Had 20GB partition (empty) deleted it but space was not returned to main Drive
As said in the title I had a 20GB Partition that was meant for windows, I never found a use for it so never installed windows. Then I desided to delete the partition by going into bootcamp and just hitting the minus button. Now in bootcamp it sais I have only one 160GB partition. But when I go to about, more info, storage(system information) it sais I have 60GB available of 140. I am missing 20GB of space that i would like to have back.
Any ideas?
Clone
Boot from Recovery or clone
Erase + Restore
I don't use Verify. And I don't fully trust Disk Utility to find all possible errors.
There is now with Lion a verify ALL partitions, including the GPT and others though.
In the past SL and earlier, if the backup volume information block (hidden) had an error, if part of the GPT wasn't, it would skip.
The only time you can map out bad blocks is during a format of all partitions, and it does test for bad sectors before doing so - those can't be changed or mapped out later.
Unless you have bad blocks, I'd just erase and restore.
Similar Messages
-
Deleted Disk Image but space is not available on hard drive
I was trying to share the iPhoto library across users by creating a Disk Image via Disk Utility.
It didn't go a planned as I needed more space than originally allocated. The resizing option in Disk Utility specified the Maximum Size was less than what I needed.
My next step was to delete this Disk Image, I believe I did this by selecting Edit > Delete
The Disk Image disappeared however the 80 GB never reappeared on my harddrive as available. I tried emptying the Trash but that did not correct the problem.
Any assistance would be much appreciated.No the /Volumes folder twtwtw is refering to is at the top level of the root disk.
To see it open a Finder window and select the Go menu item
then select Go to Folder…
Now in the window that opens enter /Volumes
Then Go
the /Volumes folder will open. There should be no regular files or folders in there -
Deleting songs but space is not being freed up
Hi there,
I was uploading some songs the other night and all of a sudden iTunes gave me a message saying that there is no more free space and that I should delete some photos. First off I don't have any photos on my touch. Second, I deleted some songs and although they were gone, no space was freed up. I tried syncing and everything still nothing. I got to the point where I was deleting playlists that were 100s of mbs large and still it does not free up any space.
I've tired the basic power down ipod, restart itunes etc but still nothing.
Any ideas? Please help! Dying to put on these deadmau5 songs!!!Hi there,
I was uploading some songs the other night and all of a sudden iTunes gave me a message saying that there is no more free space and that I should delete some photos. First off I don't have any photos on my touch. Second, I deleted some songs and although they were gone, no space was freed up. I tried syncing and everything still nothing. I got to the point where I was deleting playlists that were 100s of mbs large and still it does not free up any space.
I've tired the basic power down ipod, restart itunes etc but still nothing.
Any ideas? Please help! Dying to put on these deadmau5 songs!!! -
I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them? No, they were not part of previous Time Machine backups, and I have checked both the hard drive the documents were lost on and the new one that I now use for backups. Any suggestions would be helpful, as the lost files are old pictures that are gone forever. :[ Thanks!
1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
(110331) -
I just got a new macbook pro. I was in launchpad and there were two imovie icons so I clicked on one and deleted it.
It seems as though imovie is missing from my computer completely now. I have not emptied the trash, but it is not in there.
Where has my imovie gone and how do I get it back? I don't understand why it isn't in the trash or anywhere on my computer.
Please helpHi wjosten,
Yes, I have checked the app folder and there is no imovie in there, there is also nothing in the trash.
I have also checked the HD for imovie and it seems as though it's just gone?
Thanks for your help, if you have any other suggestions I would really appreciate them. -
i download a file in the torrent site which is MP4 but unfortunately i tried to delete it but i can not. but all the files that i have is easily to delete only MP4 files i can't delete in the download foldeer please try to help dont know what to do please
Well you can sync your iPod/iPhone to yur computer or laptop then take the photos off of your iPod like taking photos of of a SD card (from a normal camera) or off of a USB..! Good Luck. plz tick this saying This solved my question if it helps you.
-
why cant i download itunes on my windows 7 pc? i used to have itunes on my pc once but it was not uploded for a while and got deleted...and now i have tried to download it and all i got was "thanks for download itunes"...after that i have tired to dwnload it from another web browser and ive got the same thing.....!!
Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.
