Hacked voice service

Someone hacked into my voice service and used $429 of international calling....a case was opened but when will it be removed from my bill and the situation resolved? Theresa

chopperfamily wrote:
Someone hacked into my voice service and used $429 of international calling....a case was opened but when will it be removed from my bill and the situation resolved? TheresaIf you have already registered the complaint and recieved a case number, you should follow up with Comcast directly.  These forums are basically user-touser help areas, not direct links to Comcast.   And I don't believe you would "want" that kind of information put out in a very "public" area.... Hope this helps! -=rAY=-

Similar Messages

  • On Plus support for Voice services

    Hi Friends,
    I am trying to explore use of onplus for Config, Monotoring and reporting for voice services (example UC50,ISR with CME/CUE cards as well as use of SRST).
    Could you please sugget any documentation I can refere for this req.
    Suresh

    Hi Suresh,
    The UC500 is a supported device. Please see this link for a feature summary of supported Cisco devices with OnPlus:
    https://supportforums.cisco.com/docs/DOC-17501
    Currently, we do not have any monitoring or reporting specific to voice services. The standard monitoring and reporting available for any device may be applied. In a future release, we may have additional voice features.
    Thanks,
    The OnPlus Team

  • How do I discontinue the Comcast voice service

    Why can't I discontinue Comcast Voice Service on line rather than call Comcast?

    You can do a online chat if you don't want to call
    https://www.comcastsupport.com/ChatEntry/Protected.aspx

  • What is the procedure for filing a complaint with the FCC regarding no voice service for over 6 days

    Is the FCC the correct goverment agency to file  a complaint when a problem woth voice  service cannot be repaired for 5 days.
    How do I go about filing a complaint.

    Google the words "FCC file complaint"

  • Why is the Voice Service Worst than any other phone?

    I am getting no signal/service in MANY spots and I never had this issue with my Droid X.  I have tried putting the phone in 3g mode only and have no better luck.  Latest software loaded and no better results as well as performance based option on for battery.  Is this phone the only 4g phone worst on voice service or are all 4g phones not working correctly with the new SIM authentication? I know the towers are there?????

    Hi Sean,
    I am sincerely sorry to hear you are having trouble with our customer support.
    Please, allow me to get in touch with you by email.
    Thank you.
    Arnaud.

  • Voice service down. No dial tone or light.

    It's recently come to my attention after expecting a call that my Uverse phone service is down. Checking the call logs, it looks like this problem started sometime after 8:00 p.m. on Saturday, the 11th. I've tried a number of things on my end to try and fix it, but nothing seems to be working. Figured I should try and get a second opinion here before escalating the problem to phone support. Supplemental information: Power, Broadband, and Service lights are all solid green. Voice 1 (Service line) is not lit.Homeportal page landing states the voice status on line 1 is not registered.Both TV and internet services are unaffected.Primary phone is a cordless system. Keep a spare landline plugged in at all times for power outages. No dial tone on either one.No apparent fraying or disconnection of inside wiring from protector (no NID installed) to homerun to RG. Outside pair is a buried drop.BBU light is green and is in proper working order.Solutions I've tried: Plugging a phone directly into the RG. Nothing happened. Still no dial tone.Power cycling the RG. No change. Did not restore phone service.The online repair tool automated diagnostics detected no problems. Followed steps for no dial tone, repair was not successful, stated that the RG needed to be replaced.Troubleshooted through TV access, resetting voice service had no effect.

    Factory reset the RG by depressing and holding reset bottom located near power connection on back of RG. (Valid for 3800, 3801 and 589 RG with TV service) Warning this restore default settings, any custom changes (ssid, password, etc) will need to be redone. Need to hold till all lights go out  with a green power light only (about 10-15 seconds).Give it 5 minutes or so to reload/recycle.... Does line1 light come on, yes check dial tone, call in/out. If no either RG replacement or phone has been removed from your account... Either way will need to call 1-800-288-2020. If you have the 3812 inid with i38hg, the factory reset is performed at the iPSU or white toaster size power supply by inserting a toothpick (or similar) into red line hole on upper left side.Again hold till both light (left/right) are flashing red.

  • Once the voice service has been stopped, can I sti...

