HA Installation of ERP EHP4 on AIX and DB2
Dear All,
I have to do a HA installation of ERP EHP4 system on AIX and DB2. I have followed the standard inst.guide from SAP but I want more information. Can anyone help me in understanding how to go about installing HA in detail. I would be very grateful if anyone can provide me a guide/document of what and how they have done. Can you pls explain me the steps.
I also have few questions
1. Shall i do a Central installation or distributed installation ( meaning CI, ASCS and DB in one server failover to other; CI,ASCS on one server and DB running on different server which in case of failure will move to other server)
2. I know that OS team will do the cluster configuration but is there any other software to be bought for an automatic switchover in case of failures?
3. Mainly, as a BASIS consultant what is our role in HA configuration? What file systems should be defined and nfs mounted?
Request you to take time and answer. Thanks in Advance.
Lastly, i hope this is the right forum. If not , please let me know.
Hi,
>
> 1. Shall i do a Central installation or distributed installation ( meaning CI, ASCS and DB in one server failover to other; CI,ASCS on one server and DB running on different server which in case of failure will move to other server)
>
I think you did not get basic of HA installation. Its neither central nor distributed installation. You need to install CI and Dialog Instance locally on 2 nodes. DB and ASCS instance on the disk that will move across 2 nodes.
> 2. I know that OS team will do the cluster configuration but is there any other software to be bought for an automatic switchover in case of failures?
>
OS team will do file system config so that file system having ASCS and DB should move across 2 nodes. And rest of the file system should be local.
After installation making cluster movement automatic both OS and SAP Basis guy have to work together.
> 3. Mainly, as a BASIS consultant what is our role in HA configuration? What file systems should be defined and nfs mounted?
>
I would say primary role in HA installation is of Basis guy. Because he is the person who will decide what approach will you take to install HA either active-active or active-passive. Its you on whom requirement OS guy will work.
Thanks
Sunny
Similar Messages
-
Hi,
I am due to start an upgrade project for 4.7 on AIX and DB2, the originating release of DB2 is 8.2.
But to save myself time I want to use the export of the SAP system to install it on a DB2 version 9 system, using SAPInst.
I know this is a valid operation on a Windows Oracle platform, but was wondering if there any limitations on the DB2 side of things.
TIA
ChrisThat does not accomplish anything of what I wanted.
To reduce the complexity of the upgrade, I want to use the import process to facilitate a database upgrade.
What you are proposing is a system copy, and means I will have to do a database upgrade later.
If my idea is not workable then fine, I will do it that way but you have not addressed any of the requirements I have stated in my post.
Thanks
Chris -
ERP EHP4 causing dump when posting invoice in MIRO
I originally posted this in the MM forum but was advised to move it here.
We just implemented ERP EhP4 w/SAPAPPL603 and are now getting a dump when using MIRO to posting a vendor invoice against a PO. The error seems to involve new logic for multiple account assignment introduced with this EHP. The dump is in include LMRMBWF02 of SAPLMRMBM, and indicates that data object S_MCRBPO does not contain component XHISTMA. The lines in LMRMBWF02 are (starting at 772):
FORM bw_read_co_history_dyn_sub USING event TYPE bwmode
s_index_mcrbpo TYPE eval_iv_index_key_s
s_mcrbpo TYPE mcrbitm
CHANGING s_mcrbco TYPE mcrbco.
DATA: s_ekbe LIKE ekbe,
s_ekbz LIKE ekbz,
s_ekbz_ma TYPE ekbz_ma, "MAA EhP4
s_ekbe_ma TYPE ekbe_ma, "MAA EhP4
f_arewr TYPE ekbz-arewr, "MAA EhP4
f_areww TYPE ekbz-areww. "MAA EhP4
CASE event.
WHEN c_recompilation.
IF s_mcrbco-xunpl = space.
Not for unplanned account assignments
IF ( s_mcrbpo-exkbe = 'X' ).
