Hairline Frame Borders

The attached InDesign file shows some white hairline borders on some of the frames, even though the border size is set to 0. When I export the file as a jpg, these hairlines are still visible. If I export the file as a pdf, the hairlines are not there.
What is causing this? What can I do so that these hairlines are not visible on jpg as well as pdf exports?

There is an issue in PostScript of use of the specification
0 setlinewidth
and the equivalent specification in PDF. This is a special case which is not supposed to be used to specify a line of zero width, but rather, a line width of one device unit. Thus, on a low resolution 300 dpi laser printer it would yield a line width of 1/300" but on a 4800 dpi imagesetter it would yield a line width of 1/4800".
As far as I know, no Adobe applications have ever output PostScript or PDF like this. When a line width of zero is specified within Adobe applications, no line is drawn at all (the "0" is not interpreted as the width of the line yielding a true hairline). That doesn't mean that Adobe applications prohibit you from producing content with very, very, narrow lines - that is what "Live PreFlight" and Acrobat Preflight is for!
The only source, other than handcrafted PostScript or PDF, that we have seen over the years of 0 setlinewidth has been AutoCAD via its own internal PostScript and EPS generator, typically causing havoc when printed on high resolution devices and/or placed inside other documents.
I haven't looked at the source of the JPEG and PDF provided here, but it is more likely to be "stitching" problems rather than an attempt by InDesign to draw a zero width line. I'll try to dig into this one later.
- Dov

Similar Messages

Image frame borders

What I'm trying to do is overlap photos in Indesign with a black border (no problem there) but on the overlapping areas I'd like a white border around the black border to add some depth- is there a way to apply two borders to a frame? or do I have to create a white box and put it behind the image?

In the Stroke panel, select Stroke Styles from the flyout menu. Click New. Choose Stripe from the Type pop-up menu. Play with the arrows on the left until you have a thick black stroke starting at about 20%. Names the style and click OK, then click OK again. Use that style. You'll need to pick Paper as the gap colour in the Stroke panel.

Smaller problem with handling frame-borders in dreamweaver 8

Hello people
I have build a website using a frameset in dreamweaver 8.
Ewerything works fine, except i cannot drag in my frames when i
re-open the page. I try to select frames in the "windows" bar, and
click on the different frames to make the frame-border appear, but
it does not. Only dotted lines that indicate the selected frame
appear.
mabe there is a button somewhare that make the draggeble
borders come back..
if anybody knows the anwser to my problem - please write.
Thanks
Daniel - Copenhagen

> I have build a website using a frameset in dreamweaver
8.
Why? Are you familiar with all the problems associated with
choosing frames
for you layout?
> except i cannot drag in my frames when i re-open the
page
Hmm - I don't understand this. You have created a frameset
page in which
you define your frames, right? And you have saved both the
frame pages, and
the frameset page, right? So, you next open which page? The
frameset? Or
the frame page?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"duranduranduran" <[email protected]> wrote
in message
news:glk8uh$noc$[email protected]..
> Hello people
>
> I have build a website using a frameset in dreamweaver
8. Ewerything works
> fine, except i cannot drag in my frames when i re-open
the page. I try to
> select frames in the "windows" bar, and click on the
different frames to
> make
> the frame-border appear, but it does not. Only dotted
lines that indicate
> the
> selected frame appear.
> mabe there is a button somewhare that make the draggeble
borders come
> back..
>
> if anybody knows the anwser to my problem - please
write.
>
> Thanks
>
> Daniel - Copenhagen
>
>

Clip Art, Picture Frames, Borders, etc...

I was wondering if there is a place where you can get clip art, more picture frames and cool borders for Pages 08?
Thanx
Joe

I'm afraid you're looking completely in the wrong place. PS doesn't produce instant galleries, it is a full-blown professional image editing app. Hence there is no such thing as decorative borders, clip art and what have you. Of course al lof that can be added with PS in a million ways like patterns, shape brushes or by using text with dingbats, but it's not prefab stuff. And "easy" is very much a matter of perception and experience, but from what it sounds like, you wil lbe much happier with Photoshop Elements or similar products from otehr vendors...
Mylenium

Can you change the frame colors in the .chm file?

In RoboHelp 8, HTML Help Output with .chm deliverable, is it possible to change the color of the frame borders?

Hi there
I'd say it depends on what you are referring to. Some influence is there but not much. Which "Frame" is it? Can you post a screen capture pointing out what you hope to change?
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Using Keynote Cool Picture Frames between Apps

Hi - is there a way to grab the "Keynote" picture frames/borders for use in other apps. I can't seem to find them even when I show contents of the "keynote" package.
Thanks for any and all help:)
Shelley

iMovie is a DV editing app and the final results would still make a 640X480 file.
I would change a few things to make everything work together:
First is the display resolution. You want the 23 inches to be used so just reduce the display preferences to try and match your QuickTime file. 800X600 sounds about right but larger will still work as H.264 Video scales up in size very nicely.
This would force you to "reduce" the dimensions of the Keynote file but that shouldn't be much of an issue.
QuickTime Pro could also be used to "change" the dimensions of the 640X480 file. Again, H.264 scales up in size and would look pretty good at even double size.
The goal is to have them both at the same dimension and then match the monitor resolution.
Easier to change the display than the files.

Borders in Matrix with Group Report Missing in Web view

Please help.
I have a matrix with group report. When it is viewed in Report Builder live preview is fine, but when I preview in web I got two problem
Problem 1 - preview as HTML
No borders? all my cell borders, frame borders gone missing.
Problem 2 - preview as HTML CSS
The borders are there, but some data in the matrix report displayed wrongly.
For example, the data is "01 APR 2000 1800 - 20 APR 2000 2000", what is showing in the web view is actually
"01"
"APR"
2000
1800
i.e., is broken down into few lines.
Can anyone please help. Btw I am using Oracle Report 6i.
Thanks.
Joshua

For Simple HTML output, you can only get horizontal lines out of Reports. You will lose all vertical lines as well as other graphical objects (eg: polygons, polylines, etc.) This is because these objects are not supported natively within HTML.
However, for HTMLCSS, you should be able to get a lot closer since rectangles are supported. Though again; polygons, polylines, etc. are not supported.
Not sure what is happening to your text, possibly an issue with browser settings or you may need to reduce the font size in Reports to get what you want.
As has already been suggested, for better WYSIWYG output for the web from Reports, PDF is the way to go.

