Had my Mac Pro for 4yrs now, after charging it yesterday the display wont on, the keyboard lit everything seem to work except the display.

Hi

Hi Blackdisplay,
Thanks for visiting Apple Support Communities.
See this article for some troubleshooting steps that can help:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Jeremy

Similar Messages

  • How to erase a Mac Pro for selling when you don't have the discs

    I have a Mac Pro 1,1 that I'd like to sell, so I need to remove all information from the HD, BUT none of the disc I have seem to work to install from.
    I have several Macs and so have a lot of discs.....but none of them will work when I restart holding down C, or Command + R.
    I have gone to Disc Utility and can't select the HD to erase, because it seems to be greyed out.
    I have on original discs:
    10.0
    10.4
    10.4.7
    10.5
    10.5.6
    10.6.3
    all discs I either got with Mac's or purchased...!
    What's the solution?
    All I want is to be able to sell the machine with some working OS on it?
    Thanks,
    Alan,

    Thanks Grant
    The 10.6.3 disc would be the best. You will need a wired keyboard plugged directly into a USB port on the chassis, not on a display or any Hub.
         I am using wired kb.
    If you hold down Alt/Option key at Startup, that should invoke the Startup Manager, and slowly draw an icon for each potentially bootable Volume. Choose the one you want and tell it to proceed.
         So, right after I hear the chime, I should hold down "option"? How long should this take? A few times the computer seemed to freeze when doing this, and I just held down the power button for 10 sec to start over (I had a grey screen for a few minutes)...other times, it seems to just bypass the whole option and just restart normally?
    Answer only the "what language" question and do not install. Wait for the menuBar to be drawn, then choose Disk Utility off a menu.
    Appreciate any other suggestions you may have, thanks,
    Alan.

  • After installing Lion, I get an audio "instillation failed" message every tine I turn on computer. everything seems to work except microphone on roseta stone software.

    I have reinstalled OS Lion with same results.

    If you have an older version of Rosetta Stone, it was coded in PowerPC code which Lion is not capable of executing. I understand that they either have or will have a new version that is compatable with Lion.
    Allan

  • Ideal Mac Pro for After Effects

    I'm planning on buying a new Mac Pro for use with After Effects CS5.
    Between the single 3.33GHz 6-Core Intel Xeon “Westmere” processor model or the two 2.4GHz Quad-Core Intel Xeon “Westmere” (8 cores) processor model, which would be faster for working in After Effects CS5?
    Also how much RAM would be ideal? Would more than 16GB be worth it? Would the ATI Radeon HD 5870 1GB upgrade make a considerable difference?
    Thanks.

    Hate to say it but "it depends." But one thing is clear: 2.4GHz is slow and more cores don't make up or help.
    Maybe your work is with huge files or would benefit from a Quadro.
    3 x 8GB of RAM on 3.33GHz is general advice.
    And there are dozens of topics on the subject in
    http://www.macperformanceguide.com - be sure to click on Topics

  • Which  current Mac Pro for Aperture/Photoshop

    After much research and what seems to be chasing my tail, I though I'd ask the forum for some advice on which machine will best suit my needs. I am currently running Aperture and Photoshop CS3 and looking for a fast machine for the job. I sort through around 2500-3000 raw files per week and hope the new Intel Xeons will speed up my workflow. It's the question of "How many cores are better?" that's confusing me as I am unclear on how many Aperture and Photoshop can actually make use of.
    I'm looking to upgrade from my 3.06 iMac to a Mac Pro but having trouble choosing between a new 2.66 quad or a refurbished 2.26 8-core. I understand the drop in processor speed might be noticeable in some instances but the from what I have gathered an upgrade to the ATI HD 4870 is a must as is 6GB ram on the 2.66 and 8GB ram on the 2.26. It's not so much the price difference of the two machines (£2200 for the upgraded 2.66 and roughly £2700 for a refurbished 2.26 plus upgrades) it's will my workflow see any great benefits from the 8-core over the quad. The program I use most is Aperture, followed by Photoshop then FotoMagico, iDVD and Toast Titanium. Does Snow Leopard affect the use of cores in these programs?
    Any feedback is much appreciated or pointing in the direction of some real world tests as all the bench tests of the 8-core are so impressive but I'll not be using it for 3D/Video at all.
    Thanks in advance for your help.