-
Error on extend an internal table, but the required space was not available
Hi All,
I am trying to retrieve cost data from COVP tables, as well as the quantity, cost centre, and price unit fields from MSEG / BSEG tables. Thing is, if the AWTYP value in COVP table = 'MKPF', i have to get the data from MSEG, otherwise, I need to get it from BSEG table.
I kept getting this error message:
<i>You attempted to extend an internal table, but the required space was not available.</i>
Anyone have any idea how to make my codes more efficient?
Please help. Thanks!
Regards,
Cecilia
REPORT ZMISCY004.
TABLES : COVP, BSIS, BSEG, MSEG, MAKT, CSKU.
PARAMETERS :
P_FILE(300) DEFAULT '\sapdcdatasaprptoh.txt' LOWER CASE.
DATA MSG_TEXT(50).
DATA :
XKOKRS LIKE COVP-KOKRS,
XBELNR LIKE COVP-BELNR,
XBUZEI LIKE COVP-BUZEI,
XGJAHR LIKE COVP-GJAHR,
XPERIO LIKE COVP-PERIO,
XWKGBTR LIKE COVP-WKGBTR,
XWTGBTR LIKE COVP-WTGBTR,
XREFBN LIKE COVP-REFBN,
XREFBZ LIKE COVP-REFBZ,
XKSTAR LIKE COVP-KSTAR,
XBEKNZ LIKE COVP-BEKNZ,
XMATNR LIKE COVP-MATNR,
XBUKRS LIKE COVP-BUKRS,
XREFGJ LIKE COVP-REFGJ,
XREFBK LIKE COVP-REFBK,
XLTEXT LIKE CSKU-LTEXT,
XMAKTX LIKE MAKT-MAKTX,
XAWTYP LIKE COVP-AWTYP,
XTWAER LIKE COVP-TWAER,
XSGTXT LIKE COVP-SGTXT,
BSEG_KOSTL LIKE BSEG-KOSTL,
BSEG_MEINS LIKE BSEG-MEINS,
BSEG_MENGE LIKE BSEG-MENGE,
MSEG_KOSTL LIKE MSEG-KOSTL,
MSEG_MENGE LIKE MSEG-MENGE,
MSEG_MEINS LIKE MSEG-MEINS.
DATA : BEGIN OF ITAB_COVP OCCURS 10,
KOKRS LIKE COVP-KOKRS,
BELNR LIKE COVP-BELNR,
BUZEI LIKE COVP-BUZEI,
GJAHR LIKE COVP-GJAHR,
PERIO LIKE COVP-PERIO,
WKGBTR(15) TYPE C,
WTGBTR(15) TYPE C,
REFBN LIKE COVP-REFBN,
REFBZ(3) TYPE C,
KSTAR LIKE COVP-KSTAR,
BEKNZ LIKE COVP-BEKNZ,
MATNR LIKE COVP-MATNR,
BUKRS LIKE COVP-BUKRS,
REFGJ LIKE COVP-REFGJ,
REFBK LIKE COVP-REFBK,
LTEXT LIKE CSKU-LTEXT,
MAKTX LIKE MAKT-MAKTX,
AWTYP LIKE COVP-AWTYP,
TWAER LIKE COVP-TWAER,
SGTXT LIKE COVP-SGTXT,
BSIS_WRBTR(13) TYPE C,
BSEG_KOSTL LIKE BSEG-KOSTL,
BSEG_MEINS LIKE BSEG-MEINS,
BSEG_MENGE LIKE BSEG-MENGE,
MSEG_KOSTL LIKE MSEG-KOSTL,
MSEG_MENGE LIKE MSEG-MENGE,
MSEG_MEINS LIKE MSEG-MEINS.
DATA : END OF ITAB_COVP.
