Had to replace Xserve RAID controller and now I get Xsan Admin: ERROR: duplicate LUN label RAID1-Left1

I need some help, I had one of my five Xserve RAID boxes fail. The upper controller card needed to be replaced and so we replaced it. But now only one of my volumes is loading and I am seeing the following error in my Console.
7/18/12 9:23:18.550 AM Xsan Admin: ERROR: duplicate LUN label RAID1-Left1
This raid box holds three LUNs. the left is split into two with one being the metadata / Journal for the main volume and the 2nd being the same for my secondary volume. The right side of this box is the second volume while the remaining 4 RAID boxes are my main volume. Here is the rub, the main volume is using the left1 LUN and the secondary is left2. The left2 is the one that is not working and when I go into the LUN info the WWN number does not match the actual id on the raid box.
HELP!!!!
Thanks,
Kevin Rosenthal

Did you try turning it off and on again? I mean, the full SAN shutdown/startup: http://support.apple.com/kb/HT4027
You're probably seeing "duplicate LUN labels" because the MDC has seen two LUNs with the same label but different serial numbers since it has been online. The serial number (which I think is based off the WWN) would have changed when the RAID controller changed. A reboot should fix that specific error message.
If the volume still doesn't start after rebooting, then you would want to check the cvlog for that volume.

Similar Messages

Had to replace Xserve RAID controller and now I get Xsan Admin: duplicate LUN label RAID1-Left1

after we replace the controller volumes are mounting. Any advice on what to do with the duplicates?

Try reconnecting to the Xsan by closing the window in Xsan Admin, clicking "disconnect", then File -> New -> Connect to existing SAN. If you still see the duplicate LUNs after reconnecting, try shutting everything down and starting back up again in the order provided in this article: http://support.apple.com/kb/HT4027.

I have purchased Lightroom 5 and had it installed but I had to replace my matchbook pro and now I can't find the activation key - is there a way I can get it emailed to me or how do I find it? Most other plugin's email out the activation key so you have a

I have purchased Lightroom 5 and had it installed but I had to replace my matchbook pro and now I can't find the activation key - is there a way I can get it emailed to me or how do I find it? Most other plugin's email out the activation key so you have a copy but I have seen no way to get it.

If you registered your Lightroom with Adobe after you installed it, you can log into your Adobe account and get your serial number from your account.

I had to replace my hard drive and can't get my Photoshop CS2 9.0.2 to activate. I have tried both the phone and the website and have both the serial number

I had to replace my hard drive and can't get my Photoshop CS2 9.0.2 to activate. I have tried both the phone and the website and have both the serial numbers. I can't find a number that works to speak to a live person at Adobe. I need to reduce the pixel size TODAY on some photos and need the program. Is there another way to reduce pixels if I can't get my Photoshop running today?

Intertech Design wrote:
Where do I get the specially assigned serial number????? I don't want to have to purchase anything since I already bought the CS2 and I don't need a newer version.
Follow the prompts at the link provided by Ned.
Everything's there including your new CS2 non-activation download file and your new non-activation serial number.
It's free for existing owners of CS and CS2. Nothing more to purchase.

I upgraded my iphone 5 to iOS 8 and now i get an itunes error message when I try to sync "this iphone cannot be synced. Unknown error.

I upgraded my iphone 5 to iOS 8 and now i get an itunes error message when I try to sync "this iphone cannot be synced. Unknown error. (-50). my icloud drive was stuck in an upgrade cycle, but i've stopped that and still get the error message.

I restarted itunes and tried again (based on a similar question/solution from 2012).
I don't get the error message anymore, but it's really sort of odd that after step one of sync, it looks as if sync stopped, and then all of a sudden you see step 4 of sync.
Also before the upgrade I had 7+ gigs of space free and after the upgrade I have 10 gigs free. seems like something is amiss, but it's not like I have anyway of determining that.

I'm new to the Mac world. I installed my Epson printer on my IMAC and it worked fine. Then I installed Windows7 through Bootcamp and I think it reconfigured a port and now I get a communication error and it won't print. Any help on how do to fix this?

Sorry, I'm new to the Mac world. I recently got a new IMAC and installed my Epson CX5800F printer and it worked fine. Then a few weeks later I installed Windows7 through Bootcamp and I think it reconfigured a port or something and now I get a communication error and it won't print. Can anyone help me with this problem, and/or help me get the port back the way it was? Thanks, Barry

While looking through profile first aid, I came across this that might help explain my problem.
Searching for profiles...
Checking 20 profiles...
/Library/Printers/EPSON/InkjetPrinter2/ICCProfiles/Standard.profiles/Contents/Re sources/Epson IJ Printer.icc
   Tag 'desc': Tag size is not correct.
   Tag 'dmdd': Tag size is not correct.
   Tag 'desc': Description tag has a bad Macintosh string.
   Tag 'dmdd': Description tag has a bad Macintosh string.
   The file is locked. Could not be fixed.
Repair done - 0 out of 1 profiles fixed.