To group images with created text frame and apply label for it...

Hi Everyone,
We are currently working in auto figure placements for CS3. I have placing the figures into the document. Then i am creating figure caption text frames below the images. Here the concern is i need to group these image and the text box. After this i have to place these images with captions into corresponding pages where the figures have been cited. Also suggest me how to place these images in center of the page as well as in top or bottom of the page margin.
Can anyone help me for this. Your help will be much appreciated.
Below is my modified script,
var myPage;
main();
function main(){
    var myFilteredFiles;
    app.scriptPreferences.userInteractionLevel = UserInteractionLevels.interactWithAll;
    myExtensions = [".jpg", ".jpeg", ".eps", ".ps", ".pdf", ".tif", ".tiff", ".gif", ".psd", ".ai"]
    var myFolder = Folder.selectDialog("Select the folder containing the images", "");
    if(myFolder != null){
            if(File.fs == "Macintosh"){
                myFilteredFiles = myMacOSFileFilter(myFolder);
            else{
                myFilteredFiles = myWinOSFileFilter(myFolder);
            if(myFilteredFiles.length != 0){
                for (j=0; j<myFilteredFiles.length; j++){
                    var myImages = myFilteredFiles[j];
                    citePage(j);
                    app.activeDocument.pages.item(myPage.name).place(myImages);
                    alert("Done!");
function myMacOSFileFilter(myFolder){
    var myFilteredFiles = myFolder.getFiles(myFileFilter);
    return myFilteredFiles;
function myFileFilter(myFile){
    var myFileType = myFile.type;
    switch (myFileType){
        case "JPEG":
        case "EPSF":
        case "PICT":
        case "TIFF":
        case "8BPS":
        case "GIFf":
        case "PDF ":
            return true;
            break;
        default:
        for(var myCounter = 0; myCounter<myExtensions.length; myCounter++){
            var myExtension = myExtensions[myCounter];
            if(myFile.name.indexOf(myExtension)>-1){
                return true;
                break;
    return false;
//To find cited pages
function citePage(myInst){
    app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.NOTHING;
    app.findGrepPreferences.findWhat="(?<=Figure \\d\\.)\\d";
    var myFind=app.findGrep(false);
    myPage = myFind[myInst].characters.item(0).parentTextFrames[0].parent;
    return myPage.name;
Thanks Regards
Thiyagu

The shadow effect has to have something to be applied on, but by default text frames borders and fills are invisible.
If you set the border of your frame to a color & thickness, you'll see it gets a shadow of its own, independent of the text. (Try it with dotted and dashed lines!)
Additionally, if you set the fill of your text frame to a solid color, you'll see the single solid shadow you were expecting.

Creating jagged image borders

Hello, I am creating an image border using the rectangle marquee, and making it jagged by applying a Stylize > Wind filter to it.
Using Wind there is no way to adjust the jagged edges, is there any kind of third party plugin that gives me more editing features?

I have used auto-fx edges to do what you want. there are literally hundreds of edge effects,but it is not the fastest software i have ever used. large files take a while to render the effect, but they may have gotten better. here is a link.
http://www.photoshopsupport.com/tools/plugins/photo-frames-borders-edges.html

How to select a text frame that has been "Sent to Back"?

Hi Framers,
In FM 7.2 (all patches up to date, running on Windows XP Pro), I added a note inside a text frame next to an anchored frame holding an image. I nudged the text frame close to the image but it blocked out a tiny portion of the image. So I selected the text frame and from the Graphics menu clicked Send to Back. Solved that problem, of course. Now I want to change the wording in the note but can't do it because the entire text frame has been sent to back -- how can I select it to Bring to Front so I can edit its contents???
This MUST be something totally obvious, right? Can I plead pre-holiday brain freeze?
TIA,
Gay

galson wrote:
Hello again, Sheila ;~)
I selected all and moved my cursor all around the page (around various pages, actually, since Ctrl+A selects the entire chapter), and I see what you mean by the color of the arrow's head changing between black and white. Is it significant that the ONLY time it's black is when I'm outside the frame of the page itself? (That is, in the white, non-editable space around the actual frame borders on the page.) Clicking anywhere, whether inside or outside the active area, deselects everything.
HOLD THE PRESSES! Even though I *knew* I hadn't grouped my text frame with anything else, after reading your suggestion, I selected the page frame to make sure I hadn't somehow grouped it with my text frame: I hadn't -- but then, on a hunch, I sent IT (the page frame) to the back -- now I can select the text frame!
I'm marking your response as answering my question and I'm also going to try to mark Peter's the same way, because each of you in your own way, helped me resolve this problem.
Thank you both and HAPPY HOLIDAYS! (Gee, and I didn't get either of you anything... maybe next year ;~))
Gratefully,
Gay
Hi, Gay:
The "I-Beam" pointer tool is called the Smart Pointer, because it changes to an I-beam when it's over text, and to the Graphics Pointer tool when over a graphic, or part of a graphic, or when you press Ctrl. It's easy to select the main text frame when you Ctrl+click on its interior text area inadvertently, when you're trying to select an anchored frame edge, or when you use Ctrl+A to select all. It's frustrating to have some of these unintended events happen when you're not expecting them. Always work with View > Borders ON, to display the edges of objects and reduce confusion, and always watch where you click. You can zoom iin to large magnification to see things better.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Reg : types of frame border types for templates or windows.

Hi,
I have a doubt. In smartforms, is there any possibility of different types of border styles for templates and windows other than the straight single line? In the sense, as we see in MS Word, I was trying for dashed or dotted pattern of frame borders to templates in my smartform, but could not find it. Can you please clear my doubt.
Thanks and Regards,
Krishna.

