Hai friends after read,how to write the modify stmt

READ TABLE IT_makt into wa_makt with key matnr = wa_ekpo-matnr.

hi check this...
types: begin of ttab ,
      vbeln(10) type c ,
      vkorg(4) type c,
      dele(4)   type c,
      end of ttab ,
    begin of ttab1 ,
     vbeln(10) type c,
     dele(4)   type c,
     end of ttab1 .
data: itab type table of ttab with header line,
      itab1 type table of ttab1 with header line,
wa like line of itab ,
wa1 like line of itab1 .
itab-vbeln = '0000000001'.
itab-vkorg = '1000'.
itab-dele = 'DEL'.
append itab .
itab-vbeln = '0000000002'.
itab-vkorg = '1000'.
itab-dele = 'DEL'.
append itab .
itab-vbeln = '0000000003'.
itab-vkorg = '1000'.
itab-dele = 'DEL'.
append itab .
itab1-vbeln = '0000000001'.
itab1-dele = 'TST'.
append itab1 .
itab1-vbeln = '0000000002'.
itab1-dele = 'GRE'.
append itab1 .
sort itab by vbeln.
sort itab1 by vbeln.
loop at itab into wa.
data:v_index type sy-index .
v_index = sy-tabix.
read table itab1 into wa1 with key vbeln = wa+0(10).
wa14(4) = wa110(4).
modify itab index v_index from wa   .
endloop.
loop at itab.
write:/ itab-vbeln,itab-vkorg,itab-dele .
endloop.

Similar Messages

How to write the exceptions in function module

dear all,
how to write the exceptions in function modules with example.
thanq
jyothi

Hi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

How to write the JTables Content into the CSV File.

Hi Friends
I managed to write the Database records into the CSV Files. Now i would like to add the JTables contend into the CSV Files.
I just add the Code which Used to write the Database records into the CSV Files.
void exportApi()throws Exception
          try
               PrintWriter writing= new PrintWriter(new FileWriter("Report.csv"));
               System.out.println("Connected");
               stexport=conn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE);
               rsexport=stexport.executeQuery("Select * from IssuedBook ");
               ResultSetMetaData md = rsexport.getMetaData();
               int columns = md.getColumnCount();
               String fieldNames[]={"No","Name","Author","Date","Id","Issued","Return"};
               //write fields names
               String rec = "";
               for (int i=0; i < fieldNames.length; i++)
                    rec +='\"'+fieldNames[i]+'\"';
                    rec+=",";
               if (rec.endsWith(",")) rec=rec.substring(0, (rec.length()-1));
               writing.println(rec);
               //write values from result set to file
                rsexport.beforeFirst();
               while(rsexport.next())
                    rec = "";
                     for (int i=1; i < (columns+1); i++)
                         try
                                rec +="\""+rsexport.getString(i)+"\",";
                                rec +="\""+rsexport.getInt(i)+"\",";
                         catch(SQLException sqle)
                              // I would add this System.out.println("Exception in retrieval in for loop:\n"+sqle);
                     if (rec.endsWith(",")) rec=rec.substring(0,(rec.length()-1));
                    writing.println(rec);
               writing.close();
     }With this Same code how to Write the JTable content into the CSV Files.
Please tell me how to implement this.
Thank you for your Service
Jofin

