H97 Gaming 3 - Audio Problem

Hello, I have a problem with the audio of my new MSI h97 gaming 3
The audio works, but is distorted.
I have already installed the latest realtek audio driver (6.0.1.7293)
I have already tried to change headset.
Hardware
Mobo: MSI H97 Gaming 3
CPU: Intel Core i5-4690
RAM: G.Skill Ares
GPU: MSI GTX 970
PSU: XFX 650w 80+ Gold
SSD: Samsung 840Evo
HDD: WD Blue
OS: Windows 8.1 Pro

Quote from: darkhawk on 29-November-14, 21:40:04
I understand you aren't using Linux, but this might be helpful....
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1321421
In particular, https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1321421/comments/21
Apparently there is an issue with the Intel PCHs and this audio card specifically. I'm not sure it's 100% related, but I figure it's worth mentioning.
Possibly this is also related: http://ubuntuforums.org/showthread.php?t=2027573&p=12109016#post12109016
It sounds like there is an interrupt issue that could possibly be solved by not allowing the CPU to change C-States.
Or it could properly be solved via drivers I believe.
I would contact Realtek about the issue.
Sorry but i can't understand this solution.

Similar Messages

  • Z87 g45 gaming audio problems

    Hello.
    Fresh win 7 installation. When i install realtek audio driver and click on the speaker near the watch, windows audio disables. If i uninstall them, windows finds and install the audio driver and all works. I tried several realtek drivers. Th cd ones, the drivers on msi site and the ones on realtek site. All gave me same error.
    Then i tried to uninstall the video card since i use the hdmi for sound output and tried other sound output. Same error.

    DIMM1, DIMM2 work great solo. 3 and 4 no boot, no beeps, nothing. Reseated the CPU while I was messing around down there.
    So I don't know at this point. Bad board? Reading the stickied, would an outdated or improperly updated Intel Mangement Engine cause something like this? (since I didn't even know what the ME part meant in the bios till I read it on here).
    So I'm out of ideas right now. Unless you think a new bios would work https://forum-en.msi.com/index.php?topic=169943.0, the later ones than the "current" version on MSI's site has a lot of memory fixes/changes so maybe that? Other than that I can only think to RMA it.

