Had Enough / Pulling My Hair Out

I am extremely dissatisfied with all my Apple products currently and the issues just seem to get worse and its just getting to the point where I want nothing to do with Apple...
6-month old £1,500 Macbook Pro Retina - 16GB RAM - 2.8GHz i7
Doesn't wake up from sleep without restarting and losing anything open
Connects to a BT Wi-Fi despite deleting all BT networks from my list of preferred networks on a daily occurrence
Internet sometimes just doesn't work, despite being connected to the Sky Hub and all connection lights working, Safari just freezes and I can see Dropbox has disconnected - although other devices in the house are working fine
Kicks other devices connected to the Bluetooth speakers off, then cannot play anything to it without constant interruptions
Continuously told there is a problem with iCloud and have to re-enter my password almost everyday to see there is nothing wrong (as far as I can see)
Emails are no longer pushed to my Mac, I have to hear the notification on my iPhone then click Get Mail (or wait a few minutes)
Photoshop CS6 crashes, which I really didn't expect to be a feature on a machine with such high specification
I cannot connect to shares on my Western Digital NAS
Calendar refuses to open in full-screen mode despite me always using in full-screen mode and other apps (Mail, Safari) opening in full-screen mode when they have been closed in said mode
Safari is SOOOO SLOW; difficult to scroll down a page, always restarts and crashes
Finder opens folders however it see fits, despite having gone through and set the default view for my main folders
Calls from my iPhone ring on the Macbook for quite a while after I have picked it up on my iPhone (and this is a super pain when the laptop has connected to the speaker and its ringing full blast whilst I am trying to speak to someone)
2-month old iPhone 6 - 64GB
Cannot select which folder sent items should be saved to for one of my mail accounts (well I can, but as soon as I navigate away from the screen it goes back to the wrong one)
Phone crashes for a few seconds when opening any app
Constantly told there is an iCloud verification issue
Constantly informed that iCloud Photo Library has not updated for 7 days
Also that I need to connect to Wi-Fi for iCloud Photo Library to update - whilst actively using Wi-Fi
Also that iCloud is not signed in and iCloud Photo Library cannot update, then when I go to the settings there is a verification issue
Takes about 10 seconds for a call to connect (before ringing)
(Granted, a few years old) Airport Express in the room next to the router
Cannot play music to it without intermittent interruptions
Cannot play music if the device being played from is anywhere near the Airport Express or anywhere along the direct line between the Airport Express and the router
Sometimes can't even connect to it
...These are just a few things of the top of my head.
It's these small things that make it infuriating for me to complete simple tasks and sometimes just make the laptop/phone completely unusable. I would have expected better from something that isn't cheap at all. Maybe I am expecting too much?
Tempted to bin it all and go back to paper, pen, and landline as it seems nothing with regards to technology goes without mind-numbing interruptions.
I am sure there is no patch to install that will fix everything, but if you are an Apple expert and know how I might go about fixing just one of the above, I would really appreciate your response.

