TCP    [::]:25                [::]:0                 LISTENING      
    1692
     [MESMTPC.EXE]
      TCP    [::]:80                [::]:0                 LISTENING      
    4
     Can not obtain ownership information
      TCP    [::]:135               [::]:0                 LISTENING      
    752
      RpcSs
     [svchost.exe]
      TCP    [::]:445               [::]:0                 LISTENING      
    4
     Can not obtain ownership information
      TCP    [::]:3306              [::]:0                 LISTENING      
    1756
     [mysqld.exe]
      TCP    [::]:3389              [::]:0                 LISTENING      
    1104
      CryptSvc
     [svchost.exe]
      TCP    [::]:30239             [::]:0                 LISTENING      
    4796
     [VirtualBox.exe]
      TCP    [::]:49152             [::]:0                 LISTENING      
    440
     [wininit.exe]
      TCP    [::]:49153             [::]:0                 LISTENING      
    880
      eventlog
     [svchost.exe]
      TCP    [::]:49154             [::]:0                 LISTENING      
    1000
      Schedule
     [svchost.exe]
      TCP    [::]:49156             [::]:0                 LISTENING      
    508
     [lsass.exe]
      TCP    [::]:49157             [::]:0                 LISTENING      
    500
     [services.exe]
      TCP    [::]:49158             [::]:0                 LISTENING      
    3048
      PolicyAgent
     [svchost.exe]
      TCP    [::1]:14147            [::]:0                 LISTENING       1444
     [FileZilla Server.exe]
      UDP    0.0.0.0:123            *:*                                   
    964
      W32Time
     [svchost.exe]
      UDP    0.0.0.0:500            *:*                                   
    1000
      IKEEXT
     [svchost.exe]
      UDP    0.0.0.0:3702           *:*                                   
    964
      EventSystem
     [svchost.exe]
      UDP    0.0.0.0:3702           *:*                                   
    964
      EventSystem
     [svchost.exe]
      UDP    0.0.0.0:4500           *:*                                   
    1000
      IKEEXT
     [svchost.exe]
      UDP    0.0.0.0:5355           *:*                                   
    1104
      Dnscache
     [svchost.exe]
      UDP    0.0.0.0:53274          *:*                                   
    4780
     [VirtualBox.exe]
      UDP    0.0.0.0:53727          *:*                                   
    4788
     [VirtualBox.exe]
      UDP    0.0.0.0:54111          *:*                                   
    4828
     [VirtualBox.exe]
      UDP    0.0.0.0:54112          *:*                                   
    4828
     [VirtualBox.exe]
      UDP    0.0.0.0:54113          *:*                                   
    4780
     [VirtualBox.exe]
      UDP    0.0.0.0:55421          *:*                                   
    964
      EventSystem
     [svchost.exe]
      UDP    0.0.0.0:58596          *:*                                   
    964
      EventSystem
     [svchost.exe]
      UDP    0.0.0.0:59838          *:*                                   
    4812
     [VirtualBox.exe]
      UDP    0.0.0.0:62498          *:*                                   
    4796
     [VirtualBox.exe]
      UDP    127.0.0.1:1900         *:*                                   
    4172
      SSDPSRV
     [svchost.exe]
      UDP    127.0.0.1:55045        *:*                                   
    4172
      SSDPSRV
     [svchost.exe]
      UDP    192.168.1.87:137       *:*                                   
    4
     Can not obtain ownership information
      UDP    192.168.1.87:138       *:*                                   
    4
     Can not obtain ownership information
      UDP    192.168.1.87:1900      *:*                                   
    4172
      SSDPSRV
     [svchost.exe]
      UDP    192.168.1.87:55043     *:*                                   
    4172
      SSDPSRV
     [svchost.exe]
      UDP    192.168.56.1:137       *:*                                   
    4
     Can not obtain ownership information
      UDP    192.168.56.1:138       *:*                                   
    4
     Can not obtain ownership information
      UDP    192.168.56.1:1900      *:*                                   
    4172
      SSDPSRV
     [svchost.exe]
      UDP    192.168.56.1:55044     *:*                                   
    4172
      SSDPSRV
     [svchost.exe]
      UDP    [::]:123               *:*                                   
    964
      W32Time
     [svchost.exe]
      UDP    [::]:500               *:*                                   
    1000
      IKEEXT
     [svchost.exe]
      UDP    [::]:3702              *:*                                   
    964
      EventSystem
     [svchost.exe]
      UDP    [::]:3702              *:*                                   
    964
      EventSystem
     [svchost.exe]
      UDP    [::]:4500              *:*                                   
    1000
      IKEEXT
     [svchost.exe]
      UDP    [::]:5355              *:*                                   
    1104
      Dnscache
     [svchost.exe]
      UDP    [::]:55422             *:*                                   
    964
      EventSystem
     [svchost.exe]
      UDP    [::]:58597             *:*                                   
    964
      EventSystem
     [svchost.exe]
      UDP    [::1]:1900             *:*                                   
    4172
      SSDPSRV
     [svchost.exe]
      UDP    [::1]:55042            *:*                                   
    4172
      SSDPSRV
     [svchost.exe]
      UDP    [fe80::59f:484a:827f:42ba%11]:1900  *:*                                   
    4172
      SSDPSRV
     [svchost.exe]
      UDP    [fe80::59f:484a:827f:42ba%11]:55040  *:*                                   
    4172
      SSDPSRV
     [svchost.exe]
      UDP    [fe80::11a6:2283:bc40:c0cb%16]:1900  *:*                                   
    4172
      SSDPSRV
     [svchost.exe]
      UDP    [fe80::11a6:2283:bc40:c0cb%16]:55041  *:*                                   
    4172
      SSDPSRV
     [svchost.exe]