  • Creative Gaming Audio & the EAX2 R

    Partially as a response to this thread about "Onboard sound versus X-Fi review/shootout?"...?http://forums.creative.com/creativel...message.id=430?... this post further expands the subject of on-board sound on to gaming & continues deeper into the needs/wants of a "gameaudiophile".
    [color="#ff6600">- GG's!?Even though the link below points to an old article / review from 2005 03 07, it might give people here some guidance in finding their temporary way back to the still not so old HDA on-board sound until Creative's driver technologies see a brighter day. Intel High Definition Audio Aricle on the C-Media CMI-9880 & Realtek AL C880
    http://www.behardware.com/articles/5...ition-dio.html?-------------------------------------------------------------- - Now I'm a pretty frequent gamer who have come to rely heavily on Creatives post EAX2 systems in regards to great positonal audio, doppler effects etc. As we all know, EAX on the higher notes is TBA & ETA unknown for the time being. This gives us time to fool around with eventual on-board stuff. So I did & let me tell you that the Sensaura 3DPA, which is implemented on the CMI-9880 (on my ASUS P5AD2 Premium MOBO) does not come close to a love affair. Setups for up to 7.CH is at your disposal, virtual modes as well. 6 Ds3D voices , EAX-2 & Jack Sensing... It's all working as in runnig but just doesn't reach any particular high.
    [color="#ff6600">Gaming Audio & the EAX2 Roof?Some of you might wonder what my nit-picking about EAX is about. You might not be a gamer. The regular mp3-cowboy regards EAX to be merely a bug. You simply have to hear it in a game, preferably an online-shooter where picking up enemy footsteps & sounds etc are the difference between knowing where to turn your sights or getting it in the back. It's about anticipation as well as immersion. The EAX3+ modes make a huge difference in those regards. For many gamers, the importance of audio quality & positioning might not be clear when first starting out with a game. But as they grow into it, get accustomed with their surroundings, they start to notice & realize how important audio really is. Many of my friends who I have lured into gaming over the years have often been astonished by the difference between on-board audio solutions & the Creative addon cards. Then amazed about what miracles a good headphone setup can do. The real jaw-droppers were the higer EAX modes. EAX became their "eyes on their back". To put it bluntly: Gamers are a new but different breed of audiophiles. We are not content with movie-style directional audio alone, we also demand depth, distance, elevational sound possibilities. True 3D audio. EAX has been the best answer so far as to keep us somewhat happy. No EAX, no satisfaction. Part of the problem is that we have always been trusting Creative to keep deli'vering, and they probably will. But what if, just if, we would like to step out & try something different for a change. Just to know that some other company might do it just as good for us? Well, the options aren't many & they're limited.
    [color="#ff6600">Other Cards, Other Technologies
    Thats why it would be very refreshing to catch some reflections from someone about positional audio in different high-end gaming setu
    ps.
    Anyone running the AuzenTech X-Meridian 7. card for instance? I understand the X-Mer being very high quality as far as everything besides gaming is concerned. Reading a lot of reviews, primary concern would be the "higher than X-Fi" FPS hit - what is your real-world experience outside of the constructed RightMark 3D tests? Audio positioning / doppler? How does the Dolby Headphone, Dolby? Pro Logic IIX, Dolby? Digital Li've, DTS? Interacti've & DTS? Connect technologies hold up against their Creative counterpart EAX3-5, CMSS/CMSS2 etc? IMHO, EAX2 alone is not good enough & does not cut it when it comes to fast FPS-games. Maybe some of you have had first-hand experience with the Razer Barracuda AC- card instead? The reviews tell me a story about "nice first try" for Razer, considering it's their first shot at serious gaming audio. Positional is mentioned to be somewhat over optimistic etc. As I understand it, their "EAX3-and-up-killers" are called Razer Fidelity?, Razer Enhanced Sonic Perception? (ESP) architecture and Razer?s 3D (720?) Positional Gaming Audio Engine?. Any hardcore gamers tried it's?Of course, both the X-Mer & AC- utilize EAX2, but as I mentioned.., that's an obstacle to get around for the companies serious about getting gamers to migrate from Creative. It's simply not enough for some of us The substitute technologies must at least come very close of making up for the lack of EAX3-5. Many reviewers barely touch the gaming audio aspects of the tested card, simply stating that "it's adequate enough" (?!!). Well.., that might not hold true for those of us who expect to invest several more hours on virtual battlegrounds than playing mp3's or mixing etc.Happy hunting!
    -------------------------------------------------------------- - Auzentech X-Meridian 7.
    http://www.auzentech.com/site/products/x-meridian.php?Feature-by-Feature Sound Card Comparison
    http://www.auzentech.com/site/support/Gaming.php
    http://www.auzentech.com/site/support/Audio_Quality.php
    http://www.auzentech.com/site/suppor...c_Playback.php
    http://www.auzentech.com/site/support/Connectivity.php?Auzentech X-Meridian 7. Reviews
    http://www.guru3d.com/article/content/399
    http://www.cluboverclocker.com/revie...dian/index.htm
    http://www.driverheaven.net/reviews/auzentech/index.php
    http://www.elite*******s.com/cms/ind...=282&Itemid=27
    http://www.nvnews.net/reviews/auzent...an/index.shtml
    http://www.reghardware.co.uk/2006//2...ech_x-meridian
    http://www.avsforum.com/avs-vb/showt...&&#post9339200
    http://forums.anandtech.com/messagev...threadid=88528?X-Fi Elite or X-Meridian
    http://www.avsforum.com/avs-vb/showt...37&page=&pp=30?-------------------------------------------------------------- - Razer Barracuda AC-
    http://www.razerzone.com/Products/Ga...ing-Sound-Card?Razer Barracuda AC- Reviews
    http://www.virtual-hideout.net/revie...AC/index.shtml
    http://www.modders-inc.com/reviews-story--62.html
    http://www.ocia.net/reviews/razerbar...dio/page.shtml (Sponsored by Razer)?-------------------------------------------------------------- - [color="#ff6600">Great Headphone Stuff Baby!?HeadRoom - Headphone Amplifiers
    http://www.headphone.com/products/headphone-amps?HeadWize - A Quick Guide to Headphones
    http://headwize.com/articles/hguide_art.htm?HeadWize - Technologies for Presentation of Surround-Sound in Headphones
    http://headwize.com/tech/sshd_tech.htm?HeadWize - Judging Headphones For Accuracy
    http://headwize.com/articles/judging_art.htm?HeadWize - Preventing Hearing Damage When Listening With Headphones
    http://www.headwize.com/articles/hearing_art.htm?HeadWize - The Elements of Musical Perception
    http://headwize.com/tech/elemnts_tech.htm?Aureal - 3-D Audio Primer
    http://headwize.com/tech/aureal_tech.htm?Ethan Winer - Audiophoolery
    http://www.ethanwiner.com/audiophoolery.html?HeadRoom - The Psychoacoustics of Headphone Listening
    http://headwize.com/tech/headrm_tech.htm?Sensaura 3DPA (3D Positional Audio)
    http://www.sensaura.com/technology?-------------------------------------------------------------- - [color="#ff6600">H4rl3qun?s Audio Setup? |? Creative Labs SoundBlaster Audigy 2 ZS? |? C-Media 9880 High Definition Audio Device? |? Sennheiser HD 650 Reference Class? |? Sennheiser PC55 USB? |? Sony MDR-V700DJ? |? PreSonus HP4 Headphone Amplifier? |?