Hi Friends
I just modified my code and tried according to your suggestion. But here it does not print the records inside CSV File. But when i use ResultSet it prints the Records inside the CSV. Now i want to Display only the JTable content.
I am posting my code here. Please run this code and find the Report.csv file in your current Directory. and please help me to come out of this Problem.
import javax.swing.*;
import java.util.*;
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.table.*;
public class Exporting extends JDialog implements ActionListener
     private JRadioButton rby,rbn,rbr,rbnore,rbnorest;
     private ButtonGroup bg;
     private JPanel exportpanel;
     private JButton btnExpots;
     FileReader reading=null;
     FileWriter writing=null;
     JTable table;
     JScrollPane scroll;
     public Exporting()throws Exception
          setSize(550,450);
          setTitle("Export Results");
          this.setLocation(100,100);
          String Heading[]={"BOOK ID","NAME","AUTHOR","PRICE"};
          String records[][]={{"B0201","JAVA PROGRAMING","JAMES","1234.00"},
                           {"B0202","SERVLET PROGRAMING","GOSLIN","1425.00"},
                           {"B0203","PHP DEVELOPMENT","SUNITHA","123"},
                           {"B0204","PRIAM","SELVI","1354"},
                           {"B0205","JAVA PROGRAMING","JAMES","1234.00"},
                           {"B0206","SERVLET PROGRAMING","GOSLIN","1425.00"},
                           {"B0207","PHP DEVELOPMENT","SUNITHA","123"},
                           {"B0208","PRIAM","SELVI","1354"}};
          btnExpots= new JButton("Export");
          btnExpots.addActionListener(this);
          btnExpots.setBounds(140,200,60,25);
          table = new JTable();
          scroll=new JScrollPane(table);
          ((DefaultTableModel)table.getModel()).setDataVector(records,Heading);
          System.out.println(table.getModel());
          exportpanel= new JPanel();
          exportpanel.add(btnExpots,BorderLayout.SOUTH);
          exportpanel.add(scroll);
          getContentPane().add(exportpanel);
          setVisible(true);
      public void actionPerformed(ActionEvent ae)
          Object obj=ae.getSource();
          try {
          PrintWriter writing= new PrintWriter(new FileWriter("Report.csv"));
          if(obj==btnExpots)
               for(int row=0;row<table.getRowCount();++row)
                         for(int col=0;col<table.getColumnCount();++col)
                              Object ob=table.getValueAt(row,col);
                              //exportApi(ob);
                              System.out.println(ob);
                              System.out.println("Connected");
                              String fieldNames[]={"BOOK ID","NAME","AUTHOR","PRICE"};
                              String rec = "";
                              for (int i=0; i <fieldNames.length; i++)
                                   rec +='\"'+fieldNames[i]+'\"';
                                   rec+=",";
                              if (rec.endsWith(",")) rec=rec.substring(0, (rec.length()-1));
                              writing.println(rec);
                              //write values from result set to file
                               rec +="\""+ob+"\",";
                               if (rec.endsWith(",")) rec=rec.substring(0,(rec.length()-1));
                               writing.println(rec);
                               writing.close();
     catch(Exception ex)
          ex.printStackTrace();
     public static void main(String arg[]) throws Exception
          Exporting ex= new Exporting();
}Could anyone Please modify my code and help me out.
Thank you for your service
Cheers
Jofin

How to write the logic for extending Idocs...

Hi,
      Can anybody pls explain how to write the logic for extending IDOCs with an example...
      Good suggestions can be appreciated..
Regards,
Ram

Hi Ram,
Generally the IDoc user exit is called at the following places:
1) When the control record is read.
2) After each and every segment in the data record
3) At the end of the data segment processing.
The IDoc user exit interface generally imports IDOC_DATA (data record internal table) table. Now the data records in the internal table should appear in the same order as maintained while defining IDoc structure (WE30 transaction). For SAP standard segment SAP code will take care of this. For extended segment you will have to take care of this aspect by appending the Z-segment in the IDOC_DATA table.
You can do this by:
         looping at IDOC_DATA table:
             - Do a case-endcase fo IDOC_DATA-SEGNAM (This stores the segment
               structure as per the hierarchy).
             - Within the case for "Z-segment" you can write the logic for appending
               the Z-segment to IDOC_DATA-SDATA.
Hope this gives some clue.
Regards,
Gajendra.

How to write the oracle data as XML format. (.XML file)

create or replace procedure pro(p_number )
is
cursor c1 is select *from emp where empno=p_number;
v_file utl_file.file_type;
begin
v_file := utl_file.fopen('dirc','filename.txt','w');
for i in c1 loop
utl_file.put_line(v_file,i.ename || i.empno ||i.job);
end loop;
closef(v_file);
end;
Now my client want instead of .txt file he need .xml files
File should contains xml tags. can any one help regarding this.. with one example.
How to write the oracle data as XML format. (.XML file)