Thanks so much for your suggestion...
I have just been on the phone to Apple who instructed me to reset my SMC and PRAM which seems to have fixed the issue of waking after sleep, but see below for the results of the process...
Start time: 17:13:19 11/27/14
Model Identifier: MacBookPro11,1
System Version: OS X 10.10.2 (14C68m)
Kernel Version: Darwin 14.1.0
Time since boot: 7 minutes
Diagnostic reports
  2014-11-20 WindowServer crash
  2014-11-21 mdworker crash x12
  2014-11-22 com.apple.AmbientDisplayAgent crash
  2014-11-24 discoveryd crash
  2014-11-26 Finder hang
  2014-11-26 discoveryd crash
  2014-11-26 node-webkit Helper crash
  2014-11-27 Last.fm Scrobbler crash
  2014-11-27 Mail hang
  2014-11-27 Preview hang
  2014-11-27 QuickTime Player crash
  2014-11-27 node-webkit Helper crash x3
Log
  Nov 27 14:16:39 com.apple.spindump: Service exited with abnormal code: 75
  Nov 27 14:16:49 com.apple.spindump: Service exited with abnormal code: 75
  Nov 27 14:16:59 com.apple.spindump: Service exited with abnormal code: 75
  Nov 27 14:17:01 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.355: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
  Nov 27 14:17:01 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.355: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
  Nov 27 14:17:10 com.apple.spindump: Service exited with abnormal code: 75
  Nov 27 14:17:20 com.apple.spindump: Service exited with abnormal code: 75
  Nov 27 14:17:30 com.apple.spindump: Service exited with abnormal code: 75
  Nov 27 14:17:40 com.apple.spindump: Service exited with abnormal code: 75
  Nov 27 14:59:53 failed sending HISTORY_DONE (268435460) to pid 365
  Nov 27 15:48:57 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
  Nov 27 15:48:57 jnl: b(1, 4): replay_journal: from: 40621568 to: 8357376 (joffset 0x1a38b000)
  Nov 27 15:48:57 jnl: b(1, 4): journal replay done.
  Nov 27 15:49:11 utun_start: ifnet_disable_output returned error 12
  Nov 27 15:49:48 com.apple.xpc.launchd.domain.pid.BKAgentService.340: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/PrivateFrameworks/BookKit.framework/Versions/A/XPCServices/com. apple.BKAgentService.xpc
  Nov 27 15:49:48 com.apple.xpc.launchd.domain.pid.BKAgentService.340: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/PrivateFrameworks/BookKit.framework/Versions/A/XPCServices/com. apple.BKAgentService.xpc
  Nov 27 15:49:52 com.apple.xpc.launchd.domain.pid.MediaLibraryService.343: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/MediaLibrary.framework/Versions/A/XPCServices/com.ap ple.MediaLibraryService.xpc
  Nov 27 15:49:52 com.apple.xpc.launchd.domain.pid.MediaLibraryService.343: Path not allowed in target domain: type = pid, path = /Library/Frameworks/iTunesLibrary.framework/Versions/A/XPCServices/com.apple.iT unesLibraryService.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /System/Library/Frameworks/MediaLibrary.framework/Versions/A/XPCServices/com.ap ple.MediaLibraryService.xpc
  Nov 27 15:50:11 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.358: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
  Nov 27 15:50:11 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.358: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
  Nov 27 17:02:26 com.apple.iTunesHelper.12244: Service exited with abnormal code: 1
  Nov 27 17:06:01 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
  Nov 27 17:06:14 utun_start: ifnet_disable_output returned error 12
  Nov 27 17:06:17 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.277: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
  Nov 27 17:06:17 com.apple.xpc.launchd.domain.pid.om.apple.photostream-agent.277: Path not allowed in target domain: type = pid, path = /Applications/iPhoto.app/Contents/Frameworks/PhotoFoundation.framework/Versions /A/XPCServices/com.apple.PhotoApps.DevicePropertyReader.xpc error = 147: The specified service did not ship in the requestor's bundle, origin = /Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAgent.app
Activity
  CPU: user 7%, system 19%
  Net: 9371 in, 249 out (KiB/s)
CPU per process: WD Sync Service (UID 501) is using 55.7  %
Memory: kernel_task (UID 0) is using 1171 MB
kexts
  com.Cycling74.driver.Soundflower (1.6.6)
  cn.phyar.vtDisplayDriver.PhyarStudio (1)
Daemons
  com.skype.skypeinstaller
  com.oracle.java.JavaUpdateHelper
  com.apple.installer.osmessagetracing
  com.microsoft.office.licensing.helper
  com.google.keystone.daemon
  com.oracle.java.Helper-Tool
  com.adobe.SwitchBoard
  com.adobe.fpsaud
  org.macosforge.xquartz.privileged_startx
  com.westerndigital.WD-Sync-Installer
Agents
  com.quest.QuestAgent
  com.google.keystone.system.agent
  com.apple.photostream-agent
  org.macosforge.xquartz.startx
  plexus.PLEXUShelper
  com.wdc.WD-Sync-Service
  com.citrix.AuthManager_Mac
  com.oracle.java.Java-Updater
  com.apple.AirPortBaseStationAgent
Bundles
  /System/Library/Extensions/Soundflower.kext
  - com.Cycling74.driver.Soundflower
  /System/Library/Extensions/vtDisplayDriver.PhyarStudio.kext
  - cn.phyar.vtDisplayDriver.PhyarStudio
  /Library/Audio/Plug-Ins/Components/A52Codec.component
  - com.shepmater.A52Codec
  /Library/Internet Plug-Ins/AdobeAAMDetect.plugin
  - com.AdobeAAMDetectLib.AdobeAAMDetect
  /Library/Internet Plug-Ins/AdobeExManDetect.plugin
  - com.AdobeExManDetectLib.AdobeExManDetect
  /Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
  - com.citrix.citrixicaclientplugIn
  /Library/Internet Plug-Ins/Flash Player.plugin
  - N/A
  /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
  - com.oracle.java.JavaAppletPlugin
  /Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
  - com.microsoft.sharepoint.browserplugin
  /Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
  - com.microsoft.sharepoint.webkitplugin
  /Library/Internet Plug-Ins/Silverlight.plugin
  - com.microsoft.SilverlightPlugin
  /Library/Internet Plug-Ins/Unity Web Player.plugin
  - com.unity.UnityWebPlayer
  /Library/PreferencePanes/Flash Player.prefPane
  - com.adobe.flashplayerpreferences
  /Library/PreferencePanes/Hazel.prefPane
  - com.noodlesoft.Hazel
  /Library/PreferencePanes/JavaControlPanel.prefPane
  - com.oracle.java.JavaControlPanel
  /Library/PreferencePanes/Perian.prefPane
  - org.perian.PerianPane
  /Library/QuickTime/AC3MovieImport.component
  - com.cod3r.ac3movieimport
  /Library/QuickTime/Perian.component
  - org.perian.Perian
  /Library/ScriptingAdditions/Adobe Unit Types.osax
  - N/A
  /Library/ScriptingAdditions/QuestInvader.osax
  - com.quest.QuestInvader.osax
  Library/Address Book Plug-Ins/SkypeABDialer.bundle
  - com.skype.skypeabdialer
  Library/Address Book Plug-Ins/SkypeABSMS.bundle
  - com.skype.skypeabsms
  Library/Caches/com.apple.Safari/Extensions/AdBlock.safariextension