    Danke Cat.., but it's pretty much just a pure love letter to honey EAX, who happens to be sorely missed by my big rig if you manage to take notice? - Not dangerous at all really since Creative will hopefully outperform the competition anyhow in the end, right? I'm counting on it anyway. In general, these OS-shift problems currently stirring up are most likely a passing thing; taking audio & audio technology more into the spotlight than anything else. - Which is a good thing for Creative as well (handled nicely), promise, & so is acknowledging / discussing differences between soundcards.
    If you are referring to the reviews as inhibiting some sort of advertisement character then yes, advertisement leaning towards Creative since none of the other products have been able to outperform any of the Creative cards when it comes to the topic of gaming ^^ as of yet. Many also use Creative cards as reference in tests, link to & publish Creative specifications etc. Does not necessarily have to be a one way street. Or do you perhaps mean that it's not ok to namedrop? Or hyperlink? Ahwell.., I should have read the manual I guess.
    As marshall_lai also kindly pointed out, there is also a huge business opportunity helping lesser incorporated to implement EAX+ & technologies in a proper manner!
    Anyway.., Parental Advisory & brainpower recommended in any reply & Enjoy!
    :P

  • Adobe Premiere Pro CS5.5 Audio Problem

    Hi guys kinda new to Premiere pro, but first time this has even happened to me.
    See f ica explian this well.
    Ok so i've been editing up loads of gaming footage late all from my Hauppauge Gaming Editon 2. Never had a problem till now, there a clip for some reason the audio is so crazy out of whack its impossable to even try and resync you're self. Like there some bit of it where the near end of the clip auido plays in the for 3 mins then it goes back to being like 20 seconds out of sync. It plays fine in Windows media player and quick time but in adobe it goes NUTS!
    All the other cilps are fine just this one clip has gone crazy on me.
    Any ideas how to fix this.
    Ask away and i'll answer everything i can to the best, need to get this fixed to get this video finish asap...
    Thanks.

