HA Events with RAC

Is anybody familiar with the HA Events and RAC?
I use a RAC with 2 instances. After shutting down the instance to which my client is connected, I would expect that the lost connection pool is recreated automatically on the surviving instance. But it isn't.
Using HA Events in the connection string, I receive a failover event on the connection after the instance shutdown. But only 6 minutes later.
6 minutes seems useless to me, maybe it relates to the connection pool management cycle which is 3 minutes according to the documentation.
After doing the failover, the connection pool is not recreated either.
e.g. if I had 3 connections on the crashed instance, I only see 1 connection after the failure (looking at v$session).
I don't think, that this is a setup or configuration problem.
Has anybody some experience on this and can tell me how the HA Events are supposed to work?
Maybe the Oracle development team can help?
Thank you.

Thank you. I would exactly expect what you mentioned.
However, I observe the following behaviour
1) shutting down my instance does not re-establish new connections on the second instance. This makes make believe that my old connection stays severed.
2) re-using my connection after the shutdown still fires a failover-event on the connection. This makes me believe that this connection is still severed. After this first re-use (and after the failover event) the connection is moved to the second instance. But this is also the case if I don't use HA Events in the connection string.
3) The only difference of using HA Events in the connection string is the fact, that I receive after 6 min. a failover-event on the connection. Without HA Events I don't receive this one, but point 1) and 2) are still the same.
This makes me believe that my setup is OK.
Do you have any other hint or tip?
Thanks so much.
Regards,
Urs

Similar Messages

In ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

in ical I just added new calendars to a pre-existing calendar group, I can make events with these calendars, but not reminders, any suggestions?

Hi,
Lion has changed the way reminders (todos as was) work. They now seem to need to be in a seperate calendar.
In iCal open the File menu and select New Reminder List... and select where to put it.
Best wishes
John M

Is there a way to delete all events with the same title (not added as reoccurring) without deleting one at a time?

i currently have a calendar synced that has events scheduled in perpetuity, scheduled as individual events. I would like to delete all events with the same title. I do not want to delete the entire calendar nor do I want to go into every event and delete individually. These were not scheduled by me so I do not know how they were added one by one and go on forever but they are NOT scheduled as reoccurring and thus must be modified individually.
I can do a search and find all events, is there a way to just delete all events with the same title all at once?
this is a Microsoft outlook synced calendar and I am seemingly unable to delete the events all at one time from Microsoft as well.
Please help!

If you still have access to the Outlook calendar in Outlook, I would delete them from there. There are a number of ways to do that, but if you open the individual event in Outlook, does it show a repeating pattern? If not, then you may have to delete them individually, but that is not that difficult either. Go into the calendar and then change the view to a list view. From there you can sort the view according to subject. This should bring all of these same appointments together in the list and you can select the group in Outlook and delete them. Once you do that, you can change your view back and then sync the phone. That will remove the events from the phone.

Problems with RAC and XA: Fallback

Hello,
we are seing problems with RAC and XA (Tuxedo 11, DB 11.2), specifically encountering "ORA-24798: cannot resume the distributed transaction branch on another instance".
The first scenario relates to fallback after a RAC node failure. There are two servers, S1 and S2. S1 makes an ATMI call to S2. Both servers are in the same Tuxedo group, using TMS_ORA. RAC is set up for failover (BASIC), no load balancing.
The sequence is:
- S1 and S2 are connected to the same RAC node n1. All is well.
- RAC node n1 fails. S1, S2 and the TMS_ORA all fail over to RAC node n2. After the failover has happened, all is well.
- RAC node n1 recovers. All is still well (as there is no automatic fallback).
- S1 (or S2) is restarted (either intentionally or because of a crash). Since n1 is up again, S1 connects to n1. Now we get ORA-24798. Permanently.
S1 is connected to n1 and S2 is connected to n2. Since both are in the same group, both use the same XA transaction branch. When called, S2 attempts to JOIN the transaction branch that S1 started. But the DB (11.2) does not allow the same branch to span more than one node. Hence the ORA-24798.
This seems to be a severe limitation in the combination of Tuxedo, XA and RAC. It basically means we still have to use DTP services, even with Tuxedo 11 and DB 11.2. Or are we missing something?
We could put S1 and S2 into different groups, but that seems to be inefficient, and not practical for a real application (10s of servers).
I am extrapolating from this that RAC load balancing would also not work, as S1 and S2 could be connected to different RAC nodes.
Roger

