Had to down grade from OS 10.4.7 to 10.4.6

Had to down grade from OS 10.4.7 to 10.4.6 so AVID will work, don't hold that against me. Now compressor 2.0.1 is not opening. Also grayed out in Final Cut Pro. How do I get Compressor to work again?

Hey Big, i love avid's, especially our perty DS NITIRS they have here at work.
ok, sounds like your "problem" is no big deal at all. i would just uninstall compressor and ALL her components and do a fresh reinstall.
also, make sure you have all the pro updates (i see you installed them once already, so unistall those as well) and you should be fine. might be just a slight conflict with your new avid install.
let us know
Mikey M.

Similar Messages

  • How do I down grade from iOS8 to iOS7 on a Iphone 4s?

    How do I down grade from iOS8 to iOS7 on an iPhone 4S?

    You don't. Apple does not support downgrading.

  • How do I down grade from iOS 7

    How do I down grade from iOS 7?
    the new ios 7 isnt as good as 6 and as a custerm would like to go back to ios6 as soon as possible.
    the phone is become too slow to use.
    other bugs seem to freeze the phone
    the graphics are poor and not in the normal competant apple style.

    I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
    You may leave comments at Apple Feedback.

  • Down grade from 10.7.5 to 10.6 because of final cut 5.1 and the up grade to FC6

    down grade from 10.7.5 to 10.6 because of final cut 5.1 and the up grade to FC6

    Downgrade Lion/Mountain Lion to Snow Leopard
      1. Boot from your Snow Leopard Installer Disc. After the installer
          loads select your language and click on the Continue
          button. When the menu bar appears select Disk Utility from the
          Utilities menu.
      2. After DU loads select your hard drive (this is the entry with the
          mfgr.'s ID and size) from the left side list. Note the SMART status
          of the drive in DU's status area.  If it does not say "Verified" then
          the drive is failing or has failed and will need replacing.  SMART
          info will not be reported  on external drives. Otherwise, click on
          the Partition tab in the DU main window.
      3. Under the Volume Scheme heading set the number of partitions
          from the drop down menu to one. Set the format type to Mac OS
          Extended (Journaled.) Click on the Options button, set the
          partition scheme to GUID then click on the OK button. Click on
          the Partition button and wait until the process has completed.
      4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

  • How to down grade from ios 8 to ios 7 in iphone 4s

    Please help me, How to down grade from ios8 to ios7 in  my iphone 4s, because my iphone 4s becomes very slow aftyer upgraded to ios8

    There are several Apps in the store than can create and edit Word documents and only require iOS 5.
    One example:
    https://itunes.apple.com/us/app/document-writer-word-processor/id595073719?mt=8

  • How do I down-grade from Aperture 3 to Aperture 2?

    With great gusto I installed Aperture 3 on release. I now have an unusable piece of junk instead of a photo app. I've tried to get work done with it, I just can't. It simply isn't usable.
    I need to down-grade, but I'm worried that just copying back my library and my old program files won't be enough. for a start, Software update installed an extra package for Aperture 3 - so what will happen if I try to use Aperture 2 when that's still installed? Or can I un-install that update?
    Any guidance would be much appreciated. I can't be the only person trying to turn back time on this dud update!
    Bart.