    yea i am using the right sequence
    here are 4 screen shots of 2 different things i was editing, both used to record my xbox 360 with Hauppauge, Seems adobe is the only program playing the video file with the audio out of sync/mixed up
    [URL=http://imageshack.us/photo/my-images/803/screenshotlrh.png/][IMG]http://img803.imageshack.us/img803/1669/screenshotlrh.png[/IMG][/URL]
    [URL=http://imageshack.us/photo/my-images/826/screenshot2yv.png/][IMG]http://img826.imageshack.us/img826/3012/screenshot2yv.png[/IMG][/URL]
    [URL=http://imageshack.us/photo/my-images/841/screenshot3aa.png/][IMG]http://img841.imageshack.us/img841/7042/screenshot3aa.png[/IMG][/URL]
    [URL=http://imageshack.us/photo/my-images/5/screenshot4on.png/][IMG]http://img5.imageshack.us/img5/6096/screenshot4on.png[/IMG][/URL]
    The Yellow Devil May Cry video is the video with the audio problem,
    The metal gear rising video is red because of the pic above it, and the sound works ok on that, infact that video is finished and uploaded to youtube now.

  • H97 Gaming 3 MS-7918 vs. Nvidia Geforce GTX 750 TI

    Hellou Hellou
    Firstly my Speccs_
    Motherboard:
    H97 Gaming 3 MS-7918
    msi.com/product/mb/H97-GAMING-3.html#hero-specification
    Graphic Card
    Nvidia Geforce GTX 750 TI
    msi.com/product/vga/N750Ti-TF-2GD5OC.html#hero-specification
    Is this two Supported i mean is that Motherboard Supported to my Graphic Card.
    I mean that PCI 16X 3.0 Express thing.
    Because i have impossible to get those to work? The game Crashes when i am playing and it's very laggish and pixels are messed.
    Motherboard is NEW and Graphic Card is 1-2 months old.
    I have tryet everything. New drivers to old drivers.
    So is the Graphic card broken or is it that Motherboard is not supporting that Graphic Card?
    Thank you very muh from Finland

    Oookkey good to know this that it's supported.
    Then i think that Graphic card is broken. Have to send it back to the shop where i bought it and get new one.
    Problem was that the Graphic card is not working. It's crashing when playing games or starting to play games.
    Some times there comes message " nvidia kernel mode driver stopped responding "
    Comes black screen, but i can go to desktop ctrl alt delete to shut down the game.
    Right now i use older Graphic card "Geforce GTX 460" and it's working very good with the mother board.
    Or it's possible, that i have do something to the graphic card to get it to work. Overclocking or something, because the Default settings aren't working.. because right know it's not handelling the job :D

  • Audio Problem since upgrading to Mountain Lion

    Has anyone encountered audio problems with their iMac?  I just upgraded to Mountain Lion on my i7 27" with 16GB of Ram and found that the Audio starts to get distorted and eventually cuts out after about an hour!  It starts cutting in and out when I move the mouse and eventually there will be no sound at all!
      Sometimes it can take over an hour of steady use, my last time was watching a movie on Netflix.  I initially noticed this using a USB DAC Headphone Amp.
    I never had any Audio problems before, my machine is over 1 year old.
    I enjoy watching movies in iTunes and DVDs, but this is making it difficult!  A full restart usually fixes the problem for a time but it will eventually come back
    I'm seriously thinking of going back to Lion for the time being and seeing if it is a Hardware problem.

    i don't know if mine is the same issue, but i had no sound through any of my applications after upgrading to mountain lion.  here is what i had to do to fix it:
    -- applications > utilities > audio midi setup > UNmute all options under "built-in output" (they were mysteriously muted)
    Also, I noticed that the options for "use this device for sound output" and "play alerts & sound effects through this device" were no longer assigned to my Built-in Output device.  They were assigned to some other random sound driver.  To fix, i right-clicked on Built-in Output and reassigned those items to my built in speakers.  All fixed now!
    very weird problem, though.

  • Can Apple fix the 12 bit audio problem once and for all?