  - com.betafish.adblockforsafari
  Library/Caches/com.apple.Safari/Extensions/Pinterest.safariextension
  - com.pinterest.extension
  Library/Internet Plug-Ins/FacebookVideoCalling.bundle
  - com.skype.FacebookVideoCalling
  Library/iTunes/iTunes Plug-ins/AudioScrobbler.bundle
  - N/A
App extensions
  com.getdropbox.dropbox.garcon
Apps
  /Applications/Dropbox.app
Contents of /etc/ssh_config (checksum 2841432291)
    Host *
      SendEnv LANG LC_*
  Host *
      XAuthLocation /opt/X11/bin/xauth
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
  <?xml version="1.0" encoding="UTF-8"?>
  <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
  <plist version="1.0">
  <dict>
    <key>ServiceIPC</key>
    <true/>
    <key>MachServices</key>
    <dict>
    <key>com.citrix.AuthManager_Mac</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.citrix.AuthManager_Mac</string>
    <key>WaitForDebugger</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
    </array>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>Disabled</key>
    <false/>
  </dict>
  </plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 1863372808)
  <?xml version="1.0" encoding="UTF-8"?>
  <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
  <plist version="1.0">
  <dict>
    <key>Label</key>
    <string>com.oracle.java.Java-Updater</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
    <string>-bgcheck</string>
    </array>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>22</integer>
    <key>Minute</key>
    <integer>42</integer>
    <key>Weekday</key>
    <integer>6</integer>
    </dict>
  </dict>
  ...and 1 more line(s)
Contents of /Library/LaunchAgents/com.quest.QuestAgent.plist (checksum 1116535322)
  <?xml version="1.0" encoding="UTF-8"?>
  <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
  <plist version="1.0">
  <dict>
    <key>Label</key>
    <string>com.quest.QuestAgent</string>
    <key>Program</key>
    <string>/Library/Application Support/Quest Software/Agents/QuestAgent.app/Contents/MacOS/QuestAgent</string>
    <key>RunAtLoad</key>
    <true/>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>OnDemand</key>
    <false/>
  </dict>
  </plist>
Contents of /Library/LaunchAgents/com.wdc.WD-Sync-Service.plist (checksum 2537428734)
  <?xml version="1.0" encoding="UTF-8"?>
  <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
  <plist version="1.0">
  <dict>
    <key>Label</key>
    <string>com.wdc.WD-Sync-Service</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/WD Sync/WD Sync Service.app/Contents/MacOS/WD Sync Service</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>KeepAlive</key>
    <true/>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
  </dict>
  </plist>
Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist (checksum 2451978492)
  <?xml version="1.0" encoding="UTF-8"?>
  <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
  <plist version="1.0">
  <dict>
    <key>Label</key>
    <string>org.macosforge.xquartz.startx</string>
    <key>ProgramArguments</key>
    <array>
    <string>/opt/X11/lib/X11/xinit/launchd_startx</string>
    <string>/opt/X11/bin/startx</string>
    <string>--</string>
    <string>/opt/X11/bin/Xquartz</string>
    </array>
    <key>Sockets</key>
    <dict>
    <key>org.macosforge.xquartz:0</key>
    <dict>
    <key>SecureSocketWithKey</key>
    <string>DISPLAY</string>
    </dict>
    </dict>
    <key>ServiceIPC</key>
    <true/>
    <key>EnableTransactions</key>
    <true/>
  ...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.skype.skypeinstaller.plist (checksum 483910120)
  <?xml version="1.0" encoding="UTF-8"?>
  <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
  <plist version="1.0">
  <dict>
    <key>Label</key>
    <string>com.skype.skypeinstaller</string>
    <key>Program</key>
    <string>/Library/PrivilegedHelperTools/com.skype.skypeinstaller</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/PrivilegedHelperTools/com.skype.skypeinstaller</string>
    </array>
    <key>Sockets</key>
    <dict>
    <key>com.skype.skypeinstaller.socket</key>
    <dict>
    <key>SockFamily</key>
    <string>Unix</string>
    <key>SockPathMode</key>
    <integer>438</integer>
    <key>SockPathName</key>
    <string>/var/run/com.skype.skypeinstaller.socket</string>
    <key>SockType</key>
    <string>Stream</string>
    </dict>
  ...and 3 more line(s)
Contents of /Library/LaunchDaemons/com.westerndigital.WD-Sync-Installer.plist (checksum 192386510)
  <?xml version="1.0" encoding="UTF-8"?>
  <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
  <plist version="1.0">
  <dict>
    <key>Disabled</key>
    <true/>
    <key>Label</key>
    <string>com.westerndigital.WD-Sync-Installer</string>
    <key>OnDemand</key>
    <true/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/PrivilegedHelperTools/com.westerndigital.WD-Sync-Installer</st ring>
    </array>
    <key>ServiceIPC</key>
    <true/>
    <key>Sockets</key>
    <dict>
    <key>MasterSocket</key>
    <dict>
    <key>SockFamily</key>
    <string>Unix</string>
    <key>SockPathMode</key>
    <integer>438</integer>
    <key>SockPathName</key>
  ...and 7 more line(s)
Contents of /Library/LaunchDaemons/org.macosforge.xquartz.privileged_startx.plist (checksum 2883943871)
  <?xml version="1.0" encoding="UTF-8"?>
  <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
  <plist version="1.0">
  <dict>
    <key>Label</key>
    <string>org.macosforge.xquartz.privileged_startx</string>
    <key>ProgramArguments</key>
    <array>
    <string>/opt/X11/lib/X11/xinit/privileged_startx</string>
    <string>-d</string>
    <string>/opt/X11/lib/X11/xinit/privileged_startx.d</string>
    </array>
    <key>MachServices</key>
    <dict>
    <key>org.macosforge.xquartz.privileged_startx</key>
    <true/>
    </dict>
    <key>TimeOut</key>
    <integer>120</integer>
    <key>EnableTransactions</key>
    <true/>
  </dict>
  </plist>
Global login items
  /Applications/WD Sync/WD Sync.app
Proxies
  ProxyAutoConfigEnable : 1
  ProxyAutoConfigURLString : http://wpad/wpad.dat
  ProxyAutoDiscoveryEnable : 1
Listeners
  kdc: kerberos
  launchd: afpovertcp
  launchd: microsoft-ds
  launchd: ssh
User login items
  iTunesHelper
  - /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
  Dropbox
  - /Applications/Dropbox.app
  HazelHelper
  - /Library/PreferencePanes/Hazel.prefPane/Contents/Resources/HazelHelper.app
  properVOLUME
  - /Applications/properVOLUME.app
  iTouch-Server
  - /Applications/iTouch-Server.app
  BetterSnapTool
  - /Applications/BetterSnapTool.app
  WD Sync
  - /Applications/WD Sync/WD Sync.app
Safari extensions
  AdBlock
  Pinterest
Restricted files: 16823
Lockfiles: 11
Elapsed time (s): 231

