HA-VMM cannot be installed : HAVMM name in db is differs from the user specified HAVMM name

I have a two node HA VMM cluster.  This is working correctly and has been for while.  I am now attempting to add an additional node to the cluster.
I joined the node to the cluster and then start the VMM install and follow the wizard till it gets to the Database Configuration Page.  When I Click Next here nothing happens.
If I check the C:\ProgramData\VMMLogs\SetupWizard.log file I see the following error as the last item.
HA-VMM cannot be installed : HAVMM name in db is differs from the user specified HAVMM name
If I check the S
CVMMCDB01 I find the HAVMMName property with a value of SCVMMC01.domainname  This is the same value that is returned when using powershell with Get-SCVMMServer
When I check the cluster configuration it is the same story.  I connect to the  cluster name scvmmc01.
Even if I look at Cluster Manager I can see the name is tied correctly.
Any ideas would be great as I am effectively now stuck and cannot install another node.

Greetings!
It happened because you renamed your VMM cluster after first node installation.
Juts update HAVMMName value in dbo.tbl_VMM_GlobalSetting. Start SQL Server Management Studio, connect to your VMM DB, and Edit table.

Similar Messages

  • How can i set the "Keep the following number of major versions" to a limit suppose 20 and then disable it from the users so that they cannot change the value?

    I want to set the value of "Keep the following number of major versions" in the versiong settings of a documnet library to a limit say 20 and then disable the option from the users so that they cannot them. Is it possible thorugh some custom coding?

    Hi Moumita10,
    Just curious about that how the custom CSS code works in your environment if put it in the “LstSetng.aspx” page.
    In my environment, it hides the "Keep the following number of major versions" setting in the “LstSetng.aspx”
    page after applying the custom CSS style there.
    Thanks
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to install and use a plug-in downloaded from the apple site?

    how to install and use a plug-in downloaded from the apple site?

    Emelie,
    which plug-in do you want to install?
    some of the plug-ins come with an installer on the disk image, you click the installer and it will install it in its proper location.
    For others you move the plug-in into to System Library or your User Library:
      Your Hard disk  > Library > Application Support >Aperture > Plug-Ins > Edit
    or
    Your Home Folder > Library > Application Support >Aperture > Plug-Ins > Edit
    If it is an "Edit" plug-in, it goes into the "Edit" subfolder, "Export" plug-ins into the "Export" subfolder.
    You can tell by the extension, what kind of plug-in it is.
    E.G. BorderFX.ApertureExport is an export plug-in, BorderFXEditPlugin.ApertureEdit an edit plug-in.
    Regards
    Léonie
    P.S. In OS Lion the Libraries are hidden by default: To reveal your User Library activate the Finder and select from the main Finder menu:
        Finder >  Go , then hold down the ⌥-option-key, untill the Library appears in the drop.down menu.
    To show the System Library:
         Finder >  Go > Go to Folder
    then enter   / Library

  • The game "horn" does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!, The game horn does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!

    The game "horn" does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!, The game horn does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
    http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
    Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Delete the app and redownload.
    Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
    http://support.apple.com/kb/ht2519
     Cheers, Tom 

  • After installing Lion I can't I boot from the Techtools CD.

    After installing Lion I can't I boot from the Techtools CD. I have purchased the upgrade for Photoshop CS5 because CS2 does not launch in Lion 10.7.3. However I need to get the serial number for CS2 for the upgrade. I have waited over 30 minutes for the boot but never get more than the Apple logo. Any ideas anyone?

    Boot disks can't change when the firmware changes, lock you out.
    Techtools obviously uses Linux as a boot OS, so you need a Lion version.
    CS6 coming out in about 30 days, for 10.7 and 10.8
    How to revert your Mac to Snow Leopard

  • The version of the LabVIEW NI SoftMotion Module installed on the host differs from the version installed on the RT target.

    Hi,
    i got this problem when i want to deploy the project with softmotion 
    https://www.dropbox.com/s/at9r9w667i00qja/qqqqqq.png
    NI SoftMotion:  The version of the LabVIEW NI SoftMotion Module installed on the host differs from the version installed on the RT target. 