    I have had persistent audio problems from I Life V3 all the way up to I Life 06. Sometimes it is synch issues. Sometimes it is audio dropping out. I have been through the various forums and applied the various remedies with some successs, some failure. The basic problem is that I have an extensive quantity of Mini DV tapes dating back to 1997, most recorded with 12 bit sound (prior to 2002). Apple's basic stance has been, you must use 16 bit sound or I Movie and/or I DVD won't work and . And proposes awkward workarounds. Basically placing the onus on it's own consumers. Why can't 12 bit sound support be included in I DVD 06 and these persistent audio issues put to rest once and for all? Is there some overwhelming technical reason why it cannot be done?

    I don't know about overwhelming, but the DVD specification (which was not developed by Apple) calls for the audio to be sampled at 16-bit/48KHz (I think you might also be able to use 96KHz as well). This is what the software expects. If you choose to use another sample rate then the software may or may not be able to "fix" it in post. The real problem is that many camcorder manufactures set the audio to 12-bit by default.
    Mike

  • HOW TO FIX NO AUDIO PROBLEM IN FLASH (4 SOLUTIONS)

    This solution is for WINDOWS ONLY!!! Unfortunately I believe
    it is a bug in flash itself as I have read more than one instance
    of this same no audio problem occuring on MAC'S and LINUX based
    systems as well. IF YOU KNOW OF SOLUTIONS TO THE MAC OR LINUX BASED
    PROBLEMS, PLEASE POST THEM IN THIS THREAD.
    Description of the problem: Video sites such as YouTube,
    VideoSift, Break, Google Videos, Yahoo, and a plethora of others do
    not stream embedded audio. Viewing a YouTube video, for example, on
    VideoSift.com results in the video playing back with no audio.
    However, by going directly to YouTube and playing back the same
    video, it appears to work.
    THERE ARE SEVERAL POSSIBLE SOLUTIONS.
    Problem: You may be missing your WAVEMAPPER driver.
    Cause: Wavemapper driver was removed during installation or
    updating of the Flash Player. It might not necessarily be Flash
    that removes it but apparently something does.
    Solution #1: Google "Flash No Audio WAVEMAPPER" for
    directions, its been covered a bunch, but basically requires
    running REGEDIT and readding the WAVEMAPPER key to the appropriate
    location and value in the registry. Its not as difficult as it
    sounds.
    http://weyland.be/wrdprss/index.php/2006/08/22/no-sound-in-macromedia-flash-player-9/
    if your wavemapper key is installed correctly...
    Possible Cause: Corrupted or damaged flash content preventing
    audio streaming from working correctly.
    Soltuion #2: Run CC Cleaner and delete only cached Flash
    content. It is a free program, again just google "download CC
    Cleaner". This particular solution worked for me.
    If CC Cleaner also does not work, the description of your
    problem may differ slightly. In my case on several computers, one
    day it worked, the next day it didnt. If it never worked, this
    would be a logical solution for you. One variation of this that I
    have found is to create a new Windows User Account and log into it.
    The reason the CC Cleaner method may work better is that the User
    Accounts have their own separate cache folders so a corrupted cache
    preventing audio playback on one profile will not be available on
    the other User Account to cause the same problem. I wont explain
    how to do this as the CC Cleaner will work better but if you are
    curious, yet again google "create new windows user accounts". I
    have also seen this method work on one of my affected computers but
    it did not fix the issue on the account I was having problems with.
    http://www.ccleaner.com Install
    and run it, use it only to remove Flash under the Applications Tab,
    Multimedia, Adobe Flash Player. Check it and uncheck everything
    else, then hit Analyze then Run Cleaner.
    Possible Cause: Missing Codec
    Solution #2: Download and install the K-Lite Codec pack.
    Again, google it. A CODEC stands for COmpressor DECompressor and is
    a way to make audio and video files small enough to be transferred
    on the internet. There are a lot of different codecs and if you
    want to play back a video that was compressed using a particular
    codec, you will need that same corresponding codec to decompress
    your media source and view its content. Basically if you dont have
    a codec, you cant observe the content of the media. If you have a
    VCR and want to play back a DVD, you are out of luck unless you get
    a DVD Player. DivX and XVid Codecs are some of the very popular
    codecs used on the net, but to get those, I still suggest getting
    the K-Lite Codec Pack.
    http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
    Solution #4: Go back to Flash 7. If it aint broke dont fix
    it. This Final alternative is only to be used as a last resort.
    You'll have to get rid of Flash 9 and go back to Flash 7. The
    really tricky part here is that you have to prevent Flash from auto
    updating itself. If you install Flash 7, and hit up YouTube, you'll
    immediately get Flash 9+ installed again with the same problems. So
    AFTER you uninstall Flash 9 (use Macromedias / Adobes uninstaller,
    yet again go google it) make a new text file and name it MMS.CFG,
    in the file put this one line "AutoUpdateDisable=1" (without the
    quotes) and put it in BOTH your c:\windows\system32 AND
    c:\windows\system32\Macromed\Flash folders. This will prevent flash
    from Auto Updating to 9+, then have to find some place to download
    the old flash 7 installer. I found one here.
    http://www.intercomm.com/downloads/Flash7.
    Only problem is that most sites will try to make you install Flash
    9 and Flash 7 does not work on all sites, but it does on some like
    YouTube. DO NOT UPDATE TO FLASH 9+ IF YOU USE THIS METHOD.
    You will probably want to IMMEDIATELY go to
    http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
    after installing Flash 7 and UNCHECK the update feature
    I've tried to write this quick little guide at 3AM so Im not
    going to take more time to research other ways to fix this problem.
    If you have other solutions, such as for MAC and LINUX, or feel
    like adding on to something else that I've written here (links
    would be useful to the downloads I suggested) or correcting any
    mistakes I probably have made, please say so.
    One of these solutions is bound to help you. Theres multiple
    causes for this no audio problem so there is obviously multiple
    fixes.