Similar Messages

  • This new version of FireFox is making me nutz! It is SUCKING 100% CPU time almost constantly. I could just pull my hair out. I wpdated once a month or so ag

    I tried to add this in the topic already open but it kept sending me through the unending rabbit holes!
    My question is: How do I figure out what release I was on, get rid of this one and got back to a functional firefox that moves in realtime. I already did all the reset and etc.... I just want to go back to the speed I had. This halting , hanging up misery of a browzer is Sad. I have had firefox for years and always recommended it ..... BUT NOT ANY MORE. I agree with the other poster ... there should be a rollback feature. Peoples time has value and right now FireFox is sucking the value down a rabbit hole.
    See Below Comment Feedback submitted before I finally got here:
    This new version of FireFox is making me nutz! It is SUCKING 100% CPU time almost constantly. I could just pull my hair out. I wpdated once a month or so ago and it slowed down..... but the latest update before I did the reset really slowed me down. I came here to fix it a couple of dayz ago and did the reset firefox and now it IS RUNNING SO POORLY AND SLOW I AM ABOUT TO KILL IT OFF MY MACHINE!!! Yes that is me yelling - and it happened in SSSSSSSSSSSSS LLLLLLLLL OOOOOOOO WWWWWWWWWW Motion. I have run all the security scans and cleanups ---this needs a fix ASAP!!! PS: The hang ups and slowness is EVERYWHERE I go. I only get speed doing programs not connected to ON LINE.

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • I am pulling my hair out! I am using adobe indesign and just want to make a text box 'autofit text' as I change fonts a lot and want the font to automatically re-size as I change it. help help help please - I have latest version of indesign - thanks

    I am pulling my hair out! I am using adobe indesign and just want to make a text box 'autofit text' as I change fonts a lot and want the font to automatically re-size as I change it.
    Is it not possible to create a text box, fill it with dynamic (data driven) text, but make the font size either scale up or down automatically, so that the entire text box is filled? This is a feature in PrintShop Mail Pro called COPY FIT. but no such feature in Indesign??
    help help help please - I have latest version of indesign - thanks, DJ

    lol... it seems to work, but I have another huge problem!
    Apparently .CSV files cannot contain page breaks in the data! The data I am trying to merge is a 'letter', with paragraphs, line breaks, etc.,
    But, after data merging, it ignores page breaks and only merges the first paragraph of each letter. (sigh)
    Solution? Hopefully, an EASY solution. lol as we have thousands of records.
    Is there a third party indesign plugin that will allow .xml, or .xls data merge import??
    Thx,
    DJ

  • If anyone can help i would be hugely grateful, I'm literally pulling my hair out.    I bought the Airport express so i could surf the web and wireless play music through my stereo simultaneously. Can I do this? I've managed to play music wirelessly from m

    If anyone can help i would be hugely grateful, I'm literally pulling my hair out. 
    I bought the Airport express so i could surf the web and wireless play music through my stereo simultaneously. Can I do this? I've managed to play music wirelessly from my macbook to the express/stereo, however i cant surf the web because i can only presume i haven't set up the express to join my sky network.  So therefore the only way to surf the web at the moment is swap wireless devices from express back to my current sky network, then the airplay stops obviously.
    I've tried to join the express to my sky network/netgear router, at face value it looks simple.  The sky network name automatically comes up and then all i have to do is select the correct wireless security which i haven't got a clue which one my sky/netgear router is using, then type in the password which i presume is the network key number on the back of the netgear router?  However its not connecting??  I am doing something wrong?
    Can someone please give me some guidence on how to connect express to my current network?

    and then all i have to do is select the correct wireless security which i haven't got a clue which one my sky/netgear router is using
    Suggest that you ask Sky what type of wireless security that is used on the devices that they provide.
    Once you have that information, you can choose the correct matching setting when you configure the AirPort Express to "join" the Sky wireless network.
    The "password" would be the normal phrase that you use to connect to your wireless network at the present time.

