Had BSoD, entered single user, when rebooting get airport error..over and o

I had blue screen after installing leopard. I entered single user, removed some files suggested in another thread and then exited to reboot. I see:
Nov 17 Macintosh com.apple.launch[1] (com.apple.airport.updateprefs[]: posix_spawnp("/System/Library/PrivateFrameworks/Apple/80211.framework/resourses /updateprefs", ..): No such file or directory
I get this over and over and over and over. I assume this is why I had the BSod. Not sure how to get rid of it.
Any ideas?
Thanks!

I would recommend the following basic configuration for your network:
o Configure the D-Link as your primary Internet router that also provides the PPPoE authentication credentials to your ISP for Internet connectivity.
o Configure the 802.11n AirPort Extreme Base Station (AEBSn) as a bridge and connected to the D-Link by Ethernet. Also configure the AEBSn with the "Allow this network to be extended" option enabled.
o Configure the Time Capsule (TC) with the "Wireless Mode = Extend a wireless network" option enabled. It will be used to extend the wireless range of the AEBSn to the upstairs location.
o Finally configure the AirPort Express Base Station (AX) to join the extended wireless network so that it will be available for iTunes streaming.

Similar Messages

  • Fan issues after entering Single User mode

    Earlier, I went into Single User mode to run an application called Applejack. When my computer first loaded up, my fan became twice as loud as it normally does. I figured that would return to normal once I restarted my computer, but when I went back to my usual setup my fan is still incredibly loud. I attempted to restart my computer again, but that didn't help. Is there anything I can do to fix this?
    Just to clarify a few things, the fan begun to act up as soon as I entered Single User mode. I've tried looking into my System Preferences settings, but changing my Processor Performance doesn't seem to do anything unless there's something I need to do along with changing the setting. Thanks in advance!

    And just to be clear, in Single User Mode the computer's feedback about temps is not functioning... so your Mac assumes the worst, and keeps those suckers going full blast.
    I find this to be the case when it has crashed and I re-start in SUM. But if I shutdown normally, usually you can start in SUM and be ok fan noise wise.
    Quad 2.5   Mac OS X (10.4.6)  

  • I am concerned about the health of my current computer but have not yet made the commitment to a new one, but: 1) How can I transfer my iTunes account to a new computer when I get one... and 2) What can I do if my current computer suddenly implodes and I

    I am a bit of a computer/Internet/iTunes dummy....
    I am concerned about the health of my current computer but have not yet made the commitment to a new one, but:
    1) How can I transfer my iTunes account to a new computer when I get one...
    and
    2) What can I do if my current computer suddenly implodes and I have not yet 'copied/'saved'/otherwise protected my account, as is? -- I have already had my computer crash once and had one of your people help me restore all of the paid for songs (none of the uploaded from my own collection of CD songs, of course, so I had to spend a long time rebuilding that) -- and I believe I was told you could only help me recover that material one or two times altogether, no?
    WithOUT purchasing a Mach or iCloud (I actually think I have one of the later, but rarely have checked it) account, is there anything I can do to responsibly protect my account?
    Thanks for any time taken on this!!!

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

  • Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

    Have downloaded new Lightroom 5.4 from CC. When trying to launch am getting following error message and then Lightroom crashes: "an error occurred when attempting to change modules". Can't find a thread which relates to this error message.

    Hi 99jon,
    Many thanks for that. Had been going through this list yesterday and now again today:
    Ref  Solution 1: Lightroom is at its latest update
    Ref  Solution 2: It's interesting how I cannot find the Preferences file anywhere on my mac. (new mac pro, OS 10/9.2) . . .
    Ref  Solution 3: Lightroom doesn't allow me to do anything after the error message appears
    Ref  Solution 4: don't have any Nik Software plug-ins
    Ref  Solution 5: checked permissions and changed all to "Read & Write" - makes no difference
    Ref  Solution 6: I don't have a different user account on my mac.
    Not sure what else to do.

  • I had iTunes installed on my windows desktop computer and it suddently disappeared. I tried to reinstall it but get an error message and it won't reinstall

    I had iTunes installed on my windows desktop computer and it suddently disappeared. I tried to reinstall it but get an error message and it won't reinstall

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • What do I do when I get an error message: Could not write value ManageLLRouting to key\SYSTEM\CurrentControlSet\Services\BonjourService\Parameters.  Verify that you have sufficient access to that key, or contact your support personnel?

