HA enqueue ID changes when ASCS restarts, why??

Hello HA Gurus...
We are setting a sandbox system in HA mode to demonstrate that the
users can preserve their transactions context even when we have to
restart the ASCS instance, either on the same Host or on the second host.
On HostA we have installed ERP2006 SR3:
ASCS10
DB Instance
DVEBMGS00
On HostB we have installed:
ERS11
D01
Before doing interuption, the ensmon shows that the ERS is
properly connected to the SCS:
Try to connect to host vsrs9scs service sapdp10
get replinfo request executed successfully
Replication is enabled in server, repl. server is connected
Replication is active
When we perform a restart of the ASCS10 instance, even if the user sessions are kept,
the transactions are reset. On the ERS11 work directory, the
file dev_enrepsrv indicates the following error message when ASCS10 restarts:
Reconnect: repl. table layout has changed, delete old one
And in fact, the number of entries in the replicated enqueue servers
are reset to 0 and the transactions are reset.
On ERS hosts:
/usr/sap/RS9/SYS/profile/dev_eq_trc_856194
trc file: "dev_eq_trc_856194", trc level: 1, release: "700"
Fri Feb 5 10:21:12 2010
WARNING: EnqId_EN_ObjShMem_Check: incoming EnqId checked NON-
identical
WARNING: ObjShMem_CheckAuthoritativeEnqId: expecting RESET_ALL_TAS
-SHMEM--
OLD: ReqOrd.TimeInSecs = 1265383188
OLD: ReqOrd.ReqNumberThisSec = 20
NEW: ReqOrd.TimeInSecs = 1265383272
NEW: ReqOrd.ReqNumberThisSec = 2
LOG GZZ=> EnqId change, transaction resets expected !
LOG GZZ=> OLD: EnqId.Time = 1265314739
LOG GZZ=> OLD: EnqId.Rand = 503970
LOG GZZ=> NEW: EnqId.Time = 1265383239
LOG GZZ=> NEW: EnqId.Rand = 467156
WARNING: EnqId_EN_ResetHandler: Call_ResetAllTransactions
Any clue ???
Stephane
Edited by: Stéphane Boutin on Feb 12, 2010 10:26 AM

I have the same issue.
I installed DB and SCS instance on one AIX host and the ERS on another AIX host. The ERS connects to the SCS and when I issue the command
enqt pf=<ERS_Instance_profile> 11 30
the test entries are visible on ERS and SCS
But when I shutdown and restart the SCS all entries are reset. cleanipc on SCS does not change this.
Any idea what could be wrong? Any help is highly appreciated.
Best regards
Thomas

Similar Messages

Icons changing when downloading reader, why?

When I download any version of reader, all my desktop icons change to PDF icons. Running Windows 7. What's happening?

I don't know the why, but this should be useful for correcting the problem:
http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acroba t.html

Font settings keep changing when I restart Mail

I've noticed over the past few days that whenever I restart Mail, my font settings keep changing, so I have to keep going back in and adjusting them.
Anyone else having this problem, or know how to fix it?
I did a search in this forum, but didn't see anything about this.
Thanks!

I should clarify that this happens after I restart my computer, then open Mail. If I close Mail, then reopen it, without restarting, then this does not happen.

Whenever i m trying to install firefox the error will come that is previous firefox want complete uninstalation its required to restart the computer when its restart its not installed tell me why

whenever i m trying to install firefox the error will come that is previous firefox want complete uninstalation its required to restart the computer when its restart its not installed tell me why in

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

I restored my iPod touch and when it restarted it either freezes or loops in a restart mode. why?

i restored my iPod touch and when it restarted it either freezes or loops in a restart mode. why?

I have the same problem too. I just restored last night and it's been like this ever since. (14+ hours) ...

I updated to iTunes 11 on my Windows PC. Since the update, when I open iTunes its window is too large for my screen. Resizing is a pain, because I have to change my screen resolution. And when I restart iTunes,it has reverted back to being too large.Help!