Read PO history for goods item
IF s_mcrbpo-xhistma = space. "MAA EhP4
...with the last line being the culprit. The actual break in execution occurs at line 119 of SAPLMRMP, BESTELLUNG_BUCHEN where function MRM_BW_PO_HISTORY is called.
Had some other errors where tables weren't properly activated after the EHP installation, but here most everything seems to be activated properly. The exception is table EKBE, which activates but with warnings about missing enhancement categories of tables or includes/subtypes for four active dependent tables. That's the only lead I've got.
Can't find any notes or other posts about this error, any ideas would be greatly appreciated!Hi,
the only thing i´ve found is this OSS Note:
https://service.sap.com/sap/support/notes/1105679
Best regards. -
ERP EhP4 causing dump in MIRO posting
We just implemented ERP EhP4 w/SAPAPPL603 and are now getting a dump when using MIRO to posting a vendor invoice against a PO. The error seems to involve new logic for multiple account assignment introduced with this EHP. The dump is in include LMRMBWF02 of SAPLMRMBM, and indicates that data object S_MCRBPO does not contain component XHISTMA. The lines in LMRMBWF02 are (starting at 772):
FORM bw_read_co_history_dyn_sub USING event TYPE bwmode
s_index_mcrbpo TYPE eval_iv_index_key_s
s_mcrbpo TYPE mcrbitm
CHANGING s_mcrbco TYPE mcrbco.
DATA: s_ekbe LIKE ekbe,
s_ekbz LIKE ekbz,
s_ekbz_ma TYPE ekbz_ma, "MAA EhP4
s_ekbe_ma TYPE ekbe_ma, "MAA EhP4
f_arewr TYPE ekbz-arewr, "MAA EhP4
f_areww TYPE ekbz-areww. "MAA EhP4
CASE event.
WHEN c_recompilation.
IF s_mcrbco-xunpl = space.
Not for unplanned account assignments
IF ( s_mcrbpo-exkbe = 'X' ).
Read PO history for goods item
IF s_mcrbpo-xhistma = space. "MAA EhP4
...with the last line being the culprit. The actual break in execution occurs at line 119 of SAPLMRMP, BESTELLUNG_BUCHEN where function MRM_BW_PO_HISTORY is called.
Had some other errors where tables weren't properly activated after the EHP installation, but here most everything seems to be activated properly. The exception is table EKBE, which activates but with warnings about missing enhancement categories of tables or includes/subtypes for four active dependent tables. That's the only lead I've got.
Can't find any notes or other posts about this error, any ideas would be greatly appreciated!Per the recommendation I've moved this thread to the ABAP forum:
ERP EHP4 causing dump when posting invoice in MIRO -
ERP EHP4 Installation Problem in Update Database registry Phase.
Hi,
We are installing ERP 6.0 EHP4 Ready SR1 on AIX6.1 (6100-03-01-0921) and DB2 v9.1.0.7.
During installation in phase Update Database Registry, we are getting below error:
SQL1042C An unexpected system error occurred
If any body has faced this error earlier, then please suggest.
Thanks
SunnyHi,
Please find below the latest entries in db2diag.log:
2009-12-14-20.15.17.555605-330 I25354A304 LEVEL: Event
PID : 630830 TID : 1 PROC : db2stop2
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:260
DATA #1 : String, 43 bytes
System controller termination is completed.
2009-12-14-20.15.17.555785-330 I25659A383 LEVEL: Event
PID : 630830 TID : 1 PROC : db2stop2
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:270
DATA #1 : String, 26 bytes
Active EDUs to be waited :
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFFCF70 : 0000 0001 ....
2009-12-14-20.15.17.565945-330 I26043A381 LEVEL: Event
PID : 630830 TID : 1 PROC : db2stop2
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:280
DATA #1 : String, 24 bytes
There is no active EDUs.
DATA #2 : Hexdump, 4 bytes
0x0FFFFFFFFFFFCF70 : 0000 0000 ....