    I am going to stop one of my phones' voice services, any ideas that might affect the phone that I might and might not be able to turn it on?
    Thanks
    Jack

    no, has nothing at all to do with the phone but rather your phone service, and that Is between you and your network carrier.

  • Does a 4G phone with a sim card get better voice service that a 3G I-Phone

    Does a 4G phone with a sim card get better voice service than a 3G I phone S

        Hi SonicT!
    Great question! Only data is transmitted via the 3G or 4G network. Is the something I can assist you with?
    Thanks,
    AyaniB_VZW
    Follow us on Twitter @VZWSupport

  • Using My Own Modem & Having Voice Service...

    I've always used my own modem (Motorola SB6141).  But at my new location I need to have voice service, so Comcast gave me a TC8305C that I really don't like.  How can I use my own SB6141 and still get the voice service?  Is there a stand alone device for voice?

    You can use only the TG862 and it would be best to place it in bridge mode so it acts like a plain modem, then you hang your own high quality router behind it just like you do now with the 6141.  If you browse the forums, you will find many posts about poor wi-fi and other networking issues on many of the gateway models.
    No real advantage having separates if you bridge the gateway.

  • On net voice services

    i dont know what to do about getting this off my phone.  calls and calls not made by me and oddly it says im calling my own number with 1115 before it as the outbound call made from supposively my phone.  1115XXXXXXXXXX<--like that.  im hacked, right?  help me if anyone knows how to get this ** out of my phone.  its been going on for months.
    <<Post edit to remove personal information>>
    Message was edited by: Verizon Moderator

    Please voice your opinion on .NET WCF interoperability by traversing to the survey link that is in the post:
    http://mymfe.microsoft.com/WCF/Feedback.aspx?formID=283
    FYI, there is only a week left for filling out the survey.
    We value your opinion greatly and appreciate your time in filling out the short survey.
    Regards,
    Madhu Lakshmikanthan
    Program Manager
    Interoperability Strategy
    Microsoft, Redmond, WA

  • Set Up for Caller ID for FiOS TV Customers IF YOU DO NOT HAVE DIGITAL VOICE SERVICE

    Set Up for Caller ID for FiOS TV Customers
    Caller ID for FiOS TV lets you see details of outgoing, incoming, and missed phone calls on your TV. There is no charge to FiOS voice and video customers for Caller ID. However, your FiOS services and Set-Top Box must meet the requirements for Caller ID.
    GO TO Menu Settings Caller Id and follow  clicks to Set Up Service on each TV if You Have a MDVR
    MY PLAN IS FREEDOM ESSENTIALS AND I DO NOT HAVE DIGITAL VOICE
    Tom
    Freedom Essentials, QIP 7100 1,Bose SOLO TV Sound System,,QIP 7216 P2,M1424WR Rev F, iPad 2 WiFi,iPhone 5,TV SYST INFO Release 1.9.5 Build No. 17.45
    Data Object 39.45

    Suggestion made in your other post. No reason to post in multiple places.
    Justin
    Verizon FiOS TV, Internet, and phone
    QIP6416-P1, IMG 1.7C, Build 09.83
    Keller, TX 76248

  • SUP failed over manually, voice service failed after FAILOVER, started accessing old voice vlan which was removed from config

    Hey guys, 
    I am pretty sure, my subject is kinda confusing. Sorry about that. Here is what happened. 
    1. 4510r with Supervisor V 1000BaseX, switched over to standby Sup, then reseated Active SUP, once reseat complete, switched again to get the reseated SUP up and running as Active SUP. 
    2. a simple maintenance which was supposed to cause no outage and it did not cause any outage as well. 
    3. however, what i did not notice was, even though the voice vlan was configured to access 2353, they were accessing vlan 453. 
    4. the change was made 2 weeks prior to this maintenance where voice vlans were previously accessing 453 and they were all changed to access 2353. configs were saved. 
    5. however, after the maintenance, the running config showed that they were acessing 2353 but when checking the mac address on the interface, it was seen accessing 453. 
    6. the fix was to remove the config and re add it , that fixed it. 
    Has anyone else experienced the issue ? What really happened there ?  
    software version: Version 15.0(2)SG5
    #sh module 
    Chassis Type : WS-C4510R
    Power consumed by backplane : 40 Watts
    Mod Ports          Card Type                                            Model             
    ---+-----+--------------------------------------+------------------+-----------
     1     2  Supervisor V 1000BaseX (GBIC)                 WS-X4516            
     2     2  Supervisor V 1000BaseX (GBIC)                  WS-X4516           
     3    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V  
     5    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V   
     6    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V   
     7    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V  
     8    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V   
     9    48  10/100/1000BaseT (RJ45)V, Cisco/IEEE   WS-X4548-GB-RJ45V   

    configs were saved many times prior to the maintenance. i did a " write mem ". 