  • Help, I am about to pull my hair out, can't get into a locked drive and Time Machine problem

    I've screwed everything up, I think.  I had Time Machine doing backups to an external 500Gig drive and somehow it got locked.  I went into Get Info to try and change the access but it won't allow me.  On top of this problem, my original drive died and I can't get into Time Machine to restore.  When I click "Enter Time Machine", nothing happens.  I created an eDisk and a startup disk to another external drive that I'm using now, but since everything that's been backed up is on the other drive that I can't access.  When I try accessing the drive it gives:  "The folder “G-DRIVE ” can’t be opened because you don’t have permission to see its contents."  I'm not knowledgeable enough to work from the command line, so if I need to do that to access the drive, please walk me though it.  As for the Time Machine problem, I have no idea how to recover anything since it won't even come up, it just sits there.  Outside of blowing my brains out, I don't know what to do.  Any help would be greatly appreciated as I can't afford to take it to Apple to let them try and fix it.

    Hello, not sure how this might affect a TM drive, or not, but...
    Here is what i needed to do for my drive "320GB HD", the last command is just for clean up
    Open Terminal and type these commands carefully with the spaces & change 320GB HD to the name of your drive.
    sudo chflags 0 "/volumes/320GB HD"
    sudo chown root "/volumes/320GB HD"
    sudo chmod 1775 "/volumes/320GB HD"
    sudo -k
    That said, these should be sufficient to do the job:
    sudo chflags 0 "/Volumes/320GB HD"
    sudo chmod a+rx "/Volumes/320GB HD"

  • Can't get battery to charge - please help before I pull my hair out

    My daughter and I both have the Curve 8530, first, her battery didn't seem to hold a charge very long, then her charging port stopped working.  So we started swapping the batteries.  When hers was low, I would give her mine with more charge and charge up the other one, using it until the first one needed a charge.  That started getting more and more frequent, now, all of the sudden I can't get either one to charge in my phone.  Figured out that hers doesn't charge because it is broken.  We can see a piece of metal that should be on the little tab in the port, laying at the bottom of the port.  Mine is a little loose after 2 years, so I sometimes have to wiggle the connection or make sure I set it down and don't move it when it is charging.  However, this is making me crazy.  It was plugged into my computer usb to charge all night and was completely dead this morning.  Which, is not a big suprise as the usb port on my computer doesn't always like to charge the BB.  Gives me an error saying not enough power.  So I plugged in the wall charger and let it sit.  It gets far enough that it will start the OS, but then sat there for hours and never changed from red and didn't get even 1 bar of charge.  Usually it only take a short time.  I read another post about an internal circular battery under the sticker with all the identification numbers on it, but I don't see any battery resembling that and am not comfortable taking my BB apart like that.  So any suggestions as to what the problem might be?  Or how to fix it?  My daughter's, though she doesn't think so, is not near as important as having at least one battery for mine due to work, etc.  Thanks for reading and any help.
    Jenn

    I would suggest trashing the .itl and .xml files to make sure you start clean (quit iTunes before you trash the files, of course). Then use the Add Folder To Library command and select your iTunes Music folder. That should get everything back into iTunes, though you won't get any playlists back unless you made a backup of them.

  • I Am At My Wit's End...Going Crazy...Ready To Pull My Hair Out HELP!!!!!!!!

    someone PLEASE help me!
    here is my problem:
    my loop browser likes to delete my loops. they just disappear for no reason....user loops as well as the apple ones. i have my loop folders where i believe is the correct location. but they aren't in the browser. i take that back....every time i open logic, some folders appear, some disappear...i open it again, different ones are there....the ones there the last time are now gone. basically they keep appearing and disappearing....most of them...some have never shown up in the browser. the last time i checked...all i had in there were the ones for the symphony jam pack. i'm afraid next time i open logic none will be there. i keep moving them in and out of the user and apple loop folders thinking that might do something. gah! i just don't know what to do. and god only knows if all the samples and loops i created are anywhere on my computer anymore. oh...and if i try taking the individual folders or files and drag them into the browser, logic freezes. and it doesn't matter anyway because those that i succesfully loaded into the browser that way have also disappeared.
    can someone please please please help me. i am desperate. i have had the most obnoxious day already. i am having all these problems with the computer, my car was towed (not my fault either), i woke up at 3am because i couldn't sleep....i'm just stressed and all i want to do is work on music.
    thank you for your help!
    also...i still haven't arse to register my copy....is it possible that there is some patch that i missing that i would remedy this. i'm just wondering if this a software bug or i just completely lose at the computer.

    maybe it does have to do with other apps. i wish i would have paid attention to when this started occuring so i could narrow down which application might be the culprit.
    the only thing that seems to be working right now is if i take my loop folders out of library/audio. i dragged some to my desktop (don't ask me why i did this) and imported them from there. for some reason they are staying in my loop browser. also when asked where i wanted to put the files, i selected them to go where the rest of the loops are at....in the proper directory. i'm thinking of trying this with all the loops and see what happens. something is corrupted and i'd like to know what and why. i admit, which i am embarrassed about, my computer is a mess. i really need to organise it and all that. actually, i am hoping hoping hoping to get a macbook just for my music. it would make life easier for me seeing i am quickly running out of room on all my hard drives.
    the only loops i am having trouble locating are all the ones i made recently. which i am upset about. but i am sure they are here somewhere. i just need ot wade through the mess to find them.
    thank you for your help.