Hi,
I got your problem . But see in smartform only stright line border is possible.if u want to design different borders u have to go for ADOBE FORMS .There you can find for more designs for borders.
All the drawbacks of the smartforms are overcomed in Adobeforms.In adobeforms you can get the form in PDF.
Regards,
Anvesh Gummadapu.

The new "Show and hide frame edges" is buggy and needless.

i have a card layout design and its irritating to see the blue outline on every block.Morever it doesnt even hide if i give any stroke.why do i need to preview everytime to see the real design.

Buggy and needless? You are sure, you use them correctly?
If you hide frame edges, they are hidden until you hover over an object. In this case, frame borders of this single object are temporarily displayed. This is working perfectly here.
What is not working on your machine? And why this is "useless"?

Bordered rectangles appearing throughout desktop

I have a strange problem that I haven't encountered before. So far, it doesn't seem to be causing performance problems, except for a Finder restart that may or may not be associated with it, but is more a distraction since I'm a graphic designer and need to have a clean workspace for precise work.
First, when I click somewhere in the Finder or an application, I get a rectangle with a thick black border appearing where I click. The thick black border is surround on the outside and inside by hairline white borders. For example, if I click on a desktop folder, that folder will be surrounded by the rectangle. If I click, for example, on a Safari window the back arrow button will be surrounded by the rectangle.
In the Finder, under the Apple, I also have Restart, Shutdown, and Log Out showing up twice respectively, except one of each will be followed by ...
I'm using a-
Dual 2.7 GHz PowerPC G5
Memory- 2 gb DDR SDRAM
OS 10.4.8
I'm wondering if the most recent Security 2006-008 (PowerPC) update may have something to do with it. This was downloaded 12/27 and the problem started the next day.

Welcome to Apple Discussions!
You probably hit the macro key to enable Universal Access by mistake:
http://docs.info.apple.com/article.html?artnum=303070

After updating to 10.10.2, my OpenGL applications do not work, and there are problems with window updates/refresh in App Store, and many applications, Google Chrome is unusable.