    http://www.omahapokernews.org
    http://www.holdempokernews.org
    http://www.7cardstudplay.net
    http://www.5cardstudplay.net
    http://www.holdemspot.org
    http://www.texasholdemstate.net
    http://www.texasholdemstate.com
    http://www.pokerbonuslist.net
    http://www.pokerdownloadz.org
    http://www.signuppoker.net
    http://www.tournamentpokerz.com
    http://www.pokercalculatorz.com
    http://www.omahaodds.org
    http://www.omahaouts.org
    http://www.texasholdemrulesonline.net
    http://www.onlineholdemtips.com
    http://www.pokerhilo.net
    http://www.poker-hilo.com
    http://www.hilopokers.com
    http://www.nolimit-holdempoker.net
    http://www.texasholdemlimits.org
    http://www.texasholdemlimits.net
    http://www.onlinepokerlimits.org
    http://www.onlinepokerlimits.net
    http://www.onlinepokerlimits.com
    http://www.texasholdemlimits.com
    http://www.7cardplayer.net
    http://www.5cardplayer.net
    http://www.omahaacademy.org
    http://www.omahapokerrooms.net
    http://www.onlinepokerroomstop.net
    http://www.playpoker-toppokerrooms.com
    http://www.texasholdemz.com
    http://www.playpokeronline-casinos.com
    http://www.texasholdem-vip.com
    http://www.gamble-poker-holdem.com
    http://www.playpoker-holdem.com
    http://www.onlinetexasholdem-poker.com
    http://www.texasholdempokeracademy.com
    http://www.vip-texasholdem.com
    http://www.playfree-poker-online.com
    http://www.texasholdem-pokerrooms.org
    http://www.toppokerrooms.ws
    http://www.toppokercasino.ws
    http://www.onlinepokercasino.ws
    http://www.playpoker-online.ws
    http://www.online-texasholdem.ws
    http://www.play-texas-holdem.ws
    http://www.internet-texas-holdem-poker.ws
    http://www.poker-player.ws
    http://www.luckyschool.com

  • VGA problem with FiFA 2003 and Audio Problem with NHL2003

    i use onboard VGA
    800 x600for both games
    with no problem
    but for Fifa 2003
    the screen looks so dark...
    all players look like a black people(all  black color hair
    and black face))
    some audio problem with NHL 2003...