hi,
hope this example will do something....
SQL> select employee_id, first_name, last_name, phone_number
2 from employees where rownum < 6
EMPLOYEE_ID FIRST_NAME LAST_NAME PHONE_NUMBER
100 Steven King 515.123.4567
101 Neena Kochhar 515.123.4568
102 Lex De Haan 515.123.4569
103 Alexander Hunold 590.423.4567
104 Bruce Ernst 590.423.4568
SQL> select dbms_xmlgen.getxml('select employee_id, first_name,
2 last_name, phone_number from employees where rownum < 6') xml
3 from dual;
*<?xml version="1.0"?>*
*<ROWSET>*
*<ROW>*
*<EMPLOYEE_ID>100</EMPLOYEE_ID>*
*<FIRST_NAME>Steven</FIRST_NAME>*
*<LAST_NAME>King</LAST_NAME>*
*<PHONE_NUMBER>515.123.4567</PHONE_NUMBER>*
*</ROW>*
*<ROW>*
*<EMPLOYEE_ID>101</EMPLOYEE_ID>*
*<FIRST_NAME>Neena</FIRST_NAME>*
*<LAST_NAME>Kochhar</LAST_NAME>*
*<PHONE_NUMBER>515.123.4568</PHONE_NUMBER>*
*</ROW>*
*<ROW>*
*<EMPLOYEE_ID>102</EMPLOYEE_ID>*
*<FIRST_NAME>Lex</FIRST_NAME>*
*<LAST_NAME>De Haan</LAST_NAME>*
*<PHONE_NUMBER>515.123.4569</PHONE_NUMBER>*
*</ROW>*
*<ROW>*
*<EMPLOYEE_ID>103</EMPLOYEE_ID>*
*<FIRST_NAME>Alexander</FIRST_NAME>*
*<LAST_NAME>Hunold</LAST_NAME>*
*<PHONE_NUMBER>590.423.4567</PHONE_NUMBER>*
*</ROW>*
*<ROW>*
*<EMPLOYEE_ID>104</EMPLOYEE_ID>*
*<FIRST_NAME>Bruce</FIRST_NAME>*
*<LAST_NAME>Ernst</LAST_NAME>*
*<PHONE_NUMBER>590.423.4568</PHONE_NUMBER>*
*</ROW>*
*</ROWSET>*
ask if you want more assistance.
thanks.

How to write the nodevalue back to xml file?

Hi, Everybody:
These are two packages I used. javax.xml.parsers.*,org.w3c.dom.*
Now I use "setNodeValue("abc") to set the node value to "abc". But it is not really saved back into XML file. It only change the node value in memory.
How to write the changes back to XML file? Thank you very much for your help.
Michelle

