H77MA-G43 with Highpoint Rocketraid 640 - Not posting

Hi All,
I recently brought a H77MA-G43 and built a system running VMware ESXi which runs fine. However when I try to add a Highpoint Rocketraid 640 which works on my main PC (Asus M/B) the system wont post. I've tried numerous variations of the Bios settings for the Highpoint card but cannot find anything on the H77MA-G43 bios which would get the card working.
I have put a HP P212 Raid card on the mainboard which works fine (except for VMdirectpath I/O (works but the VM's don't see the HP card properly, I can troubleshoot this myself)) but I really do need the Highpoint functioning for the additional SATA 6Gbs ports.
A previous bios (v1.3) included support for the Rocket 620X1 Gen2 card so I thought an update to the latest bios 1.4 would help but it did not.
Does anyone have any experience or ideas on troubleshooting this sort of problem or how I go about requesting this issue to be resolved or added to a future Bios?
Cheers,

Quote from: andryrus on 17-September-12, 19:40:26
Raximus
Hi,
I've got similar MB (Z77) and P212
but Raid is not working - i see the P212 initialization during boot and nowhere else - windows, linux, ESXi. (https://forum-en.msi.com/index.php?topic=161815.0)
Don't think this is a RAM or HDD problem...
What Cpu do you use?
Hi Andyrus,
I was planning to update this forum on my ESXi antics on my motherboard and good thing I did otherwise I would never had replied.
The CPU I have is a i5 3550, my HP P212 has a cache module but no BBWC. 16GB RAM installed (I'm at work so I cant check the brand).
http://ark.intel.com/products/65516/Intel-Core-i5-3550-Processor-6M-Cache-up-to-3_70-GHz
ESXi detects it under storage controllers and I could use it without issue. I always had arrays configured when booting, do you?
I would try the 'How To Contact MSI' link in this thread to contact MSI, they turned around a beta bios very quickly (be warned the English isn't great but they are helpful).
Raximus

Similar Messages

  • Drives won't wake with HighPoint RocketRAID Quad eSATA 6Gb/s For Mac 644

    Just setting up and configuring a new 2010 12 Core Mac Pro 2.93Ghz with a HighPoint RocketRAID Quad eSATA 6Gb/s For Mac 644, and I've run into a problem. Currently, I have four WD WD600 Velociraptor drives hooked up to the card, functioning as individual drives (haven't tried RAID as of yet). OS 10.6.4, and version 1.0 of the Highpoint software.
    Anyway, the card seems to work well, but I'm having big problems when I put the computer to sleep. If it's only asleep for a short time, the drives hooked to the RocketRaid card will be there. If the sleep time is longer (a few hours or more), they will no longer be in the Finder. When I wake the computer, I do hear the drives hooked to the card spin up, but they're not there. I've tried powering the drive case on and off, and that does not bring them up. Also tried unplugging and re-plugging them, and that also does not work. Going into "more info" in About this Mac shows that the card is still there. The only way to get the drives back, though, is to restart the computer. This is a drag for me, because I use my system mainly with Logic Pro, and load huge banks of samples that take a long time to load.
    This card is supposed to be able to go to sleep. I wonder why it won't. I've sent multiple support requests to Highpoint, with no response. I'd sure like to find an eSATA 4 port card that would sleep. Unfortunately, there aren't many eSATA 3.0 6Gb/s options on the market yet.
    Any input, advice, suggestions would be welcome.

