Hairless now and going completely crazy
I have posted this before but will try again. Trying to copy my audio (book) cd into itunes. I have: brought up itunes, put in cd, dismissed all dialog boxes (was told to do that by Aldoblog),selected all tracks (which were in contiguous and ascending order), chose advanced and.....join tracks is dimmed. WHY?????????????? It's not pretty here anymore....
Is this what you are doing?
http://docs.info.apple.com/article.html?path=iTunesWin/7.0/en/2597.html
What dialogue boxes are you dismissing? What do they say? Are they error messages?
Can you import the tracks by themselves, or is it not letting you do that either?
btabz
Similar Messages
-
hi
i got a few free app before and did not download them completely and dont want to do this
but they stay in my download list and start automatly when i connect to itunes store and going to crazy me
how can i remove them from my account for ever
please help me
thank youTry Here > https://discussions.apple.com/thread/4074945?tstart=0
-
Sometimes when just surfing Safari or playing world of warcraft, the mac starts repeating the last millisecond of sound and it locks up. This happens at least once a day. I've reinstalled Leopard 3 times already, and I still have the problems.
When I turn the computer off by holding down the restart button and boot it again, I get no error report message. I've only gotten an error report message twice, and when I checked the report it says "panic".
My warranty is running out, do you have any suggestions or should I just ship it to service right away?Ryum is running 10.5. Your issue may be due to installing 10.6.
Try posting in the Snow Leopard Usage forum.
DALE -
Flickers while starting up, and goes black
PB G4, 15-in screen. On start up, the screen begins to flicker, and goes completely black by the time the machine is fully running.
I've hooked an external display up to the PB, and it works just fine, so I'm thinking the graphics card is good. Bad LCD? Inverter? Opinions!After boot, shine a strong light on the dark screen, and see if you see the desktop faintly, or shine the light thru the Apple logo on the lid. If you see the faint desktop, then it should be the backlight that's bad. What is harder to determine is if it's the inverter or the lamps.
-
I just updated lightroom 5 and now it is completely gone from my computer!!! What the hell is going on and why can't I speak to someone at adobe.....ever???
You need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Lightroom
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care -
My iPad suddenly started to show crazy colors. I turned it off. It would not reboot until I used the two-button reboot. Now it shows only green stripes. only for a few seconds and goes back to sleep. HELP!
Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red to delete all apps from this list.
- Press the home button twice when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
I updated my iphone tonight and now my texting is crazy. When I text my daughter, the text comes to my iphone.
Hi sigrun from mo,
If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden -
I updated my Ipod Touch last night, it went through all the processes and said it complete - but now when I select any app - it flickers and goes back to the homescreen. Also, all my music/books are gone.
- First try resetting your iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then try downloading/installing a new app.
- iOS: Troubleshooting applications purchased from the App Store -
i am updating my iPhone4s with the most recent OS software update and its been almost 3 hrs now and it has not completed its update. It is still " verifying updated iPhone software. How long does it take for the update to be completed. Thanks
Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
Its a shame you have to go through what you going through.
Good Luck -
hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
(i correctly got out of dfu mode after the downgrade)
i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.Anyone have any suggestions? or is everyone else just as clueless as me !
-
its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.
If you have followed the standard Apple troubleshooting processes (see user guide )
probably a trip to the local Apple Store Genius bar is called for before warranty runs out
Assuming the iPad has been released in your Country if not you may have to take it to a
neighbouring Country where it is available
This page will tell you ,via the drop down menu Countries that can support iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d -
I have updated my iTunes to the latest edition and now my iTunes will not open saying MSVCR80.dll is missing from my computer and that i have to reinstall itunes. I have tried reinstalling twice now and this error message keeps appearing. What is going on?
Solving MSVCR80 issue and Windows iTunes install issues.
-
Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page. Is there any reason for this? I've been updating the app everytime and now it's not letting me in. Pls advise. Tq
Reset the device, restart the device, try downloading any other app.
All of these are basic steps that could have been found by a simple search of the forums as a resolution for the issue. -
I am running Mac OS X Lion on a brand new Mini. Every now and then, my keyboard goes "dead." The mouse still works but I can't type. If I restart, everything is fine again. Is there anything that will fix this problem?
Also, I am trying to connect my Mini from the mini-Displayport to the Displayport of my Dell U2410 monitor. The image is very grainy,even though it is set to the correct resolution: 1920 X 1200 at 60Hz. If I use HDMI to VGA input, the image is much clearer. Is there a way to get the Displayport to work?I'm having exactly the same keyboard issue. Certainly nothing has ever enhanced my concentration while coding like suddenly becoming unable to type.
I'm seeing a great many devicemgr and rake errors in my system log. I don't know if they're related. How 'bout you?
If you're unfamiliar with the system log…
Open /Applications/Utilities/Console.
If necessary, choose View > Show Log List.
system.log is at the top of the FILES section.
Try searching it for hot words like DEBUG, FATAL, and aborted.
I've found some discussions that would tend to indicate my errors are postGres related – I'm running OS X server.
-Bryan -
recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?
Check this thread out -> iTunes 10.4 & Multimedia Keyboard
It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
pikot wrote:
Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
- You need to open a text editor (like notepad) as an administrator.
- Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
- Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
- Save the file
- Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me)
Maybe you are looking for
-
CRM-Web UI-Filtering transaction types based on Workcenter
Hi, I have the following requirement: There are 2 Business roles and these have their separate navigation bar profile.But the 2 navigation bar profile have the same workcenters assigned. Now the requirement is when the user logs on with Business role
-
Best Wireless Auth. methods ACS 3.2(3) and AD
I am new with ACS and wirless authentication. Have just deployed my ACS 3.2 for Windows, and am trying to select the best methods of authentication for my invironment. I have determined my risk level to be low to medium. I would consider MAC based Au
-
Can you please provide the .csv files used in Power BI Getting Started Guide
Hi Team, I am exploring the Power BI app developed by Microsoft on My Windows 8 machine For that I found the Getting started guide from the below link http://office.microsoft.com/en-in/excel-help/power-bi-getting-started-guide-HA104103589.aspx?CTT=5&
-
I am using an airport Extreme base station, and I am trying to enable Port forwarding for use with a Slingbox. However, when I go to the port mapping tab of the Airport Admin Utility the "Add" button (right side of the window) is grayed out. Can anyo
-
i m a macbook pro !3 inch user...my mac is frozen on start up screen....do u have ny idea how to get rid of it!!!!!