HA BOX availability monitoring

Hi All,
Is it possible to monitor HA box WLC availability through SNMP?
What is the best practice to monitor this HA standby controller? As on config guide it said it is not possible to access standbyhot controller through GUI, PRime infra, or telnet.. Only can use console.
Regards,
Victor
Sent from Cisco Technical Support iPhone App

Hi.
"Note: Once SSO is enabled, the Standby WLC can be accessed via console connection, SSH/Telnet on service port, and SSH on the redundant management interface"
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bd3504.shtml
for monitoring in prime i found this link:
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/1.2/user/guide/chgdevconfig.html
hope this helps

Similar Messages

Use of 'Item' Check box available in 'Additional Authorization Creator'

What is the use of the 'Item' Check box available in 'Additional
Authorization Creator' document?
B1 Help States that:
Item
Defines the object as an item rather than a form.
Permissions set to form apply to all its subordinates. Permissions set to an item do not apply to the parent form.
My requirement is as follows:
I want to restrict a particular user from accessing the 'Logistics' tab
of the Purchase order.
1. I opened the 'Additional Authorization Creator' and added the 'PO
Logistics Tab' in the description window.
2. In the Forms Ids, i have mentioned as '114' (Form Id of Logistic
Tab)
3. Now I went to the authorizations screen and in the
UserAuthorization, I selected ''PO Logistics Tab' and set this to 'No
Authorization' for user named 'Raman'.
4. When I logged inwith user 'Raman', still I could access
the 'Logistics Tab' of the PO.
Please explain me the significace of 'Item' Check box available
in 'Additional Authorization Creator' document.

Hi Shridharan,
The Item option does not refer to the "items" like "fields, buttons, grids or tabs" but it refers to other forms which might have a parent form.
There is also a note which states that the authorizations for the above items vannot be created via the "additional Authorization window"
The text of the note is :
Symptom
When defining authorizations for specific item (field, button,
checkbox...) by using the Additional Authorization Creator, these
authorizations are actually not applied, and the user can work as if
these additional authorizations were not created.
Other terms
Additional Authorization Creator, Item, Field, Form
Reason and Prerequisites
FAQ
Solution
By definition, the Additional Authorization Creator is designed to
enable the creation of additional authorizations on form (window) level
only and not for item (field) level. Therefore, the additional
authorization that were created for single items have no meaning.
Note number : 1067360
Regards
Arshdeep

Availability monitoring using ccmsping - refresh rate

So I've configured my solman 3.2 to monitor the availability of other systems via the use of ccmsping. I can see the other systems well enough, but the problem is the long time it takes for my solman system to become aware that a monitored system is no longer active.
It can easily take 20 minutes for it to report that a system is unavailable. When I say "report", I mean that the status is updated in the 'Availability and Performance Overview' monitor in RZ20.
Even then, the only evidence visible is that the 'Availability' alert changes colour due to the % availability over the last 15 minutes. The other alerts for Groups and Instances simply turn white because no information is coming from the child system.
SAP help and the document "Availability Monitoring with CCMSPING.pdf" advice that monitoring frequency can be changed by changing the parameter values for the CCMS_AVAIL_LOGON_CHECK method. I have changed these values, which have had no apparent impact on the response times for noticing that a system has become unavailable.
Any suggestions?

Hai Dirk,
I have checked all the ways possible, we have sapms<SID> in the IP service name filed.
Tried with 36<Instance number>, aslo tried with IP address in the host name filed but no luck.
We have 4 PRD systems out of which 2 works and the other 2 is not working. The working systems are 640 systems and the other two systems which is not working are 620 systems.
I have tried updating CCMSPING to the latest patch level as well.
The services file in the CEN system is maintained with correct values.
We have SAPROUTER running in our CEN system, and the entries can be found in my previous post.
We are not using the router to connect because the systems which are working do not have any router string attached to them.
Please let me know if you find any reason for the problem.
Thanks in advance.
Regards,
Yoganand.V