    Sonnet E4P (I have one in old Mac Pro)
    http://www.xlr8yourmac.com/archives/feb10/022510.html#S26630
    Unhappy with E4P
    http://discussions.apple.com/message.jspa?messageID=11163806#11163806
    Sonnet does not endorse every drive with their products, harkens back to SCSI which some people assume a drive is a drive is a drive in spite of persistent problems, and, there have always been "bugs" in Apple's AHCI and drivers.
    would suggest the FirmTek SeriTek/2ME4-E for the Apple Mac Pro. You can view its performance tables with various configurations here: http://www.firmtek.com/seritek/seritek-2me4-e/perform/
    http://discussions.apple.com/message.jspa?messageID=11163806#11163806
    To quote FirmTek:
    The ability to hot swap hard disks is typically a function of the eSATA controller driver. I found the Apple Built-in AHCI driver may not always support hot swap with all SATA enclosure types. If you find this is the case with your particular dock then a restart may be required.
    The benefit of the built-in Apple AHCI driver is that it provides instant support for several SATA controllers. The downside to the AHCI driver is that it has limitations and may not work properly or at all with some configurations. In addition, if the AHCI driver does not work for you the company that sold the controller usually cannot correct the issue as the AHCI driver was not built by them.
    To address these issues FirmTek designed a driver for the 6G based SeriTek/e6G that allows it to properly hot swap with direct connect and Oxford 936/946 based enclosures. In addition, the new FirmTek driver also supports port multiplier based enclosures like the SeriTek/5PM. A dedicated driver can provide extra features that may not be available with the AHCI driver.
    A 4-port card for direct connect, a 2-port card for what? PM case? SSDs?
    http://firmtek.stores.yahoo.net/sata2me4e.html
    http://firmtek.stores.yahoo.net/satae6g.html
    Another user was totally unhappy with the HP RR and was looking for ideas, I gave him a bunch, but never returned to follow up on their thread. So no idea or help there. I think CalDigit to drive 8/12-bay using mini-SAS interface.
    edited

  • FM2-A75MA-E35 with A10-5800K will not POST

    This is my first post, but not my first build. When I power on the processor, the CPU fan and the case fan start, but I have no signal or power at any of the rear panel connections. As a result, I have no keyboard, mouse, or monitor. Is it likely that I have a bad motherboard?
    Here are the specs:
    AMD A10-5800K APU (new):      s/n 9L33252B30018
    MSi FM2-A75M-E35 Motherboard (new):   s/n 601-7721-010B1307193315
    The board is MS-7721 version 1.3
    Any suggestions would be appreciated. Thanks.
    Bob

    I removed motherboard and CPU, examined the CPU installation prior to removal from its socket. All looked OK while in the socket - no misalignment and no bent or exposed pins. I then removed the CPU from the socket and examined again. It is in perfect physical condition.
    Next I cleaned the old thermal paste from both the heat sink and the CPU, reapplied clean paste, and then re-installed  the CPU. The CPU dropped into the socket with zero insertion force. I re-installed the heat sink and fan, installed the memory, then connected the power cables and fan switches.
    When powered up and run for 3-4 minutes, the processor heat sink is warm, so I think the CPU may be working, or at least it has power. There were no beeps on start up. I again tried to connect mouse and keyboard, and tested the USB ports for a signal. No change from the condition of yesterday - still no light on the optical mouse or keyboard, and no connection to the USB ports on the back I/O panel.
    I can purchase another power supply locally if that seems to be the trouble, but the motherboard and CPU apparently have power. What else can I try?

  • Iweb with new ilife 09 not posting to mobile me

    Help! I just upgraded to ilife 09 and I can't get my site to publish via iweb. I currently have a site up utilizing the old .mac address that published fine through iweb. Now that I upgraded to 09 and I redesigned my website I just tried to publish it and every time I hit the publish site key I get a pop up box from mobile me that says "sign in if a member or become a member". I am already a member and I have logged into my account but I don't know what to do. Why is my site not publishing when it was publishing just fine before I upgraded to the new ilife. Is there something I need to do????? and yes I am running leopard.
    Thanks!

    Quit iWeb.
    Go to System Preferences > MobileMe
    Log out.
    Log in with a funky user name and password. Accept the rejection.
    Log in with your working user name and password.
    Open iWeb, click Publish.

  • Has anybody gotten a RocketRAID 640 working in a Mac Pro?