2009-12-14-20.15.17.830570-330 E26425A301 LEVEL: Event
PID : 630830 TID : 1 PROC : db2stop2
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StopMain, probe:911
MESSAGE : ADM7514W Database manager has stopped.
STOP : DB2 DBM
2009-12-14-20.15.24.936396-330 I26727A1630 LEVEL: Event
PID : 545014 TID : 1 PROC : db2start
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, base sys utilities, sqleStartStopSingleNode, probe:1130
DATA #1 : String, 31 bytes
/db2/db2ged/sqllib/adm/db2star2
DATA #2 : Hexdump, 256 bytes
0x0FFFFFFFFFFF9C20 : 2F64 6232 2F64 6232 6765 642F 7371 6C6C /db2/db2ged/sqll
0x0FFFFFFFFFFF9C30 : 6962 2F61 646D 2F64 6232 7374 6172 3200 ib/adm/db2star2.
0x0FFFFFFFFFFF9C40 : 4E4F 4D53 4700 0000 0000 0000 0000 0000 NOMSG...........
0x0FFFFFFFFFFF9C50 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9C60 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9C70 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9C80 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9C90 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9CA0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9CB0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9CC0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9CD0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9CE0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9CF0 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9D00 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
0x0FFFFFFFFFFF9D10 : 0000 0000 0000 0000 0000 0000 0000 0000 ................
2009-12-14-20.15.25.077684-330 E28358A856 LEVEL: Warning
PID : 602312 TID : 1 PROC : db2star2
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, license manager, sqllcRequestAccess, probe:1
MESSAGE : ADM12007E There are "89" day(s) left in the evaluation period for
the product "DB2 Enterprise Server Edition". For evaluation license
terms and conditions, refer to the IBM License Acceptance and License
Information document located in the license directory in the
installation path of this product. If you have licensed this product,
ensure the license key is properly registered. You can register the
license via the License Center or db2licm command line utility. The
license file can be obtained from your licensed product CD.
2009-12-14-20.15.25.174108-330 E29215A384 LEVEL: Warning
PID : 667782 TID : 1 PROC : db2wdog 0
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, routine_infrastructure, sqlerInitFmpTable, probe:30
DATA #1 : String, 16 bytes
agentCachingFmp:
DATA #2 : String, 3 bytes
OFF
DATA #3 : String, 5 bytes
Flag:
DATA #4 : Boolean, 1 bytes
false
2009-12-14-20.15.26.288917-330 E29600A1208 LEVEL: Event
PID : 602312 TID : 1 PROC : db2star2
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, base sys utilities, DB2StartMain, probe:911
MESSAGE : ADM7513W Database manager has started.
START : DB2 DBM
DATA #1 : Build Level, 152 bytes
Instance "db2ged" uses "64" bits and DB2 code release "SQL09017"
with level identifier "02080107".
Informational tokens are "DB2 v9.1.0.7", "s090308", "U823509", Fix Pack "7".
DATA #2 : System Info, 224 bytes
System: AIX gpldeve1 1 6 00C1EF854C00
CPU: total:8 online:4 Threading degree per core:2
Physical Memory(MB): total:14336 free:10662
Virtual Memory(MB): total:35328 free:31640
Swap Memory(MB): total:20992 free:20978
Kernel Params: msgMaxMessageSize:4194304 msgMaxQueueSize:4194304
shmMax:68719476736 shmMin:1 shmIDs:131072
shmSegments:68719476736 semIDs:131072 semNumPerID:65535
semOps:1024 semMaxVal:32767 semAdjustOnExit:16384
Cur data size (bytes) = 0x7FFFFFFFFFFFFFFF
Cur stack size (bytes) = 0x7FFFFFFFFFFFFFFF
Cur core size (bytes) = 0x0000000077359400
nofiles (descriptors) = 0x7FFFFFFFFFFFFFFF
2009-12-14-20.18.03.426764-330 E30809A597 LEVEL: Warning (OS)
PID : 544840 TID : 1 PROC : db2set
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, oper system services, sqloqcurdir, probe:100
MESSAGE : ZRC=0x840F0001=-2079391743=SQLO_ACCD "Access Denied"
DIA8701C Access denied for resource "", operating system return code
was "".