Roger,
When using an external transaction manager such as Tuxedo you should still declare Oracle services as DTP services when using Oracle Database 11g. The Tuxedo documentation is not clear about this. The relevant 11gR2 RAC documentation is at http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/hafeats.htm and states
"An XA transaction can span Oracle RAC instances by default, allowing any application that uses the Oracle XA library to take full advantage of the Oracle RAC environment to enhance the availability and scalability of the application.
"GTXn background processes support global (XA) transactions in an Oracle RAC environment. The GLOBAL_TXN_PROCESSES initialization parameter, which is set to 1 by default, specifies the initial number of GTXn background processes for each Oracle RAC instance. Use the default value for this parameter clusterwide to allow distributed transactions to span multiple Oracle RAC instances. Using the default value allows the units of work performed across these Oracle RAC instances to share resources and act as a single transaction (that is, the units of work are tightly coupled). It also allows 2PC requests to be sent to any node in the cluster.
"Before Release 11.1, the way to achieve tight coupling in Oracle RAC was to use Distributed Transaction Processing (DTP) services, that is, services whose cardinality (one) ensured that all tightly-coupled branches landed on the same instance—regardless of whether load balancing was enabled. Tightly coupled XA transactions no longer require the special type of singleton services to be deployed on Oracle RAC databases if the XA application does not join or resume XA transaction branches. XA transactions are transparently supported on Oracle RAC databases with any type of service configuration.
A"n external transaction manager, such as Oracle Services for Microsoft Transaction Server (OraMTS), coordinates DTP/XA transactions. However, an internal Oracle transaction manager coordinates distributed SQL transactions. Both DTP/XA and distributed SQL transactions must use the DTP service in Oracle RAC."
This issue came up earlier this year in another newsgroup thread at https://forums.oracle.com/forums/thread.jspa?threadID=2165803
Regards,
Ed

How to Configure a oracle R12 with RAC on two different system .

I have one laptop and one desktop
Laptop----
on laptop I have install vmware 8
Host OS --win7
Guest OS---linux 4
Desktop ---
On Desktop I have install Vmware 8
Hosts OS --- Win XP
Guest OS ---Linux 4
Plz suggest How configure oracle R12 with RAC using both system .

Hussein Sawwan wrote:
on laptop I have install vmware 8
Host OS --win7
Guest OS---linux 4
Desktop ---
On Desktop I have install Vmware 8
Hosts OS --- Win XP
Guest OS ---Linux 4
Plz suggest How configure oracle R12 with RAC using both system .If you want to configure RAC, then you must have the same OS installed on all RAC nodes -- See (RAC: Frequently Asked Questions [ID 220970.1], Does Oracle Clusterware or Oracle Real Application Clusters support heterogeneous platforms?) for details.
Once you have the same OS, please refer to:
Oracle E-Business Suite Release 12 High Availability Documentation Roadmap [ID 1072636.1]
Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]
Thanks,
HusseinHi Hussein,
For Rac I am using both same OS (linux 4) for both nodes .
Plz suggest its possible to install two nodes on different machine(diiferent virtual machine on different system ) .Can communicate both machine without any problem if its possible plz provide links.

HT4890 Can I share a specific event with friends on iCloud via Photostream?

Can I share a specific event with friends on iCloud via Photostream?

No, not until iOS 6 comes out.

How to move Projects and Events with iPhoto video included in iMovie '11?

I work with a group of educators using iPads for video. One method for getting their clips into iMovie '11 is via iPhoto and then using the iPhoto Video link in iMovie to get the footage on a timeline (trying to import directly into iMovie '11, using the iPad as a "camera", has proved inconsistent, especially with footage from iStopMotion or Filmic Pro 1 and 2).
The problem is, when it comes time to copy or move an event and project, the iPhoto clips don't come along; they are dependent on the iPhoto library, so you can't continue editing on a different machine. I tried File > Consolidate Media, but it was inactive (in my test project, all clips came from iPhoto). If I look at Reveal in Browser, it goes to the bowels of the iPhoto library. If I copy the project to another drive, it too, points to the iPhoto library (if I'm on the same machine; otherwise it doesn't see it). I also tried optimizing the footage in the hope that it would create an Event with optimized clips that I could then transfer.
Am I missing something? It seems nuts that you can't transfer work to another machine without manually picking through the bowels of iPhoto. These days, lots of shooting is done on iPads and iPhones. Any help would be appreciated.

My suggestion would be that in the future, they upload photos only to iphoto, and upload video clips directly to iMovie. In the early days of iOS, going through iPhoto was the only way, so it is a habit that I have had to break.
With iOS 5 and 6, iMovie now recognizes the iPhone and the iPad as cameras.
I agree that the Consolidate Media command should bring over iPHoto movies along with the photos. I suggest that you go to iMovie/Provide Feedback and let the developers know that you would like this feature.