    I have a RocketRAID 640 I purchased, based on the fact that it "had OS X drivers". Unfortunately l'm running into a bit of a snafu here.
    The English website (www.highpoint-tech.com) shows for the RR640 drivers that "Mac drivers are available at http://hptmac.com/cn". This is their Chinese website of all places (why, if it has Mac drivers are they not listed on the English site?). I recently was contacted by their tech support, and they appear to be totally clueless why their driver isn't working.
    Ya see, the one they link to is this one:
    http://www.hptmac.com/US/productfiles/HPT-Quad-eSATA-mac-v100-100120.dmg
    But it's on the Chinese website. Yay?
    So here's the issue: The .kext file's info.plist shows an IOPCIPrimaryMatch entry of "6441103". Breaking that down, the 1103 is the Marvell 9128 SATA controller (there are two on the card, oddly at x1 link width). The 644 is the ID of the card the driver is looking for in order to load. In other words, the driver (RR64x.kext), from the installer packaged labeled "RR644M" (for RocketRAID 644 Mac), will only see the RR644, but not the RR640 which I have. Unfortunately, injecting the proper IOPCIPrimaryMatch entry into the .kext file renders the .kext useless as it becomes a file that has "been installed incorrectly and cannot be used", because a user (me) modified it.
    Has anybody gotten this card to work in a Mac Pro in OS X (it works fine in Windows on a Mac Pro) other than the inability to use CTRL-H to activate its BIOS configuration utility at bootup)? And if so, what driver are you using?
    I've lost three days worth of work/"fun time" to trying to figure this out. I don't know why the card is so hard to get working, since functionally it's identical to the 644, only instead of eSATA ports they're all internal. Even the controllers used are the same, as is the link width of the card itself (but apparently not the firmware?).
    I knew HighPoint had ridiculously bad support, but their hardware in general is rock solid (once you get it up and running). I kind of want my Vertex 3s to finally run speedy. I'd really hate to have to get a 6Gbps SAS card instead (and it'd have to be bootable which is EXPENSIVE) in order to plug into my Mac Pro 1,1's SAS cable that it uses to control the four internal HD bays (though that would give the HD bays native 6Gbps speed!).

    Highpoint RR Quad eSATA for Mac is sold on Apple Store
    http://store.apple.com/us/product/H1113LL/A
    with 4 favorable comments, from one that flashed the firmware for EFI32 to be bootable (odd, as they said they had "Early 2008" which does not jive), a few with 2010 models.
    Sonnet, FirmTek or other with 6G PCIe controller IF it does not need to be bootable (you said you wanted that); and, you aren’t going to be pushing for really high performance with a single SSD.
    If you want to stay with Highpoint (exchange?) HPT links to Apple product page -
    RocketRAID Quad eSATA 6Gb/s for Mac $249
    http://www.hptmac.com/US/product.php?_index=65
    What I did find were these Highpoint downloads:
    http://www.hptmac.com/US/product.php?_index=57&viewtype=download
    Driver version 1.0 - which you already have
    http://www.hptmac.com/US/productfiles/bios_driver/HPT-Quad-eSATA-mac-v100-100120 .dmg
    There is an EFI zip file, maybe you need to flash yours.
    Highpoint Mac support page: from 9/2009
    http://www.hptmac.com/US/product.php?_index=57&viewtype=download
    Lion compatible products page:
    http://www.hptmac.com/US/categories.php?compatibility=18
    Highpoint Lion Support Mac
    http://www.hptmac.com/US/product.php?_index=57&viewtype=reviews
    Amazon (USA) also sells the same card carried by Apple Store -
    http://www.amazon.com/HighPoint-Quad-SATA-6Gb-Mac/dp/B003MXCZMI/
    Barefeats 6G SSD (ATTO Express R644, RocketRAID 2721) support for 6G SSD
    http://www.barefeats.com/ssd6g02.html
    Barefeats older 3G RocketRAID
    http://www.hptmac.com/PDF/RocketRAID_eSATA_For_Mac_Barefeats_Review.pdf
    http://www.hptmac.com/US/product.php?_index=57&viewtype=reviews
    And what I found about RR640 (I have 620s in my PC but the extra 40 seconds to the boot time and stability were a no-go for me)
    The Highpoint RocketRAID 640 is a PC card (only).
    http://www.bit-tech.net/hardware/2011/01/04/high-point-rocketraid-640-review/1
    http://www.newegg.com/Product/Product.aspx?Item=N82E16816115077
    http://www.highpoint-tech.com/USA_new/series_rr600.htm
    Windows – Linux – FreeBSD driver support (only)
    Apple Community –
    Has anybody gotten a RocketRAID 640 working in a Mac Pro?
    https://discussions.apple.com/message/15909237#15909237

