Hal and dbus not starting
They are both in daemons...and for /etc/rc.d/hal restart it faisl same with dbus and with using 'start' instead of 'restart'.
/usr/sbin/hald --daemon=no --verbose=yes gives me this:
/usr/sbin/hald --daemon=no --verbose=yes
14:31:01.105 [i] hald.c:532: hal 0.5.9
14:31:01.106 [i] hald.c:597: Will not daemonize
14:31:01.106 [i] hald_dbus.c:4806: local server is listening at unix:abstract=/var/run/hald/dbus-JQyZPmcfA6,guid=4867547682ff4e78d054ad0046608205
Runner started - allowed paths are '/usr/lib/hal:/usr/lib/hal/scripts:/usr/bin'
14:31:01.112 [i] hald_runner.c:299: Runner has pid 5829
14:31:01.113 [W] ci-tracker.c:200: Could not get uid for connection: org.freedesktop.DBus.Error.NameHasNoOwner Could not get UID of name 'org.freedesktop.DBus': no such name
14:31:01.116 [E] hald_dbus.c:4461: Cannot get caller info for org.freedesktop.DBus
14:31:01.116 [i] hald_runner.c:180: runner connection is 0x8091888
14:31:01.117 [i] mmap_cache.c:251: cache mtime is 1180561064
Error binding udev_event socket: Address already in use
And when trying to start dbus with /etc/rc.d/dbus restart i get this when it fails:
Failed to start message bus: Failed to bind socket "/var/run/dbus/system_bus_socket": Address already in use
Any suggestions?
If you think it's a common problem how about filing a bug report. Would likely help more people than just posting in the forum. Just a suggestion.
Similar Messages
-
My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?
- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line -
Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?
Yes, your battery is likely toast and in need of replacement. Not much else for troubleshooting here. Sorry.
B-rock -
please help me my ipod nano 7g went off and will not start, this happened after I connect to my computer, my ipod will restart and I no longer turn on. what I do?
Hey saintbless,
Thanks for the question. The following article outlines troubleshooting information for iPod nano. While it mostly refers to the 6th generation, most steps apply for your model as well:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/TS3474
Will not turn on or screen remains dark
- Connect iPod to power for at least ten minutes to ensure that the battery has enough charge to allow iPod to turn on.
- If iPod does not turn on after ten minutes, try resetting the device while it is still connected to power. Reset the iPod by holding down the Sleep/Wake button and the Volume Down button for at least eight seconds or until you see the Apple logo appear.
- If the Apple logo appears on the display, connect iPod to a computer and verify that it appears in iTunes and can play music. If iPod appears in iTunes and can play music, no further troubleshooting is needed.
- If the screen remains dark and will not turn on, then your iPod may need service.
Thanks,
Matt M. -
Firefox will not start, or allow windows xp to uninstall the program. When I attempt to start the program, firefox says "your computer must be restarted to complete a previous upgrade of firefox. do you want to reboot now? It gives the same message after rebooting, and will not start, or uninstall. I also downloaded it again, same thing.
== This happened ==
Every time Firefox opened
== I downloaded an update.Follow '''''cor-el's''''' advice in this post:
https://support.mozilla.com/en-US/forum/1/606173 -
My Mac Book Pro started having issues. I tried to relaod the operating system and it worked for a moment. When I tried to do a time machine back up it failed.
Now itr Shuts down at startup attempt. Tried reloading OSX and will not start up after that.Dr.Conga,
did you try to do a Time Machine backup from your MacBook Pro, or a Time Machine restoration to it?
Are you trying to reload your current version of OS X (10.7.4, to judge from your signature), or are you trying to reload the version of Mac OS X that came on the grey installation DVDs that originally came with your MacBook Pro? -
Dispatcher and server0 not started.
Hi,
After java upgrade dispatcher and server0 not started.
Since Server0 was not running, Note 1163719 does not help.