    Hi Bart.
    I am sorry you are having problems. Until a few days ago I felt similarly to you but, having contacted Apple Aperture Support and implemented their suggestions, I have had no further lock ups or crashes.
    Some background:-
    I have been using Aperture since 1.5 & I have used Lightroom since Beta 1. Because I rely on these apps. heavily and because Adobe and Apple appeared to be leap frogging each other with better and better features as each app. matures, I have run BOTH apps. side by side since the early days. A bit of an over kill perhaps but that`s what I do.
    Now, Aperture 2 was a huge upgrade from 1.5 and superior to the currrent LR version. When LR 2.0 was released I foolishly purchased and installed. Well, this version was appalling; local adjustments were almost unusable but I was also experiencing other issues. I contacted Adobe LR support and found them arrogant and rude at the extreme!! I wrote to the head honcho in an extremely strongly worded letter and demanded a refund as the software was not fit for purpose. Very quickly I received a reply with a series of helpful suggestions. Those I duly implemented and LR 2.0 worked reasonably well BUT, the local adjustments were still a sack of C**P! I returned LR 2.0 to the background and used AP 2.0 in my primary workflow. LR was upgraded, local adj. became useable, quite good actually and I then implemented LR into my primary workflow. Aperture was becoming a bit long in the tooth by now with lots or rumours about it`s demise. Well eventually AP 3.0 was released! I downloaded and started to use it with some newly imported images, leaving my AP 2.0 library alone and VERY well backed up (obviously). I experienced a shed load of problems - crashing, lock ups and other weird things! I had no problems with any other App.
    I decided to ring Apple Aperture Support. The difference between Apple Support and Adobe Support was like chalk & cheese! Apple were punctual, pleasant, efficient whereas Adobe were just plain slow and arrogant (mostly).
    The guy from Apple asked me loads of questions about my system, workflow etc and we spent about 30 mins chatting. He suggested a plan that I invoked as he talked through this on the line.
    Now, I know you are a computer scientist and I am NOT but I do know my way around the Mac quite well and i am a professional photographer with not a little experience. To that end I can only explain to yoou what I did and the effects.
    1. We created a Guest account and ran Ap. clean. New library and new imports - worked well.
    2. Logged in to my account, deleted the Aperture plist, deleted the library and re-imported a small number of images.
    3. To date I have had NO crashes or lovc ups, in fact Ap 3.0 is working beautifully if not a little
    resource hungry! I Have FACES switched OFF).
    4. It was also suggested that I reinstall the app. but I have not found that necessary.
    5. Support also suggested that as it is "early days" with 3.0 users are better placed to install and use initially with a new library BEFORE importing AP 2.0 libs.
    6. Images I process in Aperture 3.0 using NIkon D700 & D3 look fantastic and I am very happy with the results.
    7. I have used virtually every aspect of Ap. 3.0 and have not had any problems with Export to Mobile Me, Places, Slideshow etc.
    8. There is no doubt that AP 3.0 is resource hungry. I have the Activity Monitor open when using Ap. and at times both Memory & CPU resources appear to be very "stretched".
    As I say I am not a super geek but I do know Aperture (and Lightroom) and cannot explain fully why I no longer have any problems? I do know however that Ap. is working beautifully and I will almost certainly be using this in my main workflow whilst continuing to use LR in the background.
    There is no doubt that this upgrade was immense and if Apple continue to evolve this app. quickly AND update RAW support in a timely fashion I will probably use it.
    MY Hardware:-
    iMac 24" - 2.4 GHZ Intel Core Duo 4GB Ram ATI RadeonHD2600
    I hope this of interest and also hope that if anyone is experiencing any problems with AP. 3.0 that they are resolved in a timely fashion.
    Hope your AP 2.0 Library was backed up - you are a computer scientist after all (:-
    Regards.
    Nick

  • Can i down grade from my Smart Phone to a basic?

    I find that i realy don't use my data much and have taken it all the way down to 1G. I am on the Share Everything Plan and have a little less than a year to go on my contract.Is there any way to get rid of the data and down grade?

    Good pint Ann154..I guess I should've asked this first... Deano67, do you have any other lines on your account? And how long have you been with Verizon Wireless? I ask this because you may have access to a Nationwide plan where you could get rid of data altogether for the line (with a basic phone) but the cost effectiveness would depend on your usage and if there are other lines on the account.
    And yes, as long as you have only one or no smartphones on the account then you can go down from 1gb to 300mb for $10 less a month. 

  • HT201401 Can I down grade from ios6 as since upgrading phone is slow and unresponsive. This is driving me crazy. This page took ages to load on a wireless connection.

    Since upgrading to iso6 phone is slow and unresponsive. Can I reset and down grade? I'm a complete technophobic and have no idea how to do this. Any help would be fab!

    There is no legit way at all to downgrade.
    Have you tried basics from the manual to help your issue?
    Restart, reset, restore

  • How to down grade from ios 6 ?

