HA Installation of ERP 6 With SQL 2005 Server Problem.
hi ,
i have two blade server with windows 2003 Enterprise and cluster configure on them as prescribe by the note of Microsoft.
now i have installed MS Sql 2005 Server as said by the SAP Documentation on first node and it was sucessfull . after that i installed ABAP (ASCS) SCS on first node and it was installed too . now i am stuck at the process of FIRST MSCS NODE step
the installation note says :-
7.4.5Configuring the First MSCS Node
To configure the first MSCS node so that it functions properly in MSCS, you have to run the cluster configuration option offered by the SAPinst tool. When you run this option it:
Creates the SAP cluster group
Copies tools to the SAPCluster directory
Sets the SAPService to manual
Makes sure that the SAPOsCol service starts from the SAPCluster directory
this says cluster configuration option but i can't find it any where and i don't know how the %windows%/sapcluster dir creates do i have to create it manually if so then how, the sap document says as follows :-
SapCluster Directory
In an SAP cluster installation, an additional directory u2013 %WINDIR%\SapCluster u2013 is created under the system directory.
This contains all the SAP files required by all MSCS cluster nodes, independently of the MSCS node the SAP instance is running on. The files are database tools and program files (executables) used by the operating system monitor (SAPOsCol).
The directory is added to the path variable of the user <sapsid>adm.
can any one help me in this .
thanks in advanced
thanks for response , at the phase FIRST MSCS NODE it stuck
the R3CLUS.LOG file is as follows :-
24.8.2010, 13:14:26, ntclsapclus.cpp, 213, Entry: InstallSAPResourceType
24.8.2010, 13:14:26, ntclsclinst.cpp, 58, Entry: Sclinstsrct::Create
24.8.2010, 13:14:26, ntclsclinst.cpp, 79, CreateClusterResourceType RC= 183
Cannot create a file when that file already exists.
24.8.2010, 13:14:26, ntclsclinst.cpp, 91, DllRegisterCluAdminExtension RC= 0
24.8.2010, 13:14:26, ntclsclinst.cpp, 102, DllRegisterServer RC= 0
24.8.2010, 13:14:26, ntclsclinst.cpp, 116, Exit: Sclinstsrct::Create RC= 0
24.8.2010, 13:14:26, ntclsapclus.cpp, 215, Exit: InstallSAPResourceType RC= 0
and SAPINST.LOG file say's in last lines:-
INFO 2010-08-24 13:15:26.655
Execute step dGetSAPClusterParameters of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0
WARNING[E] 2010-08-24 13:15:26.670
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
ERROR 2010-08-24 13:15:26.824
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
and SAPINST_DEV.LOG say's in last lines :-
WARNING[E] 2010-08-24 13:15:26.670
CJSlibModule::writeError_impl()
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
TRACE 2010-08-24 13:15:26.793 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2010-08-24 13:15:26.824 [sixxcstepexecute.cpp:950]
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
TRACE 2010-08-24 13:15:26.840 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > MS SQL Server > High-Availability System > First MSCS Node. You can now: </p> <ul> <li> Choose <i>Retry</i> to repeat the current step. </li> <li> Choose <i>View Log</i> to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/HA/MSCS-A.
TRACE 2010-08-24 13:15:26.840 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
help needed........
Edited by: Eric Brunelle to fix HTML tags on Aug 24, 2010 9:15 AM
Similar Messages
-
IPC 4.0 Standalone with SQL 2005 Express as a database
Hello,
I am trying to setup IPC 4.0 standalone up for a training class on a XP laptop with SQL 2005 Express as the database. I keep getting login errors connecting the IPC admin.bat tool to the sql database. And yes, I know this is not 'officially' supported by SAP, but I see no technical reason why it shouldn't work and yes my port is correct. My entries are as such:
Alias: 00_230
Server: localhost
System: Microsoft SQL Server
Database Name: 00_230
port: 1433
User: ipc
password: hidden
client: 230
Is everything I entered correct? Am I missing anything that I need?
Thanks!Hi Jeff.
You will probably have problems with the database subsystem, when you upgrade to UccX7.0.1 if the 3rd party database is af SQL2k5 server.
There is a fix for that problem, check below :
Upgrading UCCX to 7.0(1)Sr4 is failing ODBC connection to SQL 2005.