After performing the OS X 10.10.2 update, OpenGL applications, for example Starry Night Pro fail to run, there are numerous windows update/refresh problems (incomplete refresh, remnants of window/frame borders), and some applications, for example Google Chrome are unusable, as cursor motion in the application window causes the display to flash horizontal bars in the window.
I've tried a variety of things, including downloading the most current release of Xcode, turning on/off transparency in Accessibility, graphics switching, and a few other things, but the problem persists.
The App Store display behaves similarly. I am running a MacBook Pro.
This is the output from EtreCheck:
Problem description:
Screen/windows corruption
EtreCheck version: 2.1.8 (121)
Report generated March 11, 2015 at 10:26:15 PM CDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
    MacBook Pro - model: MacBookPro9,1
    1 2.6 GHz Intel Core i7 CPU: 4-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 36
Video Information: ℹ️
    Intel HD Graphics 4000
    NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
    OS X 10.10.2 (14C1510) - Time since boot: 23:26:45
Disk Information: ℹ️
    APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 748.96 GB (146.71 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 749.30 GB Online
    HL-DT-ST DVDRW GS31N
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple iPod
    Western Digital My Book 1 TB
        EFI (disk3s1) <not mounted> : 210 MB
        WDP1 (disk3s2) /Volumes/WDP1 : 333.40 GB (9.12 GB free)
        WDP2 (disk3s3) /Volumes/WDP2 : 333.40 GB (2.55 GB free)
        WDP3 (disk3s4) /Volumes/WDP3 : 332.79 GB (94.00 GB free)
    Western Digital My Book 1140 2 TB
        EFI (disk4s1) <not mounted> : 210 MB
        2TB_1 (disk4s2) /Volumes/2TB_1 : 666.79 GB (31.36 GB free)
        2TB_2 (disk4s3) /Volumes/2TB_2 : 666.79 GB (58.76 GB free)
        2TB_3 (disk4s4) /Volumes/2TB_3 : 666.18 GB (70.41 GB free)
    Logitech USB Receiver
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
    Logitech USB Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Anywhere
Kernel Extensions: ℹ️
        /Applications/Parallels Access.app
    [loaded]    com.parallels.virtualsound (1.0.36 36 - SDK 10.6) [Click for support]
        /Applications/Parallels Desktop.app
    [not loaded]    com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Click for support]
    [not loaded]    com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Click for support]
        /Applications/Utilities/DiskWarrior.app
    [not loaded]    com.alsoft.Preview (4.1) [Click for support]
        /Library/Extensions
    [loaded]    com.epson.driver.EPSONProjectorUDAudio (1.40 - SDK 10.6) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) [Click for support]
    [loaded]    com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) [Click for support]
    [loaded]    com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) [Click for support]
    [not loaded]    com.Ralink.driver.RT73 (1.1.6) [Click for support]
    [not loaded]    com.beceem.BeceemAppleWiMAXAdapter (5.2.56d16) [Click for support]
    [not loaded]    com.cisco.nke.ipsec (2.0.1) [Click for support]
    [not loaded]    com.devguru.driver.DIFMCDFree (1.1.0) [Click for support]
    [not loaded]    com.devguru.driver.DIFMSerial (1.1.0) [Click for support]
    [not loaded]    com.fklt.driver (1.8.0) [Click for support]
    [not loaded]    com.novatelwireless.driver.3G (2.2.8) [Click for support]
    [not loaded]    com.novatelwireless.driver.DisableAutoInstall (1.2) [Click for support]
    [not loaded]    com.prolific.driver.PL2303 (2.0.0) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.39) [Click for support]
    [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) [Click for support]
    [not loaded]    com.sbig.driver.SBIGUSBEDriver (4.70) [Click for support]
    [not loaded]    com.sbig.driver.SBIGUSBLoader (4.70.2) [Click for support]
    [not loaded]    com.sierrawireless.driver.SierraDevSupport (2.0.6) [Click for support]
    [not loaded]    com.sierrawireless.driver.SierraFSCSupport (2.0.6) [Click for support]
    [not loaded]    com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Click for support]
    [not loaded]    com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) [Click for support]
    [not loaded]    org.emul.driver.EarthMate (1.0.0d1) [Click for support]
        /System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
    [not loaded]    com.novatelwireless.driver.3GData (2.2.8) [Click for support]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    [not loaded]    com.canon.MFManager.plist [Click for support]
    [loaded]    com.divx.dms.agent.plist [Click for support]
    [loaded]    com.divx.update.agent.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.kodak.BonjourAgent.plist [Click for support]
    [running]    com.Logitech.Control Center.Daemon.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Click for support]
    [running]    com.wacom.wacomtablet.plist [Click for support]
    [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
    [running]    com.adobe.adobeupdatedaemon.plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.autodesk.backburner_manager.plist [Click for support]
    [running]    com.autodesk.backburner_server.plist [Click for support]
    [loaded]    com.autodesk.backburner_start.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [running]    com.makerbot.conveyor.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.parallels.mobile.dispatcher.launchdaemon.plist [Click for support]
    [loaded]    com.parallels.mobile.kextloader.launchdaemon.plist [Click for support]
    [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
    [loaded]    com.kodak.KODAK AiO Firmware Updater.plist [Click for support]
    [loaded]    com.kodak.KODAK AiO Software Updater.plist [Click for support]
    [running]    com.parallels.mobile.startgui.launchagent.plist [Click for support]
    [loaded]    com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
    Google Drive    Application (/Applications/Google Drive.app)
    USB Display Agent    Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
    USB Display Agent    Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
Internet Plug-ins: ℹ️
    WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
    OVSHelper: Version: 1.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    Google Earth Web Plug-in: Version: 6.0 [Click for support]
    SlingPlayer: Version: Unknown [Click for support]
    RealPlayer Plugin: Version: Unknown [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 6.0
    WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
    AdobePDFViewer: Version: 9.5.5 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 40 Check version
User internet Plug-ins: ℹ️
    fbplugin_1_0_3: Version: Unknown [Click for support]
    BrowserPlus_2.6.0: Version: 2.6.0 [Click for support]
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    fbplugin_1_0_1: Version: Unknown [Click for support]
    Picasa: Version: 1.0 [Click for support]
Safari Extensions: ℹ️
    Open in Internet Explorer
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    GoPro [Click for support]
    Growl [Click for support]
    Java [Click for support]
    Logitech Control Center [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 748.96 GB Disk used: 602.25 GB
    Destinations:
        WDP3 [Local]
        Total size: 332.79 GB
        Total number of backups: 2
        Oldest backup: 2013-04-03 12:26:32 +0000
        Last backup: 2013-04-03 12:26:32 +0000
        Size of backup disk: Too small
            Backup size 332.79 GB < (Disk used 602.25 GB X 3)
        STAR_TECH_EXT [Local]
        Total size: 499.76 GB
        Total number of backups: 2
        Oldest backup: 2013-04-03 14:26:44 +0000
        Last backup: 2013-04-03 14:26:44 +0000
        Size of backup disk: Too small
            Backup size 499.76 GB < (Disk used 602.25 GB X 3)
Top Processes by CPU: ℹ️
         3%    WindowServer
         1%    Creative Cloud
         0%    firefox
         0%    fontd
         0%    AdobeUpdateDaemon
Top Processes by Memory: ℹ️
    670 MB    Safari
    567 MB    firefox
    464 MB    softwareupdated
    395 MB    mds_stores
    309 MB    WindowServer
Virtual Memory Information: ℹ️
    1.43 GB    Free RAM
    7.87 GB    Active RAM
    6.40 GB    Inactive RAM
    1.47 GB    Wired RAM
    7.30 GB    Page-ins
    205 KB    Page-outs
Diagnostics Information: ℹ️
    Mar 11, 2015, 04:04:23 PM    /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-160423_[redacted]. cpu_resource.diag [Click for details]
    Mar 11, 2015, 02:54:29 PM    /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-145429_[redacted]. cpu_resource.diag [Click for details]
    Mar 11, 2015, 10:18:18 AM    /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-101818_[redacted]. cpu_resource.diag [Click for details]
    Mar 10, 2015, 10:55:10 PM    Self test - passed
    Mar 9, 2015, 03:21:58 AM    /Library/Logs/DiagnosticReports/SubmitDiagInfo_2015-03-09-032158_[redacted].cpu _resource.diag [Click for details]