How do I split a single event with many clips into multiples events, one event per date?

I archived the video from my AVCHD camera into a Final Cut video archive. Later I imported this into iMovie. All the clips from this archive (spanning several months) are dumped into a single event. If I recall, older versions of iMovie would import video into separate events for each day. Then I would go through and give each event a meaningful name (e.g., "Mary's Birthday").
This is what I would like. Is there a way to split this very long event into multiple events, one for each day that is present in the event?

Not automatically but with imovie 10 you can create new events with any name you like then move clips into them from other events (Just like FCP 10.1). See:
http://help.apple.com/imovie/mac/10.0/#mov1d890f00b
You can also choose to display clips in an event grouped by date.
Geoff

I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. What can I do?

I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You

I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos. I can stand to re edit one or two projects, but not ALL.

Can I set up new events with leaps?

I've tried to set up some Maya calendars on iCal without success. My idea has been creating a group of calendars made up by "full day" events, in which every event represents a day, and every calendar, a count. The point is that in those calendars there are always leaps that are repeated every while, and as far as I've done, after a leap happens, I must re-start to create the same events. Am I clear?
Let's make an example. Imaging a calendar made up by four days (too short, but its for the example). I have created an iCal calendar with four events, and each one is set up to be repeated every four days; till this point it works as desired. But there's a leap of one day that happens every year, and I haven't been able to set it up; after erasing the event of that day, I must re-start to set up the future (four, for this example) events... Can't I set events with leaps on iCal?
I've also thought about another possible way to set a calendar like that. I found a table for finding out the correspondence between Gregorian calendar and a 260 days Maya Calendar, by making an adding. There's a number for each month of the year, and also every year has a number. You have to add the number of the month plus the number of the year plus the number of the day of the month, and only if it is higher than 260, you will need to subtract 260; thus you will know which of those 260 days is today (or another date).
So, if I can set an iCal calendar using something like "if today is 2nd =2, of June =151, 2011 = 7; add 2+151+7; and if answer is higher than 260 subtract 260; so day number is 160". I could also set some other calendars from that one, like "if answer is 109 or 110 or 111 or 112, then "codon" number is X. Any suggestion for creating an iCal calendar like that from other way, like Developer Apps? Or if not for creating an iCal Calendar, maybe for making a Widget?
Thanks for your attention.

Am I not clear? I guess I got excited trying to be clear explaining details... But got dark!
And if I just say, Can I create an iCal Calendar event, set up to be repeated every monday, but after a specific date, be repeated weekly every tuesday? If not on iCal, another advice?
Thanks in advance!

Moving event with mouse in iCal gives me problems on Nokia N96

When I move an item (event) with mouse in iCal, and then iSync to my Nokia N96, I get multiple events in the Nokia Calendar. As if I copy-pasted the item too many times.
The multiple events are on the hours, on which I have dragged around the event.
Somebody having similar issues?

i've been having the same prob as u with my N96 however after i reverted back to factory settings and it's behaving for the time being (touchwood) i've read on posts here that people r having the same prob with their 2nd even 3rd phones so unless u r planning to change ur's for a diff model i'm not sure how helpful replacing the phone will be. I along with many others 'am sure r waiting for the new firmware to come out which hopefully will sort out most of the stability issues. i contacted Nokia and they advised me to wait till the firmware update as well.
i hope this helps.
BE THE CHANGE YOU WISH TO SEE IN THE WORLD - MAHATMA GANDHI
N96-1, Ver. 12.043, Unbranded, Made in Finland.

Unable to edit "calendar" field of events with invitees

I am having a couple problems with the "calendar" drop-down field on calendar events.
This is on a 4S, iOS5, syncing calendars with iCloud.
If I create an event with an "invitee" (or add an invitee to an existing event), I can no longer change the "calendar" field of that event. In fact, the "calendar" drop-down doesn't even appear on the iPhone calendar app's "Edit" dialog for events that have an invitee. I can still change it via the web interface at www.icloud.com, and the change is even pushed to the iPhone. But on the iPhone itself, I cannot find a way to change the "calendar" field on an event that contains one or more "invitees".
Second, if I receive an "invitation" from someone else, I cannot find a way specify which of my calendars I want the event on when accepting it. I would expect it to go to the calendar I have defined as "default" in Settings, but it seems instead to go to the last calendar I created. And after accepting it, I cannot change it because the "Edit" dialog doesn't display the "calendar" field, as mentioned above. Again, I can change it via the web interface at www.icloud.com, but cannot find a way to change it directly on the iPhone.
Am I missing some way to edit/change the "calendar" field of an event with invitees? Or to select which calendar I want events to be on when I "accept" invitations from others?

