Had update issues but now my iphone is in a loop of the apple sign then the circling thing, itunes doesnt even pick it up, cant get past this point!! ? any help?
had update issues but now my iphone is in a loop of the apple sign then the circling thing, itunes doesnt even pick it up, cant get past this point!! ? any help?
You might want to check this thread https://discussions.apple.com/thread/3374367 hope this helps
Similar Messages
-
while updating iphone, itune gave me error of 1015 which tells that my iphone is much better than from which that i am updating. But now my iphone is still in restoring mode how i can resolve this problem.please tell me
I just had the same problem with my iphone, only thing i could do was completely restore factory settings, lost a bunch of pics and contacts in the process... hope you have better luck than me
-
I did an automatic update to my daughter's iphone and it did not complete the update from version 6.0 to I believe 8. I waited for hours but the line stopped at 70%. I tried to restore my old settings but now my iphone will not start. When I try to start the
phone, I see the apple and a white line that never moves past 15%.Hi JG14usa,
Welcome to the Apple Support Communities!
I understand that you attempted an update on your daughter’s iPhone but the update will not complete. For this type of situation, it may be necessary to place your iPhone into recovery mode and restore. Please use the instructions located in the attached article to complete this process.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe -
When I got my Ipod Touch 3 years ago, my mum set up an Apple ID in her name & email address. I have since got an Ipad & set up my own Apple ID. How can I update my Ipod to my Apple ID? I would like to sync the Ipad and Ipod, but cant get past this ID problem?
Hi AnnieAnneok,
Welcome to the Support Communities!
The articles below may be able to help you with this.
Click on the links to see more details and screenshots.
First, I would suggest you backup your iPod touch and transfer purchases to your computer:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Confirm your Apple ID is set up and updated with the correct information:
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Then, in Settings on your iPod touch, sign out of your iCloud Account and your iTunes Store account and sign back in with the correct Apple ID.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Cheers,
Judy -
i pressed update on my iphone4 and now the apple icon just comes on and off every 10 secs and i cant turn on my phone. please help me..
Hello dagobertofromelsalvador,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Best of luck,
Mario -
I bought my 6 plus last night decided to upgrade the IOS 8 like they suggest and now all I see is a white screen with the apple sign in the middle with an occasional flashing red screen. Did my new phone seriously just crash? What do I do now? I left it overnight with the white screen, thinking maybe it'll go away and needs time to upgrade. Woke up this morning, nope still white screen. Very disappointed with Apple. I was so excited to get my phone and can't even use it right now.
First turn the iPhone off and back on and see if it works. If that doesn't work then do a Reset by holding the Sleep / Wake Button (The Power Button) and the Home Button at the same time until the white Apple Logo appears, the release both Buttons and wait until a Full Reset occurs. The iPhone 6 should come back to your Lock-Screen. If that doesn't work then you could connect the iPhone 6 via the Lightning Cable to a Computer with a Current Version of iTunes. Then open iTunes on the Computer and wait until your see a Button that represents your attached iPhone and click on it. This should bring up a Summary Screen on the Computer within iTunes. At that point your can choose Update Software if an Update is available or Restore the iPhone to Factory Settings / New In The Box, or you could try to Restore from your Backup if a current Backup had already been saved from a previous iPhone.
If you don't have a computer with iTunes and you can get the iPhone back on, then go to Settings>General>Software Update and see if the iPhone is still on iOS 8.0 or if it is now on iOS 8.0.2 -
My iphone 5 suddenly died and won't turn back on even after doing the recovery procedure. Even when I put it on charge the apple sign appears for 5-7 seconds and even after that it won't turn on. Help?!?!
DFU mode an try to restore to iOS6.1.4 it will wipe out the whole device if it works but than youll kno if its a software issue if it works or ahardware issue if it dont work
-
My mac book pro will not fully boot up. I have the grey background with the apple sign and the timer going round...but 20 minutes later still no desktop
You could try doing a hard shut down (holding the power button or yanking the battery) and then doing a safe boot by holding the shift key at startup:
http://support.apple.com/kb/HT1455
Also, not sure if this applies in your case, but I've had that happen when there's a USB drive inserted either in the computer or a connected external keyboard. I did a hard shut down, removed the drive and it went through a normal start up. -
When attempting to download, in the Launch Application panel, it says ..."this link needs to be opened with an application" and shows send to "CC URI Handler", but also Choose an application. How do I get past this point, as neither option seems to work?
Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
Hi i recently bought 8gb of ram and installed it in my mid 2010 13' macbook pro, but whenever i start my computer it freezes at the apple sign in the startup. I just put back my default 4gb of ram back into my computer and it runs fine. Any suggestions?
jamiesfromportland, greetings: I do not take issue with your very valid reasons for purchasing RAM from Apple. However by recommending not to purchase RAM from third party vendors I would suggest is unfounded advice. Most of the problems that occur with third party RAM are attributable to the lack of adherence to the required specifications, viz. this post.
I would be willing to wager that purchasing RAM from reputable vendors such as OWC or Crucial one would find similar fail/success ratios as those purchased from Apple. In both cases this assumes that the specifications are adhered to.
I have always purchased RAM upgrades from third party vendors with no performance issues. True that I do so to save money but I do not skimp on quality.
Ciao. -
I created an id prior to having tech. assistance and now the non payment option is not available. How to I get past this stage? Help! Already frustrated with Apple.
Already frustrated by jumping in and not getting some needed information before hand, hmm k
Create a new apple id - OR
create a new free web base email - sign into the apple id you have now edit the primary email address with the just newly created email save [you justs freed your email address from being an apple id]
Once you have all the4 correct information/data etc needed to be able to then chose option None
use that email to create apple id -
My MacBook Air 2012 turns on an the key board lights up however the screen stays black but when I shine a torch through the apple sign on the back you can see the login is there a way to fix this??
1. Press the F2 key couple of times.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
On my iPhone 4, I cannot get the "not enough storage on iCloud" message to close. Therefore, I can't get past this box/screen AND I can't turn the device off. Please help.
Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then releasing. You won't lose any data by doing this.
-
My phone keeps turning itself off and I have to hold down the buttons to reset it today I tried to do the same but no luck and it just froze with the apple sign or the battery power sign what can I do?
See this article how to go about restoring your device from recovery mode:
http://support.apple.com/kb/HT1808
Good luck! -
when i charge my ipod it turns on to the apple sign then shuts down again wont turn on and has no battery i tried getting a new cable but it still didnt work i also tried to push the home button and power off button and still didnt work also out of warrenty
When you plug it in to iTunes does it show up under devices? Try restoring it. That's the best thing you can do if you're out of warrenty
Maybe you are looking for
-
I just purchased a movie and finished the interrupted download today. However when I look in the My Purchases section for movies I don't see it. Please help. Thanks
-
Hi, If I install an Apple TV next to an HDTV, will it need to communicate with any Mac so it can retrieve iTunes videos from the Mac, or will the Apple TV have the ability to access my iTunes account, retrieve the video and play it without any commun
-
How do I get iTunes to recognize my ipod touch
Itunes does not recognize my ipod touch. It did at one time. Can someone get me going again?
-
How to deploy and configure custom JAAS login module
Dear Experts, I have created a custom jaas login module, In my .jar I am having 1. MyLoginModule.class 2. Handler.class 3. MyPrincipal.class I want to know how to deploy the custom jaas module to oc4j. And make available to all other application to u
-
IW31 how to set functional area as a default value?
Dear all: Can anyone guide me, is any way to set "functional area" as a default value (t-code iw31 Additional Data -> Functional area)? Thanks in advance.