JEE MP: Authoring JEE Application Availability Monitor

Hi experts,
We've imported the JEE WebSphere MP's, completed discovery, enabled deep monitoring, and now have some issues authoring custom "JEE Application Availability Monitoring".
In the wizard on the "MBean to Monitor" screen we use the MBean name:
WebSphere:j2eeType=JDBCResource,*, as we'd like to monitor some JDBC Connection Pool stats.
On the next screen in the wizard, "Health State", we select the xPath:
MBeans/MBean[@Name="javax.management.modelmbean.RequiredModelMBean" and @objectName="WebSphere:J2EEServer=server1,Server=server1,cell=APPT75WASCell01,j2eeType=JDBCResource,mbeanIdentifier=cells/APPT75WASCell01/resources.xml#builtin_jdbcprovider,name=Derby
JDBC Provider (XA),node=APPT76WASNode01,platform=dynamicproxy,process=server1,spec=1.0,type=JDBCProvider,version=7.0.0.25"]/Properties/Property[@Name="stats" and @type="com.ibm.ws.pmi.j2ee.JDBCStatsImpl"]
The problem we have is that ALL of the stats and counters are found within this single Property, as seen below:
Current value:
Stats name=Derby JDBC Provider (XA), type=connectionPoolModule
Stats name=jdbc/DefaultEJBTimerDataSource, type=connectionPoolModule
name=CreateCount, ID=1, description=The total number of connections that are created., unit=N/A, type=CountStatistic, count=6
name=CloseCount, ID=2, description=The total number of connections that are closed., unit=N/A, type=CountStatistic, count=5
name=AllocateCount, ID=3, description=The total number of connections that are allocated., unit=N/A, type=CountStatistic, count=2306
name=ReturnCount, ID=4, description=The total number of connections that are returned to the pool., unit=N/A, type=CountStatistic, count=2302
name=PoolSize, ID=5, description=The size of the connection pool., unit=N/A, type=BoundedRangeStatistic, lowWaterMark=0, highWaterMark=2, current=1, integral=8.3568935E7, lowerBound=0, upperBound=30
name=FreePoolSize, ID=6, description=The number of free connections in the pool., unit=N/A, type=BoundedRangeStatistic, lowWaterMark=0, highWaterMark=2, current=1, integral=8.3485336E7, lowerBound=0, upperBound=30
name=WaitingThreadCount, ID=7, description=The average number of threads that are concurrently waiting for a connection., unit=N/A, type=RangeStatistic, lowWaterMark=0, highWaterMark=0, current=0, integral=0.0
name=FaultCount, ID=8, description=The number of connection timeouts in the pool., unit=N/A, type=CountStatistic, count=0
name=PercentUsed, ID=9, description=Average percent of the pool that is in use. The value is based on the total number of configured connections in the ConnectionPool, not the current number of connections., unit=N/A, type=RangeStatistic, lowWaterMark=93,
highWaterMark=100, current=0, integral=278663.0
name=UseTime, ID=12, description=The average time in milliseconds that a connection is used. The difference between the time at which the connection is allocated and returned. This value includes the JBDC operation time., unit=MILLISECOND, type=AverageStatistic,
avg=36.24588031222897, min=0, max=33275, total=83583, count=2306, sumSq=1.499105659E9, type=TimeStatistic, avg=36.24588031222897, min=0, max=33275, total=83583, count=2306, sumSq=1.499105659E9
name=WaitTime, ID=13, description=The average waiting time in milliseconds until a connection is granted., unit=MILLISECOND, type=AverageStatistic, avg=0.0, min=0, max=0, total=0, count=0, sumSq=0.0, type=TimeStatistic, avg=0.0, min=0, max=0, total=0,
count=0, sumSq=0.0
name=PrepStmtCacheDiscardCount, ID=21, description=The number of statements that are discarded because the cache is full., unit=N/A, type=CountStatistic, count=3
name=JDBCTime, ID=22, description=The average time in milliseconds that is spent running the JDBC calls, including the time spent in the JDBC driver, network, and database. (Applies to V5.0 data source only.), unit=MILLISECOND, type=AverageStatistic,
avg=0.66030797517812, min=0, max=687, total=2873, count=4351, sumSq=994891.0, type=TimeStatistic, avg=0.66030797517812, min=0, max=687, total=2873, count=4351, sumSq=994891.0
So then how do we configure Expressions for Health State at this point in the Wizard, if we have such a long string value containing ALL of the stats? Anyone have insight into this?
Thanks!