Is there other solution?
trc file: "/usr/sap/BWT/DVEBMGS10/work/dev_dispatcher", trc level: 1, release: "700"
node name : ID107195100
pid : 4200
system name : BWT
system nr. : 10
started at : Mon Apr 26 06:42:09 2010
arguments :
arg[00] : /usr/sap/BWT/SYS/exe/run/jlaunch
arg[01] : pf=/usr/sap/BWT/SYS/profile/BWT_DVEBMGS10_B604026C
arg[02] : -DSAPINFO=BWT_10_dispatcher
arg[03] : pf=/usr/sap/BWT/SYS/profile/BWT_DVEBMGS10_B604026C
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=65000
arg[06] : -DSAPSYSTEM=10
arg[07] : -DSAPSYSTEMNAME=BWT
arg[08] : -DSAPMYNAME=B604026C_BWT_10
arg[09] : -DSAPPROFILE=/usr/sap/BWT/SYS/profile/BWT_DVEBMGS10_B604026C
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
Mon Apr 26 06:42:09 2010
*** WARNING => INFO: Unknown property instance.box.number=BWTDVEBMGS10b604026c
*** WARNING => INFO: Unknown property
*** WARNING => INFO: Unknown property
*** WARNING => INFO: Unknown property instance.system.id=10
JStartupReadInstanceProperties: read instance properties /usr/sap/BWT/DVEBMGS10/j2ee/cluster/instance.properties
-> ms host : B604026C
-> ms port : 3920
-> OS libs : /usr/sap/BWT/DVEBMGS10/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files : /usr/sap/BWT/DVEBMGS10/j2ee/cluster/instance.properties
Instance properties
-> ms host : B604026C
-> ms port : 3920
-> os libs : /usr/sap/BWT/DVEBMGS10/j2ee/os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> bootstrap : /usr/sap/BWT/DVEBMGS10/j2ee/cluster/instance.properties
-> bootstrap_ID10719510 : /usr/sap/BWT/DVEBMGS10/j2ee/cluster/instance.properties
-> bootstrap_ID10719515 : /usr/sap/BWT/DVEBMGS10/j2ee/cluster/instance.properties
Worker nodes
-> ID107195100 : /usr/sap/BWT/DVEBMGS10/j2ee/cluster/instance.properties
-> ID107195150 : /usr/sap/BWT/DVEBMGS10/j2ee/cluster/instance.properties
JLaunchRequestQueueInit: create named pipe for ipc
JLaunchRequestQueueInit: create pipe listener thread
JLaunchRequestFunc: Thread 258 started as listener thread for np messages.
WaitSyncSemThread: Thread 515 started as semaphore monitor thread.
SigISetDefaultAction : default handling for signal 20
JLaunchInitSignalHandling: installing signal handler for SIGQUIT
Mon Apr 26 06:42:12 2010
NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
CPIC (version=700.2009.02.11)
*** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx2048m
Node: dispatcher java home is set by profile parameter
Java Home: /QIBM/ProdData/Java400/jdk14
JStartupIReadSection: read node properties
-> node name : dispatcher
-> node type : dispatcher
-> node execute : yes
-> jlaunch parameters :
-> java path : /QIBM/ProdData/Java400/jdk14
-> java parameters : -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Djco.jarm=1 -verbose:gc -Djava.compiler=jitc -Dos400.run.mode=jitc -Dos400.disable.explicit.gc -Djava.ext.dirs=/usr/sap/BWT/SYS/j2ee/ext -Drdbms.driverLocation=/usr/sap/BWT/SYS/jdbc/tbx/jt400.jar
-> java vm version : 1.4.2
-> java vm vendor : Classic VM (IBM Corporation)
-> java vm type : shutdown timeout : 120000
JLaunchISetDebugMode: set debug mode
JStartupIGetILEExecutablePath: original setting of environment variable PATH in ILE: /usr/sap/BWT/SYS/exe/run:/QOpenSys/usr/bin:/usr/ccs/bin:/QOpenSys/usr/bin/X11:/usr/sbin:/usr/bin:.
JHVM_SetExecutablePath: Successfully set in ILE: PATH=/QIBM/ProdData/Java400/jdk14/bin:/usr/sap/BWT/DVEBMGS10/j2ee/os_libs:/usr/sap/BWT/SYS/exe/run:/QOpenSys/usr/bin:/usr/ccs/bin:/QOpenSys/usr/bin/X11:/usr/sbin:/usr/bin:.
JStartupIGetJ2EELibrary: Default J2EE library computed as: SAPJ2EE10.
