H67MA-E45 - Audio driver will not install

Hello,
I look very much forward to suggestions how to install audio drivers for mainboard H67MA-E45 under Windows XP SP3.
After the hotfix KB888111 was installed, the Device Manager shows "Other Devices/Audio Device on High Definition Audio Bus" (four of them show up).
I tried to install the latest audio driver 5.10.0.6151 (Windows XP) from MSI's web site, but I always get the same error message: "The hardware was not installed because the wizard cannot find the necessary software". I have looked through all available catalogues to find the missing files, without success.
Regards
Adlon

Thank you Svet, I tried the following suggestion but it did not work:
"Do this:
Go to device manager, then expand "System Devices", and locate "MS UAA bus" Right click over it, then click "Disable".
Reboot and enter in "Safe Mode", {hit "F8" just after bios post screen}
Once done go to device manager then expand "System Devices", and locate "MS UAA bus"  Right click over it, then click "Un-install".
Reboot PC, then run Realtek driver installation again."
Instead of "Other Devices/Audio Device on High Definition Audio Bus" the Device Manager now shows "Other Devices/Unknow device (four of them)"
Same message after trying to install the audio drivers "The hardware was not installed because the wizard cannot find the necessary software".
I also tried to install the audio drivers after I had changed from version SP3 to SP2 in the registry, but no difference.
Any more suggestions?

Similar Messages

  • Hp officejet pro 8610e driver will not install in windows 8.1

    the Hp drivers will not install from disc or online download.

    Hi @aggie62,
    Welcome to the HP Forums!
    I understand that your HP Officejet pro 8610 driver will not install on Windows 8.1. I am happy to help!
    A few questions for starters:
    What happens when you try to install the driver?
    Do you see any error messages?
    How is your printer connected? Wireless, Ethernet, or USB?
    Are you able to make copies with your printer?
    In the meantime, please try the following:
    Uninstall the software. Uninstalling the Printer Software.
    Clean boot the computer. How to perform a clean boot in Windows.
    Disable any antivirus programs. How to Disable Antivirus in Windows 8?
    Disable any firewall programs. Windows Firewall from start to finish.
    Create a new user account. Managing User Accounts and Logins (Windows 8).
    Re-install using the HP Printer Install Wizard for Windows .
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Tecra sound card driver will not install "driver was not installed" message

    Hello
    I have a Tecra 9100,running XP pro with s/p 2 and when I try to install the Yamaha AC-XG sound driver it will unzip the files then looks like he's loading the files thru InstallShied, but then a error message comes up "driver was not installed" I have tried several different ways but no success,any help would be greatly appreciated.

    Hi,
    You are using now 6.10.6159.0 D (SP43935.exe) version? Right?
    So uninstall Your audio drivers and try to install previous version 6.10.6087.60 C from here.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Adobe Pdf Converter Print Driver Will not install

