HA - ACE20-MOD-K9 - FT Group Config Will Not Synch (SSL)

Hi,
We have a pair of ACE20-MOD-K9 in Fault Tolerant mode. They are running multiple contexts and we have a problem with one particular context which is running SSL off-loading. Despite the config being identical on both (accept for the peer addresses obviously) and both having the same SSL Key and Cert files loaded on both, the configuration will not sync between them.
Here is the outputs from both:
XXXX-DC2-00-ACE1/XXXXX-CISCO-QUAD-SERVICES# sh ft group brief
FT Group ID: 8  My State:FSM_FT_STATE_ACTIVE    Peer State:FSM_FT_STATE_STANDBY_COLD
                Context Name: XXXXX-CISCO-QUAD-SERVICES        Context Id: 2   Running Cfg Sync Status: Successful
XXXX-DC1-00-ACE1/XXXXX-CISCO-QUAD-SERVICES# sh ft group brief
FT Group ID: 8  My State:FSM_FT_STATE_STANDBY_COLD      Peer State:FSM_FT_STATE_ACTIVE
                Context Name: XXXXX-CISCO-QUAD-SERVICES        Context Id: 11  Running Cfg Sync Status: Successful
XXXX-DC2-00-ACE1/XXXXX-CISCO-QUAD-SERVICES# sh ft group stat
FT Group                     : 8
Configured Status            : in-service
Maintenance mode             : MAINT_MODE_OFF
My State                     : FSM_FT_STATE_ACTIVE
Peer State                   : FSM_FT_STATE_STANDBY_COLD
Peer Id                      : 1
No. of Contexts              : 1
Running cfg sync status      : Peer in Cold State. Incremental Sync Failure: SSL Keyfile does not exist
Startup cfg sync status      : Peer in Cold State. Incremental Sync Failure: SSL Keyfile does not exist
XXXX-DC1-00-ACE1/XXXXX-CISCO-QUAD-SERVICES# sh ft group stat
FT Group                     : 8
Configured Status            : in-service
Maintenance mode             : MAINT_MODE_OFF
My State                     : FSM_FT_STATE_STANDBY_COLD
Peer State                   : FSM_FT_STATE_ACTIVE
Peer Id                      : 1
No. of Contexts              : 1
Running cfg sync status      : Incremental Sync Failure: SSL Keyfile does not exist
Startup cfg sync status      : Incremental Sync Failure: SSL Keyfile does not exist
XXXX-DC2-00-ACE1/XXXXX-CISCO-QUAD-SERVICES# sh crypto file
Filename                                 File  File    Expor      Key/
                                         Size  Type    table      Cert
fn42604_cert.pem                         1850  PEM     Yes        CERT
fn42604_privatekey.pem                   1679  PEM     Yes         KEY
quad2.pem                                1675  PEM     Yes         KEY
quad2_cer.pem                            2582  PEM     Yes        CERT
quad_prod_abbrv                          1675  PEM     Yes         KEY
quad_prod_abbrv_cer.pem                  2556  PEM     Yes        CERT
quad_prod_fqdn                           1675  PEM     Yes         KEY
quad_prod_fqdn_cer.pem                   2578  PEM     Yes        CERT
XXXX-DC1-00-ACE1/XXXXX-CISCO-QUAD-SERVICES# sh crypto file
Filename                                 File  File    Expor      Key/
                                         Size  Type    table      Cert
fn42604_cert.pem                         1850  PEM     Yes        CERT
fn42604_privatekey.pem                   1679  PEM     Yes         KEY
quad2.pem                                1675  PEM     Yes         KEY
quad2_cer.pem                            2582  PEM     Yes        CERT
quad_prod_abbrv                          1675  PEM     Yes         KEY
quad_prod_abbrv_cer.pem                  2556  PEM     Yes        CERT
quad_prod_fqdn                           1675  PEM     Yes         KEY
quad_prod_fqdn_cer.pem                   2578  PEM     Yes        CERT
All the Crypto files are identical as I copied them from one ACE to the other.
Can anyone shed any light on why this context is not syncing its configuration?
Thanks,
Dom Wilkinson

Hi,
Can you restart autosync and see if it fixes the issue,
no ft auto-sync startup-config
no ft auto-sync running-config
ft auto-sync startup-config
ft auto-sync running-config
Regards,
Siva

Similar Messages

  • Ok guys i need help my ipod touch froze during an update now i put it inot the recovery mode or dfu and it will not reset itself at all it comes up with an error code and says this ipod cannot reset now does anyone have any ideas of what to do with it

    ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and  it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Error 1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.

