%HA_EM-3-LOG: NAC-RADIUS-FAIL-OPEN-DEAD: All RADIUS servers are dead changing the nac-enforcement ACL to permit all

We just implemented ISE 802.1x in couple of our Cisco 4507 switches and we are seeing the following error in the log.
%HA_EM-3-LOG: NAC-RADIUS-FAIL-OPEN-DEAD: All RADIUS servers are dead changing the nac-enforcement ACL to permit all
I paste it in the Cisco error message decoder and came back with not found.
Thanks...

Jimmy,
Srory for the late reply but it turned out to be we needed to add the missing auth data vlan command on the switch. After that the error went away.
Thanks for you input I do appreciate it.
Jack.

Similar Messages

I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open.

I am running safari 7.0.6 with IOS 10.9.4. after the mac has been asleep and I log on I cannot open safari as it appears to have crashed. the workaround to this is to reboot the IOS and log back in after which safari will open. Any ideas on how to resolve this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

When I choose to open a new tab from a website, such as facebook, it always opens it in a new window. How do I change this to just opening a new tab. I tried changing the tab settings but it did not work

When I choose to open a new tab from a website, such as facebook, it always opens it in a new window. How do I change this to just opening a new tab. I tried changing the tab settings but it did not work. I did not have the problem until I started using firefox 4.

It is probably a JavaScript link.
You can probably force it where you want it with a keyboard shortcut
either "Ctrl+click" or "Ctrl+Shift+click". see
* Firefox and other Browser Keyboard Shortcuts (Comparison Table) http://dmcritchie.mvps.org/firefox/keyboard.htm
''Did that work?''
Some styles that provide a warning as to the type of link:
* No Follow links, mouseover id of other links - userstyles.org http://userstyles.org/styles/10987
* Change cursor on some links with JS. - userstyles.org http://userstyles.org/styles/233
* Link Warning - Themes and Skins for Mozilla - userstyles.org http://userstyles.org/styles/1301
* Link warning (cursor hover) - various filetypes - userstyles.org http://userstyles.org/styles/2538
* Red hand cursor for .pdf links - userstyles.org http://userstyles.org/styles/553

Cannot open Word File because "there are problems with the contents"

Hi Everyone,
I cannot open Word File because "there are problems with the contents" unspecified error; Location: 2. Please help as I need this doc for work meeting this morning. Nothing special about this doc but links were copied into it??? However I do that all the time. I have never had this happen before. I am on a 2010 machine. I just ran a disk permissions repaired and emptied the trash but still no dice. I had several other word docs up as well when I got up this morning but they are all fine. I do not have Time Capsule turned on (which I need to do but that will be another thread/question).
Thank you,
sb

Ok, I found a way to open this but not sure what happened to begin with and the formatting setup is different now, almost like text editor? Not sure what happened here but hope it doesn't happen again?

I have used the resume tablet and put my resume into format but when emailing it, it will not open on windows. How can I change the format to where they will be able to open and view it?

I have used the resume tablet and put my resume into format but when emailing it, it will not open on windows. How can I change the format to where they will be able to open and view it?

I guess you mean one of the resume templates.
What "format" have you saved your finished resume in?
The only formats a Windows user will be able to open are .doc (Word), .pdf and rtf. The 1st 2 are usually the best.
There is no Windows version of Pages.
Peter

ISE NAD RADIUS Fail Open

Good afternoon,
NAC offers ip admission command for fail open on a router. Is there an equivalent command for access switches pointing to a RADIUS server?
Situation:
Access switches have two RADIUS servers configured, one pointing to Load Balancer at Site A (with 6 PSNs behind) and the second RADIUS pointing at the LB at Site B (6 PSNs behind). If neither Site Load Balancers are reachable, how could we have the access switch fail-open and apply a ACL which would give access only to the Internet to the staff?
Thanks.
Cath.

