H8-1070uk upgrade to gtx 970 wont boot after bios

Hi all,
im after some advice is possible.
I've got a h8-1070uk which im trying to upgrade the video card on, from gt545 to gtx970. My bios is v7.12 and im running it on a jeantec 800w psu.
the issues i have is that when the new card is installed it gets stuck on boot on the bios screen.
the msi and geforce forums, as well as the company i bught the card from, suggest this pc is capable of running this card so would anyone have any suggestions ?
Thanks in advance

PeterBurns wrote:
Hi all,
im after some advice is possible.
I've got a h8-1070uk which im trying to upgrade the video card on, from gt545 to gtx970. My bios is v7.12 and im running it on a jeantec 800w psu.
the issues i have is that when the new card is installed it gets stuck on boot on the bios screen.
the msi and geforce forums, as well as the company i bught the card from, suggest this pc is capable of running this card so would anyone have any suggestions ?
Thanks in advance
Hi,
What make is the card? The chipset is nVidia but what's the manufacturer? I have seen a similar issue on a Sandy Bridge desktop with a nVidia vga before.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Similar Messages

T540p wont boot after bios update

I updated my T540p a few days ago using Lenovo Solution centre, hiwever, it cant boot after update. The power button is on and fan spins, but the screen is black. I tried: remove battery and all external device and press power button for 30 seconds, out back the battery, still screen wont show anything; tried usb recovery stick, didn't work; tried Recovery discs from Lenovo, still failed.
Please help. Thanks in advance.

Ouch. And just out of luck.
Chances are, the board is bricked.

K9N Diamond - Wont boot after BIOS update

Just attempted to update the BIOS on my PC and it now wont boot. Used LiveUpdate with the Windows flash option (don't have FD drive). The lights on the D-Bracket 2 get as far as LED 2 Green, 1,3,4 Red. I have already tried to Clear CMOS with no joy.
Any suggestions on how to proceed much appreciated - and yes, I already know, I've probably done something stupid
Thanks
Grant.

Quote from: BOSSKILLER on 25-March-07, 19:22:15
power down PC, remove power cord from the PSU, push several times power button to drain capacitors, then Clear CMOS and leave only one memory stick into DIMM slot close to CPU socket. pull back power cord and try to boot.
in a future do not update the BIOS for no reason....(only becouse its new, only becouse new BIOS maybe got a new logo and e.g...)
Looks like I'm back in business now. I found similar instructions at this location http://www.bosamar.com/K9N/trouble.html and followed the First Procedure.
Booted ok with one mem stick, in bios fail safe mode. I counted 7 short beeps while booting then one long beep. Not sure if this is ok. Read about bios beeps here https://forum-en.msi.com/index.php?topic=82221.0 and the final long beep seems to indicate a pass???. Anyway, Vista appeared to come up ok and I checked everything in the hardware device manager and all looked fine.
Proceed to reboot with all mem sticks back in place, again same beeps but Vista coming up ok.
Next I switched bios to optimized defaults, but now 6 short beeps - no long beep. Windows looks ok. 6 beeps appear to indicate a keyboard problem, but kbd seems to work fine???
System looks ok now, but not sure if i should look into those beeps a bit more? BIOS now at 1.3, should I leave as is or revert to an earlier revision?
One thing I know that I am going to do is to install the FD drive from my old PC
Thanks for all the help.
BTW, the reason I did the BIOS flash was as a last resort to get my sound to work. Tried the various creative driver as suggest elsewhere on this forum but without success (as of yet there is no official vista compatible audio driver for my mb from MSI). The JAUD1 connector looks to be connected as specified in manual (but no audio from either the front nor real panel audio connectors).

K7n2-L wont boot after bios upgrade

I have been very happy with the motherboard since i bought it in april 2003, been very stable and only had minor usb problems. And i finally decided to upgrade the bios from v. 3.7 to v. 4.1.
After the upgrade the machine boots up to the first windows that shows me the memory and the hard disk i have installed. I can also go into BIOS.
But the PC stops when its about to start booting up the HD or CDrom. According to the lights on the D-Bracket its trying to initializing the floppy controller.
There has never been a floppy drive in this PC before(i booted the PC on CDROM when i upgraded the BIOS).
I have tried the following things without success;
installed a floppy drive.
Cleared the CMOS(with the jumper)
Unplugged the cdrom and the hard disk.
Tried every memory configuration.
jumped the safe mode jumper.
It seems to me that i can only fix this by changing the BIOS chip....or the mainboard.
Anyone had this problem?