Symptom:
Upgrading the UCCX server to 7.0(1) Sr4 and OS to 2003.1.4a SR11 is failing the ODBC connection to SQL 2005 external database. (also a problem in new installations)
The error generated when trying to setup a ODBC connection to SQL 2005 database is
======
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
=======
Conditions:
Upgrade to UCCX 7.0(1) Sr3 or 4 and OS upgrade to 2003.1.4a SR11
Workaround:
Work around:
a) In UCCX SQL Server 2000 - Start the Client Network Utility. (cliconfg.exe is used from MSDE versions of UccX)
b) On the General tab, add TCP/IP in the list under Enabled protocols by order. (make sure its first)
c) Click the Alias tab, and then click Add. Under Network libraries, select TCP/IP.
d) In the Server name text box, type the IP address of the server that is running SQL Server
2005.
Note:
If port other that 1433 is being used Click the check box to clear the Dynamically determine port option, and then type the port number of the instance of SQL Server 2005 in the Port number text box.
Regards
\Søren Lavard -
IPCC 4.0(5) with Sql 2005 Enterprise DB
Hello,
I currently have IPCC 4.0(5) (no SR) doing with an ODBC connection to a SQL 2000 server. I am preparing to upgrade the SQL 2000 server to SQL 2005 (only upgrading a SQL server, not touching SQL 2000 running on IPCC).
According to the document in the link below, support for SQL 2005 as an enterprise db was not posted until IPCC 4.0(5) SR2. I will be upgrading to IPCC 7.x very soon, but need to buy time and avoid touching IPCC 4.0(5). Does anyone know if the ODBC connection from IPCC 4.0(5) will connect to a SQL 2005 server?
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crsmatrxeol.pdf
Thanks,
JeffHi Jeff.
You will probably have problems with the database subsystem, when you upgrade to UccX7.0.1 if the 3rd party database is af SQL2k5 server.
There is a fix for that problem, check below :
Upgrading UCCX to 7.0(1)Sr4 is failing ODBC connection to SQL 2005.
Symptom:
Upgrading the UCCX server to 7.0(1) Sr4 and OS to 2003.1.4a SR11 is failing the ODBC connection to SQL 2005 external database. (also a problem in new installations)
The error generated when trying to setup a ODBC connection to SQL 2005 database is
======
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
=======
Conditions:
Upgrade to UCCX 7.0(1) Sr3 or 4 and OS upgrade to 2003.1.4a SR11
Workaround:
Work around:
a) In UCCX SQL Server 2000 - Start the Client Network Utility. (cliconfg.exe is used from MSDE versions of UccX)
b) On the General tab, add TCP/IP in the list under Enabled protocols by order. (make sure its first)
c) Click the Alias tab, and then click Add. Under Network libraries, select TCP/IP.
d) In the Server name text box, type the IP address of the server that is running SQL Server
2005.
Note:
If port other that 1433 is being used Click the check box to clear the Dynamically determine port option, and then type the port number of the instance of SQL Server 2005 in the Port number text box.
Regards
\Søren Lavard -
Crystal 8.5 connection with Sql 2005
Post Author: sgtpep
CA Forum: Semantic Layer and Data Connectivity
Hello all,I'm not sure this is the right forum group to post in, but here it goes:I have a problem when trying to print my crystal 8.5 reports through a sql 2005 native client.Some of them work just fine, but i get this error: "print job failed cannot open sql server" for others.I've been doing a little research, but i can't seem to find a definitive answer on this topic: Can/Does crystal 8.5 work with sql 2005 databases.I did find something about upgrading my drivers, but i'm not sure where to find them and what i should be looking for.Thanks in advance for your help,EricI see - the field notice does mention ICM 7.2(7)ES139.
Multiple occurrences of this issue have been observed since October 14, 2010
and on all Unified ICM/CCE releases. This is not a regression defect. The issue
occurs when a Microsoft SQL Server query operation is performed to compare the
'lastUpdateKeys' on AW and Central Controller/Logger, during the incremental
copying of configuration changes to the local AW. In addition, using the ICMDBA
tool to backup and restore the database with "Truncate Config Message Log"
option checked can lead to a similar issue that causes the ICM/CCE Router to
reject configuration updates. No UpdateAW restart is observed in this
situation.
I mistakenly thought it was caused by the SQL upgrade from 2000 to 2005.