SELECT M1~KOKRS
M1~BELNR
M1~BUZEI
M1~GJAHR
M1~PERIO
M1~WKGBTR
M1~WTGBTR
M1~REFBN
M1~REFBZ
M1~KSTAR
M1~BEKNZ
M1~MATNR
M1~BUKRS
M1~REFGJ
M1~REFBK
M1~AWTYP
M1~TWAER
M1~SGTXT
M4~KOSTL
M4~MENGE
M4~MEINS
INTO (XKOKRS,
XBELNR,
XBUZEI,
XGJAHR,
XPERIO,
XWKGBTR,
XWTGBTR,
XREFBN,
XREFBZ,
XKSTAR,
XBEKNZ,
XMATNR,
XBUKRS,
XREFGJ,
XREFBK,
XAWTYP,
XTWAER,
XSGTXT,
MSEG_KOSTL,
MSEG_MENGE,
MSEG_MEINS
FROM COVP AS M1
LEFT OUTER JOIN MSEG AS M4
ON M1~REFBN = M4~MBLNR AND M1~REFBZ = M4~ZEILE AND M1~REFGJ = M4~MJAHR
WHERE M1~SCOPE = 'OCOST' AND M1~AWTYP = 'BKPF'
OR M1~SCOPE = 'OCOST' AND M1~AWTYP = 'MKPF'
OR M1~KSTAR = '972022'.
IF XAWTYP = 'BKPF'.
SELECT KOSTL MENGE MEINS INTO (BSEG_KOSTL, BSEG_MENGE, BSEG_MEINS) FROM
BSEG WHERE BELNR = XREFBN AND BUZEI = XREFBZ AND GJAHR = XREFGJ AND
BUKRS = XREFBK.
ENDSELECT.
MOVE BSEG-KOSTL TO BSEG_KOSTL.
MOVE BSEG-MEINS TO BSEG_MEINS.
MOVE BSEG-MENGE TO BSEG_MENGE.
ELSE.
MOVE ' ' TO BSEG_KOSTL.
MOVE ' ' TO BSEG_MEINS.
MOVE ' ' TO BSEG_MENGE.
ENDIF.
*GET LTEST
SELECT LTEXT INTO XLTEXT
FROM CSKU
WHERE KTOPL = 'COAA' AND SPRAS = 'EN'.
*GET MAKTX
IF XMATNR <> ' '.
SELECT SINGLE * FROM MAKT WHERE MATNR = XMATNR.
MOVE MAKT-MAKTX TO XMAKTX.
ELSE.
MOVE ' ' TO XMAKTX.
ENDIF.
MOVE : XKOKRS TO ITAB_COVP-KOKRS,
XBELNR TO ITAB_COVP-BELNR,
XBUZEI TO ITAB_COVP-BUZEI,
XGJAHR TO ITAB_COVP-GJAHR,
XPERIO TO ITAB_COVP-PERIO,
XWKGBTR TO ITAB_COVP-WKGBTR,
XWTGBTR TO ITAB_COVP-WTGBTR,
XREFBN TO ITAB_COVP-REFBN,
XREFBZ TO ITAB_COVP-REFBZ,
XKSTAR TO ITAB_COVP-KSTAR,
XBEKNZ TO ITAB_COVP-BEKNZ,
XMATNR TO ITAB_COVP-MATNR,
XBUKRS TO ITAB_COVP-BUKRS,
XREFGJ TO ITAB_COVP-REFGJ,
XREFBK TO ITAB_COVP-REFBK,
XLTEXT TO ITAB_COVP-LTEXT,
XMAKTX TO ITAB_COVP-MAKTX,
XAWTYP TO ITAB_COVP-AWTYP,
XTWAER TO ITAB_COVP-TWAER,
XSGTXT TO ITAB_COVP-SGTXT,
BSEG_KOSTL TO ITAB_COVP-BSEG_KOSTL,
BSEG_MEINS TO ITAB_COVP-BSEG_MEINS,
BSEG_MENGE TO ITAB_COVP-BSEG_MENGE,
MSEG_KOSTL TO ITAB_COVP-MSEG_KOSTL,
MSEG_MENGE TO ITAB_COVP-MSEG_MENGE,
MSEG_MEINS TO ITAB_COVP-MSEG_MEINS.
APPEND ITAB_COVP.
CLEAR ITAB_COVP.
ENDSELECT.
ENDSELECT.
OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
IF SY-SUBRC NE 0.
WRITE: 'File cannot be opened. Reason:', MSG_TEXT.
EXIT.
ENDIF.
LOOP AT ITAB_COVP.
TRANSFER ITAB_COVP TO P_FILE.
ENDLOOP.
CLOSE DATASET P_FILE.Cecilia - I think your problemn is a nested select:
*GET LTEST
SELECT ltext INTO xltext
FROM csku
WHERE ktopl = 'COAA' AND spras = 'EN'.