  • New burning problem....pulling my hair out

    i have burned movies successfully many times. i make them in imovie and then burn via idvd. i just finished one that is 1 hour and 8 minutes long. i chose share -- then idvd to burn. however, when i attempt to burn, and am prompted for a disc, i put it into the drive and it spins for a while, then spits out the disc and i get a message that says "no recordable disc in the drive. insert recordable disc." i have a box of new recordable discs that i have never had a problem with. they are verbatim dvd-r 16x 4.7 gb/120 minutes of video. i keep unwrapping one and trying it -- but i get the same error message and now i have tried unsuccessfully with six new discs. i don't know what to do. the drive seems to be functioning correctly. it reads other dvd's and cd's. anyone have any help, thoughts, suggestions? thanks in advance!

    You may also wish to make sure your Mac is fully ready -- I use MacJanitor (get from VersionTracker) to trigger all the maintenance scripts and then Repair Permissions with Apple's Disk Utility.
    Check to see how much hard disk space you have available; 10-20 gigs is desireable. Also try breaking the burning into two parts as often recommended in these forums -- Save as Disc Image, then use Apple's Disk Utility (or Roxio Toast) to slowly burn the DVD.
    John

  • JNDI: Tomcat 5.0 Pulling My HAIR OUT!

    I am working on a site for someone, and I had it set up and running in my development enviroment on Tomcat 6.0. The user ended up signing for a shared account on GODADDY and they use 5.0.27, so I am reworking some stuff to get this working. For some reason, I can not for the life of me get the Connection Pooling to work with this setup, I can make a direct connection. I truly appreciate any help that someone has, I have been all over the forums, I really don't see where I have anything set incorrectly:
    Here is the top half of the stack trace:
    org.apache.commons.dbcp.SQLNestedException: Cannot create JDBC driver of class '' for connect URL 'null'
         at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:780)
         at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:540)
         at com.garytech.dao.ConnectionPool.getConnection(ConnectionPool.java:35)
         at com.garytech.servlets.Test.doPost(Test.java:51)
         at com.garytech.servlets.Test.doGet(Test.java:35)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: java.sql.SQLException: No suitable driver
         at java.sql.DriverManager.getDriver(DriverManager.java:243)
         at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:773)
         ... 30 moreHere is the Context XML:
    <?xml version="1.0" encoding="UTF-8"?>
    <Context path="/GaryTech">
         <Resource name="jdbc/garytech" auth="Container" type="javax.sql.DataSource"/>
         <ResourceParams name="jdbc/garytech">
              <parameter>
               <name>factory</name>
               <value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
             </parameter>
              <paramater>
                   <name>username</name>
                   <value>######</value>
              </paramater>
              <paramater>
                   <name>password</name>
                   <value>######</value>
              </paramater>
              <paramater>
                   <name>driverClassName</name>
                   <value>com.mysql.jdbc.Driver</value>
              </paramater>
              <paramater>
                   <name>url</name>
                   <value>jdbc:mysql://garytech.db.4239767.hostedresource.com?autoReconnect=true</value>
              </paramater>
         </ResourceParams>
    </Context>Here is the Resource Ref in the web.xml:
    <resource-ref>
        <description>DB Connection</description>
        <res-ref-name>jdbc/garytech</res-ref-name>
        <res-type>javax.sql.DataSource</res-type>
        <res-auth>Container</res-auth>
    </resource-ref>Here is just some code I threw in a servlet, to show how the direct connection is working and the connection pool is not, the ConnectionPool works fine in other implments, I have not modified that code. The commented out portion works fine, this just kinda was my way of knowing the MySql Driver is working fine and in the correct location. Any ideas PLEASE? :) Thanks!!
              try{
                   String url = "jdbc:mysql://garytech.db.4239767.hostedresource.com";
                   String uName = "";
                   String pwd = "";
                   //Class.forName("com.mysql.jdbc.Driver").newInstance();
                   //Connection connection = (Connection)DriverManager.getConnection(url, uName, pwd);
                   ConnectionPool cp = ConnectionPool.getInstance();
                   Connection connection = cp.getConnection();
                   if(connection != null){
                        System.out.println("connected");
                   connection.close();
              }catch(Exception e){
                   e.printStackTrace();
              }