    According to the Adobe blog the delay in offering a 64-bit suite for Mac is because the entire suite has to be rewritten in Cocoa (both previous and current offerings are written in Carbon) CS5 will be written in Cocoa and will utilise the full functionality of the Snow Leopard OS (OpenGL, GCD etc) so memory addressing will be a huge step forward on Photoshop (which I use).
    I used Photoshop CS4 on a 2008 Mac Pro 2 x 2.8GHz 8 core (dual Xeon 5400 series Quad core CPUs) and just recently switched to a 2009 Mac Pro 2 x 2.26GHz 8 core (Xeon 5500 series Quad core CPUs). I used CS3 on the original Mac Pro 2 x 2.66Ghz (Dual Xeon Dual Core CPUs = 4 cores total). It's not a fair reflection as CS3 ran under Rosetta on the original Mac Pro and CS4 has better integration on the Intel based Macs, but in general, I noticed a much better rate of workflow on the 8 core machines over the 4 core machine.
    More importantly, I would point out that running batch process of RAW files in CaptureOne Pro was significantly performing the batch process on the 8 core machines than on the 4 core machine. (250 RAW files {with no corrections] from a Canon EOS 1D MKII into 16-bitt TIFF files). I can't remember the exact figures but the 8 core machines were @ 23 - 25 minutes quicker than the 4 core machine.
    I know it's not scientific and software versions were different which could add to the different results in part, but the 8 core machines both out performed the 4 core machine substantially.
    However, the 2009 Mac Pro Quad Core is capable of running 2 threads per core (in effect a virtual 8 core machine and as many reviewers have pointed out, perform faster than the 8 core Mac Pro in certain applications (which have not been written to utilise the full multi-CPU-multi-core environment.
    The Memory limitation on the Quad Core is 16GB RAM (Apple state 8GB but reviewers have installed 4 x 4GB DIMMs into the Quad Core without issue). Unless you are doing 3D or HD rendering etc you probably won't really need over 16GBs of RAM, however the cost of 4GB memory sticks is expensive. Crucial only offer a 12GB kit for the Quad Core Mac Pro 2009 to make full use of the triple channel memory speeds (DDR3 best performance in multiples of 3) and 12GBs from Crucial is @£771.00 (prices correct at time of writing this. This equates to @ £257 per 4GB.
    Total for Quad Mac Pro with 12GB (3 x 4GB RAM) = £2670
    Total for Octo Core Mac Pro with 12GB (6 x 2GB RAM) =£2731 (New price not refurb)
    Graphics card upgrade etc will be the same on both machines. Memory based on Crucial Memory prices.
    So, for a 2009 Mac Pro with 12GB RAM, it is £61 dearer for an 8 core (virtual 16 cores) machine over the Quad Core Mac Pro. The 8 core system will give you further memory expansion once prices of the 4GB memory sticks come down significantly. The Quad Core will only be able to be upgraded with 8GB RAM sticks over the 4GB sticks available now and will cost a huge amount at time of launch.
    Buying a refurbishment 2.26 GHz with similar memory upgrade would in my opinion be the way to go. I know the CPU clock speed is lower, but in real time non memory intensive applications the difference will be hardly noticeable.
    I went through the same dilemma as you. I opted for the 8 core system with 12GB RAM and the ATI HD4870 graphics (bought as an upgrade kit so was dearer than the build to order option). I am very happy with my purchase.
    The other option is to check out eBay there may be a very well spec'd 2008 Mac Pro for sale with warranty, 16GB RAM and the 8800GT graphics card for less than either of the new systems.
    Over the long term, the 8 core offers more affordable customisation options over the Quad Core, but it depends on how long you plan to use the machine

  • I have had my MacBook Pro for almost 4 years now.  How do i permanently delete my deleted files?

    I have had my MacBook Pro for almost 4 years now. How do i perminantly delete deleted files?

    Your situation is not good, then. You will need to erase your hard drive and start anew. Boot from your installer DVD for the OS X version you have installed on it.
    I hope you have backups because it's not likely you can backup at this point.
    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc.  Insert the disc into the
             optical drive and restart the computer.  After the chime press and hold down the
             "C" key.  Release the key when you see a small spinning gear appear below the
             dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, set the format type to Mac
             OS Extended (Journaled, if supported), then click on the Partition button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.

