Had to replace Xserve RAID controller and now I get Xsan Admin: duplicate LUN label RAID1-Left1

after we replace the controller volumes are mounting. Any advice on what to do with the duplicates?

Try reconnecting to the Xsan by closing the window in Xsan Admin, clicking "disconnect", then File -> New -> Connect to existing SAN. If you still see the duplicate LUNs after reconnecting, try shutting everything down and starting back up again in the order provided in this article: http://support.apple.com/kb/HT4027.

Similar Messages

Had to replace Xserve RAID controller and now I get Xsan Admin: ERROR: duplicate LUN label RAID1-Left1

I need some help, I had one of my five Xserve RAID boxes fail. The upper controller card needed to be replaced and so we replaced it. But now only one of my volumes is loading and I am seeing the following error in my Console.
7/18/12 9:23:18.550 AM Xsan Admin: ERROR: duplicate LUN label RAID1-Left1
This raid box holds three LUNs. the left is split into two with one being the metadata / Journal for the main volume and the 2nd being the same for my secondary volume. The right side of this box is the second volume while the remaining 4 RAID boxes are my main volume. Here is the rub, the main volume is using the left1 LUN and the secondary is left2. The left2 is the one that is not working and when I go into the LUN info the WWN number does not match the actual id on the raid box.
HELP!!!!
Thanks,
Kevin Rosenthal

Did you try turning it off and on again? I mean, the full SAN shutdown/startup: http://support.apple.com/kb/HT4027
You're probably seeing "duplicate LUN labels" because the MDC has seen two LUNs with the same label but different serial numbers since it has been online. The serial number (which I think is based off the WWN) would have changed when the RAID controller changed. A reboot should fix that specific error message.
If the volume still doesn't start after rebooting, then you would want to check the cvlog for that volume.

I have purchased Lightroom 5 and had it installed but I had to replace my matchbook pro and now I can't find the activation key - is there a way I can get it emailed to me or how do I find it? Most other plugin's email out the activation key so you have a

I have purchased Lightroom 5 and had it installed but I had to replace my matchbook pro and now I can't find the activation key - is there a way I can get it emailed to me or how do I find it? Most other plugin's email out the activation key so you have a copy but I have seen no way to get it.

If you registered your Lightroom with Adobe after you installed it, you can log into your Adobe account and get your serial number from your account.

I had to replace my hard drive and can't get my Photoshop CS2 9.0.2 to activate. I have tried both the phone and the website and have both the serial number

I had to replace my hard drive and can't get my Photoshop CS2 9.0.2 to activate. I have tried both the phone and the website and have both the serial numbers. I can't find a number that works to speak to a live person at Adobe. I need to reduce the pixel size TODAY on some photos and need the program. Is there another way to reduce pixels if I can't get my Photoshop running today?

Intertech Design wrote:
Where do I get the specially assigned serial number????? I don't want to have to purchase anything since I already bought the CS2 and I don't need a newer version.
Follow the prompts at the link provided by Ned.
Everything's there including your new CS2 non-activation download file and your new non-activation serial number.
It's free for existing owners of CS and CS2. Nothing more to purchase.

I had to replace my cable modem and now my Time Capsule only talks to just the one Mac Air. My other wifi devices (another Mac Air, iPad, and iPhone) can't get on the wifi. Any suggestions?

I recently replaced my cable modem and now my Time Capsule only works with the one Mac Air and not my other devices (another Mac Air, iPad, and iPhone). Any suggestions?

It sounds like you have gone from a cable router with the TC bridged to a cable modem with no router.. so the first device to connect pick up the IP address. Did the cable company give you the same model?? Check if it is a pure modem or a modem router.. and what the last one was.
Anyway.. you should redo the setup.. do you have any computer with ethernet?? Did you buy a USB to ethernet adapter for one of your airs.. very hard to do setup without ethernet.
Also download the new utility.. with the old style.
http://support.apple.com/kb/DL1482
If you happen to be on Lion.
Redo the setup and make sure you setup correctly to router mode if the cable modem has no router or bridge mode if it is a router.

