Hai frds

hai plz help me out.
i have devoloped the module pool.
it has some fields in single and one table control.
when i am trying to move whole data into module pool only some fields are comming in table and not all.
when i am trying to change some logic its not moving the values at all into table.
can u please help me with some code if possibnle for how to move data from module pool with table control  to ztable.
thanks

Hi anshul,
To update database table using table control first declare one internal table.First transfer data from table control fields to internal table after that using insert statement insert those records from internal table to database table.
Suppose your table control contains fields from kna1 then write like this in PAI...
When 'INSERT'.
move kna1 to it_itab.
Append it_itab.
INSERT into kna1 values it_itab.
Here it_itab is an internal table with structure same as kna1.
Reward points if it is useful.
Regards,
Swetha.

Similar Messages

  • Report without input screen working diffrently in debugging and background

    hai,frds
    I have one report without input-screen,But it is working diffrently in background and debugger.
    please help me for this  and i am bapi inside the program to create entries.but
    if its in debugging it is crates corectly but if is in back ground it not working cooetly bapi working one time only.
    plese help me  for this.
    Moderator Message: Too much of text-speak/sms-speak. Thread Locked. Write complete words and check their spellings using the Spell-Check tool in the editor here.
    Edited by: kishan P on Jan 19, 2012 4:40 PM

    HI,
    In SM37,Put the cursor on the Job, Type 'JDBG' in Command line and press Enter.
    You can able to debug your Background job now.
    Find out where it is going wrong.....
    how to debug background job

  • Customer Master BAPI for PI interface

    Hai Frds,
    We are using the PI interface for taking Customer data from Legacy and creating in ECC.  For this we are using BAPIs. We have some BAPIs for customer creation but all are for online creation only. Is there any BAPI for creating the customer through Interface.
    I found one BAPI : /SAPNEA/SMAPI_CUSTOMER_CREATE.
    But its creating the customer with reference customer only. Also there is no Reconciliation Account field which is mandatory for our req.

    we have to send status(both immediate and batch) back to Legacy for each document posted in ECC. If i will use IDOC i have to use one INBOUND IDOC for getting data in to SAP and one OUTBOUND IDOC for sending status(which i have catch from some Ztable)  to legacy . All this is Lengthy process to do. So, we planned to go for BAPIs which will catch status immediately.
    So, Looking for BAPI for customer master.

  • Web service client problem

    hai frds,
    pls send reply to me its urgent
    create a web service in weblogic 9.2 (jax-WS) and wsdl publihed in server .but creating the client(web application) using the client its deployed in the server with out errors,but the calling time its show the error like this
    listener
    com.sun.xml.ws.transport.http.servlet.WSServletContextListener failed: java.lang
    .NoSuchMethodError: javax.jws.WebService.portName()Ljava/lang/String;.
    java.lang.NoSuchMethodError: javax.jws.WebService.portName()Ljava/lang/String;
    at com.sun.xml.ws.modeler.RuntimeModeler.getPortName(RuntimeModeler.java
    :1215)

    Not sure I totally get your question, but I'll give it a shot.
    1 - You may be missing a jar in your Classpath.
    Is the javax.jws package in the Weblogic webservices.jar file? I haven't used WL recently (since 8.1 at least). If not, it may be another jar file
    2 - Different compile and runtime jar files.
    Are compiling against a different version of the class than what you have in your running environment? This may explain the "disappearance" of your portName() method.
    Hope it helps.
    SBO

  • Table contents transport

    hai, frds
    can u hell me ans for this ques?
    can we transfer the table contents form one system to other system or client to client ?
    if yes how and what are the way's to move.
                                                                                  thank u
    Moderator message: FAQ, please search for previous discussions of this topic.
    Edited by: Thomas Zloch on Oct 24, 2011 10:51 AM

    Hi Srivani,
    To transport the table entries from one system to other, you can create either a workbench or a customizing transport.
    Then in SE09, goto that transport and click on the transport request. Goto Objects in edit mode, enter in Program ID 'R3TR' and in Object 'TABU'. Then press enter. When you press enter a Key icon will appear. Click on that icon and there enter the table key data and then  you can transport your TR.
    Hope this helps,
    Regards,
    Himanshu Aggarwal

  • Mac Mini worked at first with Haier 42" plasma - now won't.  Please Help!