CALLED : OS, -, unspecified_system_function
OSERR : EACCES (13) "Permission denied"
DATA #1 : File name, 0 bytes
Object not dumped: Address: 0x0FFFFFFFFFFFE688 Size: 0 Reason: Zero-length data
2009-12-14-20.18.03.429260-330 I31407A290 LEVEL: Event
PID : 544840 TID : 1 PROC : db2set
INSTANCE: db2ged NODE : 000
FUNCTION: DB2 UDB, oper system services, db2set_main, probe:40
CHANGE : CFG DB2SET: DB2_WORKLOAD: From: "SAP" To: "SAP"
Thanks
Sunny -
EHP4 SPS05 installation on ERP 6.0
Hi,
We are about to start with the EHP4 SPS05 installation on ERP 6.0 quality system which has a CENTRAL and two dialogue instances.
Please can anyone confirm do we need to uninstall dialogue instances after we upgrade the central instances??
As per the document, before dowtime phase starts we need to uninstall the dialog instances and isolate the central instances.
Can i keep my dialogue instances till DOWNTIME phase? Do I need to upgrade dialog instances seperately?
Please can anyone guide me through the exact procedure as to what needs to be followed?
Thanks & regards,
RozalHello Rozal,
You donot need to uninstall and install the dialog instance again.You only need to stop dialog instance before downtime and restart it after the downtime. Check the following stages from EHP4 installation guide :
Actions During the Preprocessing Roadmap Step
=============================================
13. Before the downtime [page 72] begins, you stop all dialog instances, stop SAP Management
Console (MMC) and Software Deployment Manager (SDM), stop jcmon and other standalone
monitoring tools, and, if you are running an enhancement package installation in a high
availability system, you stop the Java central instance and SCS instance.
Actions During the Downtime Roadmap Step
=======================================
5. The installation program asks you to perform the following actions:
n You back up the database.
n You change the database recovery mode.
n You start the dialog instances.
Preparation of SAP System for Downtime (Phase DOWNCONF*)
========================================================
You are requested in phase DOWNCONF_TRANS at the end of step Preprocessing to perform actions that
prepare your SAP system for the downtime.
Perform the following actions:
1. Make sure that all production work in the SAP system is stopped and no users are logged on to
the SAP system.
2. Make sure that all dialog instances are shut down. <<<===============
3. Isolate the central instance.
For more information, see Isolating the Central Instance in the document Troubleshooting and Administration
5.10 Performing Actions Before Phase BEGIN_DOWNTIME
===================================================
The downtime starts when the installation of the ABAP part has reached the DOWNCONF_TRANS phase.
Procedure
Before the downtime begins, perform the following actions:
1. Stop all dialog instances. <<<===============
- Niraj -
Installation EHP (1+2+3) 4 and Installation NW EHP1
Hello,
We have to install all EHP (1-4) for our ERP 6.0 (SPS9), and as well the EHP 1 for NW.
We have all DVDs available (EHP4 READY, etc.)
Have I install first the EHP 3 via SPAM/SAINT, and then the EHP4 with the EHPi ?
Or can I start the installation with the DVD "EHP4 / EHP1NW Upgrade Master" ? If yes, how? There are just archives..
Regards,Dear Rainer,
the "EHP4 ready" DVD is for new customers (basically this is an up-to-date "ECC Server 6.0" without any EHP4 application components).
As you have an existing ECC system you have to use the Maintenance Optimizer (SolMan 7.0 EHP1) to download the EHP and Support packages and generate the stack XML (which the EHP Installer requires).