HT1212 my iphone is locked in iphone recovery mode after I restored it and now I get an unknown error (3004)

my iphone is locked in iphone recovery mode after I restored it and now I get an unknown error (3004)

http://support.apple.com/kb/TS3694#communication

ADE won't let me read DRM books - 4.0 crashes when opening library books (EVERY. SINGLE. TIME) so I installed 3.0 and now I get an "activation error". I have it authorized to my ID....WHERE IS THE STAFF TO ANSWER QUESTIONS?!?!?!?!?!?!?!?!?!?!?!?!?!!?!?

Working on a MAC with a Kobo. ADE won't let me read DRM books - 4.0 crashes when opening library books (EVERY. SINGLE. TIME) so I installed 3.0 and now I get an "activation error". I have it authorized to my ID....WHERE IS THE STAFF TO ANSWER QUESTIONS?!?!?!?!?!?!?!?!?!?!?!?!?!!?!? I have wasted hours on this and I'm getting really annoyed.

Thank you! This worked. But now I copied my files back, which was successful. But the last file did´t work. I even loaded this file from the bookstore. When I try to load this file, ADE crashes and gives me the following report:
Process:               Adobe Digital Editions [1042]
Path:                  /Applications/Adobe Digital Editions 4.0.app/Contents/MacOS/Adobe Digital Editions
Identifier:            com.adobe.adobedigitaleditions.app
Version:               4.0.3 (1)
Code Type:             X86-64 (Native)
Parent Process:        ??? [1]
Responsible:           Adobe Digital Editions [1042]
User ID:               501
Date/Time:             2015-03-17 17:24:50.622 +0100
OS Version:            Mac OS X 10.10.2 (14C1510)
Report Version:        11
Anonymous UUID:        39575296-9512-7D9E-6037-5A7F3189509D
Time Awake Since Boot: 3000 seconds
Crashed Thread:        0 Dispatch queue: com.apple.main-thread
Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000000000020
VM Regions Near 0x20:
-->
    __TEXT                 000000010fa2d000-0000000110299000 [ 8624K] r-x/rwx SM=COW /Applications/Adobe Digital Editions 4.0.app/Contents/MacOS/Adobe Digital Editions
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.adobe.adobedigitaleditions.app 0x000000010ff7ff1f uft::Value::inlineSet(uft::Value const&) + 7
1   com.adobe.adobedigitaleditions.app 0x000000010ff74e54 uft::Value::operator=(uft::Value const&) + 14
2   com.adobe.adobedigitaleditions.app 0x000000010fbcbdbc css::StyleHandler::verifyXMLStylesheetTree(mdom::Node const&) + 300
3   com.adobe.adobedigitaleditions.app 0x000000010fbc868d css::StyleHandler::processXMLStylesheet(uft::URL const&, mdom::Node const&, uft::String const&) + 227
4   com.adobe.adobedigitaleditions.app 0x000000010fbc8586 css::StyleHandler::resourceDownloadComplete(mdom::Node const&, uft::String const&, uft::URL const&, uft::String const&) + 142
5   com.adobe.adobedigitaleditions.app 0x000000010fcef047 pxf::ResourceStreamReceiver::bytesReady(unsigned long, dp::Data const&, bool) + 207
6   com.adobe.adobedigitaleditions.app 0x000000010fcc84cf rmsdk::zip::ZLibDecompressorStream::bytesReady(unsigned long, dp::Data const&, bool) + 683
7   com.adobe.adobedigitaleditions.app 0x000000010fca66b0 package::AESZipDecryptor::bytesReady(unsigned long, dp::Data const&, bool) + 576
8   com.adobe.adobedigitaleditions.app 0x000000010fcc71e6 rmsdk::zip::ZipEntryStream::bytesReady(unsigned long, dp::Data const&, bool) + 34
9   com.adobe.adobedigitaleditions.app 0x000000010fcc7151 rmsdk::zip::Entry::bytesReady(unsigned long, dp::Data const&, bool) + 235

I had to replace my cable modem and now my Time Capsule only talks to just the one Mac Air. My other wifi devices (another Mac Air, iPad, and iPhone) can't get on the wifi. Any suggestions?

I recently replaced my cable modem and now my Time Capsule only works with the one Mac Air and not my other devices (another Mac Air, iPad, and iPhone). Any suggestions?