Cath,
You can actually leverage the command "authentication event dead action authorize vlan id" and dump the users on a vlan that will grant them access while the radius servers are unreachable.
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/software/release/15.0_2_se/configuration/guide/sw8021x.html#wp1194433
Thanks,
Tarik Admani
*Please rate helpful posts*

Not able to open Enterprise dba console in 10g after changing the system ip

Hi Guys,
I have installed 10g database on windows 2003 server.
I was able to open the Enterprise manager DB console(EM) after installation. But I changed the IP address of the system and now I m not able to open the Enterprise manager.
Any help will be much appriciated in this regard.
With Regards
Ansh
Message was edited by:
AnshTyagi
Message was edited by:
AnshTyagi

Configure EM manually
emca -repos drop
emca -repos create
emca -config dbcontrol db
emctl start dbconsole
emctl status dbconsole
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com/

How do I block a popup window that I have allowed to open on Firefox once? I now have the popup blocker set to block all sites, but the popup still opens every time I open Firefox or open (sometimes) a new tab.

How do I block a popup? I allowed this popup to open once. Now I have set the popup blocker to block all sites but this popup still opens every time I open Firefox and sometimes (usually) when I open a new tab.
I Have stopped and restarted Firefox multiple times.
I have rebooted the computer.
I have set the tools/options/content/block pop-up windows/exceptions to block all sites (no exceptions).
I have no other issues with Firefox.
I have Adblock plus (with (1) subscription) installed
I am currently using Firefox version 4.0 on Windows7 Ultimate.

Just to address the last point: check your History menu to see whether you have the Restore Previous Session option and use that if you can. If that is grayed out or doesn't restore everything, check the Recently Closed Windows and Recently Closed Tabs lists for other pages.
The unwanted window may be generated by an add-on. Try disabling ALL nonessential or unrecognized extensions on the Add-ons page. Either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable.
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Any improvement?
Here are some other things to check:
(1) user.js file that changes Firefox startup behavior and overrides your preferences. This article describes how to track that down and delete it if you have one: [[How to fix preferences that won't save]].
(2) Possible hijacked shortcut. Check the "target" of the desktop icon you use to start Firefox to see whether it lists the unwanted page. To do that:
right-click the icon > Properties > Shortcut tab
For 64-bit Windows 7, the Target should be no more and no less than this:
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
(3) Possible undisclosed bundle items. If you have installed any free software recently, check your Windows Control Panel, Uninstall a program for surprises. If you click the "Installed on" column head to group by date, it is easier to spot bundled junk. Remove everything suspicious or unrecognized.
(4) Supplemental clean up scans. Our support article lists tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
Hopefully that cures it.

When I search for something, firefox opens a new tab with the results. How can I change the settings to where it will all stay in the same tab?

When I search something Firefox automatically opens a new tab with the results of this search. How do I change the settings to where the results will appear in the same tab as where I conducted the search?

Whether to open search results in new window most often is a setting of the search engine you are using.

HT1918 How can I change the country? Eventhough I follow all the steps when I save it and log on again there is no change.

I have been leaving overseas and created an account in Australia. Now that I am back in Spain, I am trying to change the country to be able to use the spanish app store but I can not do it. I change the country and the credit card detail in my apple Id settings and save it. When I log on again there is no change.

Try contacting iTunes support and ask if they can remove the balance from your account : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

I purchased an iBook on my iPad air and all software updates are done but the book is listed under purchased and will not open to view

I Purchased a book in iBooks on my iPad air with all updates complete 8.0.2 and the book is listed under purchased and will not open to view

Tapping the icloud arrow should get it to download to your bookshelf and it should then get 'downloaded' against it in Purchased instead of the arrow. See if any of the following fix it :
- close the iBooks app via the device's taskbar and then re-open the app and re-try downloading it : iOS: Force an app to close.
- soft-reset of the device : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.
- log out and back into your account : select the Featured tab in the app, scroll to the bottom of it, tap on your id and log out, and then log back in

Is it possible to select multiple files on the W8.1U1's SEARCH RESULTS window page? For instance, if 10 CPP files are found by the seraching mechanism, can I select all 10 files and have them open in Visual Studio at once?

