Hackerangriff iOS 7? - Zur verwendung von push-mitteilungen mit itunes verbinden ios7

Hallo,
mir kommt das ganze so vor als ab es einen Hackerangriff in Verbdingung mit der iOS 7 und iTunes update gibt!?
Die o. g. Meldung auf dem iPhone macht doch eigentlich keinen Sinn. Es gibt doch diese Funtion gar nicht.
Wird hier versucht über iTunes zu hacken?
Einige meiner Apps liesen sich seit dem iOS 7 gar nicht mehr öffnen oder das ganze Telefon war blockiert...
Ich gab seit der Installation von iOS 7 leider zwei ungewöhnliche Probleme mit meinem Mailkonto:
- Eine Terminabsage über den Kalender wurde 500mal versendet
- Eine Mail mit Facebook-Link wurde an mehr als 10 meiner Kontakte automatisch versendet
Ich habe erst mal meine Kennwörter geändert und iOS 7 neu installiert. Die Meldung hatte ich seit dem noch 1mal...
Hat jemand ähnliche Erfahrungen oder kann mir helfen!?

Habe genau das selbe Problem... Dazu kommt noch, dass ich FaceTime UND iMessage nicht aktivieren kann! Es regt mich so auf: Man zahlt Unmengen für die Hardware und Apple hat Monate Zeit für iOS7 und sie bringen es nicht auf die Reihe.
Sorry, aber Apple bringt's langsam nicht mehr, sie werden immer schlechter!
Bitte um iOS7.1 und das möglichst schnell oder um eine andere Lösung des Problems. Das schlimme ist ja, dass selbst die Apple-Website noch nicht einmal auf iOS7 abgestimmt ist, alle Anweisungen sind noch für iOS6.
Apple, reß dich mal wieder am Riemen und streng dich mal wieder an!!!
Liebe Grüße

Similar Messages

  • Zur verwendung von push-mitteilungen mit itunes verbinden ios7

    Seit der Installation von ios 7 auf meinem iPhone 5 bekomme ich folgende Meldung beim öffner verschiedener Anwendungen wie z.B. Dropbox, WhatsApp, Flippborad und es werden keine Nachrichten / Mitteilungen mehr gepushed.
    Wer kann mir hier bitte mit Tipps weiter helfen?
    Besten Dank!

    Habe genau das selbe Problem... Dazu kommt noch, dass ich FaceTime UND iMessage nicht aktivieren kann! Es regt mich so auf: Man zahlt Unmengen für die Hardware und Apple hat Monate Zeit für iOS7 und sie bringen es nicht auf die Reihe.
    Sorry, aber Apple bringt's langsam nicht mehr, sie werden immer schlechter!
    Bitte um iOS7.1 und das möglichst schnell oder um eine andere Lösung des Problems. Das schlimme ist ja, dass selbst die Apple-Website noch nicht einmal auf iOS7 abgestimmt ist, alle Anweisungen sind noch für iOS6.
    Apple, reß dich mal wieder am Riemen und streng dich mal wieder an!!!
    Liebe Grüße

  • IOS Kalender Push Mitteilungen

    Hallo,
    habe per Familienfreigabe die Kalender meiner Frau und mir freigegeben. (Nur lesen)
    SEit ein paar Tagen bekomme ich bei jedem Eintrag meiner Frau nicht nur die Push Mitteilungen über die Kalender APP Sondern auch eine E-Mail. Kann ich das irgendwo abschalten?
    Gruß Fritzle