    I'm want to down grade
    Sorry apple if i'm harsh

    Thanks, How about the Google Maps?
    The first think I tried after updating iOs 6 was Siri, well, it is not there for iPad 2, next was maps and it just doesn't work for Indian cities. Thenit was You tube. it just disappeared. So finally I closed the lid and came back to office.
    "200+" features, but of what use? Most of them available on iPad3 or other devices only.
    iPad 2 is not that old to be left out of all main features.
    Maps, Siri are dependent upon country, even iTunes.

  • Help!! Down grade from 64 bit Vista to XP Pro x64 Edition

    I am in need of down grading because of driver issues for this equipment that I've purchased and it will not currently run on 64 bit Vista.  Can someone give me the simplest step by step way to make this happen?  I am not knowledgeable in this area so please keep it as ABC as posssible for me. 
    I have the HP Pavilion dv4 Notebook PC
    AMD Turion X2 Dual-Core Mobile RM-72 2.10 Ghz
    4.00 GB
    64 Bit Operating System
    Windows Vista Home PremiumService Pack 1
    This question was solved.
    View Solution.

    Hi,
    This is a guide for XP 32 bit version. I think then after this what Huffer wrote You will want to try this system.
    First make Vista backup. Here You've got all informations how to do it.
    You have a folder with drivers & programs that may prove very helpful after XP downgrade. Copy folder C:\Swsetup to DVD Before formatting your hdd.
    Now You need to slipstream Your Sata drivers win nLite.
    Here is guide how to do it and here are AMD SATA AHCI Controller for You. Just unrar this drivers with winrar.
    Be sure also that You are using WinXP SP2 version. If you haven't got SP2 version here you can download this service pack
    and here You have got guide how to slipstream this file with Your system again by nLite.
    In this program You can even burn Your new XP cd with this driver.
    Drivers for Your model:
    First You must install .Net Framework  here (You need it for Catalyst software and  HP Quick Launch Buttons)
    How to install HD 3200 Graphics/Video for XP
    For this video graphic, ATI do NOT release XP drivers due to some agreement with HP that backed by Microsoft.
    However, you may utilize Mobility Modder by driverheaven.net.
    Download these files
    1. Download MSXML 6.0 from Microsoft, here
    download msxml6_x86.msi --> 1.5MB
    2. Download Mobility Modder, here
    Do the following steps
    1. Please make sure you had install .Net Framework,
    2. Download newest desktop drivers, here
        Run Catalyst Software Suite but cancel the installation once the driver is extracted.
    3. Run Mobility Modder, browse to the driver in C:ATI/SUPPORT/xxxxx/ --> hit modify. Wait until driver is modified.
    4. Wait until Install is finished and reboot
    Further detail can be found in here
    MS-UAA for SP2 (required with a reboot before Audio, Modem and ATI HDMI Audio) here
    MS-UAA for SP3 (required with a reboot before Audio, Modem and ATI HDMI Audio) here
    Please check first this link written by Joshua Wood and concentrate in it on problems that may appear when You will be installing sound card. I know then this is guide for dv5 but many hardware and drivers are the same for both models.
    IDT High-Definition Audio CODEC Driver,
    1. sp41698, vista driver, reported work in XP here
    2. sp41693, vista driver, reported work in XP here
    3. sp39671, vista driver, reported works in XP here or here
    4. Find Your Vista audio driver on this DVD where You burned C:\Swsetup folder. It may also work under XP.
    When You will install any audio driver with success check is Your sound working.
    If there will be no sound after restart check this thread. There are informations how to solve this.
    High-Definition Audio (HDA) Modem Installer and Driver here
    ATI HDMI Audio here
    HP Quick Launch Buttons here
    Broadcom Wireless here
    Realtek RTL8102E Family PCI-E Fast Ethernet here
    ALPS Touchpad here
    JMB38X Card Reader  here
    ENE CIR Receiver (your Vista driver) here or from Intel here
    If you had for 7 unknown devices (buttons drivers), here (New link)
    Do manual installation
    Go to device manager, right click unknown device,
    Choose to update driver, No to connect,
    Choose install from a list or specific location, Don't search, Have disk,
    Browse to the location of machine.inf.
    Do it for the rest of unknown devices.
    Message Edited by Daniel_Potyrala on 09-12-2009 03:51 PM
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • How can I down grade from OS 10.6.8 to 10.6.4?

