H97M-G43, Live Update 6 does not include Intel ME driver

I like the Live Update 6 software very much and use it a lot. Today I found a problem. Why dosent Live Update 6 include the Intel Management Engine Driver in the Automatic scan for drivers? This is what I do to see the problem:
Fresh install Win7HP-64
Install the NIC driver manually in order to have Internet
Install the latest Live Update 6 from MSI (in this case from H97M-G43 utility)
Run Automatic scan, select suggested "drivers" only, and Total Installer
After finish, the Live Update 6 leaves a yellow flag in device manager. Is this a bug in LU6 or is it intended to be like this?

It's the same driver for all Z/H97 boards (including hotfix). There is no need to download anywhere else but the link on the product site of the board in question which has been provided earlier.
Quote from: flobelix on 17-October-14, 22:03:55
The Live Update software you like is unfortunately crap and you are very lucky that it did not brick your board thus far as it often does that.
Remove it and download drivers manually from poduct site: http://www.msi.com/support/mb/H97MG43.html#down-driver&Win7 64
You'll find the ME driver there too.

Similar Messages

  • 5530 update does not include emoticons support whe...

    Hello, in the latest update of 5530 xpressmusic, the emoticons update has not been added where as cheaper 5230 family does have this feature!!!
    Is Emoticons support going to be updated in next update??
    My region is India.

    Some models will receive the emoticons in the firmware update, and others will not. For example, it has been reported that the X6 hasn't received the emoticons update either. There is no telling whether or not emoticons will be added in future (if there will be any) firmware updates to the 5530 model.
    If you found this answer helpful, please click the green star just below. Thanking you!

  • Update does not include RAW support for Sony DSC-R1

    Looks like there is no support for the DSC-R1 in the 10.4.7 update - that's a shame, I was hoping that it might be included

    To make the R1 work with aperture, one must convert the R1 RAW file to a DNG first.
    To make the new DNG work, you must lie to the computer.
    After all it is only a machine. Garbage in garbage out.
    So go to the following file:
    /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/Raw.plist
    Save a copy of original file
    Open the "plist" in TextEditor
    Find the Sony DSC-V3
    Delete V3 and type R1
    Save file
    Reboot Mac
    Convert an R1 RAW file to DNG
    Test
    Use Preview to open new DNG file.
    Did it open?
    Then aperture will open this file.
    Lock'n Load Baby!
    AJM
    MacBookPro   Mac OS X (10.4.7)  

  • Live type does not appear in hard drive

    I'm in the middle of reinstalling Live Type on my computer. I deleted it earlier today, trashing everything that had "Live Type" in its name, and have tried reinstalling the software from the original discs.
    I have two discs ("Live Type Data" 1 of 2 and "Live Type Data" 2 of 2) that I've tried to reinstall. I get the dialog boxes indicating that the discs are installing on the computer's hard drive, then after about 50 minutes, I get a message that "Installation was successful!" with a green check mark. After both discs were installed successfully, I restarted the computer (although there was no instruction to do that), but the software's icon didn't appear in my Applications folder. When I use "Find" to look for anything with "Live Type," all I get are files of previous titles that I'd created.
    Is the application software on another disc and I'm only loading the "media" for the software's use?
    A while ago, I installed only the first disc, but I still had the software's icon appear in my Applications folder.
    Is the Live Type application software stored on my FCE 1 (or FCE 3) installation disc.
    Any suggestions are appreciated.
    Gary

    Nick Holmes wrote:
    Final Cut Studio 3 no longer includes LiveType. Its functionality has been incorporated into Motion.
    I just got Final Cut Studio HD and was surprised it didn't have LiveType, which I love. I learned Final Cut at a college and they had LiveType. Still doing the install as we speak, but just wondering: Is it JUST AS EASY and fun in Motion as LiveType or is it way more involved? Is there any way to get LiveType?

  • The version of "Adobe Flash Player" on your system does not include the latest security updates and has been blocked. To continue using "Adobe Flash Player", download an updated version from Adobe's website.

    The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.