    Got the same problem here, but it’s more than just push email. Immediately after applying the 8.0.2 IOS update, push email stopped. Don’t get anything immediately any longer. Emails on my work Exchange account are taking an hour or more to reach me. My office hasn’t touched the Exchange server configuration in months, and there’s been no change in how my Blackberry has been receiving emails on the same account (Blackberry is running that same account on BIS, so same 15 mins or less schedule applies to that device). Wasn’t sure if that was happening with the 8.0 update, but push email is definitely badly broken with 8.0.2.
    But the problem is not limited to push. All of my POP3 and IMAP4 email is also delayed an hour or more. No settings have changed, I still have my POP3 and IMAP4 accounts set to 15 minute polling. iPhone is not polling. POP3 and IMAP4 are also badly broken.
    And there’s one more symptom. Since applying IOS 8.0.2, battery life has dramatically improved. That’s a symptom of a very bad thing. Any time I’m home, I manually turn off carrier data, since I caught Verizon billing me for data usage that should have been passed for free on my home Wi-Fi system. Very often now when I wake up the device with Safari active and try to load a web page, Safari alerts that it needs carrier data and stops. That’s because there’s no Wi-Fi signal (icons confirm). There’s no Wi-Fi because apparently IOS 8.0.2 is turning off Wi-Fi, which shuts down all internet connected apps. Push email can’t work if there’s no data service active. Wow, isn’t that clever.
      But there’s one more bad side-effect this “power save” nonsense will have on cell customer’s accounts. If there’s no Wi-Fi active on this device when you’re within range but the device just woke up, but you haven’t turned off cell carrier data, guess which system will be billing you more for data when you thought your home Wi-Fi was taking care of business.

  • Zurück von IOs6 auf IOs 5 ?

    Zurück von IOs6 auf IOs5.1.1 ?
    Wer hat Anleitung ?

    Check hier
    http://www.chip.de/news/iOS-6-Downgrade-So-holen-Sie-sich-iOS-5-zurueck_57685945 .html
    Ich habe es aber noch nicht getestet...werde das nachher gleich tun...

  • Probleme bei gleichzeitiger Verwendung von mehreren RS232-Schnittstellen.

    Hallo, ich habe ein Problem bei der Verwendung von RS232 Schnittstellen zum Auslesen von Werten externer Laborwaagen. Die Waagen senden mit 1200 baud, 8 bits data, no parity, 2 stop bits. Ich habe mir in LabView7Express ein Programm geschrieben, in welchem ich mit Hilfe des I/O Assistenten VI die Waagenwerte auslesen kann. Zum Zeitpunkt der Programmierung war die Waage am COM 2 Port angeschlossen (diesen habe ich über die WindowsXP Systemsteuerung ebenfalls auf 1200 baud, 8 bits data, no parity, 2 stop bits konfiguriert). Das Programm hat auch perfekt funktioniert. Jetzt wollte ich eine zweite Waage (gleicher Typ wie Waage 1) an den COM 1 Port anschließen. Das Programm habe ich dahingehend veränd
    ert, dass ich den Teil für Waage 1 einfach kopiert und im I/O Assistenten den Port COM 1 ausgewählt habe. Waage 1 (am Port COM 2) wird jetzt weiterhin normal ausgelesen, für die Waage 2 (am Port COM 1) bekomme ich immer eine Fehlermeldung: bfff003e.
    Ich habe jetzt versucht das Programm neu zu schreiben (nur die Waage 2 am Port COM 1), bekomme jetzt aber im I/O Assistenten einen I/O Error. Beide COM Ports funktionieren (mit dem Windows HyperTerminal überprüft).
    Ich weiß da echt nicht mehr weiter und bitte um Lösungsvorschläge, lg axelwo

    Dieser Basic I/O fehler ist schwer einzuengen. Meistens sind das Probleme mit dem Deskriptor der Resource. Sind COM1 und COM2 unter MAX sichtbar? Kann man eine VISA session dazu öffnen und einfache befehle testen, wie z. b. "*idn?"? Ansonsten kann es auch was mit der Konfiguration des POrts zu tun haben. Hierzu benutzt man am Besten die Eigenschaftsknoten die mit VISA mitgeliefert werden. Anbei ein Kleines Beispiel, denke das sollte funktionieren:
    Attachments:
    visatest.vi ‏77 KB

  • IOS 5.1 no iCloud push to "music"

    I upgraded my iPad, 1st gen, with iOS 5.1 and the latest version of iTunes. I laso updated my itumes on my iMac to 10.6 which is was to addresses an issue where songs may skip when playing from iCloud. Now on my iPad, when I open my "Music" there is NO access to iCloud. At the bottom of the app there was a button named "More" that would let me choose my iTunes library, it is no longer there. Nothing else has changed on any Apple product I have other than these updates that were to fix problems that are now worse. Any thoughts??? Lost and cunfused!