  • Request IDoc : Application document not posted

    I am loading master data in the development system for the first time after the basline config. I am getting the following error.
    Request IDoc : Application document not posted

    Hi
    Recheck the Connectivity RFC & IDOC too. you may ask basis for help.
    verify the IDoc things no problem, connection and authorization between bw and r/3 established well.
    try check in monitoring - menu environment
    -> 'ale management' - in datawarehouse and in source system.
    take a look oss note 520012.
    Symptom
    RSINFO Idocs with status 51 are repeatedly sent to the top. IDOCs with status 51 (document not posted) queue for ALE inbound processing. This may slow down the system.
    Other terms
    IDoc RSINFO, status 51, bd87, we05, RSRQST, R3 013
    Reason and Prerequisites
    The requests are started periodically and cause a R3 013 error message; the message is sent to the BW system but the requests retain a status 51. You can display the IDOCs via transaction we05. Enter RS* in the 'Logical message type' field and execute the process. You can also display the IDOCs with transaction bd87.
    Solution
    IDOCs with status 51 can be selected for deletion by running the 'RBDMANIN' report; do not use the 'Import in the background' indicator (you must manually remove the indicator).
    Each relevant IDOC is then processed separately in the foreground and you can decide for each IDOC if you want to select it for deletion.
    Hope it helps

  • SD Staticall Condition Not Posting Into Accounting

    Dear All,
    Need your help. Urgent...
    My business requirement is to post Staticall condition value in G/L count. For that I did the following config.
    1. V/06: Configured new condition type ZCRL,with Cond. class :Discount or surcharge ,Calculat.type :Percentage and activated for 'Accruals'
    2. Assigned this ZCRL to Pricing procedure with account key and accruls.
    3. Maintian G/L accounts for both account keys and accruls in VK0A.
    However in billing document  I can see ZCRL condition type at Item level with account keys , but not posting in accounting.
    Pricing condition PR00 is posting into account.
    Could some body please help on this.
    Much appreciated your help.
    Thanks a lot.
    Regards,
    Jai

    Hi All,
    Many thanks for your prompt responce.
    In my further invistigation I found this is b'c of  IS-Oil. My client recently upgraded to IS-Oil and SD and IS-Oil table got corrupted.
    In sales order item condition 'New filed get updated i.e Invoice
    Cycle’ , which is coming from IS-oIL table.
    Pls check the below attachment.
    To reslove this issue, need to activate Split invoice cycle at Is-Oil billing document type.
    Much appreciated your help.
    Thanks a lot.
    Regards,
    Jai

  • Posting with trans.type 645 not possible (No acquisition posted) Message no. AA324

    Hello,
    I have post the depreciation of  asset, which is legacy asset & value arise through AS93.
    Now i realized that the i have charged more depreciation. hence While doing Debit manual depreciation of Asset through T code ABAA & using transaction type 645, system showing error message,"Posting with trans.type 645 not possible (No acquisition posted) Message no. AA324".
    Please help us to resolved this issue or any other way to write off the depreciation which is excess charged earlier for legacy asset.
    Thanks & regards,
    Pramod

    Hi,
    According to me you can create a new transaction type which is exact opposite to depreciation key 640 and then with that transaction type you would be able to post the unplanned depreciation by which the asset value will increase.
    Regards,
    Malhar.