    You haven't actually asked a question, but as stated you should only download Flash Player directy from Adobe.
    Nor have you said what version of OS X and Safari you are running.
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3 or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
    * Unhelpfully, if you want the last version for PPC Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

  • When the apple review team review our app,they point out that our  app uses a background mode but does not include functionality that requires that mode to run persistently.but in fact,when the app in background ,the app need data update to make the

    when the apple review team review our app，they point out that our  app uses a background mode but does not include functionality that requires that mode to run persistently。but in fact，when the app in background ，the app need data update to make the function of  trajectory replay come ture。in fact， we have added function when the app  is in background mode。we have point out the point to them by email。but they still have question on the background mode，we are confused，does anyone can help me，i still don't know why do review team can't find the data update when  the app is in background and how do i modify the app，or what is the really problem they refered，do i misunderstand them？
    the blow is the content of the review team email：
    We found that your app uses a background mode but does not include functionality that requires that mode to run persistently. This behavior is not in compliance with the App Store Review Guidelines.
    We noticed your app declares support for location in the UIBackgroundModes key in your Info.plist but does not include features that require persistent location.
    It would be appropriate to add features that require persistent use of real-time location updates while the app is in the background or remove the "location" setting from the UIBackgroundModes key. If your application does not require persistent, real-time location updates, we recommend using the significant-change location service or the region monitoring location service.
    For more information on these options, please see the "Starting the Significant-Change Location Service" and "Monitoring Shape-Based Regions" sections in the Location Awareness Programming Guide.
    If you choose to add features that use the Location Background Mode, please include the following battery use disclaimer in your Application Description:
    "Continued use of GPS running in the background can dramatically decrease battery life."
    Additionally, at your earliest opportunity, please review the following question/s and provide as detailed information as you can in response. The more information you can provide upfront, the sooner we can complete your review.
    We are unable to access the app in use in "http://www.wayding.com/waydingweb/article/12/139". Please provide us a valid demo video to show your app in use.
    For discrete code-level questions, you may wish to consult with Apple Developer Technical Support. When the DTS engineer follows up with you, please be ready to provide:
    - complete details of your rejection issue(s)
    - screenshots
    - steps to reproduce the issue(s)
    - symbolicated crash logs - if your issue results in a crash log
    If you have difficulty reproducing a reported issue, please try testing the workflow as described in <https://developer.apple.com/library/ios/qa/qa1764/>Technical Q&A QA1764: How to reproduce a crash or bug that only App Review or users are seeing.

    Unfortunately, these forums here are all user to user; you might try the developer forums or get in touch with the team that you are working with.

  • When I try to watch any video clip I get this:   The version of "Adobe Flash Player" on your system does not include the latest security updates and has been blocked. To continue using "Adobe Flash Player", download an updated version from Adobe's we

    When I try to watch any video clip I get this:
    The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.
    I tried clicking on the Adobe Flash Player.  It said it accepted it but it did not make a difference.
    Can anyone help?
    Thank you!

    This did not work
    On Mon, Oct 27, 2014 at 8:59 PM, Apple Support Communities Updates <

  • Simulate Acquisition does not include new image file created after first call

    For example, I have 5 images in a folder.
    I call Simulate Acquisition.
    It cycles through all 5 images.
    Now If I include 1 more image it does not include this image in the "cycle". I need to reload this step by clicking Main\path\browse button and select any image in the folder and then it cycles through all 6 images.
    Is there anyway to automatically include new images added to the folder after the step has been created?
    Thanks.
    CVI 2010
    LabVIEW 2011 SP1
    Vision Builder AI 2011 SP1

    Here's a sample inspection and VI to illustrate how you could do this. I used an image variable and passed this into the Run LV step so the VI could read the file and update the image variable and then I used the Select Image step to get the image variable into the VBAI script so you can process it. I also added a delete option in the VI so you can delete the previous image when you read the next available image. Make sure to go to the Setup State and initialize the path variable to where your image files will live (to access the Setup State, go to View>>View Complete Inspection and select on the Setup option on the left hand side. I initialized it to c:\Image Folder
    Hope this helps,
    Brad
    Attachments:
    Read Dynamic Image File.zip ‏15 KB

  • Windows update does not work after using System recovery disk

    I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
    Solved!
    Go to Solution.

    I get errors saying A problem is preventing the troubleshooter from starting.
    That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
       Trouble with reinstall of Win7 64 on a L505-ES5018
    The fix was to install a new hard disk driver.
       Intel Rapid Storage Technology
    -Jerry

  • How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the 1st generation.

    How do I download IOS5 onto a first generation ipad?  Software Update does not appear under General in Settings on the first generation ipad.

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972

  • Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840)

    Photoshop CC 2014 (fresh installed and updated) does not recognize my graphic processor (NVIDIA GTX 840) but instead only a Intel HD 4600. How do I ensure that PS is using the full phardware power of my notebook. My OS is WIN 8.1 Thanks for your help, Meik

    In the end it was the NVIDIA software - excluding PS as application for support by high performance graphic processor to save energy - activated NVIDIA card use for PS & LR all fine now.