* Version : 1.00
* File Purpose : Given the xml file loads into dom and recreate the file with the updated values.
* Developer : Kashif Qasim : 25/july/04
* Modify detail :
import java.lang.*;
import java.io.*;
import java.util.*;
import java.text.*;
import org.w3c.dom.*;
import org.apache.xerces.parsers.DOMParser;
import org.apache.xerces.*;
public class XMLWriter
private String displayStrings[] = new String[5000];
private int numberDisplayLines = 0;
private Document document;
//private final Node c;
public synchronized void displayDocument(String uri,Vector UpdatedValues,String getTaskID)
try {
DOMParser parser = new DOMParser();
parser.parse(uri);
document = parser.getDocument();
display(document, "",UpdatedValues);
} catch (Exception e) {
e.printStackTrace(System.err);
ReadXmlConfig objReadXmlConfig = null;
FileWriter filewriter = null;
try {
filewriter = new FileWriter(uri);
for(int loopIndex = 0; loopIndex < numberDisplayLines; loopIndex++){
filewriter.write(displayStrings[loopIndex].toCharArray());
//System.out.println("displayStrings[loopIndex].toCharArray() "+displayStrings[loopIndex].toString());
//filewriter.write("\n");
filewriter.close();
System.gc();
objReadXmlConfig = new ReadXmlConfig();
objReadXmlConfig.ITSLog("File updated for "+getTaskID+" succesfully, file is closed now ");
} catch (IOException e) {
System.err.println("Caught IOException: " + e.getMessage());
objReadXmlConfig = new ReadXmlConfig();
objReadXmlConfig.ITSErrorLog("File updated FAILED for "+getTaskID+". Reason for file error "+e.toString());
}finally {
if (filewriter != null) {
System.out.println("Closing File");
objReadXmlConfig =null;
try{
filewriter.close();
}catch(IOException e){
System.err.println("Caught IOException: " + e.getMessage());
} else {
System.out.println("File not open");
private void display(Node node, String indent, Vector UpdtRecs)
if (node == null) {
return;
int type = node.getNodeType();
NodeList nodeList = document.getElementsByTagName("QueryParm");
int TotalRecs = UpdtRecs.size();
switch (type) {
case Node.DOCUMENT_NODE: {
displayStrings[numberDisplayLines] = indent;
displayStrings[numberDisplayLines] +=
"<?xml version=\"1.0\" encoding=\""+
"UTF-8" + "\"?>";
numberDisplayLines++;
displayStrings[numberDisplayLines] += "\n";
display(((Document)node).getDocumentElement(), "",UpdtRecs);
break;
case Node.ELEMENT_NODE: {
if(node.getNodeName().equals("QueryParm")) {
for(int i =0 ; i< nodeList.getLength() ; i++)
Node nodeQry = nodeList.item(i);
NamedNodeMap nnp = nodeQry.getAttributes();
for(int j= 0 ; j < nnp.getLength() ; j++)
Attr atr = (Attr) nnp.item(j);
if(atr.getName().equalsIgnoreCase("value_"+(i+1)))
//System.out.println(atr.getName() +" : " + atr.getNodeValue() );
atr.setNodeValue(UpdtRecs.get(i).toString());
displayStrings[numberDisplayLines] = indent;
displayStrings[numberDisplayLines] += "<";
displayStrings[numberDisplayLines] += node.getNodeName();
int length = (node.getAttributes() != null) ?
node.getAttributes().getLength() : 0;
Attr attributes[] = new Attr[length];
for (int loopIndex = 0; loopIndex < length; loopIndex++) {
attributes[loopIndex] = (Attr)node.getAttributes().item(loopIndex);
for (int loopIndex = 0; loopIndex < attributes.length; loopIndex++) {
Attr attribute = attributes[loopIndex];
displayStrings[numberDisplayLines] += " ";
displayStrings[numberDisplayLines] += attribute.getNodeName();
displayStrings[numberDisplayLines] += "=\"";
displayStrings[numberDisplayLines] += attribute.getNodeValue();