JStartupIGetILELibraryPath: original setting of environment variable LIBPATH in ILE: /usr/sap/BWT/SYS/exe/run
JHVM_SetLibraryPath: Successfully set in ILE: LIBPATH=/QIBM/ProdData/Java400/jdk14/PASE64/lib:/QSYS.LIB/SAPJ2EE10.LIB:/usr/sap/BWT/DVEBMGS10/j2ee/os_libs:/usr/sap/BWT/SYS/exe/run
JLaunchIStartFunc: Thread 772 started as Java VM thread.
JStartupIPaseInitJavaEnvironment: QIBM_USE_DESCRIPTOR_STDIO=N already set
JStartupIPaseInitJavaEnvironment: Setting QIBM_USE_DESCRIPTOR_STDIO=Y
JStartupIPaseInitJavaEnvironment: QIBM_USE_DESCRIPTOR_STDIO=N already set in ILE
JStartupIPaseInitJavaEnvironment: Setting QIBM_USE_DESCRIPTOR_STDIO=Y in ILE
JStartupIPaseInitJavaEnvironment: Setting QIBM_PASE_DESCRIPTOR_STDIO=B
JStartupIPaseInitJavaEnvironment: Setting QIBM_PASE_DESCRIPTOR_STDIO=B in ILE
JStartupIPaseInitJavaEnvironment: QIBM_JAVA_PASE_ALLOW_PREV=1 already set
JStartupIPaseInitJavaEnvironment: QIBM_JAVA_PASE_ALLOW_PREV=1 already set in ILE
JStartupIPaseInitJavaEnvironment: PASE_THREAD_ATTACH=Y already set
JStartupIPaseInitJavaEnvironment: PASE_THREAD_ATTACH=Y already set in ILE
JStartupIPaseInitJavaEnvironment: QIBM_JAVA_PASE_STARTUP=/usr/lib/start64 already set
JStartupIPaseInitJavaEnvironment: QIBM_JAVA_PASE_STARTUP=/usr/lib/start64 already set in ILE
JHVM_LoadJavaVM: VM Arguments of node
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -Djava.security.policy=./java.policy
-> arg[ 4]: -Djava.security.egd=file:/dev/urandom
-> arg[ 5]: -Djco.jarm=1
-> arg[ 6]: -verbose:gc
-> arg[ 7]: -Djava.compiler=jitc
-> arg[ 8]: -Dos400.run.mode=jitc
-> arg[ 9]: -Dos400.disable.explicit.gc
-> arg[ 10]: -Djava.ext.dirs=/usr/sap/BWT/SYS/j2ee/ext
-> arg[ 11]: -Drdbms.driverLocation=/usr/sap/BWT/SYS/jdbc/tbx/jt400.jar
-> arg[ 12]: -Dsys.global.dir=/sapmnt/BWT/global
-> arg[ 13]: -Dapplication.home=/sapmnt/BWT/exe
-> arg[ 14]: -Djava.class.path=/usr/sap/BWT/SYS/exe/run/jstartup.jar:/usr/sap/BWT/SYS/exe/run/jvmx.jar:./bin/boot/boot.jar:./bin/system/bytecode.jar:.
-> arg[ 15]: -Djava.library.path=/QIBM/ProdData/Java400/jdk14/PASE64/lib:/QSYS.LIB/SAPJ2EE10.LIB:/usr/sap/BWT/DVEBMGS10/j2ee/os_libs:/usr/sap/BWT/SYS/exe/run:/usr/sap/BWT/SYS/exe/run
-> arg[ 16]: -Dmemory.manager=2048M
-> arg[ 17]: -Xmx2048M
-> arg[ 18]: -Xms64M
-> arg[ 19]: -DLoadBalanceRestricted=no
-> arg[ 20]: -Djstartup.mode=JCONTROL
-> arg[ 21]: -Djstartup.ownProcessId=4200
-> arg[ 22]: -Djstartup.ownHardwareId=G1307749423
-> arg[ 23]: -Djstartup.whoami=dispatcher
-> arg[ 24]: -Djstartup.debuggable=no
-> arg[ 25]: -DSAPINFO=BWT_10_dispatcher
-> arg[ 26]: -DSAPSTART=1
-> arg[ 27]: -DCONNECT_PORT=65000
-> arg[ 28]: -DSAPSYSTEM=10
-> arg[ 29]: -DSAPSYSTEMNAME=BWT
-> arg[ 30]: -DSAPMYNAME=B604026C_BWT_10
-> arg[ 31]: -DSAPPROFILE=/usr/sap/BWT/SYS/profile/BWT_DVEBMGS10_B604026C
-> arg[ 32]: -DFRFC_FALLBACK=ON
-> arg[ 33]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 34]: -DSAPSTARTUP=1
-> arg[ 35]: -DSAPSYSTEM=10
-> arg[ 36]: -DSAPSYSTEMNAME=BWT
-> arg[ 37]: -DSAPMYNAME=B604026C_BWT_10
-> arg[ 38]: -DSAPDBHOST=B604026C
-> arg[ 39]: -Dj2ee.dbhost=B604026C
Mon Apr 26 06:42:18 2010
GC: initial heap(KB) 65536; maximum heap(KB) 2097152; virtual machine identifier CD01A30F83003900; heap identifier CD01A30F83003900.