    Have you tried the following?
    Adjust monitor settings? i.e. contrast/brightness
    Video settings within the game? Some have gamma or brightness settings.
    Gamma correction in "Display Properties"?
    for starters anyway......

  • Audio Problems in Adobe Presenter: Help Needed Urgently!!

    I am using trial versions of Adobe Presenter 7 and Adobe Connect 8.
    I created a presentation in in Powerpoint 2002 and published through Adobe Presenter to Adobe Connect Pro. This presentation has voice over recorded through the Adobe Presenter "record audio" option.
    In Adobe Connect Pro, I created a meeting and shared the above mentioned presentation through the "Share Document" option in Connect Pro.
    Now, when I play the presentation in this Adobe Connect Meeting, I am not getting any audio that was recorded in Adobe Presenter. Whereas if I play the published presentation directly it plays the recorded audio.
    Can anyone help me on this?
    1. Are there any settings to be done in Powerpoint or Adobe Presenter or Connect pro?
    2. Is it the problem of Trial Account or something like that?
    Please let me know the solution. Need to work on this ASAP!!!
    Thanks in Advance,
    Yogini

    This is a weird one. If you created a prezo with audio and published it to AC (Adobe Connect) and everything worked fine on your desktop then it should work fine in AC i.e. there are no other settings required on AC's side, it should just play.
    As I am typing this I thought of similar audio problems that we have experienced in the past. A big one would be where another user created a PPT on their laptops and handed it to us. When testing the audio did not work. Reason being is that not all the files were coppied over BUT I must accept that this is not your problem as it definately worked on your PC before you published it to AC.
    Wait there is one setting in the publish settings. In the output options tick "Upload source presentation with assests", then tick audio.
    I cannot think of anything else. There is a man called Heyward Drummond on the Adobe Connect General forum, who is a real master at answering queries like this. Why not post your query there and see if he comes up with an answer?

  • Audio Problems when burning

    I have tried making disc image, burning disc and the audio will pause for second several times in the play back. It does not do it when playing back in iDVD.
    The slide show was started in iPhoto and sent to iDVD. I have started over several times and still same issue. Makes a bad impression and is really not useable for presentation.
    I have 30 gigs free space, changed settings to Professional encoding and still same issue. I have no open apps, changed all energy settings and screen saver to never.
    Any ideas, I am fresh out, never had this problem with previous version.
    Frustrated

    Andy,
    This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
    From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
    Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
    If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
    F Shippey

  • IMovie audio problems when burning in Toast 6

    Hi,
    i've tried to burn an imovie project in idvd 5 but i get 'the error #-1 was reported' like most people have been and i've tried loads of things suggested to fix it with no joy.
    I then sent the imovie project to toast titanium 6 where it burned fine. However, when i watched it i noticed that although toast had picked up all the audio (both dv audio and aiff), it did not pick up all the volume adjustments during the movie. how annoying! for example: i have an aiff clip that fades into a movie clip with the sound gradually going down but Toast picks up the sound staying at the same level. this also happens with volume adjustments in a DV file.
    Any suggestions why this happens / how i can fix it?
    Cheers,
    Andy

    Andy,
    This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
    From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
    Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
    If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
    F Shippey

  • Any Bluetooth audio problems since upgrading to ICS?