  • HighPoint RocketRaid 6GB/s eSATA not launching my RAID 0 drive

    Hi there,
    I have a Mac Pro 3,1 (2008) with 8 cores, 10GB RAM. In 2011, I bought the HighPoint RocketRaid 6GB/s eSATA for Mac RAID card (model number 644MLF I believe). It has 4 eSATA ports. The RAID 0 was initialized with four 1TB external hard drives (WD Caviar Black in Startech eSATA / USB enclosures). I'm running Lion operating system (whatever the latest 10.7.x).
    Unfortunately the RAID management is software based and I was alwasy suspecious about that because Disk Utility doesn't do much with setting things up or manipulating, restoring, etc.
    Anyway,  I was running smoothly. One time I had a fail to launch after the computer accidentally went to sleep mode. I restarted it and after a few attempts it worked.
    I wasn't happy with this kind of odd behaviour but I thought I would never let it sleep again. But about a month ago it happened again and whatever I did, I couldn't make it to launch my RAID drive. It makes that sharp continuous beep sound and the system becomes very unstable unless I turn off the drives or even take the RocketRAID card out of the system.
    The problem is I had it for RAID 0 since I was working on whole bunch of uncompressed full HD footage and I needed to maximize the smooth image. I thought eventually I buy a 4 TB drive as a backup connect it to my Time Machine and it backs up the RAID 0 that way but 4TB drives are (were) not out when I did the setup and I was too optimistic running my assets without backup in this time period.
    Anyway, long story short, I'm now stuck in a situation that I don't want to completely re-initialize my drives because most probably I will loose my content (anyone that knows this please comment). I went to Apple store, they tested the drives and said they are fine, and they can't do anything with the RocketRaid card since it is a third party hardware!!! So someone tells them why do you sell it then!!??
    I tried to get a hold of HighPoint tech support but they don't answer any tech calls. I filled out a web based support form. I doubt they can give me direction by emails back and forth.
    Anyone had that experience before? Did you manage solving the launch problem? How?
    Thanks for your help.

    buy some wd black 2TB drives for soare and backup, and even 3TB greens.
    so you are using Apple DU software RAID and initialized with Lion is fine.
    the drive enclosure is _______ ?
    $140 http://www.softraid.com is a good product and feature set, can also take-over an Apple array. demo and manual, and email support at softraid.com they do respond in spades, and makes it worth buying if it sounds good.
    HPT support is iffy, it has new 10.7.5 driver? or do you need to dual boot and get out your 10.6.8 system clone? and SL has no issues but 10.7.x on 2008/3, 1 doesin terms of power mgmt. you could try another lion clean install to test but some had to go back to 10.6.8.

  • Posting to G/L accounts with open item management not permitted Fagl_post

    Dear Expert,
    When i run the foreign cur rev. through FAGL_FC_VAL then system is not post the currency rev on open item on GL account.  It showing subject message and also show below mesaage:-
    Message no. FAGL_POST_SERVICE012
    Diagnosis
    You use GL account 210012 in company code 1000 with open item management. However, posting  are not permitted G/L accounts in individual ledger with open item management.
    Please advice on this issue.
    Thanks & Regards,
    Pankaj

    Hello Pankaj,
    Is your adjustment account was defiined as OI management. if yes, then t is generally not permitted to use the O/I managed account as an djustment account. The adjustment account is the same as O/I
    managed GL account, so the error message FAGL_POST_SERVICE012 is issued. This is justified because open items must be made valid for ALL ledgers in the client but FAGL_FC_TRANS posts ledger specific posting by having ledger group in the document header - Ledger Grp 0L.
    The best solution is to assign non-O/I managed account as an adjustment account, and this is the 'standard' solution.Please also check note 884639.
    Best Regards,
    Gladys xing