  • Hi guys. I've had my MacBook Pro for 2 years now. Last night it suddenly kept glitching to a dark grey screen every now and then, then it would flash yellow / blue spots, and now it won't go past the grey screen even when I reboot it.  I don't think I can

    Hi guys.
    I've had my MacBook Pro for 2 years now. Last night it suddenly kept glitching to a dark grey screen every now and then, then it would flash yellow / blue spots, and now it won't go past the grey screen even when I reboot it.
    I don't think I can access my disk anymore as I've moved across countries since I've first gotten my laptop.  it was working perfectly fine before  it kept going to the dark grey screen with a little blue on the bottom.
    If it helps, my camera light is still on, and it seems that my computer is working properly itself, but won't go past this grey screen.
    I'm a college student and am really panicking about this - can anyone please tell me what to do?
    Thank you & sorry for the long post.

    What operating system are you running on it? (iOS 5.1 is for iPhone, iPad...not a Mac).

  • I had a code to get logics pro for free and after it installed its asking me for a serial number does anyone know what to do from here.

    I had a code to get logics pro for free and after it installed its asking me for a serial number but it never gave me one to put in, it just started downloading and then asked me. Does anyone know what to do from here.

    I really don't think that is anywhere near on track.
    Most likely the trial version was installed earlier, is that correct?

  • Updating your older Mac Pro for a few more years of good use...

    Hello everyone, I wanted to share my tips for getting your aging Mac Pro running better for Mavericks and the FCPX 10.1.
    Please note your Mac Pro's specs before doing what did..I am an editor and use the 3 big A's to get my work done. Adobe, Apple, Avid (not so much Avid)
    I got a great deal on it for only $1300. I did a bunch of research and decided my upgrade options were best for my machine and the way I use it so your upgrade options my differ slightly. (do your research!!!)
    I have 2009 Nehelem Mac Pro 2x 2.66 Ghz Quad-Core Intel Xeon.  Installed was 6GBs of factory RAM, an upgraded ATI 512 GPU, and 1,  1TB WD Black system drive. (this was a nice upgrade compared to my 4 core Mac Pro)
    I was running 10.8 and all my apps were installed and running. I installed 3 more 7200rpm drives to fill the drive bays. Momentus XT's 2TB each.
    (I upgraded to Mavericks, as  you know it overwirtes the old OS, I wanted the new FCPX...) more on this later.
    1- RAM,
    I removed the puny 6GBs of RAM it came with and installed 32GBs of 1066 Mhz DDR3 from OWC. I decided 32 would be enough for my needs looking into the App requirments and of course the cost. I noticed a slight difference in some performance. (to my dissapointment) fcpx beachballs!!
    However now you will have more RAM to allocate RAM for programs that can read it. After Effects anyone...
    link- http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#1066-memory
    2-GPU,
    I had a 5770 sitting in the closet, and put that in and bascilly it sucked!   I never like the 5770.  fcpx beachballs!!
    I contacted apple they informed me FCPX is written for GPUs and that a large card (while they didnt suppport it at the time) would be the best upgrade to better performance. So I installed the AMD Sappire 7950 3GB GPU from OWC. This is a monster card! and right away I noticed a huge difference in the perfromace of FCPX and AE! Not only that but the card supports up to 2K I believe... and is a great price... and for you gear heads it looks bad *** and the fan is super quiet!
    less fcpx beachballs
    link-http://eshop.macsales.com/item/Sapphire/100352MAC/
    3- Hardrive,
    Ok so now I'm thinking my machine is a beast! I have all this RAM and a huge GPU and the top ESATA drives you can buy, butI was still getting beachballs and FCPX was painfully slow at times..needless to say I felt Apple backing my in a corner to drink more coolaid a get the new small round black can...What to do???
    As I mentioned before I did not do a clean install....Most folks dont like going through the pain of 2 days to do a clean install but I knew deep down it would have ot be done. Before I did that I decided to do some research on those new SSD cards everyone is raging about. Remeber your Mac Pro's bus speed is only so big...remember this when doing this last and most important upgrade!!
    The market has all kinds of SSD drives for sale and OWC has a PCIe option (too much money for me) they have 3G drives 6G drives and so on. I could be wrong but buying a more expensive 6G card is a waste of money with bus speed of the Nehelem (this my differ with Westmere) I bought an of the self Kingston Hyper X 120GB (get at least 240GB if you can) and the OWC Mac Pro Drive Sled.
    This by far was the best upgrade! Before installation please go through the pain of the clean install...For Mavericks you need to create a bootable drive on a USB stick first. You then need to monut SSD in an empty enclosure in order to get it to mount for the OS to be installed
    OSX install Instructions-http://www.macworld.com/article/2056561/how-to-make-a-bootable-mavericks-install -drive.html
    link- Drive Sled http://eshop.macsales.com/item/Other%20World%20Computing/MMP35T25/?utm_source=go ogle&utm_medium=shoppingengine&utm_campaign=googlebase&gclid=COyxzMyOub0CFcqUfgo d8xUAPQ
    kin
    link-SSD http://www.kingston.com/en/ssd/hyperx
    PCIe Expansions
    H.264 Encoding-
    Matrox Compress HD PCIe card, This card is amazing however it does not support Compressor 4.1 but it does support legecy Compressor 3 and I did successfully install both Apps in Mavericks. (You must hide legecy versions in a folder in applications)
    ESATA CARD-  4 Port 6G Caldigit esata card.
    USB 3.0- Newertech 2 port USB3.0 Mac Pro Card. I dont recommend buying this card. Mac Pro Nehelem, was not made for USB3.0 and the drives I plug into it rarely mount...if ever mount... restart...when they do its a little faster than firewire and close to my Esata options. Dont bother....
    I have setup my drive structure as follow.
    Drive Bay 1 All System Apps run on the SSD drive.
    Drive bay 2 hold the contents of all the Media for my projects.
    Drive bay 3 hold all the AutoSaves and the FCPX Libaries and daily Project backups and renders.
    Drive bay 4 Is Special Effects drive.
    Dual Samsung 27 inch HD displays
    M_Audio Monitors
    1-3TB Caldigit RAID
    12-TBs of drives attached to every port on the back.
    2_USB docking ports voyager s3 for archive drives.
    Now that I have all these upgrades, a clean install, fresh updates to my softwares, my Mac Pro runs better that ever! My boot ups time is twice as fast as before and my OS is very snappy...Oh yeah FCPX, After Effects, Boris RED, Mail, Safari all open at the same time a running brilliantly!
    Many of us are not ready to upgrade to the new Mac Pro, and as we all know the legecy Mac Pro was built like a tank with military grade proccessors and endless upgrade options. It wont ever be as fast as that new black can but I know I will be working faster with my trusty Mac!
    Good luck!
    basementape films