    Hi Eng.Tareq
    It would be better if you can give more information
    1. What is the software version are you using?
    2. What is your target hardware?
    You can check the above information by open MAX -> under software tab of both computer and you target
    I suspect that the software version of your host computer and the target is difference as state in the picture attached.
    TuiTui

  • Wifi has suddenly stopped working. There is an exclamation mark which takes me to network diagnostics. This asks me for network name and password. This is different from the startup wizard which only asked for a WEP key and modem name. What to do?

    My wifi has suddenly stopped working on my iMac, after working fine for almost a year. There is an exclamation mark on the wifi bars and when I click it, it takes me to a network diagnostics page. This page asks me for my username and password for the wifi, which I don't have. It is different from the WEP key and modem name, which I originally used to set up my connection. I have not experienced any problems on all my other wifi-enabled devices. Ipod touch, iPad, MacBook all work fine. What should I do?

    The name is the name of the network you created on the router. The password is the WEP password. You shouldn't be using WEP at all, as it's insecure and also seems to cause connection failures. Use WPA 2 Personal. If your router doesn't support it, get a new one.

  • Cannot open install assistant.  I get this error message: The application cannot be installed due to a certificate problem.  The certificate does not match the installed application certificate, does not support application upgrades, or is invalid.  Pleas

    How can I downloade a trial of Adobe Elements 12? 
    I followed the instructions to download assistant...but get this message: The application cannot be installed due to a certificate problem.  The certificate does not match the installed application certificate, does not support application upgrades, or is invalid.  Please contact the application author.

    Hi alposer,
    Please remove the copy of the Adobe Download Assistant you currently have installed and then reinstall the Adobe Download Assistant.
    Regards,
    Rave

  • How many computers can I install iWork's on after downloading it from the app store? on

    How many computers can I install Pages on after downloading it from the app store?
    I know it is only $20 but im am stuck between getting iworks or microsoft office.

    All of them, as long as you have the same Apple I.D.
    Peter

  • My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive.  Can't get it to run Hardware Test.  Disk Utility says disk OK - files are there. What can I do?

    My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard.   I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host.  But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning.  I can't get it to run Hardware Test - just get the white screen.  If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

    Hi-NRG Bwoy wrote:
    I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
    Reet the SMC and the PRAM
     Cheat sheet to help diagnose and fix your Mac
    Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
    clean the disk.
    If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    How to erase and install Snow Leopard 10.6

  • When I try to view the IDVD tutorials, I get a message that says: The video cannot be found. It may have been removed from the server.  HTTP 404. What do I do?

    When I try to view the tutorials in IDVD, I get the following message: "The vodeo cannot be found. It may have been removed from server  HTTP 404" What do I do?

    You don't say what version of iDVD you are using, nor what link you were using, but try these:
    A good guide to iDVD 7 can be found here:
    http://www.kenstone.net/fcp_homepage/idvd_07_stone.html
    Apple's tutorial on iDVD 07/08 is here:
    http://manuals.info.apple.com/en/idvd_08_getting_started.pdf

  • Installing WINDOWS - 7 WITH secondary display enabled from the time of installation

    We have MINI ITX motherboard, This board supports multiple display option  VGA, LVDS..For this configuration we prefer only LVDS.
    Currently, we are migrating from LINUX to WINDOWS,Initial installation process does not have any hicups. 
    However, when the installtion completes and ask for a reboot. The system by default switches to VGA and there is no display on lVDS.
    For this we have to connect an VGA display and complete the rest of the installation and set "Duplicate Desktop on Projector" to get the LVDS back.
    We definitely do not require any VGA interference during the installation process. Need some guidance fro enabling  /CLONE display mode from the time of installation.  

    Hi,
    Because of window doesn't embed LVDS driver, that's why LVDS device doesn't work during system installation. You do need to connect another VGA device to complete the installation.
    Another considerable workaround method you can try is that build a Windows image that embed LVDS driver, then use this new image to install Windows 7.
    On the other hand, you can try to install LVDS driver during WinPE phrase, put the driver on other drive or USB drive, then press SHIFT+F10, navigate to the location and install the driver for test. I do have no condition make a test for you, but you
    can have a try by yourself.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Report that gets full name from the users id in the computer name

    I don't even know if this is possible, but I am finding that quite often of late I am needing to get the users full name from the computer name.
    We have a standard where a computer name is in this format XXXXXXXUSERID.
    Is there a way to get the Full name from the USERID that is in the computername (not last logged on user).
    I am fairly sure that I might be able to work it out in SQLSMS but I really need it on the web reports form SCCM.
    If anyone has any ideas please let me know.