It makes no sense to install EHP3 (or any SP's first) - you will just double the effort. Hence SAP recommends to install EHP4 (with the EHP Installer) in one step.
Note that there is only one technical exception: 32 Bit platforms, please refer to the Master Guide for more information.
A good starting point to understand the overall concept is the Must Know Guide:
http://service.sap.com/~sapidb/011000358700001166742007E
To learn more about the step-by-step the E2E EHP4 installation procedure I can recommend the How-To-Install EHP4 guide:
http://service.sap.com/~sapidb/011000358700000293582009E.PDF
Best regards,
Christian. -
Windows server edition/version supports installation of ERP 6.0
Hi ,
I am trying to install Solution manager 7.0 ,ERP 6.0. on windows OS.
and Oracle database.
My OS : Microsoft windows XP Proffessional version 5.1 service pack 3 (32 bit)
RAM Size : 2 GB
Could anyone give me the hardware and software requirements for installations of solution manager 7.0 and ERP 6.0. on windows.
which windows server edition/version supports installation of SOL MAN 7.0 and ERP 6.0 ?
thanks.> Does Microsoft windows2008 server edition / windows 7/vista supports installation of ERP 6.0 .
Did you have a look at the PAM as suggest at http://service.sap.com/pam?
Vista/Windows 7 are client operating systems and are not supported for ERP 6.0 or Solution Manager or any other backend.
Markus -
BO4 Installation on AIX with DB2
Hello,
I hope this is the correct forum in which to pose such a question.
We are currently planning an installation of BO4 on AIX and our standard choice of database platform is DB2 UDB V9.7. I have analysed the numerous SAP planning and installation guides for BO4 but am unclear as to what file systems the installation will demand for the DB2 system. For a traditional SAP AS ABAP/Java installation we would be creating /db2/<SID>/sapdata1-4 but there appears to be no such requirement in BO4.
Is there anyone out there who has performed this kind of installation or who has any useful information? Any help would be appreciated.
Thanks,
GaryHello,
just create a simple Schema in the Tablespace on any DB2 Database in your organisation you wish. Grant the user full access right to only this schema and your done. Prior for installing BI4 install the DB2 Client on the AIX Host where BI4 gets installed and configure it to access the newly created schema.
Also check SAP Note - 1384629
Regards
-Seb. -
EWM Installation on ERP as an add on
Dear All,
We are planning for EWM Installation or ERP EHP7 as an Add-on. I have few queries..?
1. Can I directly download the EWM Components and install it without xml via saint?
2. what components do I need to install for EWM ?
3. If the installation need to be via xml can i see the ewm add on components in mopz..?
I have followed the note 0001892669 but I am bit confused..regarding ewm installation as an add on.kindly help.
Thanks..
Regards,
Letz..Hello,
you can go through the link: Re: EWM add on vs EWM Standalone
I believe, the posting was yours' only.
Regards,
Sathish -
ERP 6 NW 7.0 upgrade to NW 7.01(NW EHP1) + ERP EHP4
is here anyone who has successfully upgraded/updated ERP 6 NW 7.0 with NW EH1 + ERP EHP4 (as sap suggests in guide. I really need only NW EHP1)? There are a lot of questions about this process and sap-EHPI and how to do it, and I need this info from someone who has done this, not some links to notes which i red already some 10 times or pdf guides. I have pretty simple questions and I need direct instructions.
server is ABAP+JAVA with portal.
any help appreciatedHi
You must apply Netweaver EHP1 for EHP4 ERP, this is a recommendation of sap that you have a lastest patchs and kernel. If not you system could have inconsistenses.
Now, I update my ERP 6.0 to EHP4 with EHP1 for SAP Netweaver.
regards
William Neira -
SAP R/3 ERP 6.0, BI and BO on Sigle Sign On
Hi Experts,
We have implemented SAP R/3 ERP 6.0, BI and BO with Crystal Reports.
Is it possiable configure Single Sign On for the above servers with sigle point of login.