Hi experts,
We've imported the JEE WebSphere MP's, completed discovery, enabled deep monitoring, and now have some issues authoring custom "JEE Application Availability Monitoring".
In the wizard on the "MBean to Monitor" screen we use the MBean name:
WebSphere:j2eeType=JDBCResource,*, as we'd like to monitor some JDBC Connection Pool stats.
On the next screen in the wizard, "Health State", we select the xPath:
MBeans/MBean[@Name="javax.management.modelmbean.RequiredModelMBean" and @objectName="WebSphere:J2EEServer=server1,Server=server1,cell=APPT75WASCell01,j2eeType=JDBCResource,mbeanIdentifier=cells/APPT75WASCell01/resources.xml#builtin_jdbcprovider,name=Derby
JDBC Provider (XA),node=APPT76WASNode01,platform=dynamicproxy,process=server1,spec=1.0,type=JDBCProvider,version=7.0.0.25"]/Properties/Property[@Name="stats" and @type="com.ibm.ws.pmi.j2ee.JDBCStatsImpl"]
The problem we have is that ALL of the stats and counters are found within this single Property, as seen below:
Current value:
Stats name=Derby JDBC Provider (XA), type=connectionPoolModule
Stats name=jdbc/DefaultEJBTimerDataSource, type=connectionPoolModule
name=CreateCount, ID=1, description=The total number of connections that are created., unit=N/A, type=CountStatistic, count=6
name=CloseCount, ID=2, description=The total number of connections that are closed., unit=N/A, type=CountStatistic, count=5
name=AllocateCount, ID=3, description=The total number of connections that are allocated., unit=N/A, type=CountStatistic, count=2306
name=ReturnCount, ID=4, description=The total number of connections that are returned to the pool., unit=N/A, type=CountStatistic, count=2302
name=PoolSize, ID=5, description=The size of the connection pool., unit=N/A, type=BoundedRangeStatistic, lowWaterMark=0, highWaterMark=2, current=1, integral=8.3568935E7, lowerBound=0, upperBound=30
name=FreePoolSize, ID=6, description=The number of free connections in the pool., unit=N/A, type=BoundedRangeStatistic, lowWaterMark=0, highWaterMark=2, current=1, integral=8.3485336E7, lowerBound=0, upperBound=30
name=WaitingThreadCount, ID=7, description=The average number of threads that are concurrently waiting for a connection., unit=N/A, type=RangeStatistic, lowWaterMark=0, highWaterMark=0, current=0, integral=0.0
name=FaultCount, ID=8, description=The number of connection timeouts in the pool., unit=N/A, type=CountStatistic, count=0
name=PercentUsed, ID=9, description=Average percent of the pool that is in use. The value is based on the total number of configured connections in the ConnectionPool, not the current number of connections., unit=N/A, type=RangeStatistic, lowWaterMark=93,
highWaterMark=100, current=0, integral=278663.0
name=UseTime, ID=12, description=The average time in milliseconds that a connection is used. The difference between the time at which the connection is allocated and returned. This value includes the JBDC operation time., unit=MILLISECOND, type=AverageStatistic,
avg=36.24588031222897, min=0, max=33275, total=83583, count=2306, sumSq=1.499105659E9, type=TimeStatistic, avg=36.24588031222897, min=0, max=33275, total=83583, count=2306, sumSq=1.499105659E9
name=WaitTime, ID=13, description=The average waiting time in milliseconds until a connection is granted., unit=MILLISECOND, type=AverageStatistic, avg=0.0, min=0, max=0, total=0, count=0, sumSq=0.0, type=TimeStatistic, avg=0.0, min=0, max=0, total=0,
count=0, sumSq=0.0
name=PrepStmtCacheDiscardCount, ID=21, description=The number of statements that are discarded because the cache is full., unit=N/A, type=CountStatistic, count=3
name=JDBCTime, ID=22, description=The average time in milliseconds that is spent running the JDBC calls, including the time spent in the JDBC driver, network, and database. (Applies to V5.0 data source only.), unit=MILLISECOND, type=AverageStatistic,
avg=0.66030797517812, min=0, max=687, total=2873, count=4351, sumSq=994891.0, type=TimeStatistic, avg=0.66030797517812, min=0, max=687, total=2873, count=4351, sumSq=994891.0
So then how do we configure Expressions for Health State at this point in the Wizard, if we have such a long string value containing ALL of the stats? Anyone have insight into this?
Thanks!
I'm using the latest JEE MPs and SCOM 2012 R2, however I don't show the stats as a property on this MBean.