    What do I do when I get an error message: Could not write value ManageLLRouting to key\SYSTEM\CurrentControlSet\Services\BonjourService\Parameters.  Verify that you have sufficient access to that key, or contact your support personnel?

    See Troubleshooting issues with iTunes for Windows updates for general advice.
    For "Could not open key/write value" errors when reinstalling try b noir's user tip:
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
    [LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows but apply it to the branch in question.
    In this thread the OP found their AV solution appeared to be blocking access to the registry. 
    tt2

  • How to download itunes when you get runtime error R6034?

    HOW TO DOWNLOAD ITUNES WHEN YOU GET RUNTIME ERROR R6034?

    I obtained this information from    http://www.elabcommunications.com
    If you tried installing the latest iTunes on your Windows machine and it failed with this error message Runtime Error Message R6034, try this:
    Go to Control Panel > Add or Remove Programs (Windows XP) or Programs and Features (Newer Windows)
    Uninstall all of these items in the exact following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot your computer system, download iTunes, then reinstall using an administrative account or right-click the downloaded installer file and select Run as Administrator.

  • When i get on my phone and and go to my mail it says that the server is not connected

    When i get on my phone and go to email sign it says the server cannot be connected?  Then when I enter for updates it goes back and forth to the icloud and apple id and arent they both the same?

    where do i get answers?

  • When I get messages from Barnes and Noble, the text is blank. If I hit reply or forward, I can then see the content. This only happens with Barnes and Noble. Any suggestions on how to view the content?

    When I get messages from Barnes and Noble, the text is blank. If I hit reply or forward, I can then see the content. This only happens with Barnes and Noble. Any suggestions on how to view the content?

    I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
    I hope she gets her phone back.
    Best of luck.

  • HT3910 Once I register my MBP and create a user account, I get a gray screen and it does nothing.

    Once I register my MBP and create a user account, I get a gray screen and it does nothing.

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • I run windows 7/8 and lightroom 5.7  i am getting an error message and here it is " lightroom encountered and error when reading from its preview cache and needs to quit". I am getting this message repeatly.  What do I need to do to fix it.

    I run windows 7/8 and lightroom 5.7  I am getting an error message and here it is  " lightroom encountered an error when reading from its preview cache and needs t quit"    How do I fix this.

    THANKS
    Hank Wilkinson
    Please visit my web site  <http://www.hankwilkinson.com/> www.hankwilkinson.com for the latest of my photos
    For information on any of these photos please email me or call 612-756-9970

  • I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

    Hi there Fgonzalez2015,
    You may find the camera troubleshooting steps in the article below helpful.
    Get help with the camera on your iPhone, iPad, or iPod touch
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    -Griff W.  

  • HT201210 Just replaced the battery in my iPhone 4S.  Before doing so I backed-up then wiped the phone.  Now when I go to restore it, it gets about 3/4 done and that is when I get an error message, "Code 1." does this mean I fried it??  :-(

    Hello,
      Just replaced the battery in my iPhone 4S.  Before doing so I backed-up then wiped the phone.  Now when I go to restore it, it gets about 3/4 done and that is when I get an error message, "Code 1." does this mean I fried it??

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • I almost complete uploading a 32 page iPhoto book, on a number of occasions when I get an error message stating "An error occurred uploading your order" can anyone tell me why and provide a solution please?

    I am having problems uploading a photo book from my MacBook Pro!!! I almost complete uploading this 32 page iPhoto book when I get an error message stating "An error occurred uploading your order" This error message has occurred for each of my four attemps to upload. I have carried out a Disk Utility-Verify hard drive check and swapped from wireless to ethernet and still no joy. Can anyone suggest why this might be occurring and provide a solution please?

    Boot into Safe Mode and try again.

  • I'm uploading a photobook I made to be published.  I need assistance in getting it to apple.  The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading.  I have been trying all night.  Help!

    I'm uploading a photobook I made to be published.  I need assistance in getting it to apple.  The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading.  I have been trying all night.  Help!

    Welcome to the Apple Community.
    I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
    The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
    My syncs are immediate, I never get chance to see if it works in the background, sorry.

Maybe you are looking for