GC 1: starting collection, reason external thread attached.
Mon Apr 26 06:42:19 2010
JHVM_LoadJavaVM: Java VM created OK.
GC 1: collection starting 26/04/10 06:42:19
GC 1: live objects 3831; collected objects 1687; collected(KB) 160.
GC 1: queued for finalization 0; total soft references 3; cleared soft references 0.
GC 1: current heap(KB) 7644; current threshold(KB) 65536.
GC 1: collect (milliseconds) 469.
GC 1: current cycle allocation(KB) 3278; previous cycle allocation(KB) 4114.
GC 1: total weak references 0; cleared weak references 0.
GC 1: total final references 6; cleared final references 0.
GC 1: total phantom references 0; cleared phantom references 0.
GC 1: total JNI global weak references 0; cleared JNI global weak references 0.
GC 1: collection ending 26/04/10 06:42:19
JHVM_BuildArgumentList: main method arguments of node
Mon Apr 26 06:42:35 2010
JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
Mon Apr 26 06:42:41 2010
JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
Mon Apr 26 06:42:42 2010
JLaunchISetClusterId: set cluster id 107195100
Mon Apr 26 06:42:43 2010
JLaunchISetState: change state from to
JLaunchISetState: change state from to
Mon Apr 26 06:44:21 2010
JLaunchISetHttpPort: set http port 51000
JLaunchISetHttpsPort: set https port 51001
Signal 11 encountered.
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x0x181d70120
=> Stack address = 0x181b542b0
=> Stack low = 0x181b519b0
=> Stack high = 0xffffffffffff1c0
=> Stack Trace:
pthread_mutex_init() at 0x9000000002acb64
Sem2Init() at 0x90000001bdb522c
SpinLockSemInit1() at 0x90000001bdaa7cc
SpinLockSemInit_37_8() at 0x90000001bdad828
GetSemAdm() at 0x90000001bda9c3c
SemInMgt() at 0x90000001bdad560
AlAttachShm_Ext() at 0x90000001bda6ae0
AlCreateAttachShm_Ext() at 0x90000001bda7204
AlAPIIOpenMonitorSegment_Ext() at 0x90000001bda8fdc
openMonitoringSegment_Int__FP7JNIEnv_iPUsN22() at 0x90000001bceae68
Java_com_sap_mona_api_JMonAPI_openMonitoringSegment__ILjava_lang_String_2II() at 0x90000001bceb4ec
ÿÿN? at 0x36d0
!!! Invalid stack address encountered: 0x0
!!! Stack corrupted.
=> CPU Registers:
msr = 0x800000000000f032 iar = 0x09000000002acb64
ctr = 0x0000000000000008 lr = 0x090000001bdb524c
xer = 0x0000000002000010 cr = 0x0000000082802883
r00 = 0x0000000000000000 r01 = 0x0000000181b542b0
r02 = 0x09001000a00e1ed8 r03 = 0x0000000000000024
r04 = 0x09001000a00df224 r05 = 0x0000000000000000
r06 = 0x09000000002c1500 r07 = 0x0000000000000000
r08 = 0x000000001015c077 r09 = 0x000000001015c077
r10 = 0x0000000100000000 r11 = 0x0000000000000000
r12 = 0x09001000a00e1610 r13 = 0x0000000181b55994
r14 = 0x0000000000000000 r15 = 0x0000000000000402
r16 = 0x0000000000000000 r17 = 0x0000000000000000
r18 = 0x0000000000000402 r19 = 0x0000000000000000
r20 = 0x09001000a65e4780 r21 = 0x0000000000000000
r22 = 0x0000000000000000 r23 = 0x09001000a65dedc8
r24 = 0x09001000a64fe590 r25 = 0x09001000
Library |(SRV)PGM |Module |Function/Statement No.