    Hi.
    Was wondering if anyone has had any Bluetooth audio problems since upgrading to ICS?  In particular, have you had any stuttering and/or pauses in streaming since the upgrade?
    I use a MW600 with my phone and I get stuttering and pauses every few minutes between the phone and the MW600 which is very annoying - to the point where I can't reliably use the phone for audio any more.
    Thanks
    Savcom

    Sorry but it seems to be a problem some users are experiencing. It's already been reported so hopefully there will be a fix for this soon.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • MSI H97 GAMING 3 Intel H97 With 2GB Asus GTX 760 DirectCU

    ust built my pc got it working with onboard grapics when i plug the dvi into the graphics card i get no display the HDD has a fresh install of windows 7 i haven't installed any drivers for the mobo or the GPU, im also using a fairly old VGA monitor and im using a VGA TO DVI connector.
    specs
    8GB (2x4GB) Corsair DDR3 Vengeance
    Intel Core i7 4770K Quad Core
    2GB Asus GTX 760 DirectCU II OC, 28 1
    MSI H97 GAMING 3 Intel H97 (Socket 1150) DDR3 ATX Motherboard
    This card has to be compatible with this board right? it can't be that issue?

    Quote from: Nichrome on 27-October-14, 23:23:26
    Hi,
    Yes both are compatible.
    What is your power supply?
    Also did you try any different cable for video between GPU and TV/monitor? Maybe try different monitor too.
    Hello ah, so the card and the MoBo are compatible? thats great!
    PSU is Corsair CX750M 750W ATX 80+ Bronze PC Power Supply
    also i will try a newer monitor that just has a DVI wire rather than using a converter

  • H97 Gaming 3 : Booting issue (A2)

    Hello,
    here's my config :
    H97 Gaming 3 motherboard (bios 1.6)
    MSI GTX 750 Ti Twin Frozr Gaming
    8 GB Ram (Kingston)
    1 SSD CRUCIAL 128Go
    1 Western Digital Black Edition 1 To
    1 Western Digital Green Edition 4 To
    1 BD-R Writer
    650W corsair power supply
    When I power on, the bios still displaying A2.
    If I disconnect any hard disk the power on, then it boot up.
    Then I connect all the disk and boot up. It will boot up correctly only 1 time.
    On the next reboot, it will hang with A2 error.
    All the disk (and BD-R) are working fine together on another motherboard (asus P7P55d)
    If I clear the bios, then it boots fine only 1 time after displaying that the bios was resetted.
    On the next boot, it hang with A2 error.
    Don't know how to solve it ... Does anyone have an idea ?
    Thanks.

    Quote from: cyril.lamy on 08-December-14, 14:16:15
    If I reset the bios on the motherboard, on the next boot I have a warning displaying that it was resetted. But I can boot normally just after that (butjust one time, On the next reboot, it hangs again).
    Did you try this without the drives and with only one stick of ram?

Maybe you are looking for

  • How to setup iphone remote without apple tv remote

    I lost my apple tv 1st gen remote and was wondering if there was any type of bypass method to set up my iphone as the remote. I really hate to buy a new one so please let me know if you know anything!! Oh by the way I have used usb creator 3.0 and re

  • Can't receive email with Mail 4.4 - but iPad does

    Hi guys, I have a strange problem with Mail 4.4: I have multiple email accounts that I manage through Mail - all work fine except my gmail account, which stopped receiving emails about a week ago. Here are some details: 1. The account constantly show

  • How to modify the SQL being generated from BC, to fix the issue

    Hi, We have seen a strange issue in our implementation.The issue is also reproducible in Vanilla environment. In Contact List Applet, if we Query in First Name or Last Name fields in UI, the Query being generated is,showing that, Siebel is Querying f

  • Exception thrown While Depolying

    Hi friends, I'm new to EJB. I wrote the following code in JMS but it throwing exception while deployment. I'm using JBoss4.2.0CR2 application server. MyCode is following LogBean.java package messagedrivenbean; import javax.annotation.PreDestroy; impo

  • How to geocode with an offset?

    I want to be able to offset the result of their geocode by 10ft. ie 101 main street is on the east side of the street, the lat long is offset 10ft to the east of the center line. Is there a feature in the Oracle Geocoder for this? My other thought wa