HA state progression failed

Hi
I have a pair of firewall 5520 which is running 8.2(5) image.
Recently I am facing the "HA state progression failed" failover issue in the secondary unit which forces the secondary unit to failover disabled stage.
Any body have idea why it is happening.
Both firewalls are directly connected. for the troubleshooting purposed I had changed the failover cable and other cables of secondary unit as well. this incident happened three times in last two three week. i had not done any changes regarding the failover concern.
some outputs Running config
interface Management0/0
description LAN Failover Interface
failover lan unit secondary
failover lan interface lan_fail Management0/0
failover key *****
failover interface ip lan_fail 1.1.1.1 255.255.255.252 standby 1.1.1.2
------------------ show failover ------------------
Failover Off (pseudo-Standby)
Failover unit Secondary
Failover LAN Interface: lan_fail Management0/0 (up)
Unit Poll frequency 1 seconds, holdtime 15 seconds
Interface Poll frequency 5 seconds, holdtime 25 seconds
Interface Policy 1
Monitored Interfaces 3 of 160 maximum
------------------ show failover history ------------------
==========================================================================
From State                 To State                   Reason
==========================================================================
02:16:25
Not Detected               Negotiation                No Error
02:16:45
Negotiation                Cold Standby               Detected an Active mate
02:17:00
Cold Standby               Disabled                   HA state progression failed
==========================================================================
show failover state
               State          Last Failure Reason      Date/Time
This host -   Secondary
               Disabled       None
Other host -   Primary
               Not Detected   None
====Configuration State===
====Communication State===

Dear Prashant
I want to apply license to increase security context in FWSM which is running in Active-Active mode on VSS Core switches
As per below document, first we need to disable failover by entering 'no failover' command on active FWSM and then apply the license seperately on both FWSM.
I just want to know when i will disable the failover then standby move to pseudo-standby state.
Will there be any services impact which are running behind the FWSM when disbaling the failover and then re-enabling the failover.
http://www.cisco.com/c/en/us/td/docs/security/fwsm/fwsm40/configuration/guide/fwsm_cfg/swcnfg_f.html#wp1073226
Appreciate your response.

Similar Messages

Sql insert statement will fail if the data value has empty line

Hi,
I notice if the insert statement in my .sql file contains data that has new line (enter key), the insert will fail.
For example:
insert into mytable (message)
values ('this is the first line
this is the second line that will cause insert statement to fail
so as this third line');
commit;
How to overcome this?
Please advise.
Thank you.
Message was edited by:
bchurn
Message was edited by:
bchurn

It did not return me any error. What is the error you are receiving ??
SQL> create table mytable (message varchar2(500));
Table created.
SQL> insert into mytable (message)
2 values ('this is the first line
3 this is the second line that will cause insert statement to fail
4 so as this third line');
1 row created.
SQL> @c:\test.txt
1 row created.contents of c:\test.txt
<<
insert into mytable (message)
values ('this is the first line
this is the second line that will cause insert statement to fail
so as this third line');
>>

UPDATE STATEMENT GETTING FAILED

Hi
Can you specify me condition in which case update statement will fail and exception will be handled
I wanted to know that
Lets says I have a procedure
procedure p1 is
begin
update emp set deptno=50;
end;
can you suggest me when will update statement fail and an exception will be raised?
Appreciate your help on the above?
Thanks & Regards
Thakur Manoj R
Edited by: user1014019 on Feb 9, 2011 5:38 AM

Standard Exceptions, from the the STANDARD package
DUP_VAL_ON_INDEX      ORA-00001      You attempted to create a duplicate value in a field restricted by a unique index.
TIMEOUT_ON_RESOURCE      ORA-00051      A resource timed out, took too long.
TRANSACTION_BACKED_OUT      ORA-00061      The remote portion of a transaction has rolled back.
INVALID_CURSOR      ORA-01001      The cursor does not yet exist. The cursor must be OPENed before any FETCH cursor or CLOSE cursor operation.
NOT_LOGGED_ON      ORA-01012      You are not logged on.
LOGIN_DENIED      ORA-01017      Invalid username/password.
NO_DATA_FOUND      ORA-01403      No data was returned
TOO_MANY_ROWS      ORA-01422      You tried to execute a SELECT INTO statement and more than one row was returned.
ZERO_DIVIDE      ORA-01476      Divide by zero error.
INVALID_NUMBER      ORA-01722      Converting a string to a number was unsuccessful.
STORAGE_ERROR      ORA-06500      Out of memory.
PROGRAM_ERROR      ORA-06501      Generic "Contact Oracle support" message.
VALUE_ERROR      ORA-06502      You tried to perform an operation and there was a error on a conversion, truncation, or invalid constraining of numeric or character data.
ROWTYPE_MISMATCH      ORA-06504
CURSOR_ALREADY_OPEN      ORA-06511      The cursor is already open.
ACCESS_INTO_NULL      ORA-06530
COLLECTION_IS_NULL      ORA-06531