Using NWBC we can connect single inteerface but is it possiable with SSO.
Our SAP user must be able to access crystal reports from SAP menu, SAP user NEED NOT to enter another user ID and pwd while accessing Crystal report. His one time SAP login should be enough to use SAP programs as well as crystal reports
Similarly, if a user is defined in SAP BI, he will be using same user ID , Pwd to access BO-Web-I reports
Please suggest me on this.
Regards,
Sandeep KHi Sandeep,
You can import SAP roles and users in to BOE and then enable single sign. There are different options available to achieve this. Please refer to below links. That will give you some idea.
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupXI3.1WebIntelligenceSSOwithSAPBW
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtoprepareBOEXI3.1environmentforSNCandgeneratePSE
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/9030bb59-079d-2b10-f8b9-967403481481
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/403cdf46-c63e-2b10-2997-978cb8ba59f0
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/3097fb98-c63e-2b10-e7b8-fb7253566373
Hope this helps.
Regards,
Sanjay -
Lenovo IdeaCentre A720 - Clean Installation Windows 8.1 Pro x64 and Office 2013 x64
GUIDE: Clean Installation Windows 8.1 Pro x64 and Office 2013 x64
Note: for a good performance is recommended to use a SSD for Windows with a minimal of 128GB and use the HDD for Data
Driver up to date - Sep 2014
First you need to download and have ready the following softwares:
Classic Shell V4.1: To get back the Start Button like Windows 7
http://www.fosshub.com/Classic-Shell.html/ClassicShellSetup_4_1_0.exe
Broadcom BT for Windows 7 (64-bit) - to enable dongle, Windows 7 Live DVD and USB Drive.
http://download.lenovo.com/consumer/desktop/h1100174.exe
Realtek Cardreader Driver Windows 8.1 (64-bit) V6.2.9200.29070. To be able to use the card reader
http://download.lenovo.com/consumer/desktop/h1101061.exe
NV VGA Driver for Windows 8.1 (64-bit) V340.52. Latest video driver for NVIDIA video cards
http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/340.52/340.52-n...
Lenovo Silver Silk Keyboard Driver for Windows 8.1 (64-bit) V1.05. To be able to see when Caps Lock or Number Lock is press
http://download.lenovo.com/consumer/desktop/h1100842.exe
Yuan MC907 TV Tuner Driver for Microsoft Windows 7 (64-bit) V6.14.10.416. To be able to use the Yuan TV card
http://download.lenovo.com/consumer/mobiles/tvt129w8164.exe
OSD APP for Windows 8.1 (64-bit) V1.1.06. To be able to use UP or Down Volume for Touch keys in the screen.
http://download.lenovo.com/consumer/desktop/h1100547.exe
Windows 8.1 x64 Installation DVD and Office 2013 x64
Follow this procedure for the installation:
Install Windows 8.1 Pro x64 using the general or personal key
Just to avoid install an old Video Driver from windows update, disable the Wi-Fi or Interned connection
Install Office 2013 x64
Install the Video Driver “340.52-notebook-win8-win7-64bit-international-whql.exe” just let the setup to uncompress the files in “C:\NVIDIA” folder, do not continue to avoid the installation of other software that you may never use. Go to “Device Manager” and Right click properties in the display adapter, press “Driver” - “Update Driver” select browse my computer and give the path “C:\NVIDIA” press next and close after installation finish
Enable Wi-Fi and open Control Panel – Programs – Turn Windows features on or off and select “.NET Framework 3.5” hit OK, after the installation finish, reboot PC
Install “ClassicShellSetup_4_1_0.exe” follow instruction and configure the way you may like
Run file “h1101061.exe”, unselect “Install Realtek Card Reader Driver” and press finish. Path for driver is "C:\EXEBuild\Realtek Card Reader Driver”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\EXEBuild\Realtek Card Reader Driver” press next and close after installation finish
Install “h1100842.exe” backup driver location is “C:\EXEBuild\Lenovo Silver Silk Keyboard Driver” after installation is done, go to “C:\Program Files (x86)\Lenovo\Lenovo Silver Silk Wireless Keyboard” and Right Click in the file ‘”skd8861.exe” properties – compatibility – change setting for all users and select run compatibility mode for “Windows 7” press OK and OK