displayStrings[numberDisplayLines] += "\"";
displayStrings[numberDisplayLines]+=">";
numberDisplayLines++;
NodeList childNodes = node.getChildNodes();
if (childNodes != null) {
length = childNodes.getLength();
indent += " ";
for (int loopIndex = 0; loopIndex < length; loopIndex++ ) {
display(childNodes.item(loopIndex), indent,UpdtRecs);
break;
case Node.CDATA_SECTION_NODE: {
displayStrings[numberDisplayLines] = "";
displayStrings[numberDisplayLines] += "<![CDATA[";
displayStrings[numberDisplayLines] += node.getNodeValue();
displayStrings[numberDisplayLines] += "]]>";
numberDisplayLines++;
break;
case Node.TEXT_NODE: {
displayStrings[numberDisplayLines] = "";
String newText = node.getNodeValue().trim();
if(newText.indexOf("\n") < 0 && newText.length() > 0) {
displayStrings[numberDisplayLines] += newText;
displayStrings[numberDisplayLines] += "\n";
numberDisplayLines++;
break;
case Node.PROCESSING_INSTRUCTION_NODE: {
displayStrings[numberDisplayLines] = "";
displayStrings[numberDisplayLines] += "<?";
displayStrings[numberDisplayLines] += node.getNodeName();
String text = node.getNodeValue();
if (text != null && text.length() > 0) {
displayStrings[numberDisplayLines] += text;
displayStrings[numberDisplayLines] += "?>";
displayStrings[numberDisplayLines] += "\n";
numberDisplayLines++;
break;
if (type == Node.ELEMENT_NODE) {
displayStrings[numberDisplayLines] = indent.substring(0,
indent.length() - 4);
displayStrings[numberDisplayLines] += "</";
displayStrings[numberDisplayLines] += node.getNodeName();
displayStrings[numberDisplayLines] += ">";
displayStrings[numberDisplayLines] += "\n";
numberDisplayLines++;
indent += " ";
public static void main(String args[])
Vector xmlValue = new Vector();
xmlValue.add(0,"Kashif");
xmlValue.add(1,"Qasim");
//displayDocument("NewMediation.xml",xmlValue);
<?xml version="1.0" encoding="UTF-8"?>
<Mediation>
<Task1>
<Source>
<SourceDriver>com.microsoft.jdbc.sqlserver.SQLServerDriver</SourceDriver>
<SourceConnection>jdbc:microsoft:sqlserver://10.2.1.58:1433;DatabaseName=MTCVB_HDS;</SourceConnection>
<SourceUser>sa</SourceUser>
<SourcePassword>sa</SourcePassword>
<Table>
<SourceTable>t_Agent</SourceTable>
<SourceQuery><![CDATA[SELECT SkillTargetID,PersonID,PeripheralID,EnterpriseName,PeripheralNumber,Deleted,TemporaryAgent,AgentStateTrace,ChangeStamp FROM t_Agent where SkillTargetID > {value_1} order by SkillTargetID]]>
</SourceQuery>
<SourceParm BusinessRule="" ColumnName="SKILLTARGETID" ColumnNumber="1" DataType="Numeric" DefaultValue="0" Format="mm/dd/yyyy xx:xx:xx XX">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="PERSONID" ColumnNumber="2" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="PERIPHERALID" ColumnNumber="3" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="ENTERPRISENAME" ColumnNumber="4" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="PERIPHERALNUMBER" ColumnNumber="5" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="DELETED" ColumnNumber="6" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="TEMPORARYAGENT" ColumnNumber="7" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="AGENTSTATETRACE" ColumnNumber="8" DataType="String" DefaultValue="" Format="">
</SourceParm>
<SourceParm BusinessRule="" ColumnName="CHANGESTAMP" ColumnNumber="9" DataType="String" DefaultValue="" Format="">
</SourceParm>
<QueryParm FldName_1="SkillTargetID" FldType_1="Number" value_1="0">
</QueryParm>
</Table>
</Source>
</Task1>
</Mediation>
The QueryParm values are updated thru this code :)
Hope it helps u ...