Regarding Availability Monitoring.

Hi All,
We are using SOLMAN 7 for availability monitoring of our system landscape.
We have installed CCMSPING agents in all the servers and all are running fine.
For our BI system we are not getting the availability data for the different instances. In RZ21 availability monitoring we are able to see only the Central instance of the our BI system and not any of the other app. instance.
We checked the CCMSPING agent of all application servers in BI system and they are up and running and all RFC related to CCMSPING in SOLMAN are working fine but still no data.
We also checked the /etc/host file of SOLMAN and message server for BI is mentioned there.
How can we involve the application instances in SOLMAN for BI please help on this.
Regards,
Arun Pathak

Hi,
Check this Link for the Performance monitoring-
http://help.sap.com/saphelp_nw2004s/helpdata/en/9e/6921e784677d4591053564a8b95e7d/content.htm
<i>g)system alarm trigger a page, FAX, email, etc..?</i>
>>>Is available.
http://help.sap.com/saphelp_nw2004s/helpdata/en/4e/20934259a5cb6ae10000000a155106/content.htm
Regards,
moorthy

Availability Monitoring from Solman

Dear community,
we are using availability monitoring with CCMSPing from our Solution Manager as central monitoring system. We tried to configure a central autoreaction method that send automatically emails if a syste is down. That works for all other configured MTE-classes but not for the availability classes.
What could be the issue with that?

Hello Christoph,
> availability monitoring with CCMSPing from our Solution Manager as central monitoring system.
> We tried to configure a central autoreaction method
the information regarding the availability is stored locally in your central monitoring system therefore a central autoreaction will not work here (because there is no agent that will trigger this).
As a consequence you have to configure an additional autoreaction that is started in dialog. Please note that the local autoreaction will be started in client 000 so you need also to configure SAPconnect in this client.
Regards, Michael

Availability monitoring using CCMSPING..

Hai,
Iam facing problem in Availability monitoring using CCMSPING. CCMSPING is installed on CEN system which is a SOLUTION MANAGER system with SAP_BASIS - Release 702 and Level - 0002. (SAP EHP 1 for SAP NetWeaver 7.0)
We have 4 Production systems in the landscape out of which 2 systems are not reporting the data in RZ20 in CEN under 'Availability Monitoring' MTE. I got the below error when I tried to Test ping the connection for the faulty servers in RZ21 in CEN.
Error:
CCMSPING communication error: Cannot access message server
Also I got the below pasted errors from dev_ccmsping from the CCMSPING working directory.
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 7
    (SI_ECONN_REFUSE/111; I4; ST; 1x.1xx.1x.xx:3600) [nixxi.cpp    2823]
ERROR => MsIAttachEx: NiBufConnect to /H/xxxxx.xxxxxxx.xxx.xxxx.COM/S/sapmsxxx/sapmsxxx failed (rc=NIECONN_REFUSED) [msxxi_mt.c   652]
ERROR => LgIAttach: MsAttach (rc=NIECONN_REFUSED) [lgxx_mt.c    3980]
***LOG Q0I=> NiPConnect2: connect (111: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 7
    (SI_ECONN_REFUSE/111; I4; ST; 1x.1xx.1x.xx:3600) [nixxi.cpp    2823]
ERROR => MsIAttachEx: NiBufConnect to /H/xxxxx.xxxxxxx.xxx.xxxx.COM/S/sapmsxxx/sapmsxxx failed (rc=NIECONN_REFUSED) [msxxi_mt.c   652]
ERROR => LgIAttach: MsAttach (rc=NIECONN_REFUSED) [lgxx_mt.c    3980]
ERROR => Error response: 404 - expected: 200 [csmhttp_mt.c 465]
I have checked the /etc/services files as well but no luck. Please help me with suggestions.
Thanks in advance.
Regards,
Yoganand.V
System details:
Kernel release: 701
Operating System: Linux 2.6
OP release: 2.6.5-7.282-smp
Database system: ORACLE
Release: 10.2.0.4.0
Machine type: x86_64