    SSD Killer-fast Mac Pro
    Upgrade RAM to 16GB (4 x 4GB)
    Upgrade all the hard drives to 2TB
    Upgrade to 10.6.8 and CS5.5
    Replace graphic card with ATI 5770
    Upgrade the processors with X5355s, which is what many are doing now with theirs.
    Forget Lion. Dropped PowerPC and Rosetta code support
    Clone your drives.
    Keep 40% or more free space on any drive.
    Move any non-OS or applications off the boot drive to a data drive.
    Move system and apps to SSD
    Use SSD(s) for Aperture Library or stripe RAID.
    None of the above, sell yours and pick up a 2010 2.8GHz $2100 (people that want or need to run Tiger and PowerPC will likely pay $700 range for MacPro1,1). Upgrade the processor in  2010, with 6-core 3.33GHz $590.
    Apple Special Refurbished Mac Pro 2.8GHz Quad
    Intel Xeon W3680 3.33 GHz, SLBV2
    Intel Xeon UP W3680 3.33 GHz Processor - Hexa-core
    W3670 Upgrade photos
    At some point, it doesn't make sense to pour money into older system.
    But you can, and do it gradually one step at a time.

  • Help need my mac pro for school..it has Grey screen..spinning wheel...repaid disk ok...repair disk permission all repaired but one warning...

    Help need my mac pro for school..it has Grey screen..spinning wheel...
    I think I have  mountain lion OS X....I have done I think almost every suggestion I've seen in discussion boards.
    Boot in recovery repaired disk...ok...repair disk permission...all repaired but one warning...I've tried to reinstall lion (without losing data) and it Got all the way to one minute to be done and then the time change back two hours and kept doing this all night long.  I haven't done a back up due to no external for time machine.
    I hope someone can please help me I've been going crazy for a week now trying to figure this out.  I use my computer for school and I'm currently very behind from in my school work  thank you
    Also I've checked my available space  424.91 free of 750 gigs....disk is verified

    Welcome to the Apple Support Communities
    Try holding the Shift key while your Mac is starting to start into safe mode. Then, after starting in safe mode, open Finder, select Go menu (on the menu bar) > Go to Folder, and type /Library/StartupItems. Then, empty this folder and restart the Mac.
    If your Mac starts after doing this, it was a problem with a third-party app that starts automatically when you turn on the computer. It won't start automatically anymore after doing that

  • New Mac Pro for film scoring....