    Thanks, I want to add it to most my reports but this is the main one that I am using right now due to an audit. 
    SELECT DISTINCT
    CS.Name0 AS 'Computer Name', CS.Domain0 AS 'Domain', CS.UserName0 AS 'User', BIOS.SerialNumber0 AS 'Bios serial',
    SE.SerialNumber0 AS 'System Enclosure serial', CS.Manufacturer0 AS 'Manufacturer', CS.Model0 AS 'model', OS.Caption0 AS 'OS',
    RAA.SMS_Assigned_Sites0 AS 'Site', RAM.TotalPhysicalMemory0 AS 'Total Memory', SUM(ISNULL(LDisk.Size0, '0')) AS 'Hardrive Size',
    SUM(ISNULL(LDisk.FreeSpace0, '0')) AS 'Free Space', CPU.Name0 AS [CPU Name]
    FROM dbo.v_GS_COMPUTER_SYSTEM AS CS RIGHT OUTER JOIN
    dbo.v_GS_PC_BIOS AS BIOS ON BIOS.ResourceID = CS.ResourceID RIGHT OUTER JOIN
    dbo.v_GS_SYSTEM AS SYS ON SYS.ResourceID = CS.ResourceID RIGHT OUTER JOIN
    dbo.v_GS_OPERATING_SYSTEM AS OS ON OS.ResourceID = CS.ResourceID RIGHT OUTER JOIN
    dbo.v_RA_System_SMSAssignedSites AS RAA ON RAA.ResourceID = CS.ResourceID RIGHT OUTER JOIN
    dbo.v_GS_X86_PC_MEMORY AS RAM ON RAM.ResourceID = CS.ResourceID RIGHT OUTER JOIN
    dbo.v_GS_LOGICAL_DISK AS LDisk ON LDisk.ResourceID = CS.ResourceID RIGHT OUTER JOIN
    dbo.v_GS_PROCESSOR AS CPU ON CPU.ResourceID = CS.ResourceID RIGHT OUTER JOIN
    dbo.v_GS_SYSTEM_ENCLOSURE AS SE ON SE.ResourceID = CS.ResourceID
    WHERE (LDisk.DriveType0 = 3)
    GROUP BY CS.Name0, CS.Domain0, CS.UserName0, BIOS.SerialNumber0, SE.SerialNumber0, CS.Manufacturer0, CS.Model0, OS.Caption0, RAA.SMS_Assigned_Sites0,
    RAM.TotalPhysicalMemory0, CPU.Name0
    What I really want to do is add another column called owner that just has the UID in it, I will then try to pull the users full name into another column.. hopefully I am not biting off more then I can chew with this but i have thousands of records and i
    will be forced to export to excel or something then look up all the names if I can't do this...

  • I keep getting 'unknown error' after clicking 'install app' when trying to download Mavericks from the App store.

    Trying to install Mavericks from the App store on my 2011 11" Macbook air, (wihch has more than 15GB free space).  After clicking 'Install App', and entering the Apple ID password, I get 'unkonwn error'.

    You can't use Safari to download iPad apps. Only use iTunes/App Store.
     Cheers, Tom

  • Can I install Lion as a complete re-build from the App Store

    Hi,
    I have Snow and want to update to Lion.  When I do this I want to start again from scratch and do not want to carry over my acocunts and setting (my machine needs a good clean out). 
    If I upgrade from the App Store will I be given the option to do this? 
    If not I guess I have to go the route of creating a Lion Boot Disc as suggested here?
    http://www.macrumors.com/2011/07/18/make-an-os-x-lion-boot-disc/
    Thanks in advance for the support

    Once you have installed Lion, you can boot from the recovery partion, erase the boot partition, and reinstall -- but that means downloading it again. Creating a bootable installation disc or USB key will save time and bandwidth.

Maybe you are looking for