Azraeliz,
Sounds to me like perhaps you've overlooked a setting in the BIOS
Did you take note of the BIOS settings prior to flashing so you could put the settings back the way they were?
nuckelavee,
I suggest you start your own thread. I have a hard time believing there is no CMOS jumper.
Tried this? ***Starting your K7N2 Delta2 at default settings***

PC wont boot after BIOS Upgrade

I have a K7T266 Pro2-RU motherboard, which had BIOS 3.2 on it but I used Live Update to go to 3.6. Since I did this, my conputer boots to showing the ide devices and then the chart of info on screen, but does not go any further. The D-Bracket shows a "Assign Resources to all ISA". This board does not have ISA???? Any help on what I could do would be appreciated.

Hi,
Clear the CMos....

Laptop wont boot after BIOS update

Hello
i have a compaq CQ61-303SV laptop
i tried to update the BIOS and i download the file form the hp driver and support website
after i update the BIOS the laptop wont to boot and stop on a black screen
what to do please ...

Power down the notebook, disconnect AC adapter and remove the Battery, hold the power button down for a full 30 seconds, connect AC only, hit the power button and see if windows will load.

Z50-75, wont boot after bios update

Hi to all!
I just baught Z50-75 with AMD FX7500, 8GB Ram and FreeDOS. I installed Windows 8.1 Pro, and they pulled some drivers during the installation, and I went to Lenovo sight and downloaded all the rest (graphics, camera, etc.), after each installation the computer restarted normally and all was O.K. The last drivers that I saw on the site were BIOS drivers, and I downloaded those to and it started the installation after which it said:"The system will now restart for changes to make effect", and it did, but, it would not boot up after that, all it did was show me this on the screen:
And I tried both of the options (the second one with the Windows CD inside), but it just stays where it is, no effect.
I can enter the bios and change the settings, but none of them seem to work because this is the maximum where it will go, the only difference is when I change from AHCI to Compatible mode, it restarts and than I have a blank screen, I have to use the One button Recovery to get back to this one from the picture above...
I would appriciate any kond of help, please give me some advice.
Solved!
Go to Solution.

Someone else posted about a similar problem. I will give you the link to their post and you can decide if it is something you want to try.
http://forums.lenovo.com/t5/Windows-8-and-8-1/black-screen-after-2-reboot/td-p/1738899
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Xp wont boot after bios update with dualcore amd 4200+ (k8n-neo2 platinum)

after flashing the bios (xp already installed on a sata stripe array)
xp wouldn't boot anymore ... ik had to flash the bios to be able to
use my amd x2 4200+ ...
so I tried to instal xp freshly on the sata raid ... hangs when it restarts to instal devices ... nothing would help diffrent drivers , basic bios settings , all pci cards removed and switched of everything i could in the bios to get a really basic setup
to instal ... no help whatsoever ...
now if i try to instal on a normal ide everything works like a breeze ... dual core , raid , everything ...
personaly I suspect either the windows instal stuff to be the problem with dualcore
but even more the nforce drivers since they have not been updated since june 2004 ...
can someone help me out please ???

Quote from: Budwise on 22-September-05, 13:08:34
try 1.B
If you check in his sig he is using 1b.
Quote from: Wonkanoby on 21-September-05, 15:36:21
there are newer nforce raid/ide drivers thasn that
http://www.nforcershq.com/forum/nforce4-driver-812-vt62037.html
His board is a NForce3. Here is the actually link for the drivers. http://www.nvidia.com/object/nforce_udp_winxp_5.10.html These were released September of 04 and it was stated
Quote from: NForce Release Notes
# Storage Driver Improvements:
* RAID Morphing
* Improved RAID Interface
* RAID spans both SATA and PATA devices
* RAID 0, 1, and 0+1
* Improved handling of various storage devices
Unfortunately I don't know how to get the correct files to a floppy to get windows to use them in the install process, but hopefully someone here does.
Good Luck
Jeremy

Pavilion g6t wont boot after bios update now just black screen please help!

I downloaded an update for the bios for my pavilion g6t-1d00 laptop running windows 7 64 bit. It started acting kind of funny but I didnt think anything of it til I tried to boot it up the next day and all I got was a black screen and a orange led light on the f12 button for the internet and the caps lock button after blinking afew times started the dredded two times every couple of seconds. I tried the windows key+B key power key, no luck. I cant access anything because I have no monitor and I'm at my wits end. I refuse to wipe my hard drive and start over even if I could! I cant access hp tools or manager or anything, please someone has to have a solution!