Here is the diagnostic script output:
Start time: 12:06:12 03/14/15
Revision: 1290
Model Identifier: MacBookPro9,1
System Version: OS X 10.10.2 (14C1510)
Kernel Version: Darwin 14.1.0
Time since boot: 3 days 13:11
UID: 502
Memory
    BANK 0/DIMM0
      Size: 8 GB
      Speed: 1600 MHz
      Status: OK
      Manufacturer: 0x859B
    BANK 1/DIMM0
      Size: 8 GB
      Speed: 1600 MHz
      Status: OK
      Manufacturer: 0x859B
USB
    Hub (Belkin Corporation)
    My Book 1140 (Western Digital Technologies, Inc.)
    My Book (Western Digital Technologies, Inc.)
    USB Receiver (Logitech Inc.)
    USB Receiver (Logitech Inc.)
FileVault 2: On
Activity
    CPU: user 13%, system 7%
CPU usage (%)
    plugin-container (UID 502): 100.0
    com.apple.WebKit (UID 502): 26.2
File opens (per sec)
    AdobeUpdateDaem (UID 0) => /tmp/UUID_OUT (status 60): 6
Energy (lifetime)
    WindowServer (UID 88): 7.44
    com.apple.WebKit.WebContent (UID 502): 7.22
Energy (sampled)
    plugin-container (UID 502): 99.13
    com.apple.WebKit.WebContent (UID 502): 23.60
    WindowServer (UID 88): 21.29
    com.apple.WebKit.WebContent (UID 502): 13.16
    Console (UID 502): 12.28
Memory (MB)
    kernel_task (UID 0): 1327
Font issues: 1
Listeners
    launchd: ftp
System caches/logs
    3.6 GiB: /System/Library/Caches/com.apple.coresymbolicationd/data
Diagnostic reports
    2015-02-19 com.apple.WebKit.WebContent crash
    2015-02-20 Topaz Adjust 5 crash
    2015-02-20 Topaz ReStyle crash
    2015-02-20 com.apple.WebKit.WebContent crash x2
    2015-02-21 com.apple.WebKit.WebContent crash x2
    2015-02-25 com.apple.WebKit.WebContent crash
    2015-03-04 system_profiler crash
    2015-03-07 com.apple.WebKit.WebContent crash
    2015-03-08 MPEG Streamclip hang x2
    2015-03-08 com.apple.WebKit.WebContent crash
I/O errors
    disk2s2: close: journal 0xffffff8049bb9c20, is invalid. aborting outstanding transactions 1
    disk2s2: do_jnl_io: strategy err 0x6 1
    disk2s3: close: journal 0xffffff8049bb9740, is invalid. aborting outstanding transactions 1
    disk2s3: do_jnl_io: strategy err 0x6 1
    disk2s4: close: journal 0xffffff8049bb9260, is invalid. aborting outstanding transactions 1
    disk2s4: do_jnl_io: strategy err 0x6 1
    disk3s2: do_jnl_io: strategy err 0x6 1
    disk3s3: close: journal 0xffffff8049bb95a0, is invalid. aborting outstanding transactions 1
    disk3s3: do_jnl_io: strategy err 0x6 1
    disk3s4: close: journal 0xffffff8049bb9400, is invalid. aborting outstanding transactions 1
    disk3s4: do_jnl_io: strategy err 0x6 1
    disk4s3: close: journal 0xffffff8023522c20, is invalid. aborting outstanding transactions 1
    disk4s3: do_jnl_io: strategy err 0x6 1
Volumes
    disk1: /
    disk5s3: /Volumes/WDP2
    disk5s2: /Volumes/WDP1
    disk5s4: /Volumes/WDP3
    disk6s2: /Volumes/2TB_1
    disk6s4: /Volumes/2TB_3
    disk6s3: /Volumes/2TB_2
    disk7s2: /Volumes/Starry Night Pro 7
HID errors: 3
Kernel log
    Mar 8 17:08:19 firefox (map: 0xffffff80501790f0) triggered DYLD shared region unnest for map: 0xffffff80501790f0, region 0x7fff8a200000->0x7fff8a400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    Mar 8 17:08:59 firefox (map: 0xffffff8051e54870) triggered DYLD shared region unnest for map: 0xffffff8051e54870, region 0x7fff8a200000->0x7fff8a400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    Mar 9 08:11:09 jnl: disk2s4: close: journal 0xffffff8049bb9260, is invalid. aborting outstanding transactions
    Mar 9 08:11:09 jnl: disk3s4: close: journal 0xffffff8049bb9400, is invalid. aborting outstanding transactions
    Mar 9 08:11:09 jnl: disk2s3: close: journal 0xffffff8049bb9740, is invalid. aborting outstanding transactions
    Mar 9 08:11:09 jnl: disk3s3: close: journal 0xffffff8049bb95a0, is invalid. aborting outstanding transactions
    Mar 9 08:11:09 jnl: disk3s2: write_journal_header: error writing the journal header!
    Mar 9 08:11:09 jnl: disk2s2: close: journal 0xffffff8049bb9c20, is invalid. aborting outstanding transactions
    Mar 9 11:42:59 firefox (map: 0xffffff8031b5e780) triggered DYLD shared region unnest for map: 0xffffff8031b5e780, region 0x7fff89e00000->0x7fff8a000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    Mar 10 13:44:08 Limiting closed port RST response from 310 to 250 packets per second
    Mar 10 23:03:12 firefox (map: 0xffffff802a954780) triggered DYLD shared region unnest for map: 0xffffff802a954780, region 0x7fff90000000->0x7fff90200000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    Mar 10 23:20:37 Limiting icmp unreach response from 302 to 250 packets per second
    Mar 11 08:39:04 jnl: disk4s3: write_journal_header: error writing the journal header!
    Mar 11 08:39:04 jnl: disk4s3: close: journal 0xffffff8023522c20, is invalid. aborting outstanding transactions
    Mar 13 17:42:33 Limiting icmp unreach response from 428 to 250 packets per second
    Mar 13 17:42:34 Limiting icmp unreach response from 433 to 250 packets per second
System log
    Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128828
    Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128829
    Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128830
    Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128831
    Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
    /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
    Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
    /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
    Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
    /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
    Mar 14 09:32:27 com.apple.sbd: SOSCCThisDeviceIsInCircle SOSCCThisDeviceIsInCircle!! 7
    Mar 14 09:35:28 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 09:47:41 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Installer" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 09:50:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 09:52:55 WindowServer: WSGetSurfaceInWindow : Invalid surface 583724228 for window 1898
    Mar 14 10:09:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 10:09:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.WebKit.Plugin.64" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 10:09:48 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 10:09:49 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.WebKit.Plugin.64" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 10:09:55 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 10:10:08 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
    Mar 14 10:39:34 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=7 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29a29a pid=25591 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