Run “tvt129w8164.exe” unselect “Install TV Tuner” and press finish. Path for driver is “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)” press next and close after installation finish
Run “h1100547.exe” unselect “Install A7 OSD APP now” and press finish. Path for driver is “D:\EXEBuild\A7 OSD APP”. Run the file “setup.exe” do not reboot the PC and ensure the folder been created during the installation “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll”, if this fail go to next step, if not, avoid next step. Normally a successful installation of this file depend of “.NET framework 3.5”
Go to control panel and uninstall “Lenovo OSD”, run the previous “setup.exe” and during the process of the installation, be ready to make a copy for the temporal file name “setup.msi” created in “C:\Users\YOURUSERNAME\AppData\Local\Temp”, copy file “setup.msi” in “C:\” and run CMD in administrator mode and go to “C:\” using “CD \ + ENTER”, now use the following command “C:\msiexec.exe /a c:\setup.msi + Enter” the folder “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll” will be created
Create a shortcut “BrgVolOSD” and copy this in the startup folder “C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp”
Update Bluetooth driver using windows update if Windows detect the dongle, if not go to next step
If Bluetooth is not detected, mean that the actual hardware somehow is disabled. In order to enable, boot the PC with a Windows 7 live DVD with the USB drive installed in the PC. After PC been running with Windows 7 live, Install the file “h1100174.exe” previously copy in the USB drive. Use the USB drive also as installation path for the Bluetooth software, when the installation is done, look in the folder “X:\Program Files\Lenovo\Bluetooth Software” and run the file name “BTTray.exe”, press right click in the Red Bluetooth icon on the taskbar to enabled the Bluetooth dongle. Reboot PC in Windows 8.1 without any DVD media inside, this time Windows 8.1 will be able to recognize the Bluetooth and install the respective drivers.
Another way, install the latest release from Broadcom BTW_12.0.0.9820 from the following link:
BTW_12.0.0.9820.zip
directly in Windows 8.1. Remember if the software is uninstall the Bluetooth will be disabled and
Windows will not be able to see the device in the “Device Manager”
Last step, use your own Windows 8.1 Pro Key and Office 2013 key to register and activated your legal copy of the Microsoft software’s.
Final, enjoy.
This guide was creates for me to help peoples like me in this community.bump
-
Installation of SAP Business One client and required administration rights
Dear community,
I would like to kindly ask you for your feedback on the installation of SAP Business One client and its patches on end-user computers.
The pain points I have heard so far are the following:
- The installation of SAP Business One client and its patches has to be started by a user with administrator rights. As far as I know (and please correct me if I am wrong), this is also required in case of installation of any other software.
- End users usually do not have administrator rights and therefore the SAP Business One clients have to be manually upgraded by administrator. This is time consuming (and therefore costly) activity.
We are considering to design a new solution which would overcome the above limitations.
I would like to confirm with you if my understanding is correct:
Question 1:
Is it a common situation that the end-users of SAP Business One client do not have administrator rights and therefore cannot install the patches of SAP Business One client by themselves?
If yes, how do you resolve this currently?
Question 2:
Do you use Microsoft System Center Configuration Manager or Active Directory (or any other 3rd party solution) to automatically distribute software packages and updates to client PCs at your customers?
Question 3:
If the SAP Business One client installation (and its patches) is delivered as MSI package with silent installation capability, would you be able to automate the deployment of B1 client updates to client PC using the abovementioned technologies? Or can you still see some obstacles?
Thank you
Best regards
Jan Ruzarovsky
SAP Business One Product ManagementDear all,
Thank you very much for your comments, very helpful!