    I'd be interested in any resolution here. Here's my story:
    I have a Mac Mini model MA723LL/A and a Haier P42LV6-T1 42" HDTV plasma with VGA and HDMI inputs. I first attempted to hook the Mac to the plasma TV using the DVI->VGA adapter that came with the Mac. I got no image at all on the TV, and the TV claimed 'No Signal'.
    Then I used a DVI->HDMI adapter, and hooked the Mac to the TV thru the HDMI port. I got a picture and was happy. I setup iTunes, got the wireless working, surfed the web a bit and all was OK except the resolution seemed wonky. So I opened the Mac's settings panel to adjust the resolution, and as soon as I opened the settings panel, the screen went blank, with the TV claiming 'No Signal'. I shut off the Mac and rebooted, and from that point forward, what happens is this:
    press On Button->
    Apple Boot Screen->
    MacOS 10 loading->
    desktop For About 1 millisecond->
    screen goes blank with TV claiming 'No Signal'
    I hooked the Mac to my Dell 20" LCD monitor thru the monitor's DVI input and got a great picture. I tested all the resolution settings, and everything was fine. I have tested the Mac on the TV with all available resolution settings and it's always the same story (see above for sequence)
    I'm kinda at the end of my rope. The Mac seems to be changing something on its video output at the end of its bootup, but I have no clue what. Has anyone seen anything like this? Any advice at all?

    Try what Apple recommends and see if that helps:
    http://docs.info.apple.com/article.html?artnum=301345

  • Hai when my iphone 5 connet to my windows 7 error massege is blink on my system the error code is oxe8000084 how to solve my problem

    hai when my iphone 5 connet to my windows 7 error massege is blink on my system the error code is oxe8000084 how to solve my problem

    https://discussions.apple.com/message/22296149#22296149
    more from the google I did
    iphone error 21

  • HT201496 Hai there. I am facing trouble with my garageband apple loops.i don't see apple loops in my browser since quite some time i don't know what has happened to it and how it happened . i just wanted to learn some of basic things about music.can you h

    Hai there. i am having a trouble with the garage band apple loops to get into my macbook pro. . i had it some time back and i dont know where it has gone and how it get it back. is there anyone to help me to get the loops back into the browser . i will be grateful to you if some one can help me with it/ thanks.

    First check, if you do not accidentally have hidden or filtered your loops:
    Uncheck the "Filter for more relevant results" option in the Audio tab of the GarageBand Preferences.
    And the drop down menu on top of the Loop Browser should be set to "Loops", not to some Jam Pack or other collection.
    If you still don't see any loops, check if you have set your project to a special signature, like 9/8, for that no standard loops do exist.
    Then check, if any loops actually are installed in your system Library: Depending on your GarageBand version you should find the standard loops in the Audio folder of your system Library (Application Support > GarageBand):
        Your System Drive > Library > Audio > Apple Loops
    If the Loops are installed, but GarageBand does not show them, you need to rebuild your Apple Loops Index: See the FAQ for how to do it:
    Re-Index GarageBand's Loops
    This requires two steps:
    erase the old Apple Loops Index by deleting everything in
    Your System Drive > Library > Audio > Apple Loops Index
    and then rebuilding the Loops Index by dragging the folder containing all of your loops onto the Loop Browser in GarageBand.
    If no Loops are installed in your Library, you will have to restore them from your Backup.
    Regards
    Léonie

  • Hai friends one help .. I tried to install siebel 8.1 (sample) in windows 7

    Hai friends i tried to install siebel 8.1(sample) in windows 7 i tried and installed everything perfectly.. its not working fine..
    First i installed siebel client and next siebel sample dumb and next is siebel tools
    while i installing siebel tools it throwing an error like tat missing Microsoft sql Native client is missing .. and how can i overcomethis (MSNC)
    and client is also not opening fine. Can u elaborate the steps and how can i install successfully siebel 8.1 in windows 7 ?
    is it possible please explain me and help me to guide and suggest me
    Thanks & Regards
    Kiran