  • Windows 8 blank screen issue with N660Ti PE 2GD5/OC

    Dear MSI support.
    My current setup:
    Motherboard: Asus P8Z77-I DELUXE
    CPU: i5 3570K
    RAM: 8GB G.Skill Sniper 1866 MHz - CL9
    GPU: MSI GeForce GTX 660 Ti Power Edition (OC) (stock BIOS)
    After running Windows 8 Professional (64-bit) on my computer with my iGPU (Intel HD 4000) I installed my new GPU (MSI Geforce 660 Ti PE). After my first boot with my new GPU, the BIOS info is displayed on the screen, then the Windows 8 logo and finally the screen goes blank. If I set my bios settings to use iGPU Windows boots normally again.
    I've even tried a fresh install of Windows 8 with the same results. When the installation process completes the "Getting devices ready" text is displayed for a couple of minutes before the screen goes black again. I can log on to Windows 8 in Safe-Mode with the 660 but not in normal mode.
    I've also tried to install Windows 7 (32-bit) which works fine with the 660. So it's sound's like a Windows 8 compatibility issue to me.
    Any suggestions or tips are highly appreciated.
    Thank you very much.
    Bogganero.

    what PSU you use?
    Display? how's connected to the VGA?
    check also:
    http://social.technet.microsoft.com/Forums/en-US/w8itproinstall/thread/f3846fb7-0db9-446d-bc8c-33d34ff47122/
    http://www.eightforums.com/installation-setup/4505-screen-went-black-after-getting-devices-ready.html
    http://www.neowin.net/forum/topic/1115183-installation-stuck-at-getting-devices-ready/

  • APEX Listener 1.1.4 install issue with listener configuration

    Oracle XE 11gR2
    APEX 4.1.1
    APEX Listener 1.1.4
    Glassfish 3.0.1
    =============
    Installing APEX Listener 1.1.4 to replace APEX Listener 1.0.2. Deployed apex.war file but now:
    (1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images. Still I can enter data into fields. Wonder why the graphics/images are missing when page is rendered.
    (2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". I can connect via SQL Developer to APEX_PUBLIC_USER with same credentials. I was able to connect before with previous APEX Listener.
    Any ideas?

    Hi,
    (1) http://10.10.1.111:8080/apex/listenerConfigure web page comes up but with no frames/windows rendered, as if it can not find images.
    You either have to clean your browser cache or your browser is too old/not capable of rendering the css of APEX Listener correctly.
    (2) after entering Listener connection information for user APEX_PUBLIC_USER, I get "Permission denied". "Permission denied" doesn't sound an issue with your database configuration. Do you have anything in your APEX Listeners log (probably within your GFs server.log) for that issue?
    But perhaps the error disappears as soon as you also get a proper configuration page.
    -Udo

Maybe you are looking for