  • Invoice verification is not posted with T.Code MIRO

    Hi Friends,
    1)
    I created a purchase order with T.Code: ME21N, and Enter Goods Receipts with T.Code: MIGO after that Invoice verification with T.Code:MIRO, but it is not posted:
    Error Message is: Error in account determination: Table T030K Co.Code: RK01 VST.
    2)
    Balance not zero 5000, debits 5000, credits 10000
    for the second purchase order step 1 repeated.
    Please help inthis regard,
    thanks
    ramesh.

    Hi,
    I think there might be some configuration missing with regard to the tax.
    You ahve assign a GL account ot the TAX code for the Transaction Key VST.
    Menu Path: SPRO - > Financial  Accounting - > Financial  Accounting Global Settings - > Tax on Sales/Purchases- > Posting - > Define Tax accounts .
    Thakns
    kiran

  • While  F-92 posting with T type 210 not possible  (No acquisition posted)

    Hi
    Asset Retirement Not Possible
    We have uploded legacy data in our Production server on 01.04.2010.. after that we have to sale one of them asset .
    I am using T.code :- F-92 .. but i couldn't sale that and system gives me error
    Posting with trans.type 210 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
    Ajay
    yes we are using Group Assets for income tax depreciation
    when checked at AS83 no values found under taken over value for the group asset
    ***. aquistion val  - 0
    and all other values are zero
    Edited by: johnrambo on Oct 4, 2010 12:09 PM
    Moderator: Don't repost threads which were locked by moderator

    Hi
    As I said, go to AS82 and upload the Income tax values for this group asset....
    Unless you do that, system wont allow you to proceed.. May be you can enter a nominal value if it is important to sell the asset now and later on correct it
    Regards
    Ajay M

  • Error : Posting with trans.type 200 not possible (No acquisition posted)

    Dear All,
      Iam getting error while doing asset retirement thru ABAVN. Error is mentioned below. Pls do the needful.
    Posting with trans.type 200 not possible (No acquisition posted)
        Message no. AA324

    Dear Bird,
      Already asset has been posted , but then also it shows the same error.
    pls help on this.
    regards
    Ranjit..

  • Asset Retirement (ABAON) error - Posting with trans.type 210 not possible

    HI All,
    I was trying to sell an asset using transaction ABAON which is fully depreciated, but I am getting the error -
    " Posting with trans.type 210 not possible (No acquisition posted)"
    The Scenario is, there is an asset(car) which was uploaded during implimentation and it got depreciated fully in the month of april.
    The same asset(car, which is fully depreciated) is sold for an amount of Rs 40000/-.
    So, I was trying to post it with some revenue vlaue in transaction ABAON, but I am getting the above error.
    (The Asset value was an uploaded during implimentation,it was not an acquisition value from SAP. It was an uploaded value from legacy data)
    Could any one help in this, or let me know the correct process for this kind of transactions.
    Awaiting for a reply.
    Regards,
    Upendra

    HI Mamta,
    Thanks for the reply.
    While Uploading the data was uploaded as asset balance upload for prior year with value.
    Plase let me know what do you propose, to be done for this.
    Regards,

  • FI _AA errr Posting with trans.type 210 not possible (No acquisition posted

    Asset Retirement Not Possible  
    Dear,
    We have uploded legacy data in our Production server on 01.04.2010.. after that we have to sale one of them asset .
    I am using T.code :- F-92 .. but i couldn't sale that and system gives me error
    Posting with trans.type 210 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 210 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
    Can anyone Help on this topic
    Regards,
    rambo
    deleted
    Moderator: Please, search SDN*

    Hi Rambo
    I think you are using Group Assets for income tax depreciation
    If yes, have you uploaded values into Group assets from AS82? Can you please check this and revert
    Regards
    Ajay M

Maybe you are looking for