    Acrobat V9.0
    Vista Utimate Service Pack 1
    I have not been able to print to the PDF Printer. I get the following error when I select the PDF printer.
    "The 'Adobe PDF Converter' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
    When I say yes and select version 8.5.0.0 printer since it is the latest version. I get a Add Printer Driver Wizard window that says. "Unable to install adobe pdf converter, Type 3 - User Mode, x86 driver. Access is denied.
    I went through all the recommended steps on the web site listed below with no success.
    Thanks in advance for you help.!!!!!!!!!!!!!!
    Jim
    Solution 1: Use a supported installation.
    The following are unsupported installations, and the supported solutions:
    If you install Acrobat (Professional or Standard) on a 64-bit operating system, then you may
    see this error. Please update Acrobat to version 8.1 or later. You can update from within
    Acrobat via the help pull-down menu, or download the updater from the following location:
    http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows.
    If you install Acrobat to a shared network disk instead of a local hard disk, then the Adobe PDF
    printer is not installed. Install Acrobat on a local hard disk.
    TechNote Details
    PRODUCTS AFFECTED:
    DID THIS RESOLVE
    YOUR PROBLEM?
    Yes
    No
    300 characters
    Acrobat Professional
    Acrobat Standard
    Acrobat 3D
    TechNote
    Home / Support /
    Your account o Y Contact United States (Change)
    Home Solutions Products Support Communities
    Company Downloads Store
    Error "Warning 20225..." or no Adobe PDF printer appears (Acrobat 8.0 and Acrobat 3D 8.0 on Windows)
    http://kb.adobe.com/selfservice/viewContent.do?externalId=333221&sliceId=1[10/4/2008 2:04:17 PM]
    If you install Acrobat to a directory with a path that contains extended ASCII or double-byte
    characters, then English installations will display the error message. Install to a path that does
    not contain extended ASCII or double-byte characters.
    Solution 2: Ensure that the Print Spooler process is running and set to
    Automatic, and then repair Acrobat.
    1. Select Start > Settings > Control Panel.
    2. Double-click Administrative Tools and then double-click Services.
    3. Locate the service Print Spooler.
    4. If the Startup Type is not Automatic, then set it to Automatic:
    a. Right-click the Print Spooler.
    b. Choose Properties.
    c. Choose the General tab.
    d. Choose Automatic in the Startup Type menu.
    e. Click OK.
    5. If the Print Spooler service is not running, then start it.
    a. Right-click the Print Spooler line.
    b. Select Start from the menu.
    6. Start Acrobat, and choose Help > Detect And Repair.
    Solution 3: Ensure that the Print Spooler process has no additional
    dependencies.
    Only the Remote Procedure Call dependency is required for Print Spooler to operate.
    Additional Services can attach to the process but will interfere with restarting the service.
    If the Print Spooler process has additional dependencies, then please refer to the steps
    below.
    To remove all services listed under "This service depends on the following system
    components":
    1. Choose Start > Settings > Control Panel.
    2. Double-click Administrative Tools and then double-click Services.
    3. Right-click Print Spooler and choose Properties.
    4. Click the Dependencies tab.
    5. Record services under "This service depends on the following system components" and click
    OK.
    Imporatnt: Remote Procedure Call is a system service and should not be removed.
    6. Temporarily remove associated programs for the listed services.
    7. Contact the service vendor for removal information if removal of associated software does
    not remove the service.
    8. Start Acrobat, and choose Help > Detect And Repair.
    To disable all services listed under "The following system components depend on this
    service":
    1. Choose Start > Set

    I am having similar problems. After years of successful use, about a year ago, my printer (Epson stylus Photo R300) stopped working. After much investigation, it appears my computer no longer recognizes my printer. I've followed resets, safe boots, uninstalls, reinstalls, etc. This happened so long ago, I don't recall what I was doing when it happened. I'm figuring it happened shortly after a Software Update... So far none of the fixes recommended to me have solved the problem. I've been using Epson customer support, but they've stopped responding. None of their suggestions have seemed to work either.

  • AMD High Definition Graphics Driver will not install

    HP Pavilion g6-1b59wm Special Edition Notebook PC. Windows 7 Home Premium 64-bit service pack 1. HP Support Assistant downloaded the AMD High Definition Graphics Driver it will not install. Have tried 3 times to install it.

    HP SA has been a bit wacky lately-even trying to install Windows 8 drivers on some Win 7 machines.Try downloading and installing manually from your driver page:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5256​...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Print driver will not install

    I am hoping someone can help me (new to these discussions)
    I have a mac pro and I accidentally deleted my printer. I downloaded a new driver however it will not install. It unstuffed... I get the install screen but when I click on it, it does not run. It actually asked me what app I would like to choose to run it.
    I have no clue what to do now. I have never had this happen Can anyone help me?
    Thanks

    I am having similar problems. After years of successful use, about a year ago, my printer (Epson stylus Photo R300) stopped working. After much investigation, it appears my computer no longer recognizes my printer. I've followed resets, safe boots, uninstalls, reinstalls, etc. This happened so long ago, I don't recall what I was doing when it happened. I'm figuring it happened shortly after a Software Update... So far none of the fixes recommended to me have solved the problem. I've been using Epson customer support, but they've stopped responding. None of their suggestions have seemed to work either.

  • Ipad Driver will not install on PC. Not recognized and will not show up in iTunes

    I traded for a 1st gen iPad and when I plug it into my computer (windows 7 home premium) the driver did not install and now the ipad is not recognizable. Can you help?