    Reset iPad and the problem cleared up for now.

  • IPhone 4S mit IOS 7 wird nicht von iTunes erkannt

    Seit dem ich IOS 7 auf meinem iPhone 4S habe erkennt iTunes mein Handy nicht mehr, Mein PC Windows 8.1 erkennt mein Handy einwandfrei. Kann mitr jemand helfen?

    Google translate:
    As already mentioned above, my iPod is recognized by my laptop with Windows 8, but not from my iTunes. I have all the steps that I could find on the Apple side followed and also again reinstalled my iTunes. Does anyone know what could be the problem?
    See if yo missed anthing here:
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Beim Updaten von Apps kommt Feherlmeldung "Verbindung mit iTunes Store nicht möglich"

    Beim Updaten von Apps kommt Feherlmeldung "Verbindung mit iTunes Store nicht möglich"
    Ein Einkauf im Store ist aber möglich. Es besteht mit sicherheit eine WLAN Verbindung und auch das Passwort ist richtig.

    Also nach langem hin und her, habe ich jetzt folgende Lösung, die bei mir funktionierte (IPhone 4S, IOS: 5.1.1):
    1. Alle Apps richtig schliessen (2xHome-Taste und ganz schliessen)
    2. Einstellungen --> Allgemein --> Zurücksetzen --> Netzwerkeinstellungen
    Hinweis aus dem Handbuch:
    Beim Zurücksetzen der Netzwerkeinstellungen wird die Liste mit allen
    bisher benutzten Netzwerken und VPN-Einstellungen entfernt, die
    nicht mithilfe eines Konfigurationsprofils installiert wurden. WLAN wird
    deaktiviert und dann wieder aktiviert. Dabei werden alle eventuell
    vorhandenen Verbindungen zu Netzwerken getrennt. Die Einstellungen für
    WLAN und die Option „Auf Netze hinweisen” bleiben aktiviert.
    Wenn Sie VPN-Einstellungen entfernen wollen, die mithilfe eines
    Konfigurationsprofils installiert wurden, müssen Sie „Einstellungen“ >
    „Allgemein“ > „Profil“ und danach das zu löschende Profil auswählen
    und auf „Entfernen“ tippen. Dadurch werden außerdem alle anderen
    Einstellungen und Accounts im Zusammenhang mit diesem Profil gelöscht.
    --> Das IPhone startet neu ...
    3. Einstellungen --> Allgemein --> Datum&Urzeit --> Datum ein paar Jahre vorstellen
    4. AppStore starten und auf Updates gehen --> Jetzt kam bei mir die Fehlermeldung das keine Sichere Verbindung hergestellt werden konnte, da das Datum falsch eingestellt ist.
    5. AppStore ganz schliessen (2xHome-Taste und ganz schliessen)
    6. Datum wieder richtig einstellen
    7. AppStore starten auf updates ... bei mir ging es dann ab dem Punkt wieder!
    Gruß Scotty

  • Daten von neuem Iphone mit bestehender Itunes mediathek zusammenführen

    Hallo,
    Ich habe ein neues Iphone - welches ich schon mit Kalenderdaten gefüllt habe - und möchte dieses nun mit meiner Mediathek von Itunes verbinden.
    Dabei sollen die Daten in der Mediathek von Itunes und die Daten auf dem Iphone erhalten bleiben.
    Ist das möglich.
    Vielen Dank

    Refer to this article:
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296

  • I have iOS 7. When I go to the itunes store on my ipod touch it gives me a blank screen with nothing on it. I restarted my ipod touch and it didn't work. Can someone help me with this?