  • When I access Editor the mode is set on EXPERT will not change to GUIDED or QUICK. Pages overlap.?

    When I access Editor the mode opens at EXPERT and will not change to QUICK or GUIDED. Pages seem to overlap and preclude access to the left hand task menu. The operation freezes and the only solution is to cancel the task in Task Manager. HELP!!   illidgew4742172

    Good day!
    Are you talking about Photoshop proper?
    If not please refer to the appropriate Forum, if yes please post a screenshot to clarify the issue.
    Regards,
    Pfaffenbichler

  • 3850 wireless config will not save

    I have a 3850 switch stack and 1602i Lightweight access points. I setup the APs to join the switch via the DNS entry. When I access the 3850 GUI and go to the wireless controller to change the APs configs such as the names of the APs or their IPs, they change for a while they revert back to what they were within 1 minute.

    Duplicate posts.  
    Go here:  http://supportforums.cisco.com/discussion/12143441/3850-wireless-ap-config-will-not-save

  • When forwarding mail i select a group to send mail and when i go to select another group it will not open for me to select other emails in that file.

    when forwarding mail i select a group to send mail and when i go to select another group it will not open for me to select other emails in that file.

    When you select a "group", it automatically selects everyone in that group.
    If your just trying to add other people outside that group, then in the "To" make sure the curser is just after the last entry and you can hold your finger on that line to get your contact list to pop up or after the last entry you should have showing after that ;    
    Example:   [email protected]; [email protected];          *notice the ; then a space for the next one

  • IPhone 4S Calendar will not synch to OutLook 2010 from 1 of 2 phones

    Problem: iPhone 4S Calendar will not synch to OutLook 2010 from 1 of 2 phones. Contacts synch fine. Was no problem in the past until...
    Sorry for the length. Trying to give all info I can.
    Summary: Had to get motherboard fixed under factory warranty which included new hard drive, and reinstall everything on an HP DV7 laptop. So this is a clean installation of everything on the laptop (Win7). Configuring iTunes and Outlook 2010 for two iPhone 4S users (myself and wife) was my last step. Re-established each user account to iTunes. Calendar synch problem popped up on one of two iPhones that did not exist before.
    Prior history: all synchs worked great prior to the clean install and I never had a problem.
    Config: Windows 7, two iPhone 4S, Week Calendar apps on both. All software up-to-date on iPhones and Win7 (fanatic about that). Had OL2010 PST datafile backups and simply used them for the OL re-installs. OL2010 makes that easy. Each user has their own Win7 login to keep our stuff separate. Of course, OL has Calendar as part of its install.
    Week Calendar apps on both are configured with same calendars (Calendar, Home, My Birthdays, Work). Verified each iPhone Calendars app, Calendar button: From My PC listing has all these checked: All From My PC, Calendar, Home, My Birthdays, Work; Other: Birthdays.
    Difference: In using iTunes to synch, iTunes said the iPhone account was different from the OL account and asked to merge or replace. Apparently this is normal for iTunes on a new install (since basically it is) synching to prior synched stuff.
    iTunes settings for both: Connect iPhone for each user and checked INFO settings for Contacts and Calendars.I used “selected calendars” and verified. Each user has all four calendars checked.
    NOTE: Prior to each users first synch below, neither user had anything in OL2010 Calendar. Can't blame on recurring events problems in OL. ALL the events are on the iPhones and are being synched TO the PC to populate OL2010 Calendars.
    Additional Note: Contacts was already loaded into OL from my backups so synching has no problem.
    User 1 iPhone: Success 1st try.
    In iTunes, selected “merge info” instead of replace.
    Results: User 1 synched fine from iTunes to OL2010 including the 4 Calendars (Calendar, Home, My Birthdays, Work). 4 calendars showed up. No problems at all. Wonderful! expected behavoir.
    User 2 iPhone: Still failing to synch.
    In iTunes, selected “replace” instead of merge info. Apple’s dialog is incredibly confusing and non-explicit on what copies to what and what it does.
    Results: User 2 synched fine from iTunes to OL2010 for Contacts. DID NOT synch the 4 Calendars (Calendar, Home, My Birthdays, Work). Only calendar that shows up in OL is Calendar and it doesn’t contain any data. iTunes has no errors and the synch status bar indicates everything went fine.
    Tried: I deleted the PST files and copied the backup files back to OL to start over. ITUNES no longer gives me the merge info versus replace option. I’ve synched multiple times but the calendar data will not synch.
    Not Tried: Creating the same remaining named calendars (Home, My Birthdays, Work) in OL and trying again.
    ALL suggestions is greatly appreciated.