It sounds like you have gone from a cable router with the TC bridged to a cable modem with no router.. so the first device to connect pick up the IP address. Did the cable company give you the same model?? Check if it is a pure modem or a modem router.. and what the last one was.
Anyway.. you should redo the setup.. do you have any computer with ethernet?? Did you buy a USB to ethernet adapter for one of your airs.. very hard to do setup without ethernet.
Also download the new utility.. with the old style.
http://support.apple.com/kb/DL1482
If you happen to be on Lion.
Redo the setup and make sure you setup correctly to router mode if the cable modem has no router or bridge mode if it is a router.

I just agreed to a update of iTunes and now I get a "language" error when trying to open it.

I just agreed to an update of iTunes on my imac (running OS-X 10.8.4) and now I get an error when trying to open iTunes. The error is: "This version of iTunes has not been correctly localized for this language. Please run the English version." What?
I'm not a tecchie and could really use some step-by-step instructions on how to get my Itunes working again! I've never changed the language on my Mac...have no idea where this language error came from.
Thanks!

Hello E1777,
You can try this link to download iTunes from the Apple website. It should resolve the issue for you.
iTunes 11.0.4
http://support.apple.com/kb/dl1614
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I got my Macbook Pro 17inch (early 2011) back from Apple (they had to replace the logic board) and now my microphone is not working

I got my Macbook Pro 17inch (early 2011) back from Apple (they had to replace the logic board) 3 days ago, I had a terrible experience as the genious who gave me my solid state disk for safekeeping lost my disk's brackets thus I had to wait 2 more hours until they find one after 10 days of waiting for the repair. I noticed some weird sounds, like somehting is moving with the mac 1-2 times, even if I have no mechanical parts other than the fans, but my real issue at the moment is that my microphone is not working. I can see the mic in the System Info however and in Audio Midi Setup. In the Audio Midi Setup I see that the master chanel is turned off and I can't turn in on. Ch 1 and 2 are on full. I also noticed the first seconds after the comp. boots the blue bar goes to the middle in the System Preferences -> Sound -> Input. Any ideas what to do or try? I do not want to go back to the apple store as it is 50 minutes away from here and I need my laptop as a computer science student. Everything else is working perfectly.

You need to call both the store that did the repair and Apple directly, warranty service or Apple care, and report this problem with both of them and get a ticket number of some kind (some kind of verification number) that the unit just came back from major service with this problem and that you want it fixed when you can lose the use of it, which is not right now.
Without doing something like that they could easily say it is damage not covered under the normal warranty.
God knows what the repair center did and did not do to it while it was there.
And depending on when you actually bought it the warranty could run out in the mean time.

Updated to Firefox 35 and now I get a Javascript error message

My Firefox updated to version 35 and now on every page I go I get this javascript error message: : 'navigator' getter called on an object that does not implement window interface. I'm not sure what is the source of the error. I have not installed any new extensions. I'm attaching an image so you can see the error message.

Please report this to that add-ons support page.

Had to replace my hard drive and now I can't update iPhoto.

(Originally posted this question in the MacBook Pro community but it might do better here.)
When I try to through the App Store I get this message: To update this application, sign in to the account you used to purchase it.
I submitted this to the App Store help email (or whatever it's called) and was sent an answer that wasn't helpful at all. I replied to the "if this doesn't work..." but haven't heard back. Anyone else have a solution?
I'm running 10.8.2. So I seem to be up to date. And I have been able to update everything else (such as iTunes yestereday). It's only iPhoto that won't let me update and gives me the above message.

Yes, it is much better to post here for this issue than the other communities.
iTS email I think you are referring to...
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
If their answer wasn't helpful, mind posting it here so I can verify?
Generally, when you have your HD replaced, you are going to run into this problem. However, I am suspecting about all your other apps being alright. As this issue should also effect iMovie and GB as well, thought maybe you are using them.
There is a good chance you'll have to correspond with iTS on this again, and they may eventually grant credits since it's unlikely pulling adoption plists is going to work here.

Help replaced a kext file and now I get a Prohibitory Sign and cant startup

I replaced my iovideo family.kext file trying to fix my non working dvi output. I replaced it with one from my mbp 15 because that one worked fine now I cant start up my mbp17 I get the Prohibitory Sign???

If you kept a copy of the original file, you can use the terminal to copy it back.
You should be able to boot into the Leopard DVD using the "C" on boot and get into the single user mode to do this.
If you have a TM backup, you can boot into the Leopard DVD and restore the entire OS from the backup.

I updated Firefox, restarted and now I get the following error message when I try to reopen Firefox. "The procedure entry sqlite3_stmt_readonly could not be located in the dynamic link library mozsqlite3.dll".

I just updated Firefox and restarted.

Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Had to replace Xserve RAID controller and now I get Xsan Admin: ERROR: duplicate LUN label RAID1-Left1

Similar Messages

Maybe you are looking for