  • Do you have to have phone voice service to have a data plan?

    I see all of this stuff about $25 and $15 data plans for the iphone.
    So my question #1, do I absolutely have to have a phone voice plan to make the data plan work?
    I use the iphone as a ipod basically: games, movies, music, with surfing web, email, ect over wifi. but I would occasionally like the ability to use it when not connected to wifi.
    Question #2: if there is no way to use the data plan without a cell plan, do they have 20 minutes a month plans? I currently use 10-12 minutes a month on my cell phone, but 20 minutes sounds good.
    if both questions are no and no, then I suppose I should get an ipad which can get data plans by itself.

    AT&T will not let you get a data-only plan for the iPhone. You must get both voice and data. And they do not, that I can find, have pre-paid plans for the iPhone.
    So if you do not need voice, you should indeed get an iPad.
    Regards.

  • "no voice service" no incoming/outgoing calls

    Recently purchased the Q10 & for the first day & half had no dramas.
    After that time I then began to experenice problems calling out. The device stating a call failure please try again later. I was in full reception & was able to use the device & it's other features without any dramas at all, using facebook & twitter etc.
    I originally thought it may have something to do with my service provider. After an exhausting & frustrating phone call with them they found no issue with my service but concided that they couldn't even call my phone.
    I then updated the software on the phone to the newest update. The phone worked again perfectly for about an hour until again the problem recurred.
    I am sure it is a software problem as I am writing & sending this while on my Q10 in the middle of Australia where at times data coverage is a premium.
    I look forward to a promt reply & solution to this issue

    Hi anyo and welcome to the BlackBerry Support Community Forums!
    What version of software do you currently have installed on your BlackBerry Q10? If you insert your SIM into another device, are you able to send and receive phone calls?
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Regarding Voice Services

    Does Verizon offer VOIP? I am wondering if it is possible to use my asterisk pbx and setup a trunk with verizon so I am able to use sip instead of using a kludge (Linksys SPA3102) or a Sangoma card to allow for land line to tie in. I hate that total garbage solutions given I use a Nettop for Asterisk with no avaliable PCI slots for a Sangoma card and SPA3102 does not do CID worth a **bleep**.
    Thanks

    Meh ohh well.. I use callcentric as my primary provider I was just hoping for lower pings. No loss really

Maybe you are looking for

  • Disk error?

    Ok. So I had a high end Macbook Pro 15" Early 2011 that came with Lion and I had upgraded to Mountain Lion. I started having 5 min boot ups a(and still do) I tried everything, almost, CCleaner, clear start up items, disk utility said disk was fine, e

  • How do I keep the order of sequentially named images from randomizing on import?

    I have several thousand images that I've named sequentially and I'd like to add them to my book, so that each image takes up a single page and the images display sequentially. The issue I've been having is that the order becomes jumbled when the imag

  • Deploying web dynpro java application successfully but not working

    Hi all, I have a web dynpro java application. When I deployed in my local portal (7.10 SP6) it is working fine. But when I deployed in another portal (7.10 SP2) it is not working totally. In system default trace I saw below exception: Failed to creat

  • ¿Cómo habilitar el botón Guardar en Reader 10?

    Hola buenas. Acabo de actualizar a la versión 10.0.1 del Acrobat Reader y ahora el botón Guardar sale en gris deshabilitado. En la versión 9 salía activo, pero ahora no sé porqué sale deshabilitado. ¿Cómo se puede volver a habilitar dicho botón?

  • Issue with employe attributes in SRM

    Hello All, In ECC HR Organization structure, multiple employees are assigned to single position. The organization structure along with employee data is replicated from ECC to SRM as it is with the help of ALE Standard interface and PFAL execution. Is