System State Backup fail. Writer name: 'NTDS' : State: [11] Failed : Last error: Non-retryable error

Hello!!! Everybody,
I have Win Server 2008 R2 contain Domain controller (No Hyper-V). I have to take "SYSTEM STATE DATA BACKUP". I have ran following command on this Server.
c:\>wbadmin start systemstatebackup -backuptarget:d:
but backup was not successful & I got following error in command prompt.
" A VOLUME SHADOW COPY SERVICE OPERATION HAS OCCURRED : <0X800423f4>. THE WRITER EXPERIENCED A NON-TRANSIENT ERROR. IF THE BACKUP PROCESS IS RETRIED,THE ERROR IS LIKELY TO REOCCUR."
I also ran following command to know exact problem.
c:\>vssadmin list writers
I got following error
Writer name: 'NTDS'
   Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
   Writer Instance Id: {21c57902-5037-467b-b9a3-72ed41c9723e}
   State: [11] Failed
   Last error: Non-retryable error
I also checked Event Viewer & got following 3 noserror.
(1) Event ID : 8229, Source : VSS
A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error. If the backup process is retried, the error is likely reoccur.
Process ID : 608
(2) Event Id : 412, Source : ESENT. Task Category: Logging/Recovery
lsass (636) Unable to read the header of log file "\\?\Globalroot\device\harddiskvolumeshadowcopy2\Windows\NTDS\edb.log".Error:546
(3)Event Id : 521 Source : Backup
The backup operation that started at '‎2014-‎05-‎13T01:44:31.444000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348129'. Please review
the event details for a solution, and then rerun the backup operation once the issue is resolved.
I have also restart the server but problem is not resolved. I have no SQL in my Server.
I also re-register the VSS components with the help of following website.
Website Link : https://kb.acronis.com/content/45776
You are requested please solve my problem on very urgent basis.

You can refer below link for your issue
http://waynestorey.com/blog/2012/01/18/windows-backup-fails-with-event-id-521-error-code-2155348129/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

SPLWEB state is failed in Weblogic Server Admin console 10.3.3

Hi
I am facing some issues in Weblogic Server 10.3.3 Administrator console for development purpose:
In deployment category, There will be 1.Splwebservice and 2.Splweb. Splweb state is failed and i am not able to open the ouaf. Under SPLWEB Category, there are other links namely ouaf, ouaf/appviewer, ouaf/help, ouaf/XAIapp. So these links should have a expanded (+) button to connect other links also.
Can anyone tell me how to bring the ouaf and appviewer UP?
what can be the solution for this issue?
Pl reply me ASAP.

Ideally, you want your application artifact to specify a single datasource that doesn't specify an environment name. Your WebLogic instance is defined to reside within a specific environment, like DEV, QA, or PROD. The environment variability should be in WebLogic, not your application.
In other words, you should be defining a single datasource in your application, and a single datasource in WebLogic. What that datasource points to in WebLogic depends on what environment that WebLogic instance resides in. If it's a development instance, the datasource will point to the DEV database. If QA, it will point to the QA database, and if PROD, it will point to the PROD database.

Windows 2012 System State Backup Fails

We have a Windows 2012 Domain Controller VM that we would like to backup the System State using DPM. Agent has been installed and the Windows Backup has been added.
When the backup runs in DPM, the job fails. Here is the error code:
DPM cannot create a backup because Windows Server Backup (WSB) on the protected computer encountered an error (WSB Event ID: 517, WSB Error Code: 0x12363C0). (ID 30229 Details: Internal error code: 0x80990ED0)
When we try and create the backup using Windows Backup, the following error is in the log file:
following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
We have tried attaching a separate drive and backup to a shared location. Both fail.
We have tried backup of just a few files on the DC instead of the System State, this fails as well.
All VSS Writers show as Stable with no errors
Server has the latest updates
Server has been rebooted, same issue
VM is Windows 2012 on a Windows 2008 R2 clustered host and is using Dynamic Disks (not fixed disks).
Anyone have any thoughts on what could be going on?