I recently updated to iTunes 11 on my Windows PC. Since the update, each time I open iTunes its window is too large for my screen. Resizing it is a pain, because I have to change my screen resolution. And then when I restart iTunes, it has reverted back to being too large. Please help!

Having the same issue here....a quick fix is to just minimize the window, and immediately maximize it. It will now fit the screen. Trouble is, after you close it, you'll have to do it again when you re-start itunes. The good news is it takes all of about 2 seconds. Apple should fix this. Should.

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Can't figure out why colors don't totally change when you select type with curser? It looks like it has by looking at it, but when you highlight the area after the old color is still there. It happens with objects to. Driving me NUTZ. Help!

Select the text, and open the Appearance palette (Come on guys, text highlight is irrelevant, it happens to objects too says the OP), and see what's listed there. For a simple text object, there should only be a line item "Type", followed by "Characters", and when double-clicked the Characters line item expands to tell you the stroke and fill color. For a basic object, there should be a fill and/or stroke.
What happens sometimes, is that you end up adding extra strokes/fills to objects or text, and the appearance palette is where that will be noted. Especially when you are dealing with groups, and/or picking up a color with the eyedropper, you may inadvertently be adding a fill or stroke on top of something. You can drag those unwanted thingies from the Appearance palette into its own little trash can.

Why is the video on my phone not changing when i flip my phone?

I have the iphone 5 and ever since i updated it with the new os , the videos on my phone dont change when i change the position of my phone. i have tried to restore it as well but still the same. earlier i used to be able to change the position of my screen. please help.

Hey there Sparkly3gs,
It sounds like your camera is not rotating as expected in the camera app. I want to recommend starting by quitting the running apps on the phone.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
I would suggest before restoring from your backup setup the device as new and make sure the camera functions as expected. Then restore from your backup and verify it still works.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Why do Certain fonts change when I convert to PDF from Microsoft word? They start out 60s chic and end up as a standard font.

Why do some fonts change when converted from Microsoft word to PDF? It starts out as 60s chic and changes to standard font.

Related to the question, I suspect you have licensed fonts that cannot be embedded. Thus, the PDF is using what it is finding to be an equivalent as well as it can guess. Did you check the font list in the PDF?

When i change permission of folder why it doesn't change the permission inside that folder?

When i change permission of folder why it doesn't change the permission to inside files of that folder?

have to select "apply to enclosed items" options

I am able to change and add bookmarks, but these changes are sometimes not saved when I restart Firefox.

Since updating to Firefox 4, changes to bookmarks are saved sometimes after restart, but not usually (maybe 25% of the time). The problem sounds exactly like what is described on the [[Bookmarks not saved]] help page, yet after making all the recommended changes, the problem persists. I have also performed the recommended actions on the [[Toolbar keeps resetting]] help page, with no luck there either.
The only other thing that I can think of that may be helpful is that I use Firefox Sync between two computers, and both seem to be having this problem.

I have some more information, in case it helps. During one Firefox session, I made about 8 changes to my bookmarks.When I restarted Firefox, the first few changes I had made were saved, but the rest were not. Additionally, the favicons that were present during my last session (that I hadn't had before that session) were reverted to the default favicon. I hope this helps!

Why does planning indicators change when the safety stock change?

Hai All,
I created a BOM for a finished material (FM1)and entered another finished material(FM2) in item list.
Now in MRP, I did single item multi level planning for the FM1. I checked the planning file entry through MD21 and it has NECH and NECPL marked. I checked for FM2. None of the indicators are set. Then I have been to material master for FM2 and in MRP2 screen and changed the safety stock to 950. Then I checked the plannig file again and I see the indicators NECH and NETPL are checked. I then made the safety stock 0 and checked the planning file. There is no change.
My question is why were the indicators NETCH and NETPL checked when I increased my safety stock for material FM2 from 0 to 950?
I understand that NETCH is the planning for Net changes and NETPL is for planning for changes in a horizon.
Are these indicators set because I made a change to the material? or is there any other reason?
Thank you.