    Kiran,
    Please mention the exact error you are facing. Were the Siebel 8.1 image files created successfully ?
    Before we install the Siebel client software on our Microsoft Windows workstations or laptops, we should verify that the following
    prerequisites are met:
    1.) Database client software is installed (for Developer Web Client only) [Since you dont have the server env. ,  you dont need to install db client]
    2.) The user account for the installation has administrative rights. (user account must be a member of the local Administrators group)
    3.) Browser security settings are correct
    Once you have created the Image files for Tools,Client and Sample DB , just run the oui.exe for Tools/Client , and install.exe for Sample DB.
    During Client installation , one thing to note is , Internet Explorer is launched . Here , the browser loads the predeploy.htm file in the client's bin directory to load
    the preconfigured ActiveX controls. When the page displays The download is complete… we can close the browser window , and the installation continues.
    For Sample db installation , In the Destination Folder section, click Browse and navigate to the Siebel client installation directory.
    (i.e. Client need to be installed before the sample db)

  • Issue with FRD and Forms Trace in Oracle Apps Release 12.0.6 forms

    Hi,
    Morning..could someone please assist us with this issue..
    We are trying to generate FRD and Forms Trace for a seeded Oracle Apps Forms in Release version 12.0.6
    1. We have setup the below mentioned profile option at the user level : ICX: Forms Launcher
    value : http://<host_name>:<port number>/OA_HTML/frmservlet?record=forms tracegroup=medium
    tried with this value as well : http://<host_name>:<port number>/OA_HTML/frmservlet?record=forms tracegroup=0-97
    and then log out and then tried the transaction steps again in Oracle Apps frontend
    2. Then checked at the directory location named : $FORMS_TRACE_DIR and there we see a file generated like this :forms_19136694.trc
    But in this file we could only see the generic seeded error messages...why are we not seeing all the message calls showing all the details regards form level trigger , data blocks , values etc for the form
    We need to have the FRD & Forms trace generated urgently for an issue...
    Could someone please help us as to how a complete FRD & Forms Trace be generated in Oracle Forms in Oracle Apps version R 12.0.6 & what exact steps need to be checked.
    Thanks

    2. Then checked at the directory location named : $FORMS_TRACE_DIR and there we see a file generated like this :forms_19136694.trc
    But in this file we could only see the generic seeded error messages...why are we not seeing all the message calls showing all the details regards form level trigger , data blocks , values etc for the form What is the timestamp of the file? Have you tried to delete/rename the file, reproduce the issue and see if a new file is generated?
    You would need to logout and login again, or bounce the application services (if possible) after doing the necessary configuration steps and before reproducing the issue.
    We need to have the FRD & Forms trace generated urgently for an issue...
    Could someone please help us as to how a complete FRD & Forms Trace be generated in Oracle Forms in Oracle Apps version R 12.0.6 & what exact steps need to be checked.Please see these docs.
    R12: Forms Runtime Diagnostics (FRD), Tracing And Logging For Forms In Oracle Applications [ID 438652.1]
    How To Collect And Use Forms Trace (FRD) in Oracle Applications Release 12 [ID 373548.1]
    Steps To Take FRD Trace in 11.5.10 & R12 [ID 867943.1]
    How To Generate A Stack Trace For Forms With Applications R12 [ID 789659.1]
    Thanks,
    Hussein

  • HT1199 Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

    Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.

    Hi ajay-9,
    Thanks for visiting Apple Support Communities.
    The steps in this article can help if iTunes is quitting unexpectedly on your PC:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Cheers,
    Jeremy

  • Hai , How to create 'Define New ' ?

    hai,
    How to create 'Define New ' in Combo box and then Enter the value in the user defined table how to get the value  from the database table and display combo box ?