TIA.

Brandon, this forum member is known since a long time ago an arrogant (he thinks he knows more than every other) and stupid(*) (full of misconceptions). His first post is a very good example of what I just wrote. How does he dare to suggest to use File
Explorer, if W8.1 already has a system built for doing just this search? Do I have to open File Explorer in the folder (or somewhere near) the item I'm looking for? What about the other items in folders above it? This suggestion is stupid(*). He even
asserts that I'm using Modern UI! I'm not! I'm using the desktop, but his misconceptions make him write such idiocies(*) with such arrogance: asserting what he doesn't know (arrogancy and stupidity). And more, this guy is no one to say he/he/he to me, because
I know he is what you deleted from my posts, and more, he is often crying, moaning and snivelling like a spoiled child in this forum and messing up any thread posting stupid(*) images of programs imagined/designed/developed by others. All posts from him in
this thread must be trashed (you should do it). He has nothing to contribute POSITIVELY in this thread, but just to MESS IT UP.
(*) stupid, I can write, after all, you didn't delete this word from this ... poster.
Now, look at the first reply: this forum member has no idea how much stupid is his 'work around'. And this 'work around' does not answer my question and even does address the environment I mentioned: W8.1 U1 search results window page, and not File Explorer!
His second post just reassures me he has no idea what is the searching mechanism I'm talking about. He even mentions Win-w(!) which proves he totally ignore what is the searching mechanism I'm talking about. A user like this one, must have many monitors to
keep him busy looking at them, and having excuses for not read and learn technical documentation. It's ignorance about technical aspects of computer issues that makes him post bad bug report and a bad idea in Connect site:
Using Get-Date -Format "CyM" to work around some bugs
https://connect.microsoft.com/PowerShell/feedback/details/884502/using-get-date-format-cym-to-work-around-some-bugs
Only total ignorance about PowerShell makes someone post such bad 'bug' report. He got critics about his bad post, but I'm sure he doesn't understand.
Column headers for alias should include DisplayName instead of just Name
https://connect.microsoft.com/PowerShell/feedback/details/908152/column-headers-for-alias-should-include-displayname-instead-of-just-name
In fact, the information displayed is already DisplayName, but this guy has no technical knowledge to understand what is happening.
These 2 forum members just messed up a thread that should be free of negative contributions, besides off topic.

When you open a new tab, how do you change the site it goes to?

My Daughter downloaded accidently a tool bar, Searchqu.com. I have removed the tool bar and application, and reset the homepage. However when I open a new tab it defaults to http://www.searchqu.com/, how do I change this? I have tried resetting it to default and it does not help.

Did you try opening '''about:config''' and filtering on the url (or part of it) to see if there is a configuration variable involved.
How did you remove the toolbar and application, did you have to go into the control panel or did an extension sim,ply uninstall..

Imbeded links in my email always open with Safari. How do I change the default browser to Firefox

Safari will not open any pdf files. Just freezes on a blank screen as it tries to download the pdf.

Open safari in the upper left corner click safari>preferences>general>default web browser click on it and select what you want the defaut web browser to be

When opening a new tab, how can I change the page that is initially displayed?

When I open a new tab, the page that is initially displayed is one that provides a simple Bing! search. What can I do to make the initial display one of my own choosing?

Select Firefox (Top left) / Options/ Options / Main or General.
There you can select the thing you whant firefox to do when it is started up. If you would like it to open www.google.com for instance, you have to paste that url (= www.google.com) into the space below.
That's it!

%HA_EM-3-LOG: NAC-RADIUS-FAIL-OPEN-DEAD: All RADIUS servers are dead changing the nac-enforcement ACL to permit all

Similar Messages

Maybe you are looking for