    What version of iTunes are you using?
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom

  • HT204095 Apple Mobile Device USB Driver will not install

    I've followed the steps to stop and restart Apple Mobile Device Service.  I've deleted 3rd party software I thought would conflict.  I uninstalled/reinstalled ITunes several times, but it will not recognize my iPod.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The section Install missing components may help if a particular component will not install when using the main iTunes setup program.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version, or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Internal Card Reader Driver Will Not Install -- Pavilion g4-1319tu

    1. Product Name and Number: HP Pavilion g4-1319tu
    2. Operating System installed: Windows 7 ultimate 64-bit
    3. Error message: none
    4. Any changes made to your system before the issue occurred: none
    At first my card reader did not show up at all in Device Manager until after I actually inserted an SDHC card yesterday 17 jUNE 2012. Windows recognized the card and installed its own driver, Microsoft driver version 6.1.7600.16385 dated 21/6/2006, with the device's manufacturer being listed also in Device Manager as only "(Standard disk drives)" at Location 0, with the status shown as "This device is working properly". The card reader worked (and still works) and appears -- but only with the SD card inserted, otherwise it does not appear at all -- in both in Device Manager and in Computer>Devices with Removable Storage. I went to HP's Support Wizard site to update the driver. The site detected my product correctly and offered an update, "Realtek Card Reader Driver -Version: 6.1.7601.85" (sp55030) to download. I downloaded it and installed it. The newly downloaded driver shows up in Programs and Features. However, even after many uninstall / re-install attempts, the new driver version refuses to show in Device Manager's driver properties for the device. It also does not show when in Device Manager I try to manually update by "Browse my computer for driver software>Let me pick from a list of drivers on my computer". All that shows is the old generic Microsoft driver named above. If while in Device Manager, I try to update the driver manually by "Browse my computer for driver software>Search for driver software in this location (folder where it is saved on my notebook)", it shows, but still will not update / install. A message pops up saying there is no driver in that location. In addition, after I eject and physically remove the SD card from my notebook, the device and driver also disappear from Device Manager until I re-insert the card, even when Device Manager is set to "Show hidden devices". Please advise.

    Hi, Ken:
    The parts list for your notebook indicates that it has an Atheros 9485GN 802.11b/g/n 1x1 WiFi and 3012 Bluetooth 4.0 combination adapter.
    http://partsurfer.hp.com/Search.aspx?SearchText=B5Z50UA
    Give these a try...
    When a notebook has a combination wireless/bluetooth card, you install the corresponding model bluetooth software for the model wireless card your notebook has.
    Atheros 2011 Wireless LAN Driver
    File name: sp54972.exe
    Atheros Bluetooth Driver
    File name: sp55212.exe

  • Realtek wireless driver will not install on Satellite P855-S5200

    I had to reload win 7 home premium from scratch. Everything but the wireless driver will install. The LAN Driver is a Realtek so I am assuming the WLAN is a Realtek also. I have tried each of the drivers listed in the download section with no success.
    Can someone point me in the right direction to fix this?
    Thanks!!!

    No , ! on the detailed specs of the NB you need to get the Intel wireless drivers .
    Checked there the communications : http://support.toshiba.com/support/staticContentDetail?contentId=3426318&isFromTOCLink=false
    (Everyone was new at one point)
    You wanna say thanks ?? click the white star on the right side >>>

  • Iphone driver will not install

    i have just bought an iphone 3GS on ebay.plugged it in to itunes to restore it. the data was wipped and i got a message saying driver not installed. iphone is now not recognised in itunes or my computer and says in recovery mode in device manager. phone now does not work. help

    Hopefully you didn't buy a jailbroken iPhone or you may never get it working (a reason to avoid buying on on ebay).  If Windows does not recognize the phone (it isn't shown in device manager), check item number 4 at the bottom of this guide (Apple Mobile Device USB Driver): http://support.apple.com/kb/TS1538.  If Windows does recognize it but iTunes doesn't, then work through the other troubleshooting steps in this guide, particularly items 2& 3 at the bottom (Apple Mobile Device Service).

  • Scanner Driver will not install

    I have a Visioneer One Touch 9520 scanner my pc will not load the drivers to know that the scanner is there.  I tried installing, uninstalling and reinstalling, rebooting,  disable fire wall. enalbeing fire wall, checking properties.  I have windows 8 and it is say it is not compatible. should I just give up?  Please help, it worked on my last HP pc.