  • After updating to Yosemite ITunes update does not keep me logged in

    After updating to Yosemite ITunes update does not keep me logged in all the time. What happen to staying logged in when I decide to logout? Anyone know were to find info on being g able to turn this feature on or off? Thank you all who reply I use my ITunes all the time and hate it to put password in all the time is so frustrating to me.
    Thank you

    Web sites usually remember you by using a cookie, either a traditional browser cookie or a Flash cookie. If you have set Firefox up to clear your history when you shut down, you may be deleting the site's cookie(s), thus making you anonymous upon your return.
    The subject of cookies can trigger strong feelings, so you have a lot of options for how to handle cookies, including built-in choices, add-ons, etc. Rather than write out a very complicated set of options, could you I refer you to an article here:
    * [[Cookies - Information that websites store on your computer]]
    If you have a specific idea for how you want Firefox to handle cookies, but you're not finding enough help around here, please post back on your objectives so we can help you implement it.

  • TOC does not include hyperlinks in export to PDF

    I created an eBooklet in Pages, but when I export it to PDF, the TOC does not include hyperlinks to the pages. There aren't any signs of the TOC including links in the original Pages document, either.

    The iWork '09 DVD can be had at Amazon. You will need to apply the Apple IWork 9.3 updater to bring the applications to their last revision, and compatibility with Mavericks and Yosemite. The help menu in Pages ’09 v4.3 has a link to the that specific PDF user guide. The Number '09 guide is there too. The Keynote  '09 PDF User Guide is here.
    Pages v5 documents are not directly backwards compatible with Pages '09. You will need to export the content as Pages '09. Since Pages v5.5.1 is lacking nearly 100+ features that were in Pages '09, you must take care with opening Pages '09 documents in Pages v5. It will filter out content that it does not support (e.g. linked text boxes).
    Any double-click on a Pages document with both applications installed, will default to opening in Pages v5.5.1. Deliberate effort is required to open Pages '09 documents, either by the Pages '09 file chooser, or a two-finger tap (on your Air) to bring up the secondary menu that has Open with > Pages (4.3) on it.

  • View object SponsorVwView does not include a primary key attribute RowId

    Hi,
    I have an Entity Object and a View Object which do not have a primary key. So I use a ROWID to act as one. The only thing is that sometimes I get this error which causes the application to fail on the server:
    JBO-30003: The application pool (gov.fda.cber.pts.model.services.CberPtsServiceLocal) failed to checkout an application module due to the following exception:
    oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.PersistenceException, msg=JBO-26028: View object SponsorVwView does not include a primary key attribute RowId of entity base SponsorVw.
    Does anyone have any any ideas on this?
    Thank you in advance

    Hi...
    I believe you'll need a PK so Oracle will know how to update the MV. Is there any particular reason for you not having a PK in FAFG_ASSETS table? As an alternative, you may want to create a new column in this table and having a table trigger/sequence populating this column.
    But It looks like you are using EBS, so, I don't know if you can add new columns to tables.
    See if this thread can help you:
    Re: ORA-12014: table 'XXX' does not contain a primary key constraint
    Regards,
    Marcos

  • HP Mediasmart Live TV does not work on Windows 10

    HP Mediasmart Live TV does not work after Windows 10 upgrade.  Error says:  Your TV tuner cannot be accessed because it is being used by another application.  Please close any programs that might be using it and then try again.  Although I am able to open the settings and scan for channels, and I see the channels being found, but still no luck watching after the setup is done.  My HP Laptop has a built in HP ATSC/Analog TV Tuner card.  (AVerMedia maybe?)  I suspect that is may have something to do with the fact that the driver does capture at the same time you are watching (Allows you to pause and then continue watching live TV, also has the ability to scedule recordings)  Unfortunatly Windows 10 also removes Windows Media Center, so I can't check with that software, is also possible a remnant may be left behind to support Windows Media Center that is conflicting with something else.  Also would be nice if they would fix the installers so it does not uninstall the software, then fail to re-install it.  (All without any display or error messages, so your left scratching your head trying to figure out what happened.)  I managed to get the rest of MediaSmart to work, although it looks like the internet veiwer may not connect to anything anymore.  Looking for an updated driver or installer, or patch that would work for Windows 10.  As far as I can tell on the internet HP MediaSmart Live TV is supposed to work on Windows 10.

    OK, More information.   Installed Media Portal 1.  This works with the tuner card without additional modification, so this appears to be some kind of issue with the software.  Media Portal 1 does install a different version of Direct X, I don't know if that could have anything to do with it, but HP MediaSmart Live TV still comes up with the same error and will not run.

Maybe you are looking for