Hai Dirk,
I have checked all the ways possible, we have sapms<SID> in the IP service name filed.
Tried with 36<Instance number>, aslo tried with IP address in the host name filed but no luck.
We have 4 PRD systems out of which 2 works and the other 2 is not working. The working systems are 640 systems and the other two systems which is not working are 620 systems.
I have tried updating CCMSPING to the latest patch level as well.
The services file in the CEN system is maintained with correct values.
We have SAPROUTER running in our CEN system, and the entries can be found in my previous post.
We are not using the router to connect because the systems which are working do not have any router string attached to them.
Please let me know if you find any reason for the problem.
Thanks in advance.
Regards,
Yoganand.V

No availability monitor defined in RZ20 error

Hi All,
I have configured NWA with the ABC system ( CEN system) with the monitored system XYZ. I am able to see all the reports, logs etc from ABC for XYX system through login to http://ABC-host:port/nwa.
But while going to monitoring -> availability i am getting the below error:
"No availability monitor defined in RZ20; check version of central monitoring system"
Please tell me where i am worng here.
Thanks,
Rohan

Hi Chandra,
Both of the agent is running fine and i am able to test successfully in ABC (CEN) system) under RZ21.
But the problem is occuring in only NWA.
Thanks,
Rohan

NWA Availability monitoring problem

With NW04s at SP8 I have an ABAP+J2EE system that is my Central Admin/Monitoring system. I have setup CCMSPING in central system and also in RZ21 of the ABAP system. I verified the systems are showing in RZ20 with green/100% indications.
When I go to set them up in NWA, I see them listed with yellow warnings next to them in the availability monitoring screen. When I scroll down and click 'enable availability monitoring', I get a message at the top "SYSTEM_ALREADY_MONITORED".
Why might it be telling me that, even though the metrics are not showing up in the NWA?

Hi Dave,
if you don't see the availability of monitored instances in the central reports, then you'll probably don't see it in the transaction RZ20 as well. Is this correct?
If so, did you check the following documentation?
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/9e100dd7980fffe10000009b3810a5/frameset.htm
and another source of information that might help (SAP Tutor, so make sure that the SAP Tutor player is installed on your computer):
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/a-c/availability%20monitoring%20and%20ccmsping.sim
Kind regards
Dirk

Published list of available "Monitored Attributes".

Hi all,
I am trying to create some user defined monitoring alerts. Is there a list of available "Monitored Attributes", such as CpuUsage.usagePercentage, ProcessUsage.*, etc
I have looked through the docs and can't see a list of available attributes.
In the document "Advanced User Guide - E18416" they are mentioned on page 96 and page 99 point 3b mentions "javadoc public API". No idea what that means.
Can anyone shed some light?
Cheers
Neil

Hi all,
Not to self: Install the SUNWxvmoc-sdk package and read the javadocs ;-)
Cheers
Neil

Unable to download web test results for failed Availability Monitor request - HTTP 500

When attempting to download the Web Test results for a failed request in my availability monitor, the server returns HTTP 500.
The full URL attempting to be accessed is https://stamp2.app.insightsportal.visualstudio.com/api/WebTestResult?fileName=eProd Dx1 Api_2015-02-25T16:58:00.000Z.webtestresult&subscriptionId=REMOVEDFORSECURITYPURPOSES&resourceGroup=eprod-dx1webapi&webTestId=eprod
dx1 api-eprod-dx1webapi&location=us-ca-sjc-azr&timestamp=1424883480
I can provide the sub ID as needed.