By the way, regarding defect CSCtj65060, I NEVER check that "Truncate Config Message Log" option when exporting the config.
Regards,
Geoff -
Failed to Establish Connection with SQL Database Server (EAS)
Hi,
We have recently installed version 11.1.2.1 of essbase. Everything is working just peachy. One of my users tried to build a load rule using an Oracle ODBC data connection and gets the error:
Failed to Establish Connection with SQL Database Server. See log for more information.
When I look in the log I see this:
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1013091)
Received Command [SQLListDsn] from user [mressler@EnCanaAD]
[Tue Feb 28 09:14:43 2012]Local/Sample/Basic/mressler@EnCanaAD/4240/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1013091)
Received Command [SQLRetrieve] from user [mressler@EnCanaAD]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021020)
Cannot read SQL driver name for [Backup Exec Catalogs] from [ODBC.INI]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021004)
Connection String is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021041)
Connection String is [DSN=Test;UID=...;PWD=...;]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021006)
SELECT Statement [SELECT '1' from dual] is generated
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Tue Feb 28 09:15:03 2012]Local/Sample/Basic/mressler@EnCanaAD/5228/Warning(1080014)
Transaction [ 0x140002( 0x4f4cfd87.0x7b890 ) ] aborted due to status [1021001].
I have tested that the ODBC connection can connect to the database. The sql query has been dumbed down to select '1' from dual. I have not included the word "select" in the query.
Anyone seen this before? We are in the process of uninstalling the Oracle client completely and re-installing it to see if this solves the issue. We only installed the 64 bit version of the Oracle client. I am running on Windows Enterprise 2008 R2 - 64 bit. EAS, Essbase, EIS are all 64 bit installs. I believe Studio is the only one that is 32bit. However we are not currently using this product.
Thanks,
MikeHi Mike,
With Oracle Support's help, we got 3 of the 5 servers working now. We were using the Datadirect drivers but were configuring them wrong! You have to use the Standard Connection portion in the setup, specifying the Host, Port Number (1521) and the SID. We were using the TNSNames Connection which worked in the past, but apparently does not now.
So I am down to 2 servers not working. They are both Windows 2008 R2 Enterprise 64 bit, running Oracle EPM Essbase 11.1.2.1. When I Open SQL in EAS it prompts for database (Essbase Server, App, DB) and when I hit ok it pops up with "Network error: Cannot Locate Connect Information For []". We did not do any of the suggestions in the document you linked to get the other 3 servers working. When you hit ok on that error, you then get another error stating, "There are no Data Sources defined. 'SQL data sources' option will be disabled". We do have datasources defined on the server.
Any ideas?
Thanks,
Mike
Edited by: Mike on Mar 1, 2012 8:38 AM -
SQL Express 2008 R2 and SQL 2005 Server SP1 in single Windows 2003 server
Hi,
I am using a Windows Server 2003 R2 Enterprise Ed SP2 OS with SQL 2005 SP1 intallled on it for our Nav 5 database.
As my backup software requires SQL Express 2008 R2 as default daabase, is it possible to install this in the same server with the SQL 2005 currently running on it? Would there be any impact on the existing SQL 2005 and the application and the Navision database
on it?
Appreciate your help.
Sharon LoHi,
I am using a Windows Server 2003 R2 Enterprise Ed SP2 OS with SQL 2005 SP1 intallled on it for our Nav 5 database.
As my backup software requires SQL Express 2008 R2 as default daabase, is it possible to install this in the same server with the SQL 2005 currently running on it? Would there be any impact on the existing SQL 2005 and the application and the Navision database
on it?
There is no issue with installing multiple versions of SQL Server on a machine.I have SS 2005 ,2008 R2 and 2012 all on same machine and they work just fine. You can install all version instances side by side and all will work independently from
each other.
Now issue which might cause problem your SQL Server 2005 is SP1 which is a Blunder IMO. Please ASAP patch it to SP4 because you are running very old version of 2005 which is unsupported by Microsoft and also SP4 includes MANY fixes for SQLServer
2005. Applying SP4 will fix many issues and will bring you under Microsoft support.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Web Dynpro using EJB to implement database access for MS SQL 2005 server
Hello,
For using EJB model in Java Web Dynpro, why do I need another dictionary project with all the required tables (there are 5 tables in my project), when the same database is already created in back end MS SQL 2005 Server.