@Marco - SAP Business One 8.8 client currently does not support the silent installation / upgrade. However we are currently considering this requirement and we would like to deliver it as soon as possible.
We are currently considering several possible designs. One of them is as follows:
1. A new SAP Business One Updater Service will be installed on each client workstation.
It will be a windows service installed and running under a local system account.
2. The updater service will check regularly if there are any new patches of SAP Business One client or add-ons uploaded to a configured shared directory.
3. If a new patch is found in the shared directory, the updater service will SILENTLY install the new patch (add-ons, SAP Business One) on the client workstation.
The service would be able to install patches even if nobody is logged in.
Questions:
If we consider the above design, there are a few open topics:
1. During the upgrade of the SAP Business One server, the client patches (and SAP add-on patches, partner add-ons) would be placed to a SHARED directory instead of into SBO-Common (as it is implemented currently).
- Does this have any impact on your tools, processes or add-ons?
2. SAP Business One upgrade wizard will put the latest patch of SAP Business One client into a configured shared directory. The shared directory will have to be read-only for everybody in the network to avoid that the valid installation files are replaced by malware or virus infected files
- Can you configure such a shared directory?
From customer perspective, if a new patch is put into the shared directory, the updater service can behave as follows:
1. Manually initiated upgrade of the client
Example: Customer starts the old (not upgraded) SAP Business One client. The client will inform him/her that a new patch has been found and it has to be installed in order to continue working with the client. After customer clicks "Yes", the upgrader service starts the silent installation of the client and informs customer about the progress. Once the upgrade is finished, the upgraded SAP Business One client will be started automatically.
2. Automatic update:
- Update the client automatically (e.g. overnight) if customer is not working with SAP Business One
- If SAP Business One client is running, ask customer if he/she wishes to upgrade the client now or to delay the upgrade by X minutes.
Question: Which of the above two scenarios would you and your customers prefer?
If the upgrade is fully silent, automated and handled by the upgrader service, Is it acceptable for customers to trigger the installation manually and wait till the client is upgraded? Or would they prefer to have the client updated for them e.g. overnight so they can immediately start to work?
Best regards
Jan
Edited by: Jan Ruzarovsky on Sep 29, 2010 9:37 AM -
I'm installing the newest version of Itunes over the last version on my laptop. win 7 pro os. it starts the install then a error msg comes up stating that Bonjour service failed to start. verify that i have sufficient priveleges to start system services. I can't retry, ignore only cancel which un-installs all that it has installed and reverts me to the last version which i had. any idea?
it starts the install then a error msg comes up stating that Bonjour service failed to start. verify that i have sufficient priveleges to start system services.
Sometimes we can get past that one by disabling the Bonjour Service prior to the install.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Perhaps maximise the screen to better see what's going on.)
Right-click the Bonjour Service and select "Properties".
In the General tab, set the Startup type to "Disabled":
... and click OK.
Restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
How do you see what bitrate your music is on the latest iTunes?
How do you see what bitrate your music is on the latest iTunes?
-
Is it possible to move app's right to left to another screen?
I accidentally moved an app to another screen; left to right; but when I tried to move it back I couldn't reverse the process. Is it possible to move an app from screen to screen right to left?
-
All programs work except LR It's asks for reactivation of subscription
Only Libray module works rest of the modules is deactivated. been in contact with support but they couldn't help me and ask me to com back today and ask for a product technician. But for some reason the chat is closed
-
Bug report - apex.confirm
Apex 4.0.2 See http://apex.oracle.com/pls/apex/f?p=24317:79 Both regions have a button that submits the page with the following URL javascript:apex.confirm('Are you sure?',{request:'FOO',showWait:true});The one at the top of the page works fine. But
-
How to separate left and right channel in audiotracks
I would like to adjust audio tracks left and right channels separetly from each other. Now the volume levels are linked together. Is there a way to separate them? Other question is ; for some reason the pan slider in viewer does not seem to have left