Had the iPAD 2 over 3 months and it just doesn't seem to be able to do anything
My downloaded a movie from iTunes and even though I know I have a very strong wi fi connection it is saying ti will take over 8100 secs to down load. This is not the first time I have had problems with this. I would think that if something is ordered dirtly form the iStore it would work on the idevice. No flash, no Microsoft, no nothing. I fill cheated out f $700. What purpose does the ipad serve? I can't even use it to log into my onlne classes. I want my money back. I could have gotten a netbook and been at least able to watch my dvds!!!!!
It does work on the device after being downloaded.
And no Microsoft? That is entirely up to Microsoft in regards to providing an Office version for the iPad if that is what you mean, but that doesn't prevent you from viewing Word, Excel, or PowerPoint documents received via email, and there are some 3rd party apps that provide for transferring Office documents from your computer to your iPad via the iTunes sync/transfer process, and some allow for this wirelessly when your computer and iPad are connected to the same wireless network. Apple also has a Pages and Numbers version for the iPad which allows for creating word processing and spreadsheet documents and is compatible with Word and Excel.
If purchased within the last 14 days, you can return it for payment credit. If past 14 days, demand for the iPad remains very high so sell it and use the proceeds to purchase a device that meets your most important needs and wants - doing some research beforehand.
Similar Messages
-
I Recentl. Bought an iPhone and iMessage just doesn't seem to be working. It won't let me send a message to my friends with emails? Or iPods I don't know
Read these:
Using iMessage
http://support.apple.com/kb/HT3529
Troubleshooting iMessage activation:
http://support.apple.com/kb/TS4268 -
I have been able to print from my ipad before, but now I can't. I get an error message saying no printer can be found.
I would unplug router and printer for about 30 seconds. I would also power down iPad. I would confirm that printer was on your network. I would attempt to print again. I would also make sure I was using the correct app Hp ePrint app.
Let me know if this helps -
I just signed up for the export pdf program and it just doesn't work.
I used the program to transfer a pdf file into a document file. The new doc file left out some pictures, overran lines of type, completely misinterpreted caps and lowercase letters, and whole blocks of type overlapped or disappeared. Is there something I'm doing wrong, or does this just not work properly? ...
Hi kathrynb32616732,
You are likely not doing anything wrong. The quality of the conversion depends on the quality of the original PDF file. Please see Will Adobe ExportPDF convert both text and form... | Adobe Community.
Do you know what created that PDF? If it wasn't an Adobe app, the PDF may not be written to spec, and that could account for the conversion issues. You can tell what created the PDF by choosing File > Properties and looking for the PDF Producer on the Description tab.
Sometimes, you can have better luck by turning off OCR as described in this document: How to disable Optical Character Recognition (O... | Adobe Community (but you'll want to keep OCR enabled if your PDF was created from a scanned document).
Best,
Sara -
So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.
A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert -
Had current ipad since March. Recently videos (in photos app) that were able to be viewed are now missing. The commonality is that they were videos that were not uploaded directly to the ipad. Anything that I've uploaded since March is still accounted for. Just strange because I have viewed these videos since using this ipad. Only recently have they been "removed." WIll try to manually load them back, but any thoughts as to why? Thanks
If the videos were not uploaded to the iPad - (and I'm never sure what that means to another user - synced from iTunes?)- and they were taken with the iPad itself, you will have to restore from a backup in order to recover the videos if they are really gone from the device.
If they are purchased videos and they are in your iTunes library, sync them back to the iPad.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766 -
I just upgraded to iTunes 12 and had all sorts of problems. After several restores I seem to be able to sync my iPad with iTunes BUT I can't delete anything off my iPad from iTunes. Any ideas on what to do?
-Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....
-
I just recently purchased the iPad wireless keyboard and I've followed all the steps, but everytime I type in the code to pair it, it says it cannot be paired. I've kept in close range, pushed the connect but it won't connect. What do I do?
AS Tesserax said you must
disconnect your laptop from the existing wifi network
Connect to the default Apple Networkxxxxxxxxx - that is your AEX open network
Go to the Airport Utility and set the AEX router to extend the Existing Network >> in the AirPort Tab > Wireless Tab >> Wireless Mode - choose your Linksys network and enter credentials - your AEX should now join the Linksys network
Then switch back to your original wifi network and your AEX should show in the AirPort utility as well, extending the range of your Linksys network, green light on
PS: Win XP support for WP2 authentication downright *****. Even with SP3, get ready for some "cannot connect" warnings. My Dell laptop from work would have major issues connecting to my home's AirPort WPA2. I had to downgrade to WPA at some point. -
hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?