Hi,
If any of the following are true, you will not be able to backup a system state to that volume.
• Make sure that the target volume has no shadow copy before the backup starts.
• If a system state backup is stored on a source volume, backup settings should be configured for full backups. By default, settings are configured for full backups.
• Periodically check that no other user or program maintains a shadow copy on the target volume.
• Do not keep volume level backups and system state backups in the same location.
• The volume used to store the system state backup needs twice the amount of free space as the size of the system state backup until the backup completes
Meanwhile please check if it is caused that you are backing up to a critical drive. Try modify the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wbengine\SystemStateBackup\
Set the value of this entry as follows:
Name: AllowSSBToAnyVolume
Data type: DWORD
Value data: 1
If you have any feedback on our support, please send to [email protected]

ADF Mobile: Client state access failed to establish a place for storage

Hi,
I hope it's fine to ask about adf mobile in this discussion room.
following problem:
While switching from two views/pages, both display a list, an error was thrown with the message: "Client state access failed establish a place for storage: null".
From the list view, I can navigate to see the details of the list-element. This error message wasn't shown up if I navigate from the details back to the list overview.
The application is developed using jdeveloper 11.1.2.4 and deployed on iPhone simulator 6.1 (xcode version 4.6.3).
There is no further information about this error in the log file. I'm not really sure if this message is really coming from the framework itself.
Has anyone probably ever heard about this message? It'll really helpful.
Thanks!

Hi.
I got this error message once. I was trying to copy the full selected row for a table in the view scope using a setPropertyListener. Something like this:
<amx:setPropertyListener from="#{row}" to="#{viewScope.visit}" type="swipeRight"/>
This will not work. The workaround is not to be lazy and simply copy the row attributes you need one by one.
Best Regards,
Frédéric Desbiens
ADF Product Manager
Twitter: @BlueberryCoder
blog: http://blogs.oracle.com/blueberry

HT4157 I am trying to use my cellular data on iPad and states connection failed. What do I need to do?

I am trying to use cellular data and states connection failed. What do I need to do to fix this?
Thanks

Hi there April3939,
You may find the troubleshooting steps in the article below helpful.
iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection
http://support.apple.com/kb/TS4249
-Griff W.

Up Date stat is failing

Dear All
DB Update stat is failing please help
BR0280I BRCONNECT time stamp: 2011-11-12 23.46.15
BR0884I Statistics collected for table: SAPDAT./BIC/0CZE_Q04, rows old/new: -1/13
BR0280I BRCONNECT time stamp: 2011-11-12 23.46.15
BR0881I Collecting statistics for table SAPDAT./BIC/B0000002000 with method/sample E/P.300 ...
BR0280I BRCONNECT time stamp: 2011-11-13 01.34.04
BR0301E SQL error -3113 at location stats_tab_collect-20, SQL statement:
'BEGIN DBMS_STATS.GATHER_TABLE_STATS (OWNNAME => '"SAPDAT"', TABNAME => '"/BIC/B0000002000"', ESTIMATE_PERCENT => 0.300, METHOD_
ORA-03113: end-of-file on communication channel
BR0280I BRCONNECT time stamp: 2011-11-13 01.34.04
BR0261E BRCONNECT cancelled by signal 13
BR0280I BRCONNECT time stamp: 2011-11-13 01.34.04
BR0301E SQL error -1092 at location db_connect-2,SQL statement:
'CONNECT /'
ORA-01092: ORACLE instance terminated. Disconnection forced
BR0310E Connect to database instance EBP failed
BR0806I End of BRCONNECT processing: cehfacda.sta2011-11-13 01.34.04
BR0280I BRCONNECT time stamp: 2011-11-13 01.34.04
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 5
Thanks
Reddy

Hi,
My system is already on 10.2.0.4.0 and in sm21 i could find this log
Documentation for system log message BY 2 :
After the attempt to call a database operation, the database system has
returned the error code specified in the message, which indicates that
the operation concerned could not be executed successfully.
61446 354420 h Database Error (Non-SQL) BY 2 3113 FET dbds 596
Thanks
Reddy

User State Restore Fails with Error 0x8007000E

I am having some trouble restoring user states with usmt. I am running a side by side migration, for which I have already added the computer association prior to running the capture. The task sequence I am using is a very simple and only has
the following steps: Request State Store, Restore User State, and Release state store.
I am aware that the error code is linked to task sequence environment running out of space, and that it may have something to do with software updates. However, we are not currently deploying any software updates from SCCM. We do have an upstream WSUS
server that is supplying updates directly to clients. Would this still be an issue? I find it hard to believe that an OS deployment sequence runs just fine, but a very simple state restore errors out. Any thoughts?
Thanks,
Kyle