    Hi.
    I used this example for the matrix column. It's work and open a form for defining new values.
    Your need to add an event to refresh values in combobox.
    Think I help you.
    Best regards
    Sierdna S.
    P.S. How to proceed.
    1) Fill the combobox with valid values:
    Try
      ' Add first value to combobox
      oCombo.ValidValues.Add("", "")
      Dim oRS As SAPbobsCOM.Recordset
      oRS = SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
      Dim sSql As String = "SELECT Code, Name FROM [@" & sLinkedTable & "]"
      oRS.DoQuery(sSql)
      oRS.MoveFirst()
      While oRS.EoF = False
          oCombo.ValidValues.Add(oRS.Fields.Item("Code").Value, oRS.Fields.Item("Name").Value)
          oRS.MoveNext()
      End While
      ' Last value
      oCombo.ValidValues.Add("Define","Define")
      If Not oRS Is Nothing Then
          System.Runtime.InteropServices.Marshal.ReleaseComObject(oRS)
          oRS = Nothing
      End If
      System.GC.Collect() 'Release the handle to the table
    Catch ex As Exception
      ' log exception
    Finally
      oCombo = Nothing
    End Try
    2) In Item event handler
    If pVal.EventType = SAPbouiCOM.BoEventTypes.et_COMBO_SELECT _
    And pVal.FormUID = sFormUID _
    And pVal.ItemUID = sMatrixUID _
    And pVal.ColUID = sColUID _
    And pVal.BeforeAction = False _
    And pVal.ItemChanged = True _
    Then
      Try
        Dim oMatrix As SAPbouiCOM.Matrix
        oMatrix = oForm.Items.Item(MatrixID).Specific
        If oMatrix Is Nothing Then Throw New Exception("ERROR: matrix object is nothing"))
        Try
          Dim oCombo As SAPbouiCOM.ComboBox
          Dim sValue As String = ""
          oCombo = oMatrix.Columns.Item(sColUID).Cells.Item(pVal.Row).Specific
          sValue = oCombo.Selected.Value
          If sValue.Equals("Define") Then
            Try
                oCombo.Select(0, SAPbouiCOM.BoSearchKey.psk_Index)
                oForm.Refresh()
            Catch ex As Exception
            ' log exception
            End Try
            SBO_Application.Menus.Item("<menu id to activate>").Activate()
          End If
          BubbleEvent = False
        Catch ex1 As Exception
          ' log exception
        End Try
      Catch ex As Exception
        ' log exception
      End Try
    End If

  • Hai ,problem with packages

    Hai all,
    i got a problem with user defined packages .i have one class under one package "sg.km" n the class name is kmc.class n i want to use that sg.km.kmc in some another class that is also a part of sg.km package .i hope i'll get reponses to my prob asap.
    thanks in advance
    yours
    srinu kumar reddy

    You should not need to import a class that is in the same package.
    You did not post enough information for me to give you a good answer. You should always post an error message along with any command you entered. All you said was, "i got a problem." We don't know if your problem is with compiling, running, jar file, applet, etc.
    You need to have a directory structure that matches your package. The kmc.class file a sg\km directory path. For example, c:\myjava\classes\sg\km\kmc.class. Then you need c:\myjava\classes directory in your Classpath both for compiling and running.

  • 11.5.10 INSTANCE에서 FRD LOG 생성하는 방법

    제품: AOL
    작성날짜 : 2006-05-11
    11.5.10 INSTANCE에서 FRD LOG 생성하는 방법
    ==========================================
    PURPOSE
    11.5.10 UI Forms에서 발생하는 issue 해결 도움을 위해 Support 및
    Development가 이용하는 FRD Trace log 생성하는 방법을 알아본다.
    Explanation
    11.5.10 instance에서 FRD를 생성하기 위해 아래 steps을 따른다.
    1.Apps user로 Unix session instance에 login 한다.
    모든 환경 변수를 display 하기 위해 set command 이용한다.
    Find the variable “FORMS60_TRACE_PATH”
    이 directory path는 FRD file 생성에 이용되며,아래 설명되는 ICX Profile
    URL의 한 부분이다.
    2.Application의 System Administrator responsibility에 login 한다.
    3.아래 profile을 User Level에 추가,본인의 "host.domain.country”과
    "FORMS60_TRACE_PATH"은 제외한다.
    ICX: Forms Launcher = http://host.domain.com:8000/dev60cgi/f60cgi?
    &record=collect&log=/forms60_trace_path/Your_Name.FRD.log
    본인의 host.domain.com을 위에 대신 넣고,“&log=”directory section 엔
    당신의 FORMS60_TRACE_PATH를 입력한다.
    개인의 capture를 위해 USERNAME.FRD.log를 이용한다.
    11.5.10 에서는 Security 이유로 logging directory가 usr_dump_dest에서
    FORMS60_TRACE_PATH 환경 변수로 변경되었다.
    "&record" 시작 부분에 "?play="가 없어졌으며,"f60cgi?"에 "/"도 없다.
    Directory에 접근하거나 login을 위해 Putty나 다른 ftp connection
    software를 이용해야만 하고,FRD file을 unix directory에서 개인 PC로
    ftp할 필요가 있다.
    4.Application을 lotout, OM super user로 다시 login 한다.
    5.Login 하면 'Logging FRD' message를 볼 수 있을 것이다.
    6.FRD log 생성을 위해 필요한 forms navigations을 실행한다.
    7.FRD logging이 끝나면 FRD file을 close 하기 위해 application을
    logout 하고, local PC에 생성된 FRD를 ftp 한다.
    8.FRD 생성후에는 performance 문제가 있으므로 본인의 이름으로 setting
    한 profile "ICX: Forms Launcher" 값을 remove 한다.
    이 profile이 있으면 매번 login시마다 FRD가 실행되게 된다.
    Reference Documents
    Note 335872.1