If you tried to restore to your iCloud backup and your photos didn't fully restore, first go to Settings>iCloud>Storage & Backup and make sure it isn't still in the process of restoring.
If the restore is complete and all your photos weren't restored, all you can do is try restoring the backup again. You might try the solution posted by ezjules in this discussion: https://discussions.apple.com/message/19518589#19518589. This involves opening the photos app after the phone restarts and you provide the passwords for your Apple IDs, then leaving it open for the remainder of the restore process. -
I upgraded my iPad 2 (3G) to the new OS8 and I can no longer connect to 3G. All the settings on the iPad are correct. It just shows that it's searching for a signal. I'm in an area where my signal (pre OS8) was very good in strength. Please help!
Hello Jpahlphoto!
I'm sorry to learn about the issues mentioned in your post. Let's fix this for you OK?
Please restore your iPad and see if that does the trick. You'll find the steps here:
http://bit.ly/16hQAlr
Thanks,
ChristinaB_VZW
Follow us on Twitter @VZWSupport -
I just bought the new HDMI cord for the IPad, it works good but a small potion of the TOP and the BOTTOM is cut off. It doesn't seem to do it for movies(although I can't really tell. My monitor is a 23 IN' acer s series. I just installed the drivers for my monitor with no change. I think I have a CD somewhere for my monitor maybe it has some kind of program in there that can help me. I can post a picture if I need to. Thanks
No work around that I know of.
Apple Feedback http://www.apple.com/feedback/ -
I ripped a new CD to iTunes and backed up to the cloud. The songs are already on my iPhone 4S, but I can't get them on my iPad. I already connected the iPad to my laptop and selected "Sync with the iPad over Wi-Fi". On the iPad I forced a Sync. Help!
Try deleting and redownloading by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
HT4623 How do I get the calendar to show the whole month and not just the day or week.
How do I get the calendar on my updated i phone 7 to show the whole month and not just the week or the day?
Touch the arrow (or word) at upper left (e.g. September).
-
I had my ipad restored today and cant locate a book I purchased in IBooks. is there a way to locate this book ithout purchasing it again
As long as the book is still in the store, and you haven't changed countries since buying it, then it should show in the Purchased tab in the iBooks app on your iPad for redownloading. If it's still in the store but doesn't show in Purchased then check to see if it's hidden : iTunes Store: Hiding and unhiding purchases.
-
My Macbook air flash had gone for a month and I saw Apple's Macbook air flash storage drive replacement program. I'm not sure whether that program is still available for the broken device or not. Now, I'm booting from the external hard drive. Warranty has gone in October 2013..
I want to send back my macbook air back to apple store. The problem is that I bought it from US and now, I'm using it in Myanmar. If the program is free of charge for my device, it's worth trying to send back to US. Since mine is broken, I'm afraid Apple will take charges for reparing.
So, if anyone having the same problem as me, I would like to get suggestion....
Thank you!!I have no idea about how to handle the international aspect of your question.
But here is the Apple writeup about the problem and the remedy. Maybe that will help you.
http://www.apple.com/support/macbookair-flashdrive/
Maybe you are looking for
-
GR/IR clearing when there is difference in value and quantity is matching
Dear friends, I'm having a problem to clear the GR / IR account where there is a value difference in dr and cr line items. when ther is foreign currency postings some of the dr or cr line items are having value difference in decimals. I checked the t
-
Getting error when creating a RFQ in MM module" create rfq item overview"
Hi, i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. This error i am getting when creating a RFQ in MM module and when trying to save the screen "create rfq
-
What happened to International Unlimited Data Plan for $64.99?
I am confused about international data plans, I get that the $64.99 unlimited international data plan is probably gone even if you were able to grandfather in the unlimited $29.99 data plan currently. I understand that Canada, Mexico, Caribbean, and
-
Header Pricing Condition (SD)
Hello, We have a header pricing condition type both applicable to header and line items. When manually putting an amount on the header, it automatically distributes the amount on the line items proportionally. When running in batch or IDoc via requir
-
Hi, I need to know How can I reference the current location of the write cursor in a jTextBox or jTextArea so that I can for example select the two chars that are before the cursor, or insert some words in the place the cursor is located... Any help?