    Hi Shawn,
    I am going crazy for last 15 days , but not found a solution . I called godaddy people , but no perfect answer . After looking at this thread I got my hopes back . Hopefully you read this message and will reply back.
    I am using godaddy Linux hosting shared environment unlimited with java support .
    I am able to connect to database directly through my JSP or servlet and able to get the result . I mean if I hard code the database connection string,userid and password . But if I use context.xml I am getting null pointer exception on the screen . As per the tomcat configuration install doc if you copy context.xml under META-INF/context.xml It will be picked by tomcat and writes it under conf\Catalina\localhost directory with your jar file name . In shared environment I am not getting a away to check this ..
    Is there any way to check the file copied properly or not to conf\Catalina\localhost directory?
    Or if it doesn't there any other way to implement connection pooling in Godaddy environment?
    and surprisingly the logs what they are asking me to check are under stats directory with error_logs directory . But that doesn't contain much information.Are there any other error logs I can check?
    You mentioned in the above message you were able to check the shared libraries they are hosting. How do I check it?
    Sorry for too many questions , But I am desperate .
    Thanks for your response .
    Regards
    Kiran

  • Want to pull your hair out? Try moving the HD/SD combo shows.

    Seems simple enough, right? You download an HD show on your desktop, which also comes with an SD version for your iPhone/iPod, and you want to put it on your laptop. Ah, things are never as simple as they seem. Try it yourself, or, simply back up your show (both versions), delete it from iTunes, and then try to put it back in your library.
    When you attempt to copy the shows back, only the HD version will copy over. The SD version will not be copied. If you try to manually copy the SD show, it won't. If you try simply moving it to the library on your own, next to the HD version, iTunes won't recognize it.
    There is no obvious or simple way to move or restore a combo HD/SD show. It's easy to move the HD or SD show into your library, but not both so they function as they did when first downloaded from iTunes.
    Has anyone else seen this issue? I was finally able to figure out a method to get it to work, but it's very convoluted and involves multiple steps that aren't intuitive.

    maybe it does have to do with other apps. i wish i would have paid attention to when this started occuring so i could narrow down which application might be the culprit.
    the only thing that seems to be working right now is if i take my loop folders out of library/audio. i dragged some to my desktop (don't ask me why i did this) and imported them from there. for some reason they are staying in my loop browser. also when asked where i wanted to put the files, i selected them to go where the rest of the loops are at....in the proper directory. i'm thinking of trying this with all the loops and see what happens. something is corrupted and i'd like to know what and why. i admit, which i am embarrassed about, my computer is a mess. i really need to organise it and all that. actually, i am hoping hoping hoping to get a macbook just for my music. it would make life easier for me seeing i am quickly running out of room on all my hard drives.
    the only loops i am having trouble locating are all the ones i made recently. which i am upset about. but i am sure they are here somewhere. i just need ot wade through the mess to find them.
    thank you for your help.

  • 3 attempts to export a movie from iMovie - pulling my hair out

    I have a large project in Imovie 11, mixture of video clips and photographs. I have tried 3 times to export to HD. This takes 11 hours to run  each time so you can imagine how frustrated I am!!!!  I am using the menu option SHARE, EXPORT MOVIE, and choosing HD. Like I said it takes 11 hours then I get error -49 cannot prepare movie, I have had this 3 times now so frustrated, please can anyone help me, what am I doing wrong?
    I read somewhere on this forum about running analyze video, but when I choose this the options are greyed out so I cannot choose any. Help before I jump out the window, thank you.
    Running on a MacBook Pro, Mountain Lion and 175GB free space on disk.

    geoffreyfrombasingstoke wrote:
    I have a large project in Imovie 11, mixture of video clips and photographs. I have tried 3 times to export to HD. This takes 11 hours to run  each time so you can imagine how frustrated I am!!!!  I am using the menu option SHARE, EXPORT MOVIE, and choosing HD. Like I said it takes 11 hours then I get error -49 cannot prepare movie, I have had this 3 times now so frustrated, please can anyone help me, what am I doing wrong?
    I read somewhere on this forum about running analyze video, but when I choose this the options are greyed out so I cannot choose any. Help before I jump out the window, thank you.
    Running on a MacBook Pro, Mountain Lion and 175GB free space on disk.
    Hi Geoffrey,
    Right-click (or Control-click) on one of the video clips in the project timeline. From the pop-up menu select Reveal in Finder. Now open the clip with QuickTime and select from the menu "Window > Show Movie Inspector". In the Inspector, tell us what is shown for Format and FPS (frames per second).
    It's possible that you are using an unusual video format (codec) that iMovie is having trouble with. Another possibility is that one or more of your photos is corrupted.
    One thing to try is to select from iMovie's menu "File > Optimize Video" (you mentioned Analyze Video, but that is quite different to Optimizing).
    Another suggestion is to turn off Time Machine when exporting, if you have that running.
    I may be back with other suggestions (but dish washing and wife's cuppa tea is beckoning)!
    John

  • Garageband is locking up.. I've tried everything.. Pulling my hair out!!

    I downloaded the newest version of GB.. Then bought the $4.99 expansion. My power flashed mid download. Every time I go to start GB now, the application locks up. I've tried deleting everything that has to do with GB off the computer and redownloaded the application. It still locks up. Anyone know what to do?

    I have not had this problem but I did have problem where my iPod would not turn on after it had just been on and I knew it had a charge. I suggest that you press and hold both the top button and the home button until the iPod turns on again. This might take 10 to 15 seconds. I believe this process can be found in the user manual if you want to find out what it is supposed to do. I also found the answer to my problem on this forum.