    I want to reset the DVD Drive to RPC-1 by flashing the Firmware.  The program will only work on OS 10.6.4 or earlier.  I have 10.6.8.  13" macbook pro.
    thanks,
    don

    vytran wrote:
    Uhm i have a macbook air and i updated to 10.6.8 after that i want to renew my macbook so i install the computer with the DVD 10.6.4 OS and the computer said that the DVD cannot be install to this computer. WHAT should i do?? how do i downgrade from 10.6.8 to 10.6.4?
    You need the origianl method (or a new copy of it) and then hold the option key down to boot from it.
    Then erase the drive in disk utility first,, then install 10.6.earler on it, the don't Software update as it will download the 10.6.8 Combo Update.
    Naturally erasing the drive will remove all programs and files, but that's the only way to downgrade OS X to a earlier version.

  • How to uninstall and down grade from fire fox 5 to fire fox 4

    up dated to fire fox 5 but upset that awesome screen shot for fire fox does not work with fire fox 5 i hate fire fox 5 for that and want fire fox 4.0 or 4.1 back please I uninstalled fire fox even and tried to reinstall 3.6 to go to 40 can you please fix this or I will have no option as to find a different browsers i can use screen shots with.

    Hi Shannon,
    I'm having the exact same problem and I cannot believe your question hasn't been answered yet!
    Also, I expected a lot more people to have this same problem.
    I encountered an entry on the stackoverflow website, was that you?
    Quote:
         " I've flashbuilder 4.6 and I need to uninstall it. It appears to be missing the installation package, and as such it doesn't appear in the control panel->uninstall list for windows 7.  I have filed a case with adobe for help (as its a paid product), but after month & 1/2 no answer. So any suggestions on how to get rid of it including any links it will have to the registry or similar. It must be a clean uninstall as to install the newer version the current one must be removed and the newer version installation knows that I have it (previous version) installed already.
    I have tried the uninstall tool called Revo as well without success.
    Cheers."
    This person answered his/her own question:
    Quote:
    "What I needed to do was to find the exact version of the software I used to install it originally. Then once I ran the installer, (for the already installed software) windows picked up the installation packager and I could uninstall it.
    Once removed I could then install the newer version of the same software."
    I hope this was you and you have found your answer already, but I will try this one and see if it works for me too.  I'm not sure yet
    Help from Adobe on this will be greatly appreciated!!!
    Thanks for your post!

  • I want to down grade from Firefox 9 to 3.6

    Because some add-ons no longer work. Specifically Secrethelper

    Hey miketavener,
    There are a lot of benefits to running the latest version of Firefox. You might want to just wait until the add-ons have been updated. You could also consider using the Nightly Tester add-on that will allow you to force compatibility. Use this add-on AT YOUR OWN RISK.
    If you still want to roll back to a previous version of Firefox, just take a look at the Knowledge Base article [[Installing a previous version of Firefox]].
    Hopefully this helps!

  • Need to Down Grade from 10.6.8 NOW!

    I made the mistake of upgrading to 10.6.8 and need to get back to 10.6.7 so how do I do that? And does that new upgrade have anything to do with why my Time Machine isn't backing up anymore?

    Backup your data to another external drive (not TimeMachine) via drag and drop methods.
    Then hold c and boot off the installer disk that comes with your computer and simply reinstall OS X 10.6 over 10.6.8.
    Don't hook up TimeMachine.
    Resolve your issue and then apply the Combo Update for 10.6.8.
    10.6.8 broke a lot of third party kext's and Parrallels type icons in the Dock.
    Get updates for all your third party software for 10.6.8.
    Use Carbon Copy Cloner and a new blank powered HFS+ Journaled (in Disk Utility) formatted drive (Firewire or  USB) and clone your boot drive and update once in awhile, it's hold option bootable. TimeMachine isn't.
    So if you ever need to "go back" you can erase and reverse clone.

  • How do I down grade from iOS 7? I hate it

    I Want to switch back to my old operating system because iOS 7 *****. I was going to buy an iPhone, but not now. Does anyone know how to switch back?

    Please see item 3 Here  >  Community etiquette

Maybe you are looking for