    Hello 5D,
    Welcome to the HP Forums.
    Please click on the following link to get to the Visioneer Support site.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • MSI TI4800SE VTD8X driver will not install

    There is another thread about this issue, but it doesn't seem to address my problem. I'm assembling a computer. Throughout the assembly, the screen has not been right. In DOS mode, some of the letters are misshapen; some have descenders, strange marks attached to the bottom of the letters, In WinXP, the screen has multicolored vertical stripes, and the screen is sometimes broken up into blocks, with some blocks missing or out of place. I could read it well enough to get WinXP installed, thinking it was probably just a driver problem. However, I can't install the driver. It acts like it's going to install, then the machine reboots. I have used the MSI online update to update all of the mainboard drivers. I'm sure there's something I'm overlooking, but I don't know what. Help will be appreciated.

    bob32256,
    Try the Vid Card in another comp and see if you can duplicate the problem. I want to see if the problem is the Vid Card or the AGP Slot itself. Once we know that, we will worry about getting the lastest  nVidia ForceWare Drivers to install.
    Take Care,
    Richard

  • NI PCI-6503 driver will not install

    I have downloaded the driver for this device from your website.
    The installation fails with a message
    specified file not found:[MsiEngine] WinNTpath = supportFiles\instmsiw.exe
    correct the ini file and try again
    This error occurs when I try to install
    NI-DAQmx Ver 8.
    and exactly the same error occurs when I try to install
    NI-DAQ (legacy) Ver 7.4.1
    either of which, I understand, will drive my hardware.
    The file instmsiw.exe exists in the folder which contains all the unzipped data from the zip file.
    I am using Win XP but it is installed on my D drive because I am in a multi-boot configuration.

    Hi Cardy,
    You may find the following links helpful.
    This explains what the instmsiw.exe is:
    http://ae.natinst.com/operations/ae/public.nsf/web/searchinternal/5af5aec49f316ee186256fb3006a2004?O...
    These links contain proceedures that that I would suggest trying:
    http://forums.ni.com/ni/board/message?board.id=250&message.id=6715&requireLogin=False
    http://forums.ni.com/ni/board/message?board.id=170&message.id=146572&requireLogin=False
    Hope this helps you,
    Emma R
    NIUK & Ireland

  • Driver will not install

    Hello.  After days of arguing with the system, I'm asking for help.
    Background:
    I've used a C5280 for printing and scanning on a home network for years.  All computers were running Win 7 and all printed. A few months ago, the printer suddenly stopped giving the option of scanning to PDF.  I don't remember the details, but I fixed this easily.  I'm pretty sure it was a simple uninstall and reinstall of the driver.
    Recently, I had to replace the computer the printer was connected to (USB) and have now entered the world of Win 8.1 (ugh, not a fan but irrelevant).  After installing drivers on new 8.1 computer (worked fine), I soon realized that I could not get the Win 7 computers to print.  I argued with windows homegroup and sharing features for a while.  Never resolved
    Decided to connect the printer to one of the Win 7 computers and see what happened.  It worked--all computers could see and use the printer.
    Problem
    After doing my happy dance for above, I realized that scan to PDF was not an option.
    Unfortunately, attempts to install the driver on this Win 7 system have not worked. When I just download the file, it downloads fine.  When I open the file, it extracts fine.  There it stops.  The installer does not launch.  No error message, no nothing.  Also, when I attempt to use the tools HP offers (print and scan doctor and printer install wizard), it still does not work.  (After spending about 20 minutes seeming to download the software, it abruptly exits.)
    Any help would be appreciated. 

    Hi John3a,
    I understand you have a Photsmart C5280 that you're having issues getting installed on a Windows 7 PC. I'm sorry to hear this, but I will certainly do my best to assist you!
    I'm wondering if it's an issue with the Windows Installer on that one computer since you're not able to utilize the Print and Scan Doctor or the Install Wizard. You had mentioned there were several Windows 7 PC's in the house, would you be able to try it on a different computer to see if it is just the one computer?
    Let me know if this is possible and we will go from there!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

Maybe you are looking for

  • Can 2 users on a macbook pro share an iPhoto library?

    We have 2 users on the one laptop and would like to be able to share the iphoto library between us. Is it possible?

  • Sub contract order

    Dear all I want to know about the Subcontarct process in  MM. thanks Kashyap

  • Be able to choose only some customer to create a sales order

    Hi experts, Iu2019ve been checking this thread bellow, so that I can solve my trouble, but  Iu2019m still trying to find out if this method can help me solve an issue, BADI CRM_ORDER_AUTH_CHECK When a salesman is going to create a sale order he shoul

  • Import and Method Execution Error (8)

    Hi, I having problem in BI 7. when I transport all objects in one transport number such as DOSTransformationDTPDSInfoPackage and transport in QA works fine but when I move in PRD no efect in there and get this messages: Method Execution with error (8

  • Video Black on V Cast Media Manager

    When I synced my videos to vcast media manager, the thumbnails show up and the videos will play on my phone.  However, when I try to play them on my computer and when I burned them to a DVD, they show up black.  the audio plays fine, but no video.  A