    Mar 14 10:39:34 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=8 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29a29a pid=25591 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
    Mar 14 11:57:26 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=7 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29f29f pid=26088 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
    Mar 14 11:57:26 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=8 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29f29f pid=26088 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
launchd log
    Mar 8 17:07:46 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
    Mar 8 17:08:18 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.341, service = com.garmin.renu.service, error = 119: Service is disabled
    Mar 8 17:08:18 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.341, service = com.apple.photostream-agent, error = 119: Service is disabled
    Mar 9 11:41:23 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
    Mar 9 11:41:51 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.274, service = com.garmin.renu.service, error = 119: Service is disabled
    Mar 9 11:41:51 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.274, service = com.apple.photostream-agent, error = 119: Service is disabled
    Mar 10 22:48:48 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = imklaunchagent.14852, service = com.parallels.inputmethod.ParallelsIM.5712, error = 134: Service cannot load in requested session
    Mar 10 22:48:58 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = WacomTabletDriv.14813, service = com.wacom.WacomTouchDriver.183780, error = 134: Service cannot load in requested session
    Mar 10 22:48:59 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = prl_deskctl_age.14812, service = com.parallels.mobile.prl_deskctl_agent.220416.UUID, error = 134: Service cannot load in requested session
    Mar 10 22:48:59 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = WacomTabletDriv.14813, service = com.wacom.TabletDriver.184064, error = 134: Service cannot load in requested session
    Mar 10 22:56:21 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
    Mar 10 22:59:02 com.apple.xpc.launchd.user.502.100005.Aqua: Could not import service from caller: caller = otherbsd.340, service = com.garmin.renu.service, error = 119: Service is disabled
    Mar 10 22:59:02 com.apple.xpc.launchd.user.502.100005.Aqua: Could not import service from caller: caller = otherbsd.340, service = com.apple.photostream-agent, error = 119: Service is disabled
Loaded kernel extensions
    com.Logitech.Control Center.HID Driver (3.6.0)
    com.Logitech.Unifying.HID Driver (1.2.0)
    com.epson.driver.EPSONProjectorUDAudio (1.40)
    com.parallels.virtualsound (1.0.36 36)
System services loaded
    com.adobe.adobeupdatedaemon
    com.adobe.fpsaud
    com.apple.watchdogd
    com.autodesk.backburner_manager
    com.autodesk.backburner_server
    com.autodesk.backburner_start
    com.google.keystone.daemon
    com.makerbot.conveyor.daemon
    com.oracle.java.Helper-Tool
    com.oracle.java.JavaUpdateHelper
    com.parallels.mobile.dispatcher.launchdaemon
    com.parallels.mobile.kextloader.launchdaemon
    org.macosforge.xquartz.privileged_startx
System services disabled
    com.apple.security.FDERecoveryAgent
    com.apple.mtmd
    com.apple.mrt
    com.apple.mtmfs
Login services loaded
    com.GoPro.GoPro-Importer
    com.Logitech.Control Center.Daemon
    com.adobe.AAM.Scheduler-1.0
    com.adobe.ARM.UUID
    com.adobe.ARM.UUID
    com.adobe.ARM.UUID
    com.adobe.AdobeCreativeCloud
    com.apple.Safari
    - status: 78
    com.apple.mrt.uiagent
    com.citrixonline.GoToMeeting.G2MUpdate
    com.divx.dms.agent
    com.divx.update.agent
    com.google.keystone.system.agent
    com.kodak.BonjourAgent
    com.kodak.KODAK AiO Firmware Updater
    com.kodak.KODAK AiO Software Updater
    com.oracle.java.Java-Updater
    com.parallels.mobile.prl_deskctl_agent.launchagent
    com.parallels.mobile.startgui.launchagent
    com.valvesoftware.steamclean
    com.wacom.wacomtablet
    gldrvmond
    org.macosforge.xquartz.startx
Global login items
    /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
    /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
User login items
    Google Drive
    - /Applications/Google Drive.app
    USB Display Agent
    - /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
    USB Display Agent
    - /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
User crontab
    #SqzS VERSION = 1.0.0
    #SYMANTEC SCHEDULER CRON ENTRIES. THESE ENTRIES ARE AUTOMATICALLY GENERATED
    #PLEASE DO NOT EDIT.
    # Enc=1 Name="Update Virus Protection" EvType1=1 EvType2=0 Sched=2
    0 8 * * 5 "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" 1 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" "    " "oapp" "aevt" "exAG" "-update LUdf"
    # Enc=1 Name="My AntiVirus Scan Task" EvType1=2 EvType2=0 Sched=2
    #0 9 * * 6 "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" -n 2 "/Library/Application Support/Symantec/AntiVirus/ScanNotification.app/Contents/scheduledScanner" "    " "NVsi" "SCae" "path" '/' "kydo" "niCE" "long" 0
    # Enc=1 Name="My Product Update Task" EvType1=1 EvType2=0 Sched=3
    0 8 * * * "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" 3 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" "    " "oapp" "aevt" "exAG" "-update LUlu"
    #SqzS END SYMANTEC CRON ENTRIES
Safari extensions
    Open in Internet Explorer
    - com.parallels.openinie
Widgets
    TimeCalc
    eCalc_Scientific
iCloud errors
    bird 137
    cloudd 18
    storedownloadd 2
    CallHistorySyncHelper 2
Continuity errors
    lsuseractivityd 21
    sharingd 11
Restricted files: 10847
Lockfiles: 19
High file counts
    Desktop: 84
Accessibility
    Keyboard Zoom: On
    Scroll Zoom: On
Contents of /Library/LaunchAgents/com.canon.MFManager.plist
    - mod date: May 22 05:23:32 2012
    - checksum: 290641261
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.canon.MFManager</string>
    <key>Program</key>
    <string>/Applications/Canon Utilities/ImageBrowser EX/ExtApp/MFManager.app/Contents/MacOS/MFManager</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Canon Utilities/ImageBrowser EX/ExtApp/MFManager.app/Contents/MacOS/MFManager</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
Contents of /Library/LaunchAgents/com.divx.dms.agent.plist
    - mod date: Nov 17 02:11:48 2014
    - checksum: 637650676