@Fuschia4me,
1.       You will have to use another computer
2.       Access the HP.com site with the BIOS updates available here is the link
3.       You want to select the F.36 BIOS version
4.       When you click on the update then click download and it will ask you to save or run, you want to save to a flash drive
5.       Once done insert the flash drive into your laptop
6.       Turn the computer on and press the windows and B key like before
If the process doesn’t work the first time I would try at least 2 more times.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Pavilion m9500y wont boot after bios update

Hello Everyone,
I have a m9500y desktop that I recently did a bios update on. The update seemed to go through just fine but then when it rebooted it ended up beeping a few times and showed only a black screen. I removed the power cord and cmos battery and tried to power on after putting them back. It came back to the boot screen and hitting f10, it says "Entering Setup" and a flashing cursor, but doesn't get passed that. Is there a way to get into some recovery mode and reflash the bios again?
Thank you in advance for any help.

Hi,
There is one HP BIOS update available for your PC when using Win Vista 64 bit.
Is this the update that has failed? Did you attempt this BIOS update running a different version of Windows?
It may be possible to mod the BIOS update per above and flash again. Another option is to have HP reflash your PC's BIOS. The cost to have HP fix may not be worth it given your PC's introduction date in 2008.
This site may provide some help. Check out BIOS Recovery. Current HP PC's use AMI BIOS. Your PC may have an Award BIOS.
Or you could contact a local PC tech for assistance. The tech may be able to reflash the BIOS at a lower cost.
There is no easy fix for this problem.
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
Errare humanum est.

G550 wont boot after bios update

Hi i installed Windows 7 on the lenovo g550 and was getting the latest drivers and got the 2.53 bios. i got the message that bios flash was successful and then gave timer till reboot. The power light is on and the fan is spinning but nothing shows up on the screen. Luckily i did backup the bios onto a usb but now how do i go about flashing the old one back on.

If you have to, just hold down power button until it shuts off.
Remove battery and wait one minute.
Replace battery, and plug it in.
Enter bios on boot and "load default settings".
If you can't get into bios, post back.

HI my Ipad Upgrade to Ios7 but wont boot up

HI
my Ipad Upgrade to Ios7 but wont boot up , and when connected to the itunes 11 show IOS7, HI my Ipad Upgrade to Ios7 but wont boot up , and when connected to the itunes 11 show IOS7 but hanged in apple logo
I wait for 7hours but it cant loaded.

If the reset doesn't work, force the iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Wont boot after windows update

M y Sateite A305 s6916 wont boot after windows updates tried to install.

Satellite A305-S6916
tried .. every option on F8
Try this. Download a repair disc from here.
   Windows Vista Recovery Environment ISO X64 version (64 bit)
If you can reach the Recovery Environment by booting that, try the Startup Repair and let us know what happens. Sometimes you need to run it more than once.
   Startup Repair: frequently asked questions
Also try a System Restore.
   What are the system recovery options in Windows Vista?
-Jerry

Satellite Pro C850 wont work after Bios update

my satellite pro c850 cd wont work after bios update from toshiba.
what do i do?

Saying: dont work you mean it does not power up or what do you mean exactly?
Did you flash the BIOS properly?
Possibly something went wrong during the update and this means that ROM module isnt flashed properly
In most cases a special BIOS crisis disk would be needed to get it working
Not quite sure if you can get it fixed by your own
Check this thread. Maybe it helps:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
Otherwise you need help from authorized service provider available in your country.

Satellite A105-S2001 wont boot after memory upgrade

I just tried to upgrade my memory from 512mb to 2 gb using 2 1gb memory chips from crucial. When i insert both memory chips at the same time my laptop wont boot, it'll attempt to but stop in the middle of the process and try again 5 or 6 times. Nothin shows up on the screen. The same thing happens when i put only one 1gb chip in. When i put my old 512mb chip in and one 1gb chip the computer boots but only recognizes 960mb or ram. i also updated my bios.
thanks

Sounds like incompatible memory. Fortunately, Crucial is very good about honoring their compatibility guarantee so you should be able to get them exchanged. You can get very strange results with incompatible chips due to the differences in timing specs. That would account for what you're seeing. I assume it works normally if you have just the original 512MB chip in place.

H8-1070uk upgrade to gtx 970 wont boot after bios

Similar Messages

Maybe you are looking for