I have the same problem. I recently updated to iOS5 and set up syncing through iCloud.
I was able to add one event into my iphone calendar app, but for the next event that I tried to add, there was no longer the option to choose a calendar and when I tried to add it by tapping "Done," an error message came up: "No calendar is set". and there was no way to select a calendar.
I was able to add the event on my Google Calendar on my laptop (PC), and it synced automatically, but I wasn't able to add any events from the iphone itself because "no calendar is set".
I tried turning off and on the phone and syncing back to my laptop, but the problem persisted.
I deleted the iCloud account on my iphone, and that seemed to fix the problem; I'm able to add events again from the iphone and it's syncing to my Google Calendar.
I then signed on to iCloud and setup syncing again, but turned off syncing everything except photostream, documents&data, and find my iphone since everything else would sync to outlook or internet explorer, neither of which I use.
That might have been the problem. For PC, iCloud will only sync to Outlook and Internet Explorer, and I don't have Outlook setup (can't connect to my work's email server with my account and the IT guys don't know how to fix it or they're too lazy to troubleshoot) and I only use Firefox and Chrome. Since iCloud isn't syncing to any calendars on Outlook, there aren't any calendars set...
I just did this a minute ago and everything seems to be back to normal, including the ability to choose a calendar when adding events.
I'll have to see if it the problem comes back

HT202297 iCloud calendar unable to set events with reminders that work, despite ignoring the error message

I am using Outlook 2007, Windows 7, updated iCloud Control Panel. 2 office computers and multiple mobile devices are sharing Calendar/Contacts/Tasks. One office computer, and the mobile devices seem to have no issue setting up a new calendar event with a reminder - the reminder goes off as planned, syncs with iCloud, and is picked up by the other office computer and mobile devices.
My office computer can create iCloud calendar events, but when i attempt to set a reminder it gives me the 'The reminder for xxx will not appear because the item is in a folder that doesn't support reminders. Is this OK?' message. The help section on this site states that I can just ignore that, and the reminders will still be set up and work nonetheless. They don't. I also notice that despite being inside the iCloud calendar, as opposed to the local Outlook calendar on my PC, it still gives me the option to 'Move to iCloud,' as if I wasn't creating the event in iCloud. Yet if I set a new reminder, the event sticks, syncs with iCloud and will pop up on other devices. If I click the 'Move to iCloud' option that oddly appears in the created calendar event, it glitches out and crashes outlook. Tried this multiple times, and, oddly enough, one time it rebooted Outlook and seemed to be creating iCloud calendar events with reminders just fine. The 'Move to iCloud' option had disappeared and the reminders would stick. After the next computer restart, I was back to square one and it would no longer accept calendar reminders and the 'Move to iCloud option was back.
The reminder seems to the the only function that doesn't work. I've re-installed iCloud Control Panel, restarted all involved applications and the computer. There seems to be a partial disconnect from the iCloud calendar in my Outlook and the iCloud calendar; some functions work fine and sync, some are glitchy and do not function properly, and it is only this one device out of 2 PCs, an iPhone, and an iPad that has issues.
Any ideas?

paule54600 wrote:
yes but if you don't have a gmail calender setup when you install the account for the first time I don't think it sees the calender if you try to access it later. Either way I can't get it to work on my newly updated droid 2. How do I "reset" the phone and what will I have to reconfigure once I do that?
Hi Paul,
I don't know about your phone, but on my Droid Pro, there is a little round white button underneath the battery, press that with a stylus, or the tip of a pen, then reassemble the phone and turn it on. That's all there is to it. I didn't have to re-configure anything. Check your user manual for your reset button location, it's probably in the section on troubleshooting.

I am trying to sync my iphoto events with my iphone, but when i do, it says the required file cannot be found.. how do i solve this problem?

i am trying to sync my iphoto events with my iphone, but when i do, it says the required file cannot be found.. how do i solve this problem?

Try erasing the iPod photo cache.
http://support.apple.com/kb/ts1314

Splitting an event with only only clip

Is it possible to split an event that contains only one clip into two events?
Documentation indicates that in an event with at least two clips it is possible, but with only one clip selecting a thumbnail where the split is desired leaves the 'split at clip' option under the file menu grayed out.

If you can find a single frame or group of frames that can be rejected (and are near the point where you want to split), reject them and move to trash. Now you will have two clips, and it can be split into two events.
If you don't want to lose any frames, best option is Quicktime Pro.

HA Events with RAC

Similar Messages

Maybe you are looking for