    Ok, new info. This gets better and better.
    In OL2010, the Calendar in the navigation pane had no arrow indicating it had subcalendars within it. I right clicked on Calendar and chose New Calendar. It gave me a list of the existing calendars that were missing !!
    When I cancelled, there was an expand arrow next to Calendar in the Navigation pane !!!!!
    Expanding it showed the unchecked missing calendars. I checked them and synched again.
    WRONG THING TO DO! ALL my wife's calendar entries in her iPhone since the laptop went down 3 weeks ago DISAPPEARED. No warnings, nothing at any step of this process. The OL files overwrote the iPhone data.
    I can't find any way to get them back as this **** iStuff relies on iTunes for everything.
    Is there any way to get her files back from before this synch?
    Is there no way to save data files off the iPhone w/o iTunes?
    Why doesn't iTunes let you control the direction of data transfer?
    I now have one very ****** off wife.

  • My Apple TV (1st Gen) will not synch with iTunes on my Laptop

    I've been trying to do this for a while, it shouldn't be too difficult i think.
    All i want to do is synch all the content on my laptop with my Apple TV (and vice versa) so all the content including photos and home videos is the same on both my Apple TV and my laptop.
    Some points:
    There's enough hard drive space on both
    I'm using Windows 7 ultimate on my laptop
    The correct port exceptions have been added to Windows Firewall
    I have purchases on both my laptop and Apple TV from the iTunes store
    We're using a wireless network and it while it's possible to get them both cable wired, it would be a pain
    Home networking is set up in iTunes on my laptop
    I've set up my Apple TV to synch (not stream) with my account on my laptop
    Both iTunes and Apple TV are up to date with their downloads
    I think that's it - am i missing anything, or should this now just work?
    Cheers
    David

    As per the question, really...
    "My Apple TV (1st Gen) will not synch with iTunes on my Laptop"
    There's no error messages
    Only the films i've bought on my AppleTV appear on my AppleTV
    It's been synching for over 4 hours and hasnt got past the first film and the progress bar is not moving
    David

  • My Ipod touch will not synch all songs in my library - on my windows 8 laptop. Doesn't matter if the songs are checked or not - only some songs will synch to the IPOD. I have multiple devices and two accounts.

    My IPOD touch will not synch all songs in my library. Library is on a windows 8 laptop. Checking the songs does not matter. I have multiple devices (ipod, IPhone 4 and 5, IPad 2) and two ITunes accounts.

    All songs play on the laptop windows 8. The second Ipod touch we have - all songs synch to it and play.
    But the first Ipod touch we bought - only half (or so) of the songs synch. So I assume there is an issue with the newer Ipod touch. The songs not synching are songs I added to the library from CD's.

  • Just bought a new mac mini, wireless keyboard, and track pad. My track pad will not synch. All advise I have been given is to change items in the setting menu, but I cant because I still have to get through the setup!!

    Just bought a new mac mini, wireless keyboard, and track pad. My track pad will not synch. All advise I have been given is to change items in the setting menu, but I cant because I still have to get through the setup!!

    The power button for the Trackpad is on the right hand end of the battery case. Press that button to initiate the pairing process. On the top of the Trackpad just above the power button is a tiny green light (you probably cannot see it unless it is lighted). That light will indicate ehther or not the Trackpad is discoverable. If the Trackpad has discoverable the green light will blink on and off. If it does not pair within 3 minutes you will have to press the power button again to re-initiate the pairing process. Once your Trackpad has paired, you can just leave it on and it will pair automatically when you reboot your Mac.
    If you are having problems pairing, try turning off any other Bluetooth devices within 30 or so feet of your Mac mini. That includes other Computers, iPhones, iPads, etc. that may be in the area. Once your Trackpad has pairedwith your mini, you don't have to be concerned about other Bluetooth devices.
    One other hint, I find that although the Wireless Trackpad does not eat batteries as fast as the Magic Mouse it still uses more than the Wireless Keyboard. It is a good idea to keep a supply of AA batteries around. I have used Apple's Rechargable batteries, but found they did not last that long before needing to be recharged. I have had the best battery life from Duracell Quantum batteries.

