Hai iam Iliyas . I try to restore ios 6.1.4 from ios7.0 but iam getting an error 3194 so how to fix this issue can any one help me plz....
Hai Iam Iliya. Iam facing a problem with my Iphone that i tryed to restore back to ios 6.1.4 using itunes but it's giving me an error like "iphone cound not be restore due to an internal erroe 3194" so can any one help to fix my problem.. plzzz.
You cannot go back to iOS 6. You have probably ruined your phone by trying to do that. We canno help you here. Sorry.
Similar Messages
-
When i try to install i tunes, it goes so far down the installation process and then comes up with a message ' could not access network location %APPDATA%\. I then retry and it comes up with the same message.
It also tells me i tunes needs 'Quick Time' to support the software. I have downloaded Quicktime from i tunes seperately and gone through the whole process again, only to get the same message.
Can anyone please help?These kind of messages can often be cleared by using the Microsoft Installer cleanup Utility.
Here is a method for cleanup of your old iTunes installation and reinstall.
== uninstall with cleanup ==
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Save the files on your PC.
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista or Win 7
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes. -
when we try to restore a iphone 3 sur Itunes and new Lion we have error 3194 can t restore this iphone what can i do ?
thanks for your kind help1. Update iTunes - latest version is 10.4.1.
2. Disable ALL security apps (firewall, antivirus/spyware) running on your computer.
3. Don't try to downgrade the iOS version. This isn't supported
4. If you EVER tried to hack thie phone or use apps like tinyumbrella, you may have to edit the hosts file on your computer to remove references to gs.apple.com
5. If your phone has been hacked (jailbroken, iOS downgrade, or unauthorized unlocking), you may not be able to restore the phone to Apple specs again.
"This device is not eligible for the requested build: Also sometimes displayed as an error 3194. If you receive this error, update to the latest version of iTunes. 3rd party security software or router security settings can also cause this issue, to resolve please follow Troubleshooting security software issues. Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod; follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. Also, using an older or modified .ipsw file can cause this error. Try restoring moving the current .ipsw file aside, or try restoring in a new user to ensure that iTunes downloads a new .ipsw."
http://support.apple.com/kb/TS3694
Message was edited by: modular747 -
HT4623 We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.----How to fix this issue while setting up the iphone for the new ios?
If you don't have a SIM card in the phone, you must put one in. It's required for activation.
If you do, then your phone was probably hacked to unlock it from the original carrier. Contact them and see if they will unlock it. If they will not do so, then you can't use that phone. -
My iPhone 5s on ios 8.1.2 is stuck at Apple logo or recovery mode.. To fix this issue, i need to update it to ios 8.2 through itunes.. I want to ask that my data i.e. Photos and other personal data would be removed after updating it or not..?
if yes then how can i save my data or get out of recovery mode.. Is there any safe mode or something like that on which i could access my data..
P.S. I have not taken any backup of my iPhone on itunes..
Please help me sort out this issue..Recovery mode doesn't mean that all your data is already lost. You only lose your data if you restore it.
When you plug the phone is into iTunes hold down the home button. iTunes may then give you the option JUST to update the software first. This should not get rid of any data.
However, if iTunes is only giving you the option to RESTORE and update, then you will lose your data I'm afraid.
Hope that helps! -
as title can any one help me thank you
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
Safari keeps crashing every time I try to open a link from a different application, i.e. Mail. The trouble report says that some problem occurs with libcooliris.dylib plug-in. Can any one help?
Thanks!Dear Linc,
Thank you for the advice, John Blanchard1 and Linc Davis
As suggested in your reference thread I removed "/Library/Printers/hp/PDEs/hpPostScriptPDE.plugin" and the problem has been resolved.
I am guessing the the plug-in for the hp printers got corrupted and effected every thing, or became unsuitable when I installed an Apple update. I would be most grateful if you can confirm how the problem was coursed so I can understand and learn from this experiance.
Ash -
Hello guys..!! I have got my new iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!
Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help. -
can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized its freeze iin display usb and itunes logo pls help me pls itried all the uninstall unknown device and reboot the ipod and restore pls help me thanks
Try the suggestions found here: http://www.apple.com/support/ipodtouch/assistant/itunes/
-
I purchased an album from iTunes using my desktop computer. All of the songs from the album are on my computer and play perfectly. When I try to sync the songs to my iPhone or iPad, I get an error message that says 3 of the songs can not be downloaded to these devices. Any ideas?
Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though
-
After updating to ios 7.0.4 my wallpaper is zoomed in, how to fix this issue?
After updating to ios 7.0.4 my wallpaper is zoomed in, how to fix this issue?
The wallpaper used to be sharp, and now it's just soft and zoomed in. No matter what size the wallpaper is.
Also, i tried to turn to turn off the "reduced motion setting' it DID NOT SOLVE the problem.
I need help please! So frustartaing!It's not possible to zoom out. Not that I know of anyway. Sorry! However, you can screenshot your picture to fit it to your screen size. Hope it helps.
-
I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then i have to force quit so i lose my work. anyone know how to fix this issue?
What version of OS X are you using? If Yosemite, you need to update to 10.10.1 or higher.
In any case, start by going to the editor preferences>general, clicking this button and restarting the editor: -
when i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync options,how can i change that option,can any one help me.........?
I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
Thanks very much for your feedback. -
I have just updated my ipad mini with the new ios software and it has caused may ipads onboard keyboard to run very slowly does anyone no how to fix this issue
*Typing lag iOS 7*
Settings>General>Reset>Reset all settings. This should improve the typing responsiveness
*Note:* Settings, preferences, network settings, etc will be reset. *NO data or media will be lost*
and/or
Settings>iCloud>Documents and Data (turn it OFF) -
When I try to download free updates for apps, I've suddenly started getting an error message saying "You cannot update this software since you have not owned the major version of this software".
But I HAVE owned the software, for ages. (And, in any case, the apps in question are all free.)
And I don't have multiple Apple IDs.
What can I do?
Any advice much appreciatedThis can occur if you bought the machine used and iLife was reinstalled with another AppleID.
This also can occur if the "free apps" you downloaded have paid upgraded versions and/or are now payware and you can't get updates.
All software from MAS is copy protected, it might be free as in "no charge" but it's not free in the sense you can share it with others.
Maybe you are looking for
-
No wireless connection - can't get it to work on Satellite Pro M40
Hi First Post So hope I get it right I have Sat Pro M40 A Desktop connected to Router via Ethernet Cable Laptop used in a different room with a wireless internet connection I guess this means I had a wireless network? Re-installed Win XP and Service
-
How can I keep my winform application running after logout
Dear developers, I have an application that insert or update Data to an SQL server every 2, 3 hours. I can't use the SQL server itself (creating a new job). Instead I defined a timer which executes the code every 3 hours. The application runs in the
-
Newbie to the Analytical Workspace Manager v. 11.1.0.7.0 and using Oracle Database 11g Enterprise Edition Release 11.1.0.6.0. Installed the global sample schema and associated objects. Created the workspace in AWM and I am able to see all cubes and d
-
What is the best practice to deploy the SharePoint site from test to production environment?
We are beginning to start a new SharePoint 2010 and 2013 development projects, soon developing new features, lists, workflows, customizations to the SharePoint site, customization to list forms and would like to put good practice (that will help in d
-
I have a IPad 4.3.5 and would like to upgrade to ios7 how do I do it?
I do not have a software update button on my general setting. Is this normal?