*GET MAKTX
IF xmatnr <> ' '.
SELECT SINGLE * FROM makt WHERE matnr = xmatnr.
MOVE makt-maktx TO xmaktx.
ELSE.
MOVE ' ' TO xmaktx.
ENDIF.
MOVE : xkokrs TO itab_covp-kokrs,
etc.
mseg_meins TO itab_covp-mseg_meins.
APPEND itab_covp.
CLEAR itab_covp.
ENDSELECT.
Do you need to do the inner select for every cost element text?
Rob -
I converted some songs in iTunes to work with an eMusic device. I'd like to delete them, but I'm not sure which of the duplicated songs to delete. Some titles are black and some are gray.
let's just doublecheck some things quickly. do any of the affected songs play in itunes at the moment? if so, when you play them, do they ask to be authorised?
if so, does the authorisation go through successfully, or do you get an error message? (if you get an error message, let us know what it says. include error message numbers if you're getting any.)
if the authorisation seems to go through successfully, with the authorised songs sync to the ipod? -
I am trying to delete one entry in forms data by highlighting and deleting it but it is not working. Thank
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh -
Help, I get error 13019 when trying to sync my 5th generation ipod. I see others have had this error with the touch, but this is not the touch. Does anyone have any ideas what can be done?
follow the steps in this article first
=http://support.apple.com/kb/HT1451
after that restore your ipod and resync it
hope this helps:) -
i had join the Photoshop Photography Program, but still can not use the photoshop cc, the photoshop just ask me the serial no, but i can't find my serial no.
Hello,
see >>> http://helpx.adobe.com/creative-cloud/help/install-apps.html here >>> How many computers can I install on
I quote: You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
If you install on a third computer, it will request you to de-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
Good luck!
Hans-Günter -
I had an alias on mobile me but it has not transferred to iCloud although it is still active, how do I get it into iCloud?
Greetings Nefertiti72,
It seems you are experiencing an issue with contact syncing and management. It seems you've removed an email account which contained a number of contacts that are not associated with your iCloud account. I have linked to a knowledge base article which provides more information about iCloud contacts syncing:
Get help using iCloud Contacts - Apple Support
Learn what to do if you’re having issues using iCloud Contacts. For example, you might make changes to Contacts that don't update across all of your devices.
You may want to consider importing the contacts from the email account you removed. You can do it easily by following the steps in this article:
iCloud: Import a vCard
You can import an electronic business card, also called a vCard, into iCloud Contacts. If the vCard contains contact information for more than one person, each contact becomes a separate entry.
In iCloud Contacts, choose Import vCard from the Action pop-up menu , which appears at the bottom of the All Contacts list or a list of group contacts
Select a vCard to import.
The contacts from the vCard are added to the All Contacts group in Contacts. You can add the contacts to any other group by dragging them to the desired group.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D -
I had purchase one year protection plan but it is not updated till today how would I updated iPhone warranty my self
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
maybe this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar -
I already had verify an alternate email address but it seems not working for changing my security question
<Email Edited by Host>An alternate email address is not the same thing as a rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551
Maybe you are looking for
-
Hello, I have post the depreciation of asset, which is legacy asset & value arise through AS93. Now i realized that the i have charged more depreciation. hence While doing Debit manual depreciation of Asset through T code ABAA & using transaction ty
-
Crystal Reports Server 2008 trial install - unable to log into CMC
Hi, I have been looking for a way to host my existing Crystal XI reports on our in house web application rather than using a thick client application with cview. I was told that the options were Crystal Reports Server 2008 or Visual Studio 2008. I ha
-
CC 14 update means I have *two* Photoshops now?...
Now that the CC 14 update came through, I have two Photoshop application folders. Is it necessary to keep the previous CC version if I'm just going to use CC 14 from here on out? It'd be nice to get that HD space back. Thanks.
-
Limit scrollbars usage to usefull area?
hello all, I have been asked to restrict the front panel scrollbars to scroll the front panel not beyond the displayed component. How is it possible to do that in Labview (I use LV 8.0)? I have this requirement because the user is able to scroll very
-
Problems Exporting Keywords from LR5.3
Hi, I do all my keywording in LR and have it set up in various hierachies or nests and have made these "organising" keywords non-exportable. Prior to running an export, to convert to TIFFs I have checked what words will export and I am having probl