I got my Macbook Pro 17inch (early 2011) back from Apple (they had to replace the logic board) and now my microphone is not working

I got my Macbook Pro 17inch (early 2011) back from Apple (they had to replace the logic board) 3 days ago, I had a terrible experience as the genious who gave me my solid state disk for safekeeping lost my disk's brackets thus I had to wait 2 more hours until they find one after 10 days of waiting for the repair. I noticed some weird sounds, like somehting is moving with the mac 1-2 times, even if I have no mechanical parts other than the fans, but my real issue at the moment is that my microphone is not working. I can see the mic in the System Info however and in Audio Midi Setup. In the Audio Midi Setup I see that the master chanel is turned off and I can't turn in on. Ch 1 and 2 are on full. I also noticed the first seconds after the comp. boots the blue bar goes to the middle in the System Preferences -> Sound -> Input. Any ideas what to do or try? I do not want to go back to the apple store as it is 50 minutes away from here and I need my laptop as a computer science student. Everything else is working perfectly.

You need to call both the store that did the repair and Apple directly, warranty service or Apple care, and report this problem with both of them and get a ticket number of some kind (some kind of verification number) that the unit just came back from major service with this problem and that you want it fixed when you can lose the use of it, which is not right now.
Without doing something like that they could easily say it is damage not covered under the normal warranty.
God knows what the repair center did and did not do to it while it was there.
And depending on when you actually bought it the warranty could run out in the mean time.

Had to replace my hard drive and now I can't update iPhoto.

(Originally posted this question in the MacBook Pro community but it might do better here.)
When I try to through the App Store I get this message: To update this application, sign in to the account you used to purchase it.
I submitted this to the App Store help email (or whatever it's called) and was sent an answer that wasn't helpful at all. I replied to the "if this doesn't work..." but haven't heard back. Anyone else have a solution?
I'm running 10.8.2. So I seem to be up to date. And I have been able to update everything else (such as iTunes yestereday). It's only iPhoto that won't let me update and gives me the above message.

Yes, it is much better to post here for this issue than the other communities.
iTS email I think you are referring to...
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
If their answer wasn't helpful, mind posting it here so I can verify?
Generally, when you have your HD replaced, you are going to run into this problem. However, I am suspecting about all your other apps being alright. As this issue should also effect iMovie and GB as well, thought maybe you are using them.
There is a good chance you'll have to correspond with iTS on this again, and they may eventually grant credits since it's unlikely pulling adoption plists is going to work here.

Help replaced a kext file and now I get a Prohibitory Sign and cant startup

I replaced my iovideo family.kext file trying to fix my non working dvi output. I replaced it with one from my mbp 15 because that one worked fine now I cant start up my mbp17 I get the Prohibitory Sign???

If you kept a copy of the original file, you can use the terminal to copy it back.
You should be able to boot into the Leopard DVD using the "C" on boot and get into the single user mode to do this.
If you have a TM backup, you can boot into the Leopard DVD and restore the entire OS from the backup.

I had to replace my hard drive and when I plug in my iPad, itunes says it is synced with another computer, and asks to erase all my data. Help!

I had to replace my hard drive and now when I plug in my iPad, itunes says it is synced with another library

That is because the iPad can only "sync" to one iTunes library at a time. You can move all of the iPad contents into a new iTunes library. This discussion will give you a lot of useful information.
https://discussions.apple.com/thread/3305461
This one is Mac specific - not that it is any different except for the iTunes menu.
https://discussions.apple.com/thread/3445538?start=0&tstart=0
Remember to authorize the computer in iTunes first - From the iTunes menu go to Store>Authorize this computer.

I had to replace my hard drive, and I don't have access to my sync code to get my bookmarks into my new browser. How do I get my sync code if I don't have the original email containing it?

I had to replace my hard drive and need to get my bookmarks from my sync account, but I don't have access to my sync code. How do I get it or can you send it to me again. It was in my email on my bad hard drive. Thanks.