Thanks
SrinivasThanks for your reply Charan,
I am fairly new to EJB. I have created only one session bean (called TrainingBean) and created all the business methods inside it.
Here is my database schema, with the following 5 tables
Courses
CourseSchedules
Students
Registrations
Competencies
Here are the session bean business methods:
changeCourse(String)
changeStartDate(String)
createCourse()
createCourseSchedule()
getCourses()
getCourseSchedules()
registerStudent(String)
unRegisterStudent(String)
Is this good way to implement EJB, or should I create multiple session beans and multiple corresponding Data access command beans ?
Thanks a lot
Srinivas -
Fetch the data from the tables in the SQL 2005 server to sap R/3.
Hi Experts,
We need to fetch the data from the tables in the SQL 2005 server to sap R/3.
Please explain which will be the best approach to fetch the same and how to do it. Sample program can greatly help.
<< Please do not offer points >>
Regards,
Shobana K
Edited by: Rob Burbank on Sep 21, 2010 2:36 PMHi,
Try NATIVE SQL statements in your abap code otherwise you can try to establish jdbc connection from ABAP program.
search in SDN for samples!
Suresh -
Failed to Establish Connection With SQL Database Server in Essbase studio
I am using Essbase Studio Release 11.1.2.1.00 for developing XOLAP cubes and deploying them on to Essbase server .
I am getting the below Error while deploying the cube onto Essbase server.
error : Failed to deploy Essbase cube.
Caused by: Failed to build Essbase cube dimension: (TimeHierarchy) .
Caused by: Cannot get async process state. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server.
From Essbase Studio -> Datasources tab, I could able to connect to SQL Database server..Please let me know how to resolve this issue.
Thanks,
SwathiThanks for the reply.
There was a problem with my Essbase Server..so now i m pointing to other server.
now I am getting the below Error:
Failed to deploy Essbase cube.
Caused by: Cannot end incremental build. Essbase Error(1025008): Join Specification near [[TIMEID]] is invalid. Please verify the Xolap Schema file.
Please let me know how can I validate my cube and what changes might require in my Cube definitions? -
Error: 1021001 Failed to Establish Connection With SQL Database Server
Hello,
Someone you already MEETS it the following error during an essbase retrieve DLR.
My client oracle essbase on my server is 64bit, Essbase 11.1.2.2 x64
I run the odbc located in% windir% \ system32 \ odbcad32.exe
"Error: 1021001 Failed to ESTABLISH Connection With SQL Database Server. See log for more information"
Here is the log:
Received Command [SQLListDsn] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local / CAS_TEST / / / 8168/Info (1042059)
Connected from [10.100.50.2]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1013091)
Received Command [SQLRetrieve] from user [admin]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021004)
Connection String is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021041)
Connection String is [DSN = TEST_ORACLE; UID = ...; PWD = ...]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021006)
SELECT Statement [SELECT from dual;] is generated
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft] [ODBC Driver Manager] Driver's SQLAllocHandle we failed SQL_HANDLE_ENV]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Info (1021014)
ODBC Layer Error: Native Error code [0]
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Error (1021001)
Failed to ESTABLISH Connection With SQL Database Server. See log for more information
[2:50:33 p.m. Fri 28 September 2012] Local/CAS_TEST/CAS_TEST/admin/8168/Warning (1080014)
Transaction [0x780001 (0x50659d19.0xc9e78)] aborted due to status [1021001].
When I try to go through OCI service name:
dbServerName: port / service_name
I have the following error message:
Solutions2: List of members 1423.CAS_TEST.CAS_TEST September 28, 2012 2:50:15 PM CEST Succeeded
Read SQL record September 28, 2012 2:50:35 PM CEST Failed
thank you in advance
Edited by: 851398 on 28 sept. 2012 06:31In essbase logs there is nothing special, same for windows log.