How to write the code to send the report output to the local file.

dear all,
how to write the code to send the report output to the local file.
Thanks & Regards,
Jyothi.

Hi,
Try this , it will display report and download the file as well. Just vhange the path and execute
TYPE-POOLS : SLIS.
DATA : IT_SCARR TYPE TABLE OF SCARR,
       IT_FCAT TYPE SLIS_T_FIELDCAT_ALV.
SELECT *
FROM SCARR
INTO TABLE IT_SCARR.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
*   I_PROGRAM_NAME               =
*   I_INTERNAL_TABNAME           =
    I_STRUCTURE_NAME             = 'SCARR'
*   I_CLIENT_NEVER_DISPLAY       = 'X'
*   I_INCLNAME                   =
*   I_BYPASSING_BUFFER           =
*   I_BUFFER_ACTIVE              =
CHANGING
    CT_FIELDCAT                  = IT_FCAT
* EXCEPTIONS
*   INCONSISTENT_INTERFACE       = 1
*   PROGRAM_ERROR                = 2
*   OTHERS                       = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
*   I_INTERFACE_CHECK              = ' '
*   I_BYPASSING_BUFFER             =
*   I_BUFFER_ACTIVE                = ' '
*   I_CALLBACK_PROGRAM             = ' '
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   I_STRUCTURE_NAME               =
*   IS_LAYOUT                      =
   IT_FIELDCAT                    = IT_FCAT
*   IT_EXCLUDING                   =
*   IT_SPECIAL_GROUPS              =
*   IT_SORT                        =
*   IT_FILTER                      =
*   IS_SEL_HIDE                    =
*   I_DEFAULT                      = 'X'
*   I_SAVE                         = ' '
*   IS_VARIANT                     =
*   IT_EVENTS                      =
*   IT_EVENT_EXIT                  =
*   IS_PRINT                       =
*   IS_REPREP_ID                   =
*   I_SCREEN_START_COLUMN          = 0
*   I_SCREEN_START_LINE            = 0
*   I_SCREEN_END_COLUMN            = 0
*   I_SCREEN_END_LINE              = 0
*   IR_SALV_LIST_ADAPTER           =
*   IT_EXCEPT_QINFO                =
*   I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER        =
*   ES_EXIT_CAUSED_BY_USER         =
TABLES
    T_OUTTAB                       = IT_SCARR
* EXCEPTIONS
*   PROGRAM_ERROR                  = 1
*   OTHERS                         = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
EXPORTING
*    BIN_FILESIZE              =
    FILENAME                  = 'C:\Documents and Settings\sap\Desktop\Hi.xls' " Change path
*    FILETYPE                  = 'ASC'
*    APPEND                    = SPACE
*    WRITE_FIELD_SEPARATOR     = SPACE
*    HEADER                    = '00'
*    TRUNC_TRAILING_BLANKS     = SPACE
*    WRITE_LF                  = 'X'
*    COL_SELECT                = SPACE
*    COL_SELECT_MASK           = SPACE
*    DAT_MODE                  = SPACE
*    CONFIRM_OVERWRITE         = SPACE
*    NO_AUTH_CHECK             = SPACE
*    CODEPAGE                  = SPACE
*    IGNORE_CERR               = ABAP_TRUE
*    REPLACEMENT               = '#'
*    WRITE_BOM                 = SPACE
*    TRUNC_TRAILING_BLANKS_EOL = 'X'
* IMPORTING
*    FILELENGTH                =
CHANGING
    DATA_TAB                  = IT_SCARR
* EXCEPTIONS
*    FILE_WRITE_ERROR          = 1
*    NO_BATCH                  = 2
*    GUI_REFUSE_FILETRANSFER   = 3
*    INVALID_TYPE              = 4
*    NO_AUTHORITY              = 5
*    UNKNOWN_ERROR             = 6
*    HEADER_NOT_ALLOWED        = 7
*    SEPARATOR_NOT_ALLOWED     = 8
*    FILESIZE_NOT_ALLOWED      = 9
*    HEADER_TOO_LONG           = 10
*    DP_ERROR_CREATE           = 11
*    DP_ERROR_SEND             = 12
*    DP_ERROR_WRITE            = 13
*    UNKNOWN_DP_ERROR          = 14
*    ACCESS_DENIED             = 15
*    DP_OUT_OF_MEMORY          = 16
*    DISK_FULL                 = 17
*    DP_TIMEOUT                = 18
*    FILE_NOT_FOUND            = 19
*    DATAPROVIDER_EXCEPTION    = 20
*    CONTROL_FLUSH_ERROR       = 21
*    NOT_SUPPORTED_BY_GUI      = 22
*    ERROR_NO_GUI              = 23
*    others                    = 24
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
EXPORTING
    DOCUMENT               = 'C:\Documents and Settings\sap\Desktop\Hi.xls' "Change path
*    APPLICATION            =
*    PARAMETER              =
*    DEFAULT_DIRECTORY      =
*    MAXIMIZED              =
*    MINIMIZED              =
*    SYNCHRONOUS            =
*    OPERATION              = 'OPEN'
* EXCEPTIONS
*    CNTL_ERROR             = 1
*    ERROR_NO_GUI           = 2
*    BAD_PARAMETER          = 3
*    FILE_NOT_FOUND         = 4
*    PATH_NOT_FOUND         = 5
*    FILE_EXTENSION_UNKNOWN = 6
*    ERROR_EXECUTE_FAILED   = 7
*    SYNCHRONOUS_FAILED     = 8
*    NOT_SUPPORTED_BY_GUI   = 9
*    others                 = 10
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to write the Business Process

Can anybody please give me the link on How to write the Business Process for <b>IC_C03</b>... we have done the blue print and going to write the documentation for this info provider.
So please provide the related links..........

Probably the best thing to do is go to your boss/team lead/project manager/client contact and ask them what documentation they want you to produce and what should go in it. No-one here can guess at that.
Gareth.

How to write the regular expression for Square brackets?