|----
|----
|----
a642b7c8
r26 = 0x09001000a64fe5a0 r27 = 0x0000000000000000
r28 = 0x09001000a65dedc0 r29 = 0x0000000000000028
r30 = 0x09001000a642b7c8 r31 = 0x0000000181b543b0
Mon Apr 26 06:44:26 2010
***LOG Q0E=> SigIGenAction, signal ( 11)
Best regards
ibrahim gurbuzHi Ibrahim,
SAP note 785489 should solve your problem...
Best regards,
Christoph -
I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.
Query by serial number
Apple's warrenty database will identify the type of Mac you have. Your serial number is securely sent, but you get only the name of your machine.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer ) -
Why when I tried to update itunes it crashed and now I get a MSVCR80.dll was not found and can not start my itunes any more?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
MacBook Pro has a grey screen with circle and slash and will not start up or start into safe mode.
MacBook Pro has started to get a grey screen with circle and slash and will not start up or start into safe mode. This happened once previously, however, it allowed a safe mode reboot and then worked for a week or so. While utilzing the machine, it started with the spinning beach ball for about 5 minutes, went into a shut down mode and then rebooted and came back up with the grey screen with a circle and slash after a few minutes. For the past three days it has been stuck and will not allow it to boot into safe mode. Any idea or suggestions?
Try starting the MBP with the OPTION key down. If you see two HDD icons, select the recovery Icon. From the 4 option menu, select Disk Utility. Select Disk Utility>First Aid and run Verify and Repair.
If you cannot get into the recovery partition, make an appointment at an Apple store genius bar.
Ciao. -
My iPhone 4s is stuck on the apple logo page and will not start up is there anything i can do to fix this problem ?
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
I have reset all the information in my iphone 3GS but the phone hangup on the apple icon and does not start an I reset the phone with ON/OFF buttom and the home buttom but still the problem exist
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore from Backup.. Restore as New...
Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
My ipad2 shuts down completely after I press the sleep button and does not start.... Help please
My ipad2 shuts down completely after I press the sleep button and does not start.... Help please
This started since the latest update!!!!!!!!!!!!!!Hi Alkaf,
Welcome to Apple Support Communities.
It sounds like your iPad will not turn on. Take a look at the iPhone article linked below, it provides tips that will help resolve power issues for both iPhones and iPads.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
-Jason -
When i start my mac system its produce sound and its not started.
when i start my mac system its produce sound and its not started. what i do for solving this problem. can anybody help me?
can any body tell me what is problem occour in my mac?https://discussions.apple.com/thread/3054726?tstart=0
Maybe you are looking for
-
Applescript won't run as .app but runs fine in AppleScript Editor
I'm an experienced web developer.. but total applescript noob. so forgive me if this is a silly question. I'm calling my script it from Flash via fscommand to launch a PDF using finder, rather than a browser. The script works great from AppleScript E
-
After ios 8 update on ipad mini. None of my apps connect to app store for in app purchases.
In app purchases worked before ios 8 update was installed on ipad mini. Restrictions are turned off. Can login to app store and purchase and download apps. Can't do in app purchases. Anybody else have this problem?
-
Color difference in web gallery
I am having trouble matching color from my images in Bridge or PS (CS4) to the photos that appear when I make a web gallery using CS4. The photos have been converted to sRGB and look vivid in Bridge or Photoshop. However when they are converted in
-
Posting_interface_clearing Fb05 transfer posting of invoices with cash disc
Hi We have a customised program that uses function module POSTING_INTERFACE_CLEARING to do a FB05 transfer posting with clearing of invoices to a liabaility GL account It works perfectly except for the following scenario When we have invoices in USD
-
Report pianter report issue (Cost center Heirarcy issue)
Hi, Please consider this issue as an emergency and reply, when I execute a report painter report for highest cost center heirarchy, all cost centers are appearing at level 2, (cost center group level) in the report, but when I execute the same report