Everything I like is log in log view eas
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:11 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database State]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7580/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6720/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6720/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7304/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7304/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7572/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7572/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8116/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8116/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7384/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6592/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6592/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7972/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7972/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///216/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/216/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3104/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3104/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3472/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3472/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///8112/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/8112/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///4020/Info(1013205)
Received Command [Get Database Info]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3840/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3840/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7760/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7760/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7300/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7300/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7904/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7904/Info(1013091)
Received Command [OtlQuerySmartLists] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///3612/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/3612/Info(1013091)
Received Command [GetAttributeNameSpecs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///6732/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/6732/Info(1013091)
Received Command [GetOtlInfo] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7576/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7576/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST///7268/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:21 2012]Local/CAS_TEST/CAS_TEST/admin/7268/Info(1013091)
Received Command [OtlQueryMbrs] from user [admin]
[Fri Sep 28 17:52:27 2012]Local/CAS_TEST///7556/Info(1013210)
User [admin] set active on database [CAS_TEST]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST///8168/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:29 2012]Local/CAS_TEST/CAS_TEST/admin/8168/Info(1013091)
Received Command [SQLListDsn] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST///7564/Info(1042059)
Connected from [10.100.50.2]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1013091)
Received Command [SQLRetrieve] from user [admin]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021004)
Connection String is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021041)
Connection String is [DSN=TEST_ORACLE;UID=...;PWD=...;]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021006)
SELECT Statement [SELECT * from dual ] is generated
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021013)
ODBC Layer Error: [IM004] ==> [[Microsoft][ODBC Driver Manager] Driver's SQLAllocHandle on SQL_HANDLE_ENV failed]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Fri Sep 28 17:52:55 2012]Local/CAS_TEST/CAS_TEST/admin/7564/Warning(1080014)
Transaction [ 0xb50001( 0x5065c7d7.0x31ce0 ) ] aborted due to status [1021001].
Have you an idea about the Merant driver to essbase?
Thank -
Possible for AIR app connecting to SQL 2005 server
Is it possible using Flex AIR to connection to SQL 2005
server and fetch data ?
If YES, whats step / process we need to follow please.
We have the DB in sql 2005 and we want to develop desktop
client and fetch the records from DB to AIR app."kamaljeetsinghsaini" <[email protected]>
wrote in message
news:gmsmnc$non$[email protected]..
> As we know that AIR supports SQlite only but in our case
we want to fetch
> data
> from server that is using SQL 2005 as DB. So are you
saying we can
> directly
> send the HTTP service to that server and fetch data from
it ?
You can send the HTTPService request to whatever back end
technology you are
currently using to access it. For example, if you are using
ASP.net, you
would still use ASP.net, but you would send back something
that Flex
understands, such as XML, instead of the HTML that the
browser client
understands. -
Essbase Studio - Failed to Establish Connection With SQL Database Server
Hi all,
I am new to Hyperion and am having trouble deploying what seems a simple cube in Essbase Studio.
My environment is Windows 2003, EPM 11.1.1.2, SQL Server 2000.
I have the following two issues which may be related.
1. The EPM System Diagnostic tool says that Hyperion Foundation cannot connect to the SQL database.
Error:
Failed: Connection to database
Error: java.net.UnknownHostException: <server name: <server name>
Recommended Action:
Every other EPM application is able to connect to the database. I have tried re-configuring Foundation Services and checking the config files and nothing looks wrong. I would appreciate advice on how to fix this.
2 In Essbase Studio, I was able to connect to the database where the source data is, build the minischema and create dimensions and measures. But when I run the cube deployment wizard I get the error:
Message: Failed to deploy Essbase cube
Caused By: Failed to build Essbase cube dimension: (Time)
Caused By: Cannot incremental build. Essbase Error(1021001): Failed to Establish Connection With SQL Database Server. See log for more information
…ODBC Layer Error: [08001] ==> [[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied.]
I have checked the DSN as well as the connections set up within Studio, and they are all able to connect to the database. I am using the admin user for the Essbase server and have created a different user for the databases where the data resides and the shared services database. I tried using the same user all the way through and this didn’t help.
Can you please advise what else I can check or change to resolve this issue.
Also, can you work in EAS with cubes that are created in Studio? I tried looking at it and I got an error that the rule file couldn’t be accessed because it was created in Studio.
After the above failures, I tried creating a cube in EIS, with mixed success. I have been able to load the members and data without errors. But when I try to view the data in the cube, I am seeing field names for the measures instead of the data itself.
...Definitely more questions than answers at this stage of my learning.
Regards
MichelleMichelle,
I don't know if you found an answer to you question after so many months but I was hoping I could be helpful.
The issue you are experience happens often when the dimension that you are getting an error on, in this case TIME, is built from a snowflake lineage and there is a bad foreign key reference. This dimension is most like high-up in your outline build process for Essbase Studio and this prevents the build from happening usually early on.