Thinking this is an Azure Portal issue. Please move.

Missing sapmsg.ini in Sapgui 7.2 for CCMSPING availability monitoring

Hi All,
I've been trying to locate the SAPMSG.INI file for configuring the CCMSPING availability monitoring through RZ21 on Solman, but could not find the sapmsg.ini file in the specified location of ' c:\winnt\sapmsg.ini ' which was mentioned in the SAPGUI logon pad's option window. Can you help me to locate this file?
Thanks,
Modena

Hi,
for 7.2 te config files wont available in c:
windows
it should be under C:\Documents and Settings\<username>\Application Data\SAP\Common
Please check the note also [Note 1442303 - SAP GUI 7.20 - replacement of SAPWORKDIR|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1442303]
check here
Thanks,
Jansi

Reg CCMS Availability Monitoring

Hi ,
I am in the process of configuring CCMs availability monitoring for my Systems.
I have the following scenario
1. System A is the CEN System and the CCMSPING Server is running in this System.
2. System A should monitor System B and send a mail if the Server B gets shut down
I have done the following until now
1. CCMS Agents are running and i am getting CCMS Alerts of System B from System A
2. In Rz21--> CCMS PING Monitoring. I have added the systems
When i select the system B in Configuration Overview and Performance Availability and select Ping Test it is failing
Please let me know the following information
1. Does CCMSPING installed in System B also?
2. Do i need to create a SM59 connection in System B(as i have in system A) with name CCMS_SYSTEM_PING_DEST. If so what are the parameters for that

Hai,
Check your inputs for the System, such as Message server port, Message server host, CS Message server host/port.
or try re installing the CCMSPING utility.
Check the below link for further details.
http://help.sap.com/saphelp_nw70/helpdata/EN/38/9e3337d7840ffee10000009b3810a5/frameset.htm
Regards,
Yoganand.V

CCMSPING Availability monitoring for Cluster system

Hi!
I would like to know which entry in SOLMAN (tcode RZ21, field Message Server Host Name) for the CCMSPING Availability monitoring of the satellite systemdoes apply?
The satellite system was installed as cluster with 2 nodes.
The problem is that I can see the node in RZ21 (Availability) but no data is shown
I think possible are the following:
first node (ABCD1234)
seconde node (DFRG1234)
ABCDdbpxx (virtual db node)
ABCDcipxx (virtual instzance node)
IP adress of the system
Thank you very much!
regards
Thom

The CCMSPING is used only to configure the logon check. After this there is a data collection method CCMS_AVAIL_LOGON_CHECK responsible to update the status.
The normal configuration the method run in dialog every 5 minutes. Sometimes a solution for this kind of "value is obsolete" is changing to background.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/49/2fb95c65a116b4e10000000a42189d/content.htm
Anyway, you also should check the ccms_selfmonitoring in RZ20.

Missing sapmsg.ini when configuring CCMSPING availability monitoring

Has anyone has any issues configuring Availability Monitoring with CCMSPING under RZ21 ?
Under the option, Technical Infrastrucure -> Availability Monitoring -> Configure CCMSPING Monitoring
Monitoring -> Create System
There is an option to import the SAPMSG.INI file
I have sapgui 7.1 loaded on this desktop
For some reason, the file SAPMSG.INI is not available.
I even tried defining a Group Logon on SAPLogon, SAPMSG is still not available.
Then we tried defining the system manually - all we got was a message, "system not found"
Has anyone tried doing CCMSPING Availability Monitoring on Netweaver 7.0 (Solution Manager 4.0) ?

Hi,
The SAPMSG.ini is created by your SAPGUI. check it in your Windows directory, there should be one if you are connecting to any SAP server using the message server.
Check this link for configuring availability monitoring:
http://help.sap.com/saphelp_47x200/helpdata/en/38/9e100dd7980fffe10000009b3810a5/frameset.htm
Regards,
Siddhesh

HA BOX availability monitoring

Similar Messages

Maybe you are looking for