It looks like I'm getting two errors during the restore. First is that the COMPUTERNAME\unknown account is chosen for migration, but the target does not have account NEWCOMPUTERNAME\unkown. Directly after that is Failed.[gle=0x00000006]. Then
I get unable to create a local account because \lac was not specified and USMT error code 14. Below are the logs:
2015-03-12 11:23:51, Info [0x000000] LOADSTATE.EXE Version 6.3.9600.17237[gle=0x000000b7]
2015-03-12 11:23:51, Info [0x000000] USMT Started at 2015/03/12:11:23:51.094
2015-03-12 11:23:51, Info [0x000000] Command line: C:\_SMSTaskSequence\Packages\AHQ0000A\amd64\loadstate.exe \\ABBTECHCM01.ABBTECH.US\SMPSTOREd_FD7B8EBE$\ED83F415E21062DB9B2A8177AA933D6234B16FE457A8D193A0632650FCC769FB /decrypt /keyfile:****
/c /l:C:\Windows\CCM\Logs\SMSTSLog\loadstate.log /progress:C:\Windows\CCM\Logs\SMSTSLog\loadstateprogress.log /i:C:\_SMSTaskSequence\Packages\AHQ0000A\amd64\migdocs.xml /i:C:\_SMSTaskSequence\Packages\AHQ0000A\amd64\migapp.xml
2015-03-12 11:23:51, Info [0x000000] Script file specified: C:\_SMSTaskSequence\Packages\AHQ0000A\amd64\migdocs.xml[gle=0x000000cb]
2015-03-12 11:23:51, Info [0x000000] Script file specified: C:\_SMSTaskSequence\Packages\AHQ0000A\amd64\migapp.xml[gle=0x000000cb]
2015-03-12 11:23:51, Info [0x000000] Starting the migration process[gle=0x00000006]
2015-03-12 11:24:01, Info [0x000000] System information:
2015-03-12 11:24:01, Info [0x000000] Processing the settings store[gle=0x00000006]
2015-03-12 11:24:14, Info [0x000000] Selecting migration units
[gle=0x00000006]
2015-03-12 11:24:14, Error [0x000000] The account COMPUTERNAME\uknown is chosen for migration, but the target does not have account NEWCOMPUTERNAME\uknown. See documentation on /lac, /lae, /ui,
/ue and /uel options.
2015-03-12 11:24:14, Info [0x000000] Failed.[gle=0x00000006]
2015-03-12 11:24:14, Info [0x000000] Unable to create a local account because /lac was not specified[gle=0x00000006]
2015-03-12 11:24:14, Info [0x000000] USMT Completed at 2015/03/12:11:24:14.843[gle=0x00000057]
2015-03-12 11:24:15, Info [0x000000] ----------------------------------- USMT ERROR SUMMARY -----------------------------------
2015-03-12 11:24:15, Info [0x000000] * USMT error code 14:
2015-03-12 11:24:15, Info [0x000000] +-----------------------------------------------------------------------------------------
2015-03-12 11:24:15, Info [0x000000] | Unable to create a local account because /lac was not specified
I tried enabling the restore local accounts box, but that didn't work. Also the sequence runs just fine on a different model machine.

Windows 2008 R2 state backup fails with various errors

Since a few years we are using DPM to backup our servers but since some time the system state of the server where DPM is installed started to fail.
I was trying to do system state backup using command line windows backup:
wbadmin start systemstatebackup -backupTarget:C:
and it fails every time with different error (last 5 tries):
1. Error in backup of C:\Windows\winsxs\Manifests\x86_microsoft-windows-w..pdateclient-activex_31bf3856ad364e35_7.6.7600.256_none_09f272fb52ab0c3f.manifest during read: Error [0x80070002] The system cannot find the file specified.
2. Error in backup of C:\Windows\System32\msmpeg2vdec.dll during write: Error [0x80070002] The system cannot find the file specified.
3. Error in backup of C:\Windows\System32\catroot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\Microsoft-Windows-WinMan-WinIP-Package-TopLevel~31bf3856ad364e35~amd64~~7.1.7601.16398.cat during read: Error [0x80070015] The device is not ready.
4. Error in backup of C:\ during read: Error [0x80070005] Access is denied.
5. Error in backup of C:\Windows\System32\ActionCenter.dll during write: Error [0x80070002] The system cannot find the file specified.
That's a Windows 2008 R2 server with DPM and OM servers installed.
The system state backup was doing fine for 2 or 3 years and suddenly it just stopped.:/

Hi,
It seems that we cannot use a volume that is included in the backup as a storage location, please backup to another volume to see the result.
You could refer to the article below to troubleshoot the issue:
Reasons why the error Enumeration of the files failed may occur during System State backup
http://blogs.technet.com/b/askcore/archive/2010/06/18/reasons-why-the-error-enumeration-of-the-files-failed-may-occur-during-system-state-backup.aspx
In additional, as the server with DPM installed, I suggest you also ask for help from DPM forums:
http://social.technet.microsoft.com/Forums/en-US/home?forum=dataprotectionmanager&filter=alltypes&sort=lastpostdesc
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Why this select statement is failing

Hi to all experts.
Im not able to understand why this select statement is not fetching the record with this parameters. When i give the same parameters in se11 table t512w.. It has one record, but here the sy-subrc Value is 4.
select * from t512w where molga EQ '15'
         and lgart in g_lgart01
       and endda gt pn-endda
   and begda lt pn-endda.