    I have iOS 7. When I go to the itunes store on my ipod touch it gives me a blank screen with nothing on it. I restarted my ipod touch and it didn't work. Can someone help me with this?

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>iTunes and App stores and sign out and sign back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      

  • HT1386 I am trying to download ios 5.1.1 on my iphone from itunes and i get an error message that my iphone cannot be updated because the filmware is not compatible?  What do I do?

    I am trying to download ios 5.1.1 on my iphone from itunes and i get an error message that my iphone cannot be updated because the filmware is not compatible?  What do I do?

    iOS 5 is only compatible with the iPhone 3Gs and later...
    Updating to iOS 5   http://support.apple.com/kb/HT4972

  • HT201184 My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    Helo, I asked your question to be moved... good luck!

  • How to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?

    how to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?

    how to restore:
    http://support.apple.com/kb/HT1414
    error code 21 fix
    http://support.apple.com/kb/TS3694#error1015

  • When I disconnect my iphone 3gs(iOS) from computer, the device disappears from my itunes. This prevents me from doing a wireless sync. how do i fix it so that my device stays on itunes without having to plug it in all the time?

    When I disconnect my iphone 3gs(iOS) from computer, the device disappears from my itunes. This prevents me from doing a wireless sync. how do i fix it so that my device stays on itunes without having to plug it in all the time?
    it worked the first few times i did it but the next day after i closed out of itunes once, the device only appears when i plug in my phone.

    Whenever a menu choice is grayed out, that is because you have Restrictions turned on in Settings.  Be sure to turn it off.
    You are confusing an itunes store account with an icloud account.  You two can continue using the same ID for itunes (thus sharing purchased music, apps, etc.), but you really should have separate accounts (different IDs) for icloud, since an account is intended for one user to keep his/her devices in sync.
    To create a new icloud account, go to
    http://www.apple.com/icloud/setup/
    Then go to Settings>icloud and scroll to the bottom of the screen and tap Delete Account.  (have restrictions turned off)  That will disconnect the device from the account but will not delete data in icloud or other devices.  Then sign in using the new ID.

  • After updating to iOS 8.0.2 the App Store and iTunes have disappeared, is anyone else having this problem? Help please!

    After updating to iOS 8.0.2 the App Store and iTunes have disappeared, is anyone else having this problem? Help please!

    Well, if they have truly disappeared then something is really messed up. For really messed up stuff, you need to set it to factory default condition, and then afterwards, restore it from your backup.
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414

Maybe you are looking for

  • Wont shut down properly

    MacBook new reinstall of 10.7.5,  will not totally shutdown.  I have to use the power button to shut down totally, then on startup it tells me it has not been shut down properly.  Restart is the same thing.  Tried disk permissions, repaired them, but

  • ...Simplest way to make Jar Files...

    I know there have been numerous questions about jar files and that this has probably been answered before. I am using Forte to develop a program. The program runs fine in Forte, and I used the jar packager to create a jar file. When I double click th

  • How's enlightenment 17 on Arch?

    Ok, I've reinstalled Arch about 5 times in the past month for numerous reasons, and i'm getting pretty sick of it. I now have a clean Arch install with X set up, but no DE/WM yet. I've tried KDEmod, but didn't really like the Windowsy-feel of it, Xfc

  • Safety stock alesrt

    If total stock of a material goes below safety stock user can get a message at inbox as an safety stock alert... How can be the scenario configured???????? Please suggest mmmmmme.......

  • Audio mic problem

    Hi guys, I've had my 925 for about a month and love it. Recently tho I shot some video and on playback there was a problem with the sound is it was just static noise, no distinguishable sounds. This happens when I try to record audio as well. Is this