    제품: AOL
    작성날짜 : 2006-05-11
    11.5.10 INSTANCE에서 FRD LOG 생성하는 방법
    ==========================================
    PURPOSE
    11.5.10 UI Forms에서 발생하는 issue 해결 도움을 위해 Support 및
    Development가 이용하는 FRD Trace log 생성하는 방법을 알아본다.
    Explanation
    11.5.10 instance에서 FRD를 생성하기 위해 아래 steps을 따른다.
    1.Apps user로 Unix session instance에 login 한다.
    모든 환경 변수를 display 하기 위해 set command 이용한다.
    Find the variable “FORMS60_TRACE_PATH”
    이 directory path는 FRD file 생성에 이용되며,아래 설명되는 ICX Profile
    URL의 한 부분이다.
    2.Application의 System Administrator responsibility에 login 한다.
    3.아래 profile을 User Level에 추가,본인의 "host.domain.country”과
    "FORMS60_TRACE_PATH"은 제외한다.
    ICX: Forms Launcher = http://host.domain.com:8000/dev60cgi/f60cgi?
    &record=collect&log=/forms60_trace_path/Your_Name.FRD.log
    본인의 host.domain.com을 위에 대신 넣고,“&log=”directory section 엔
    당신의 FORMS60_TRACE_PATH를 입력한다.
    개인의 capture를 위해 USERNAME.FRD.log를 이용한다.
    11.5.10 에서는 Security 이유로 logging directory가 usr_dump_dest에서
    FORMS60_TRACE_PATH 환경 변수로 변경되었다.
    "&record" 시작 부분에 "?play="가 없어졌으며,"f60cgi?"에 "/"도 없다.
    Directory에 접근하거나 login을 위해 Putty나 다른 ftp connection
    software를 이용해야만 하고,FRD file을 unix directory에서 개인 PC로
    ftp할 필요가 있다.
    4.Application을 lotout, OM super user로 다시 login 한다.
    5.Login 하면 'Logging FRD' message를 볼 수 있을 것이다.
    6.FRD log 생성을 위해 필요한 forms navigations을 실행한다.
    7.FRD logging이 끝나면 FRD file을 close 하기 위해 application을
    logout 하고, local PC에 생성된 FRD를 ftp 한다.
    8.FRD 생성후에는 performance 문제가 있으므로 본인의 이름으로 setting
    한 profile "ICX: Forms Launcher" 값을 remove 한다.
    이 profile이 있으면 매번 login시마다 FRD가 실행되게 된다.
    Reference Documents
    Note 335872.1

  • HT4994 HAI CAN YOU TELL ME WHICH SIM IS USED IN THIS IMEI **** AND WHICH COUNTRY

    HAI CAN YOU TELL ME WHICH SIM IS USED IN THIS IMEI **** AND WHICH COUNTRY
    <Edited By Host>

    No. Sorry, no one here can help you.
    The only reliable way to determine this info is to call AppleCare.

Maybe you are looking for