Dear Mohamed,
This Select Statement is bound to Fail. When you are doing a select * from T512W, you intend to get a single record from T512W into the work area T512W which you have declared using TABLES statement. So, here you need to use Select single instead of Select *
If you want more data, then you declare an internal table, say gt_t512w type standard table of t512w and use "
Select from T512W
Into TABLE GT_T512W
WHERE ........
Hope this solves your problem.
Regards,
Amit Sharma

Mailbox database contentindex state is failed

Hi,
I have two mailbox servers in DAG (MBX01 & MBX02).
when I check database copy status it show contentindex state failed on mbx02 server.
I tried with command update-mailboxdatabasecopy -identity database1 -catalogonly but it is gives error;
The operation couldn't be performed because 'database\*' matches multiple entries.
how to resolve it, please share resolution.

Hi,
Please seed the content index catalog using the Update-MailboxDatabaseCopy -CatalogOnly cmdlet to check the result.
You need to specify the Mailbox server on which the database1 is, here is an example for your reference.
Update-MailboxDatabaseCopy -Identity DB1\MBX2 -SourceServer MBX1 -CatalogOnly
For more details about this command, you can refer to the article below.
http://technet.microsoft.com/en-gb/library/dd335201(v=exchg.141).aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

HT4539 cannot play game after purchase - states: "regrant failed - please purchase the software application first.

downloaded several times and started playing only to find out it did not download??
sates: regrant failed-please purchase software application first.
Playrex states there is an issue when setting up. I would prefer a refund at this time
since I have already played the beginning numerous times and wish to make a different purchase
please advise....thanks

Thank you soooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo ooo much i switched back i actually bought it thank you thank you thank you thank you

JSF 1.0 - client side state saving fails

Existing screen worked fine in Beta with client-side state saving. Fails in 1.0 Release with:
java.lang.NullPointerException
     at javax.faces.component.UIComponentBase.processRestoreState(UIComponentBase.java:997)
     at javax.faces.component.UIComponentBase.processRestoreState(UIComponentBase.java:1008)
     at javax.faces.component.UIComponentBase.processRestoreState(UIComponentBase.java:1022)
     at javax.faces.component.UIComponentBase.processRestoreState(UIComponentBase.java:1008)
     at javax.faces.component.UIComponentBase.processRestoreState(UIComponentBase.java:1008)
     at javax.faces.component.UIComponentBase.processRestoreState(UIComponentBase.java:1008)
     at com.sun.faces.application.StateManagerImpl.restoreComponentState(StateManagerImpl.java:273)
     at com.sun.faces.application.StateManagerImpl.restoreView(StateManagerImpl.java:186)
     at com.sun.faces.application.ViewHandlerImpl.restoreView(ViewHandlerImpl.java:239)
     at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:157)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
This exception is found in tomcat log. Nothing found in debug log. I switched state saving to server and screen works, however, I need the application to work with client state saving.
Some screens in application work with client state saving. Some don't. All those that fail have the same exception as above.
Any ideas?

Hello
I have the same problem but i am not using any verbatim tag in my case the problem only appears when i am using two custom validators for a inputtexd in the same page .
the problem is solved using the server saving method but i want to use client saving method.
If you have any ideas please help .
this is the exeption :
java.lang.NullPointerException     at javax.faces.component.UIComponentBase.processRestoreState(UIComponentBase.java:1004)     at com.sun.faces.application.StateManagerImpl.restoreComponentState(StateManagerImpl.java:352)     at com.sun.faces.application.StateManagerImpl.restoreView(StateManagerImpl.java:240)     at com.sun.faces.application.ViewHandlerImpl.restoreView(ViewHandlerImpl.java:228)     at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:157)     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)     at org.apache.myfaces.component.html.util.ExtensionsFilter.doFilter(ExtensionsFilter.java:122)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)     at java.lang.Thread.run(Thread.java:534)
thanks
yinbr
Message was edited by:
yinbr

HA state progression failed

Similar Messages

Maybe you are looking for