    Hi guys,
    I'm ready to upgrade my Quad G5 to a brand new MacPro.....
    I plan to use Logic 9 and NI Komplete, Spectrasonics libraries, VSL Orchestral Cube (+ eventually Appassionata Strings), Kirk Hunter and Gariitan Orchestral Strings, EW Steinway B and PMI Grandioso Bosendorfer 290, Sam Horns and many many other sample libraries converted from Giga format to exs24 and Kontakt format plus a bunch of virtual synths....
    My actual template consist of 200 assigned tracks but I only can play simultaneously 30-35 with effects (6 Space Designer and 10-12 Sonnox plugs) at 48 Khz sample rate and low poliphony....
    My actual G5 will become a slave (streaming part of my template samples to the new Mac Pro)..
    So I'm oriented to the Xeon Quad core "Nehalem" 3.2 Ghz with 16 Giga Ram...
    What can I expect in terms of sample streaming and V.I. performance from such a system?
    Thank you

    Hello,
    Up until recently I had a similar setup. My main Mac is a 2008 8-core Xeon with 16 GB RAM, and my main slave machine was a 2005 dual 2.3 GHz G5 with 8 GB RAM. My scoring template for the last 2 years (running on those 2 Macs) contains 300 tracks/instruments and 12 reverb buses, mostly running Space Designer.
    On the Mac Pro I host 228 of those instruments; 128 of them are Kontakt instruments, 16 are EastWest Play instruments, 8 are VSL instruments (matrices) and 76 are Logic EXS instruments. All of these stream samples in real time from 9 dedicated SATA drives.
    On the G5 I ran 72 more Kontakt-based instruments (East West Platinum orchestra & Storm Drum 1 percussion), also streamed from SATA drives. MIDI was routed via ethernet and audio from the G5 was returned via ADAT litepipe.
    That system worked flawlessly - I think you'll be thrilled! I've since replaced my G5 with a new iMac, which is now one of my 2 slave machines - and I've also moved everything (except Logic instruments) into Vienna's Ensemble Pro AU/VST host, which is utterly amazing, and solves a lot of problems.
    All in all, you'll have a VERY capable system
    Best,

  • Mac Pro will not restart after installation of Lion.  Help!

    Mac Pro will not restart after installation of Lion.  Help

    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

    Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

    Try this:
    clone your system and repair it with Disk Warrior instead
    Or try a clean test system install on another drive
    A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
    Try to run w/o externals. MyBook included.
    Is that a 7200.11 1TB? they had a lot of issues.
    Run AHT off your OEM DVD.
    2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current.  Hopefully you have a UPS and is 1500VA unit.
    When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
    TimeMachine has its own bad habits, especially with Green drives and some externals.
    Try to rule out everything and then add back one at a time.
    And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old.  Might want ATI 5870 or 5770.

  • Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

    Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
    Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

    Installation Guide
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Apple Boot Camp Support
    Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
    You need Apple drivers. And you then need to add on your own audio driver.
    You can run Assistant at any time to download and save a set of drivers.

  • I just created a slideshow dvd in imovie, and when I hit finalize it said that it would take 7 hours to finalize.  I've only had my macbook pro for 6 months, and this is the first imovie I've done...is this normal?  If not how can I speed up this process?

    I just created a slideshow dvd in imovie, and when I hit finalize it said that it would take 7 hours to finalize.  I've only had my macbook pro for 6 months, and this is the first imovie I've done...is this normal?  If not how can I speed up this process?  Thanks in advance for all of your help!

    Hi
    Time needed can depend on several things.
    • less than 5 GB free space on Start-up (Mac OS) hard disk = Redicolous long times AND a DVD that most probably will not work OK
    Medicine - I never go under 25GB free space
    • Use of strange file formats into iDVD - can force it to de-code first then re-encode - this can take long long times
    I use
    Video - StreamingDV as from miniDV tape Cameras - or QuickTime Movies Converted to StreamingDV
    Audio - .aiff 16-bit 48 kHz - (no .mp3, .wma etc)
    • Use of old Mac - My G4 600MHz took about 24 hour per hour movie. my dG5 - about 2 hours per hour (I use Pro Quality encoding)
    • Pro Quality encoding - takes about x2 to process a movie
    Yours Bengt W

Maybe you are looking for