Visu
The planning indicators change when there is an amendment to the planning situation that requires MRP to replan a material. Essentially, by upping your safety stock from 0 to 950 you are requesting that the MRP system replans that material to ensure that there is sufficient safety stock available.
Hope this helps
Ian

Default printer on domain computers changes when print spooler is restarted

Hi.
It has been brought to my attention that all of my Windows 8.1 machines on our domain change their network default printers when the print spooler is restarted. Printers are being assigned by group policy, using the print management tool, as Branch
Office Direct IP printers.
A little bit of research indicates that the default printer is changing "BY DESIGN!!!???" to the last printer being assigned in the OU. Gotta say....if this is by design, it's a bad design! As well as unacceptable. Then I discover
that the default printer precedence is something like 1. Locally installed printers, 2. Software installed printers, 3. Network printers in reverse order that they are assigned in the OU. COME ON!! I.e., changing the order of assignment in the
OU is useless because local printers and software installed printers are still taking precedence, and on every log in the users default printers are being changed to something as useless as WebEx Document Loader.
I know this is a radical thought.....but how about if the default printer stays set to whatever the user sets it to?? That way, they won't hate me and curse me. Selfish, I know.
I am shocked by the lack of information that I am finding for this simple and sensible option, and am accordingly loosing faith in Microsoft by the day, and beginning to feel that the end really is nigh for this platform, because I seriously don't appreciate
absorbing hostility that is better directed at them, and self-preservation instincts do eventually kick in.
Can somebody tell me how to prevent user selected default network printers on domain computer's from changing when the users log off, before the lynch mob gets here?
To be clear, these are domain computers. Users are not administrators. Printer assignments are made via group policy. Users do not wear glass slippers (so solutions requiring manipulation of special footwear will not be effective).
THANKS

Hi,
Please refer to this similar thread Althornin's solution to add the registry to see if it could be fixed.
Go and edit the users registry hive:
HKEY_USERS\USERS_SID_HERE\Printers\Connections
Found old printer connections there that were no longer valid. Upon clearing those out, after a reboot, the problem went away.
I also cleared out the HKEY_USERS\USERS_SID_HERE\Printers\Settings key - the users had old printer setting sid there also.
https://social.technet.microsoft.com/Forums/windows/en-US/316fd408-4957-43b1-92e3-8dda96dcdded/default-printer-keeps-changing
Karen Hu
TechNet Community Support

Why does my font/text change when I switch from Classic 3D to Ray traced 3D in After Effects?

My font/text changes when I switch from Classic 3D to Ray traced 3D. Why is it doing this? Also, I cant get the font/txt to look the same after I switch from Classic to Ray traced. How can I get it to look the same?

I am pretty new to After Effects so I hope it's not my inexperience that's causing the problem. (It probably is)
I just updated to the most current version of AE.
I am on a mac pro late 2013 12GB 6 core. Running OSX 10.9.4
Okay so after looking at it a little closer, I think the color is what mostly changes. The first screenshot is the what the text look like with Classic 3D and the second screenshot is what it looks like after I change it to Ray traced 3D. Also under the "Mode" section..the pull down that says "Normal" disappears. I'm wondering why the font color is changing?

Why is it when I select my personal preferences/user/login items, that when i select the check box for items to NOT pop up on my dock when i restart and start my macbook air 11 inch that they still continue to?

why is it that every time i start up my macbook air and when i restart it, that the new office with word and those three other apps constantly pop up? even though i went to personal preferences/users/login items, and selected the box that clearly says "items to NOT be brought up when logging in" ?

If you don't want to start Office automatically when your Mac starts, see > http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/how-do-i-prev ent-microsoft-office-2011-word-from/dd5b8b17-8397-4e7c-b635-79b9c976c4ab?msgId=f 00ac42a-e4fe-43aa-83d7-16ccd35a0d8a
Also, on System Preferences > Users & Groups > Login Items, select all items related to Office and press - button to delete them

HA enqueue ID changes when ASCS restarts, why??

Similar Messages

Maybe you are looking for