  • My iPod will not synch photo now that I have upgraded to iTunes 10

    I recently upgraded to iTunes 10. Ever since, my 80GB iPod classic will no longer synch with my Photo Library. It synches everthing else fine, but it will not synch photos. Does anybody know a fix for this?

    Change your itunes settinng from automatic mange music to manually manage music.
    1. Go to your photo tab in itunes
    2. Tick on sync photo from specified pth from your computer
    3. press the sync button
    have a great day.

  • My I pad2 will not synch on my mac. I receive a message that says I have an invalid account name or password. However, I do not have a mobile me account. Help!

    My I pad2 will not synch on my mac. I receive a message that says I have an invalid mobile me account name or password. However, I do not have a mobile me account. Help!

    Are you sure this is what the error message says?
    Your iPad is recognized by iTunes and when selecting sync, does the error message say that your iPad is locked and you must unlock it in order to sync?

  • Suddenly my iPhone4 will not synch with my iMac (OS 10.6.8).  What to do?

    Suddenly my iPhone 4 (ios4.3.4) will not synch with my iMac (OS 10.6.8).  What can be the problem?  The iPhone and the iMac seem to work fine in all other was and the iphone gives off its usual sound when plugged into the computer.

    iPhoto opens but not iTunes and no synching noted either on iMac or iPhone and after a few seconds iPhone screen goes black.  I turned off and restarted.  My wife is having the same problem with a different iPhone model and a Macbook.  The problem seems to have begun for each of us since upgrading to 10.6.8.  There are no error messages for either of us.

  • HT1386 My iTunes will not synch music downloaded from CDs from my laptop to my Iphone

    My iTunes will not synch music downloaded from CDs from my laptop to my Iphone. Help!

    Are you seeing an error message in iTunes when this happens?
    Are you syncing the music manually, automatically or over-the-air?
    To get a better idea of the syncing options take a look at this video and this Apple doc -> iOS: Syncing with iTunes

  • My ipod classic will not synch and im getting a -39 message

    My ipod classic will not synch and im getting a -39 message

    Howdy applebyusmc,
    If you are having an issue with syncing your iPod classic there are a few things I would suggest to correct your issue. See the steps starting here -
    Apple - Support - iPod - iPod classic Troubleshooting Assistant
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Had to have my hard drive rebuilt in my PC (not Mac). When I reinstalled my music library from iTunes, several of the songs did not download properly - they appear in light colored ink on my library list but the songs will not play and will not synch

    Had to have my hard drive rebuilt in my PC (not a Mac).  When I reinstalled my music library from itunes, some of the songs did not properly download.  They appear in light colored ink, but will not play and will not synch with my iPod.  How can I get all of my songs back?

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

Maybe you are looking for

  • How can I dual-boot Windows 7 with pre-Instal​led Windows 8.1

    Hi, I have a Toshiba Satellite C55-B5362 with pre-installed Windows 8.1. Make DualBoot Windows 7 and Windows 8.1 (both 64 bit), so, I don't know how to do this. If I set BIOS to CMOS and Install Windows 7 disabling Secureboot, I will lost all the pre

  • Oracledbconsoleorcl service is not running ?

    i installed oracle database and developer suite 10g and the service mentioned was working properly at the first time , but when i restarted the computer it did not work , and when i try to start it , this message appears windows couldn't start the or

  • Ios 6.1.2 iphone 4s turning off

    I havent updated to 6.1.3 yet, and maybe this will fix my problem, but when my battery gets to about 20% and I turn on any app it turns its self off.  and as soon as I plug it in it shows I have 21+% battery... why does it do this? I have about 14GB

  • InterMedia Java Servlet photo album sample application

    O/S Microsoft 2000,oracle 8.1.7 PROBLEM IS HAVING CONFIGURRED ALL THE PARAMETERS AS DEFINED IN THE READ ME FILES AND HAVING COMPILED THE CODE TO GENERATE THE CLASS FILES AND PLACED THEM IN THE SAID FOLDERS THE ERROR FOR JSP AND THE SERVLET EXAMPLE IS

  • TIMESTAMP OVERLAPPING Error in loading Master DATA

    I am trying to load  the master data for 0rentobject and it gives message "timeoverlapping of record 1 99991231 with 5 10000101" what to correct is it some thing to deal with global settings in source system tab in bw or do i need to correct the date