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.divx.dms.agent</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/DivX/DivXMediaServer.app/Contents/MacOS/DivXMediaServer</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
Contents of /Library/LaunchAgents/com.divx.update.agent.plist
    - mod date: May 19 16:24:29 2014
    - checksum: 3867571547
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.divx.update.agent</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Application Support/DivX/DivXUpdate.app/Contents/MacOS/DivXUpdate</string>
    <string>/silent</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>10800</integer>
    </dict>
    </plist>
Contents of /Library/LaunchAgents/com.kodak.BonjourAgent.plist
    - mod date: Sep 21 01:39:00 2012
    - checksum: 2625351456
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Kodak Version</key>
    <string>7.1.6.10</string>
    <key>Label</key>
    <string>com.kodak.BonjourAgent</string>
    <key>OnDemand</key>
    <false/>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Printers/Kodak/AiO_Printers/KodakAiOBonjourAgent.app/Contents/ MacOS/KodakAiOBonjourAgent</string>
    </array>
    <key>ServiceIPC</key>
    <true/>
    </dict>
    </plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
    - mod date: Feb 15 11:22:20 2014
    - checksum: 2857777334
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.oracle.java.Java-Updater</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
    <string>-bgcheck</string>
    </array>
    <key>StandardErrorPath</key>
    <string>/dev/null</string>
    <key>StandardOutPath</key>
    <string>/dev/null</string>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>71</integer>
    <key>Minute</key>
    <integer>54</integer>
    <key>Weekday</key>
    <integer>5</integer>
    </dict>
    </dict>
    ...and 1 more line(s)
Contents of /Library/LaunchAgents/com.parallels.mobile.prl_deskctl_agent.launchagent.plist
    - mod date: Feb 24 10:45:51 2015
    - checksum: 1795713191
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>EnableTransactions</key>
    <true/>
    <key>KeepAlive</key>
    <dict>
    <key>PathState</key>
    <dict>
    <key>/etc/com.parallels.mobile.prl_deskctl_agent.launchd</key>
    <true/>
    </dict>
    </dict>
    <key>Label</key>
    <string>com.parallels.mobile.prl_deskctl_agent.launchagent</string>
    <key>LimitLoadToSessionType</key>
    <array>
    <string>Aqua</string>
    <string>LoginWindow</string>
    </array>
    <key>Program</key>
    <string>/Applications/Parallels Access.app/Contents/MacOS/Parallels Access Agent.app/Contents/MacOS/prl_deskctl_agent</string>
    </dict>
    </plist>
Contents of /Library/LaunchAgents/com.wacom.wacomtablet.plist
    - mod date: Oct 11 17:37:46 2013
    - checksum: 2972905917
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>EnvironmentVariables</key>
    <dict>
    <key>RUN_WITH_LAUNCHD</key>
    <string>1</string>
    </dict>
    <key>KeepAlive</key>
    <dict>
    <key>SuccessfulExit</key>
    <true/>
    </dict>
    <key>Label</key>
    <string>com.wacom.wacomtablet</string>
    <key>LimitLoadToSessionType</key>
    <array>
    <string>Aqua</string>
    <string>LoginWindow</string>
    </array>
    <key>Program</key>
    <string>/Library/Application Support/Tablet/WacomTabletSpringboard</string>
    <key>RunAtLoad</key>
    <true/>
    ...and 4 more line(s)
Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist
    - mod date: Aug 11 16:52:54 2014
    - checksum: 2451978492
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>org.macosforge.xquartz.startx</string>
    <key>ProgramArguments</key>
    <array>
    <string>/opt/X11/lib/X11/xinit/launchd_startx</string>
    <string>/opt/X11/bin/startx</string>
    <string>--</string>
    <string>/opt/X11/bin/Xquartz</string>
    </array>
    <key>Sockets</key>
    <dict>
    <key>org.macosforge.xquartz:0</key>
    <dict>
    <key>SecureSocketWithKey</key>
    <string>DISPLAY</string>
    </dict>
    </dict>
    <key>ServiceIPC</key>
    <true/>
    <key>EnableTransactions</key>
    <true/>
    ...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.autodesk.backburner_manager.plist
    - mod date: Feb 4 12:44:56 2013
    - checksum: 3394451584
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>KeepAlive</key>
    <dict>
    <key>PathState</key>
    <dict>
    <key>/usr/discreet/backburner/nrapi.conf</key>
    <true/>
    </dict>
    </dict>
    <key>Label</key>
    <string>com.autodesk.backburner_manager</string>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/discreet/backburner/backburnerManager</string>
    </array>
    </dict>
    </plist>
Contents of /Library/LaunchDaemons/com.autodesk.backburner_server.plist
    - mod date: Feb 4 12:44:56 2013
    - checksum: 2405015914
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>KeepAlive</key>
    <dict>
    <key>PathState</key>
    <dict>
    <key>/usr/discreet/backburner/nrapi.conf</key>
    <true/>
    </dict>
    </dict>
    <key>Label</key>
    <string>com.autodesk.backburner_server</string>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/discreet/backburner/backburnerServer</string>
    </array>
    <key>Nice</key>
    <integer>18</integer>
    </dict>
    </plist>
Contents of /Library/LaunchDaemons/com.autodesk.backburner_start.plist
    - mod date: Feb 4 12:44:56 2013
    - checksum: 597826117
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>RunAtLoad</key>
    <true/>
    <key>Label</key>
    <string>com.autodesk.backburner_start</string>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/discreet/backburner/backburner</string>
    <string>boot</string>
    </array>
    </dict>
    </plist>
Contents of /Library/LaunchDaemons/com.makerbot.conveyor.plist
    - mod date: Dec 2 11:47:26 2013
    - checksum: 147573995
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
        <key>Disabled</key>
        <false/>
        <key>Label</key>
        <string>com.makerbot.conveyor.daemon</string>
        <key>WorkingDirectory</key>
        <string>/Library/MakerBot</string>
        <key>ProgramArguments</key>
        <array>
            <string>/Library/MakerBot/conveyor-svc</string>
            <string>--config_file</string>
            <string>/Library/MakerBot/conveyor.conf</string>
        </array>
        <key>KeepAlive</key>
        <true/>
        <key>EnvironmentVariables</key>
        <dict/>
        <key>RunAtLoad</key>
        <true/>
        <key>UserName</key>
        <string>_conveyor</string>
    </dict>
    ...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.parallels.mobile.dispatcher.launchdaemon.plist
    - mod date: Feb 24 10:45:50 2015
    - checksum: 1994226602
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>ExitTimeOut</key>