  • Pulling my hair out - WIN 7 laptop and WRT160N

    I bought the WRT160N when my old D-LINK 524 died after 6 years of flawless service.  Have had the WRT160N for a week and I am ready to send it back.  I have had nothing but issues (drop, slow connection, low signal).  Finally, today my internet service went out altogether (the provider).  When it came back NOTHING worked.  I had to hard reset the router and start all over.  I use MAC filtering only, so at least I didn't have to do the keys again.   Anyway, little by little I got all 10 devices to work with the router, except my son's laptop which is running WIn 7.
    It "sees" the SSID, but cannot connect at all.  I tried deleting the old network profiles, hoping the system would walk me thru creating a new one.  No such luck, so I now have a 3 month old top of the line laptop that can't do squat, and I need help before I give up on this router.  
    The problem is when you go to connect to the network, the SSID is there.  When you say connect, it says it can't.  The troubleshooter is useless.  I am not too familiar with Win 7, so I don't want to start hacking things.
    If anyone can help me out, I would much appreciate it.

    Try to turn-off the Mac-Filtering on the router and check if that works...If yes then,re-check the mac address you are entering in the list.It should be the wireless mac address of the computer.

  • Pulling my hair out....helpdesk are pants - can an...

    Honestly if I have to listen to another helpdesk operator tell me not to worry and they will sort my problem I think I will scream...so i am turning to the sanity of the forum - hopefully someone in the ether can help!
    We have always had really bad connectivity <0.2mbps. This is because of long line length. Then a couple of weeks ago our phone and consequently our ADSL lost connectivity. Openreach came out an fixed the phone - but the broadband has never come back up - this was logged under fault: VOL-012-************. The engineers cames out twice, first to fix and then to check the line when the broadband didn't come back on - the engineer said the line was fine - it was a problem with the back end....
    ....so I ring BT - they raise a new case VOL-051-************. The agent on the phone tells me that they can see the problem - but that it needs to be a raise to the L2 team - yet another set of pointless days waiting...
    Classic moment today when the L2 team say that it isn't there fault - Openreach need to visit - now we can guess what the answer there will be, a continuous circle of it isn't our fault it there...
    So is there someone out there that is a saine, sensible and informed BT person that can look at these cases and just tell me why my broadband isn't coming back on after there was a BT fault (I believe something on the Pole that was faulty)
    I hope for miracles!
    Thanks
    Dan

    welcome to the BT community forum where customers help customers and only BT employees are the forum mods
    for your security please delete vol ref numbers
    in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run  btspeedtester  (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
    are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • 4 numbers in 3 weeks - now pulling my hair out

    Bit of a long story so will try and keep it short.
    Decided to move to Virgin so advised BT Home I would be moving to an alternative phone-line provider.  Virgin let us down so immediately contacted BT and said please don't cancel our phone-line as we'd like to stay with you.
    The next day had a call from BT Home saying we're about to disconnect your line - I said NO please don't and was assured it wouldn't happen.
    2 days later disconnected.  Contacted BT who said that as the line had been "seized" I would have to set up a brand new account.
    3 days later had a new account with a new number so contacted BT and requested allocation of our original number and was told it would take 2 days.
    2 days later we had not been allocated our old number but a brand new number again.  Contacted BT and asked them to leave it as it was - forget our old number.  Was assured that it would stay as it was and so advised everybody of our new number.
    Today - 2 working days later guess what?  Another NEW NUMBER!
    I've spent hours on the phone to BT's call centre and whatever I say the opposite seems to happen apart from being lied to (one representative actually called me back claiming he had dialled our old number). We've now had 4 different numbers in the last 3 weeks - twice not even being told about the change.   Really don't know where to go from here. 

    Hi Chicky
    I am really sorry that everything went a bit haywire with your move.  I'll be happy to help you out here and try and get everything back to the way that you want it.
    What can I do here for you to try and sort this out?  Is there a particular number you want back or something else? 
    If its a number I cant guarantee it I'm afraid but I will certainly do my best to get it for you.
    Let me know what you think.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Maybe you are looking for

  • How do I move my library from Windows Vista hard drive that is now in an external box to a Windows 8 PC?

    My old PC operating with Windows Vista failed to reboot, ironically but only coincidentally right after I installed the latest Itunes update a few weeks ago.  It would not get past the DOS screen but getting that far I was at least able to conduct a

  • Open Directory, Active Directory, Both????

    Good morning from Paris, My company will migrate its Macintosh to Mac OSX 10.5 and I'm wondering what's best for Authentification and SSO. I did investigate a bit and finally choosed to add an Open Directory among our existing Active Directory. In or

  • Resize inner tables according to screen resolution

    Currently the page ( outer table ) widths are set to 760. Ideally we want set this to 100% so that the width will be relative to the monitor resolution. Also in the grid tables, the cols to be displayed is set to 4. We need to make this dynamic in re

  • Hide Applications

    I know how to "hide" an individual application and to "hide others" but is there a keyboard command to "hide all" applications that are open? Thanks, Tony iMac G5   Mac OS X (10.4.5)  

  • TREX searching portal Database

    Hello all, Is it possible to configure the TREX to search the portal database? and if so, when finding a desired record in the database, how the results are displayed? Thanks for your time, Adi.