Intertech Design wrote:
Where do I get the specially assigned serial number????? I don't want to have to purchase anything since I already bought the CS2 and I don't need a newer version.
Follow the prompts at the link provided by Ned.
Everything's there including your new CS2 non-activation download file and your new non-activation serial number.
It's free for existing owners of CS and CS2. Nothing more to purchase.

I had downloaded OS X Mountain Lion and had to replace my hard drive. Now when I try to download it only wants to upgrade since I show that I previously purchased it. What can I do to get the operating system back

I had downloaded OS X Mountain Lion and had to replace my hard drive. Now when I try to download it only wants to upgrade since I show that I previously purchased it. What can I do to get the operating system back

I'm unclear on what the problem is. Have you installed a system on the new hard drive, and if so, what system? Had you actually installed Mountain Lion previously, or only downloaded it? And what does "it only wants to upgrade" mean? Have you actually got Mountain Lion already installed? (See About This Mac in the Apple menu.)
All Macs that shipped with Lion or newer are capable of internet recovery in situations like this. Just hold down command-R and it should start in recovery mode over the internet if necessary. You can reinstall the system from there. If you had Mountain Lion, I would assume that Mountain Lion would be the system you would get reinstalling that way.

HT1473 I recently had to replace my hard drive and lost my iTunes library. Now I cannot transfer the library from my iPod to iTunes on the new hard drive (same computer). How can I complete the transfer?

I recently had to replace my hard drive and lost my iTunes library. When I try to transfer the content from my iPod to iTunes on the new hard drive (same computer), it would only let me transfer iTunes store purchases. How can I complete the transfer of all the content on the iPod back onto the computer?

Recover media from iPod
See this post for options on moving your iPod data back to your computer.
tt2

I had iPhoto on my Macbook when I bought it, but I had to replace my hard drive, reloaded now Leopard and now don't have iPhoto. How can I get it without having to pay for it again?

I had to replace my hard drive and load Snow Leopard, but iPhoto is not there. How can I get iPhoto without having to pay for it.

The iLife that came with your MacBook is on the #2 gray disk that came with the MacBook.
The App Store version of iLife ‘11 programs will only work with 10.7 or 10.8. You can get the iLife ’11 DVD which will run on 10.6 on eBay or Amazon.com fairly cheap.
http://www.ebay.com/sch/i.html?_odkw=apple+ilife+11&LH_Auction=1&LH_BIN=1&_sop=1 2&_osacat=0&_from=R40&_trkparms=72%253A1234%257C66%253A2%257C65%253A12%257C39%25 3A1&LH_PrefLoc=1&_sc=1&_trksid=p2045573.m570.l2632.R2&_nkw=apple+ilife+11&_sacat =18793
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?s=so ftware&ie=UTF8&qid=1376932206&sr=1-1&keywords=ilife+%2711

My logic board was replaced on my Mac and now my CS4 will not open. I re-downloaded it, gave the serial number, but it still won't open. Now what?

My logic board was replaced on my Mac and now my CS4 will not open. I re-downloaded it, gave the serial number, but it still won't open. It said that the licensing had expired. But this is not the case. Now what?

uninstall, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then properly install (do not migrate, use timemachine etc) using the installation files.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

HT203167 Had to replace my hard drive. Now I can't get into i-tunes to enjoy my list (about 98 songs). Is my music stored in my old hsrd drive? Sorry guys I'm not real good with this comp. stuff. Just want my music back

Had to replace my hard drive. Now I can't get into i-tunes to enjoy or purchase new music.Are my i-tunes stored in my old hard drive ? Do I have to take my old hard drive to a computer store and have them placed on something called a flash drive ? I'm having the same trouble retrieving my Ancestry.com infor.

Yes, all you iTunes data are on the old drive. Get an external enclosure in which you may install the old drive in order to connect it to your computer and copy your iTunes data to your new drive.
Everything is on your old drive unless you copied it to the new drive.

Had to replace Xserve RAID controller and now I get Xsan Admin: duplicate LUN label RAID1-Left1

Similar Messages

Maybe you are looking for