Check your logs also. They are in Hyperion > Products > logs > essbase > essbasestudio.
You can also make your logs more verbose by setting a configuration variable in the essbase studio server.properties file but that should only be used for debugging as it really saps performance.
And, yes, you can of course edit an Essbase Studio deployed cube in EAS. However, any changes you make to the cube in EAS are subject to being wiped-out upon the next Essbase Studio deployment of that Applicaion/Database combo.
If you want to provide more detail, screenshots, etc. I would be glad to help where I can.
Cheers,
Christian
http://www.artofbi.com -
How to configure data source for MS SQL 2005 Server.
Good morning,
While creating a data source for MS SQL 2005 Server, what are the values I should use for:
Object Factory, DataSource Type, and CPDS Class Name values ?
Thanks
SeenuseenuFour wrote:
Hi,
I am working on a web application, the backend of which is a MS SQL 2005 server. I am creating a data source on the application server to manage the connection pool.
Hence I need to give the following values while creating the data source:...
Hence you need to provide some actual detail about what the context is.
IIS runs "web applications" but your question would have no meaning in that context. On the other hand it might have some meaning if you were running Tomcat. -
SPS 2003 and MS SQL 2005 Server
I have a question? Can SPS 2003 use MS SQL 2005 Server?
I am not sure what is SPS In this context, but i understand from Shanky's answer that it is an external application (dose he mean SharePoint?)
[Personal Site] [Blog] [Facebook] -
Xp_logininfo "Installation problem on windows 2003 with Sql 2005"
Hi every one
I am facing a problem during the installation of Solution Manager 4.0 on Windows 2003 server with Ms Sql 2005, I received the following error
Msg 15404, Level 16, State 19, Procedure xp_logininfo, Line 60.
Its some how look likes that the user "SID"ADM
Can any one give me a clue
thanks
Kind Regards
SohailHi All,
This would solve your problem
First of all this error is <b>MSSQL error</b>.
When you perform an action on an instance of SQL Server that requires SQL Server to resolve the credentials of a Microsoft Windows NT domain user account, you may receive an error message that is similar
Server: Msg 8198, Level 16, State XX, Procedure <Stored Procedure Name>, Line <line Number>
Could not obtain information about Windows NT group/user '<Domain\Account Name>'.
To resolve the credentials of a Windows NT domain user account, SQL Server uses the xp_logininfo system stored procedure. Here is a list of the common scenarios where you may notice that the xp_logininfo system stored procedure fails and causes the 8198 error.
When you use an xp_sendmail extended stored procedure.
When you set up replication.
When you run a SQL Server Agent job.
SQL Server may run the xp_logininfo system stored procedure to retrieve information about the Windows domains and the user accounts, even if the user does not do so explicitly. Therefore, if you receive an 8198 error message and the error message mentions the xp_logininfo system stored procedure as the procedure, you must use <b>SQL Profiler</b> to trace and to troubleshoot the exact point of failure.
You can go through this link for more info...
http://support.microsoft.com/?kbid=834124
Feel Free to Revert back...
--Thanks and Regards,
Ragu
ERP,
Suzlon Energy Limted, Pune
Extn: 2638
+919370675797
I have no limits for others sky is only a reason
Maybe you are looking for
-
Black screen in Creative Cloud app 1.8.0.447 on Windows 7
Hi! After updating the Creative Cloud application to the latest version (1.8.0.447), I have a blank black screen in the Home tab of the application. The Apps, Resources and Behance tabs work as they should. Also, I noticed that playing any one of the
-
Crop Marks on PDF docs visible in Preview
Hi There, When I view a .pdf document in Safari, I see the page(s) as I believe the author meant for them to be viewed - but when I ctl-click and open with preview, the resulting file opens and shows all the printers marks - such as registration, col
-
help
-
Calling a PL/SQL function from java
I would like to call a pl/sql function from java. My pl/sql function is taking arrays of records as parameters. How do i proceed? Which specific oracle packages do I have to import? Please send an example. TIA, Darko Guberina
-
What is a good ID5 Document Setup for an epub ebook for the iPhone?
I'd welcome some help using ID5 to create an ebook that is optimized for displaying on the iPhone. In particular, I'm looking for appropriate dimensions of the base page, in pixels, to enter in the Document Setup dialog box. From what I've read, 320