Hi,
I want regular expression for the [] Square brackets.
I have tried to insert in the below code but the expression not validate the [] square brackets.
If anyone knows please help me how to write the regular expression for [] Square brackets.
private static final Pattern DESC_PATTERN = Pattern.compile("({1}[a-zA-Z])" +"([a-zA-Z0-9\\s.,_():}{/&#-]+)$");Thanks
Raghav

Since square brackets are meta characters in regex they need to be escaped when they need to be used as regular characters so prefix them with \\ (the escape character).

How to write the data into EEPROM using Labview?

How to write the data into EEPROM using Labview?

You would need some sort of EEPROM programmer. Typically might
communicate with it via serial. I don't know how you would do this in
LV. You would need to have the command protocol for the programming
device to start with.
Doug De Clue
gpibssx wrote in message news:<[email protected]>...
> How to write the data into EEPROM using Labview?

How to write the jndi lookup for ejb using oc4j server in jdeveloper

Hi All,
i am new to the JDeveloper. i want to develop the session bean in JDeveloper using the OC4J server. how to write the jndi lookup in cllient. what are the xml files need to deploy the application. where can i mention the JNDI name in xml file. so please provide the information as soon as possible.
regards
ram

There is quite in-depth information in the Enterprise JavaBeans Developer's Guide.
Section 2 (Understanding EJB Application Development) explains the xml files needed and Section 29 (Accessing an EJB from a Client) explains how to do a JNDI lookup.
Hope this helps.

How to write the ABAP code for Datasource Enhancment

Hi Team,
Can you please help me how to write the code for the enhancement i have made to the standard datasource
i have added the fields ZZPayer and ZZPayer_access.
I just wanted to know how to write the ABAP code to populate the data for these fields.
Regards,
Pradeep P.

Hi
From a performance point of view would like to suggest a few changes :
WHEN '<DS name>'.
select zzfields from <table> into itab
for all entries in c_t_data where <condition>.
If sy_subrc = 0.
loop at c_t_data assiging f_c_t_data.
read itab into wa_itab where key = f_c_t_data-key.
f_c_t_data-zzfield = wa-itab-zzfield.
endloop.
refresh itab.
regards,
aparna
endif.

How to write the CMD command for restarting all obi services?

Hi Experts,
BIEE:11.1.1.6
How to write the CMD command for restarting all obi services automatically by windows task scheduler?
I am try to write the code as below, but it does not work. Please help me to review it and check what I am missing.Thanks.
Or is there any better method for solving my requirement ? Please share me.Thanks very much.
cd C:\InstallPath\OBIEE\instances\instance1\bin
opmnctl stopall
opmnctl startall
I am facing the problem that it does not excute the 'opmnctl startall' code, which will be stopped after 'opmnctl stopall',
So how to modify the command ?Thanks

See if any of the these are useful or solves your query -
4.5.2 Using a Windows Service to Start and Stop System Components
http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/components.htm#BABEEAAI
4.5.3 Using the Oracle BI Systems Management API to Programmatically Start and Stop Oracle Business Intelligence
http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/components.htm#BABFGICA
Edited by: Abhi on May 8, 2013 4:44 AM

How to write the java program to retrieve the last 7 days dates

Hi,
I am having requirement that how to write the java program to retrieve the last 7 days dates. Please help me.
Regards,
Ahamad

It needs any jar file.Of course!
I did using jscape.My program is running fine.But it
requires jar file.Which is licensed version.Maybe you should follow the link the the 'license' on the site I posted!
>
I have the doubt is apache provides jar file free
versionMaybe you should follow the link the the 'license' on the site I posted!

How to write the start routine in the transformations ?

Hi Experts,
I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
*DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
So Let me know if anyone can help me how to write the ABAP code in the start routine.
Thanks
sekhar

Hi Experts,
I am working on BI 7, As I want to write a start routine in transformations of 0FIGL_O02 DSO, to allow the GL accounts with cost center data. Already there is a delete statement please find.
*DELETE SOURCE_PACKAGE where BAL_FLAG = 'X'. I had made comment to allow the G/L accounts. since I have some GL Accounts which does'nt have the cost center data, so in this case I have to write a ABAP code to allow this G/L accounts with cost center data.
So Let me know if anyone can help me how to write the ABAP code in the start routine.
Thanks
sekhar

Hai friends after read,how to write the modify stmt

Similar Messages

Maybe you are looking for