    <integer>150</integer>
    <key>Label</key>
    <string>com.parallels.mobile.dispatcher.launchdaemon</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Parallels Access.app/Contents/MacOS/Parallels Access Dispatcher Service.app/Contents/MacOS/prl_pm_service</string>
    <string>-e</string>
    <string>--logfile</string>
    <string>/var/log/prl_disp_service_server.log</string>
    <string>--pidfile</string>
    <string>/var/run/prl_pm_service.pid</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
Contents of /Library/LaunchDaemons/com.parallels.mobile.kextloader.launchdaemon.plist
    - mod date: Feb 24 10:45:51 2015
    - checksum: 3938648138
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>ExitTimeOut</key>
    <integer>150</integer>
    <key>Label</key>
    <string>com.parallels.mobile.kextloader.launchdaemon</string>
    <key>ProgramArguments</key>
    <array>
            <string>/sbin/kextload</string>
    <string>/Applications/Parallels Access.app/Contents/Library/Extensions/10.9/prl_virtual_sound.kext</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
Contents of /private/etc/ssh_config
    - mod date: Nov 19 19:03:16 2012
    - checksum: 1281775184
     Host *
       SendEnv LANG LC_*
    Host *
        XAuthLocation /opt/X11/bin/xauth
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
    - mod date: Jan 20 19:45:18 2011
    - checksum: 408149527
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
    - mod date: Jan 29 16:03:43 2010
    - checksum: 2544798274
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Reader 8/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
    - mod date: Sep 11 18:20:35 2011
    - checksum: 2170691092
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Reader 9/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
    - mod date: Oct 19 12:47:52 2009
    - checksum: 10744905
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.adobe.ARM.UUID</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>StartInterval</key>
    <integer>12600</integer>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist
    - mod date: Jan 30 08:36:08 2015
    - checksum: 1189540302
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.apple.FolderActions.folders</string>
    <key>Program</key>
    <string>/usr/bin/osascript</string>
    <key>ProgramArguments</key>
    <array>
    <string>osascript</string>
    <string>-e</string>
    <string>tell application "Folder Actions Dispatcher" to tick</string>
    </array>
    <key>WatchPaths</key>
    <array/>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist
    - mod date: Dec 18 09:24:48 2008
    - checksum: 3493273791
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.apple.Safari</string>
    <key>LimitLoadToSessionType</key>
    <string>Aqua</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
    <string>--sync</string>
    <string>com.apple.Safari</string>
    <string>--entitynames</string>
    <string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
    </array>
    <key>RunAtLoad</key>
    <false/>
    <key>ThrottleInterval</key>
    <integer>60</integer>
    <key>WatchPaths</key>
    <array>
    <string>/Users/USER/Library/Safari/Bookmarks.plist</string>
    </array>
    </dict>
    ...and 1 more line(s)
Contents of Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist
    - mod date: Dec 15 10:55:51 2014
    - checksum: 3001252484
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.citrixonline.GoToMeeting.G2MUpdate</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/CitrixOnline/GoToMeeting/G2MUpdate</string>
    </array>
    <key>StartInterval</key>
    <integer>3660</integer>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.parallels.mobile.startgui.launchagent.plist
    - mod date: Mar 10 23:00:25 2015
    - checksum: 662430762
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>ExitTimeOut</key>
    <integer>150</integer>
    <key>Label</key>
    <string>com.parallels.mobile.startgui.launchagent</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Applications/Parallels Access.app/Contents/MacOS/prl_deskctl_wizard</string>
            <string>--autorun</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
Contents of Library/LaunchAgents/com.valvesoftware.steamclean.plist
    - mod date: Mar 7 15:48:06 2014
    - checksum: 1327160095
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>Label</key>
    <string>com.valvesoftware.steamclean</string>
    <key>Program</key>
    <string>/Users/USER/Library/Application Support/Steam/SteamApps/steamclean</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/USER/Library/Application Support/Steam/SteamApps/steamclean</string>
    <string>Public</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    <key>SteamContentPaths</key>
    <array>
    <string>/Users/USER/Library/Application Support/Steam/SteamApps</string>
    </array>
    <key>WatchPaths</key>
    <array>
    <string>/Applications/Steam.app</string>
    </array>
    </dict>
    </plist>
App extensions
    com.google.GoogleDrive.FinderSyncAPIExtension
    com.parallels.desktop.console.Resource-Monitor
Installations
    Topaz Detail2: 11/15/12, 2:58 PM
    Topaz DeNoise 5: 11/15/12, 2:57 PM
    Topaz Adjust 5: 1

Help, file error preventing me from opening project. Overwrite save as new?

Hi there, I've been working on a big project - saving locally and backing up at night, but now my daily file is corrupted and won't open... I'm getting the following
Do you want to overwrite the file or save as a new file?
When I select "Overwrite" or a File Save As, I get the following message in response:
Adobe Captivate could not open the file because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
I'm using captivate 3. I wasn't doing anything other than trying to save the file at an interval through out the day as I always do.
I have plenty of hard drive space - so that is not the issue. I did move the project it off and delete it from the original source and try to reopen...any other suggestions or explanations for why this is happening?

Will try, Tom. I ended up just force quitting , which I lost my project.
Another question: I'm working in Photoshop Elements importing into FCE. I was told by Apple to work in 720 x 540. I created cute frames and borders around my pics. On the computer looks great, disc image looked great but when I burned to dvd, I lost most of my frames, borders. Is there any way to resize so that the borders, etc. can be seen without having to redo from scratch? Need to get this to a friend by tomorrow so I'm in a crunch for time.
Thanks so much!
Susie

Hairline Frame Borders

Similar Messages

Maybe you are looking for